uart_register_driver call binds the driver to a specific device
node through tty_register_driver call. This should typically happen
during device probe call.

In a multiplatform scenario, it is possible that multiple serial
drivers are part of the kernel. Currently the driver registration fails
if multiple serial drivers with same default major/minor numbers are
included in the kernel.

A typical case is observed with amba-pl011 and samsung-uart drivers.
Signed-off-by: NTushar Behera <tushar.behera@linaro.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

config: x86_64-randconfig-x006 (attached as .config)

All warnings:

 drivers/tty/serial/max310x.c: In function 'max310x_probe':
>> drivers/tty/serial/max310x.c:1240:1: warning: label 'out_uart' defined but not used [-Wunused-label]
Reported-by: Nkbuild test robot <fengguang.wu@intel.com>
Signed-off-by: NAlexander Shiyan <shc_work@mail.ru>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

config: make ARCH=alpha allyesconfig

All error/warnings:

 drivers/tty/serial/max310x.c: In function 'max310x_ioctl':
>> drivers/tty/serial/max310x.c:905:7: error: 'TIOCSRS485' undeclared (first use in this function)
 drivers/tty/serial/max310x.c:905:7: note: each undeclared identifier is reported only once for each function it appears in
>> drivers/tty/serial/max310x.c:906:3: error: implicit declaration of function 'copy_from_user' [-Werror=implicit-function-declaration]
>> drivers/tty/serial/max310x.c:929:7: error: 'TIOCGRS485' undeclared (first use in this function)
>> drivers/tty/serial/max310x.c:938:3: error: implicit declaration of function 'copy_to_user' [-Werror=implicit-function-declaration]
 cc1: some warnings being treated as errors
Reported-by: Nkbuild test robot <fengguang.wu@intel.com>
Signed-off-by: NAlexander Shiyan <shc_work@mail.ru>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

The current code only wakes up the processes when the circle
buffer has less data then the WAKEUP_CHARS.

But sometimes, the circle buffer may has data more then the WAKEUP_CHARS,
in such case, the processes will hang.

This patch makes it always wakes up the processes in the TX callback.
Signed-off-by: NHuang Shijie <b32955@freescale.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

This fixes a driver bug which stopped the whole system (in case
of serial console).
This log message is not useful anyway as this information is
printed elsewhere.
Signed-off-by: NNicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Greg,

Please note this patch requires
   n_tty: Fix poll() when TIME_CHAR and MIN_CHAR == 0

Regards,
Peter Hurley
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

We want the tty core fixes in here as well, because other patches depend
on them.
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

The Exar XR17V35x family of UARTs have an additional fractional divisor
register (DLD) which was not being used. Calculate and set this
register for these devices to reduce their baud rate error.
Signed-off-by: NJoe Schultz <jschultz@xes-inc.com>
Signed-off-by: NAaron Sierra <asierra@xes-inc.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

When echoes cannot be flushed to output (usually because the tty
has no more write room) and L_ECHO is subsequently turned off, then
when L_ECHO is turned back on, stale echoes are output.

Output completed echoes regardless of the L_ECHO setting:
  1. before normal writes to that tty
  2. if the tty was stopped by soft flow control and is being
     restarted
Reported-by: NMikulas Patocka <mpatocka@redhat.com>
Cc: <stable@vger.kernel.org> # 3.13.x
Signed-off-by: NPeter Hurley <peter@hurleysoftware.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 8b9ade9f coming from Viresh Kumar "tty: serial: sirfsoc: drop
uart_port->lock before calling tty_flip_buffer_push()" broke sirfsoc uart
driver by knic:

	[    5.129122] BUG: spinlock already unlocked on CPU#0, ip6tables/1331
	[    5.132554]  lock: sirfsoc_uart_ports+0x4/0x8a0, .magic: dead4ead,
	.owner: <none>/-1, .owner_cpu: -1
	[    5.141651] CPU: 0 PID: 1331 Comm: ip6tables Tainted: G
	W  O 3.10.16 #3
	[    5.148866] [<c0013528>] (unwind_backtrace+0x0/0xe0) from
	[<c0010e70>] (show_stack+0x10/0x14)
	[    5.157362] [<c0010e70>] (show_stack+0x10/0x14) from
	[<c01a5e68>] (do_raw_spin_unlock+0x40/0xc8)
	[    5.166125] [<c01a5e68>] (do_raw_spin_unlock+0x40/0xc8) from
	[<c03ff8b4>] (_raw_spin_unlock+0x8/0x40)
	[    5.175322] [<c03ff8b4>] (_raw_spin_unlock+0x8/0x40) from
	[<c0203fcc>] (sirfsoc_uart_pio_rx_chars+0xa4/0xc0)
	[    5.185120] [<c0203fcc>]
	(sirfsoc_uart_pio_rx_chars+0xa4/0xc0) from [<c0204fb8>]
	(sirfsoc_rx_tmo_process_tl+0xdc/0x1e0)
	[    5.195875] [<c0204fb8>]
	(sirfsoc_rx_tmo_process_tl+0xdc/0x1e0) from [<c0024b50>]
	(tasklet_action+0x8c/0xec)
	[    5.205673] [<c0024b50>] (tasklet_action+0x8c/0xec) from
	[<c00242a8>] (__do_softirq+0xec/0x1d4)
	[    5.214347] [<c00242a8>] (__do_softirq+0xec/0x1d4) from
	[<c0024428>] (do_softirq+0x48/0x54)
	[    5.222674] [<c0024428>] (do_softirq+0x48/0x54) from
	[<c0024690>] (irq_exit+0x74/0xc0)
	[    5.230573] [<c0024690>] (irq_exit+0x74/0xc0) from
	[<c000e1e8>] (handle_IRQ+0x6c/0x90)
	[    5.238465] [<c000e1e8>] (handle_IRQ+0x6c/0x90) from
	[<c000d500>] (__irq_svc+0x40/0x70)
	[    5.246446] [<c000d500>] (__irq_svc+0x40/0x70) from
	[<c0092e7c>] (mark_page_accessed+0xc/0x68)
	[    5.255034] [<c0092e7c>] (mark_page_accessed+0xc/0x68) from
	[<c00a2a4c>] (unmap_single_vma+0x3bc/0x550)
	[    5.264402] [<c00a2a4c>] (unmap_single_vma+0x3bc/0x550) from
	[<c00a3b4c>] (unmap_vmas+0x44/0x54)
	[    5.273164] [<c00a3b4c>] (unmap_vmas+0x44/0x54) from
	[<c00a81a8>] (exit_mmap+0xc4/0x1e0)
	[    5.281233] [<c00a81a8>] (exit_mmap+0xc4/0x1e0) from
	[<c001bb78>] (mmput+0x3c/0xdc)
	[    5.288868] [<c001bb78>] (mmput+0x3c/0xdc) from [<c0021b0c>]
	(do_exit+0x30c/0x828)
	[    5.296413] [<c0021b0c>] (do_exit+0x30c/0x828) from
	[<c0022dac>] (do_group_exit+0x4c/0xb0)
	[    5.304653] [<c0022dac>] (do_group_exit+0x4c/0xb0) from
	[<c0022e20>] (__wake_up_parent+0x0/0x18)

Root cause:
the commit dropped uart_port->lock before calling tty_flip_buffer_push(), but in sirfsoc-uart,
sirfsoc_uart_pio_rx_chars() can be called by sirfsoc_rx_tmo_process_tl(). here uart_port->lock
has not been taken yet. so that caused unpaired lock/unlock.

Solution:
This patch is doing a quick fix for that, it adds spin_lock/unlock(&port->lock) protect to
sirfsoc_uart_pio_rx_chars() in sirfsoc_rx_tmo_process_tl() to keep spin_lock/unlock in pair.
Signed-off-by: NQipan Li <Qipan.Li@csr.com>
Signed-off-by: NBarry Song <Baohua.Song@csr.com>
Cc: stable <stable@vger.kernel.org> # 3.12
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Aparently 9865 uses standard BAR encoding scheme (unlike 99xx cards).
Current pci_netmos_9900_setup() uses wrong BAR indices for the 9865 PCI
device, function 2. Using standard BAR indices makes all 6 ports work
for me. Thus disable the NetMos 9900 quirk for NetMos 9865 pci device.

For the reference, here is the relevant part of lspci for my device:

02:07.0 Serial controller: MosChip Semiconductor Technology Ltd. PCI
9865 Multi-I/O Controller (prog-if 02 [16550])
	Subsystem: Device a000:1000
	Flags: bus master, medium devsel, latency 32, IRQ 17
	I/O ports at ac00 [size=8]
	Memory at fcfff000 (32-bit, non-prefetchable) [size=4K]
	Memory at fcffe000 (32-bit, non-prefetchable) [size=4K]
	Capabilities: [48] Power Management version 2
	Kernel driver in use: serial

02:07.1 Serial controller: MosChip Semiconductor Technology Ltd. PCI
9865 Multi-I/O Controller (prog-if 02 [16550])
	Subsystem: Device a000:1000
	Flags: bus master, medium devsel, latency 32, IRQ 18
	I/O ports at a800 [size=8]
	Memory at fcffd000 (32-bit, non-prefetchable) [size=4K]
	Memory at fcffc000 (32-bit, non-prefetchable) [size=4K]
	Capabilities: [48] Power Management version 2
	Kernel driver in use: serial

02:07.2 Communication controller: MosChip Semiconductor Technology Ltd.
PCI 9865 Multi-I/O Controller
	Subsystem: Device a000:3004
	Flags: bus master, medium devsel, latency 32, IRQ 19
	I/O ports at a400 [size=8]
	I/O ports at a000 [size=8]
	I/O ports at 9c00 [size=8]
	I/O ports at 9800 [size=8]
	Memory at fcffb000 (32-bit, non-prefetchable) [size=4K]
	Capabilities: [48] Power Management version 2
	Kernel driver in use: serial
Signed-off-by: NDmitry Eremin-Solenikov <dbaryshkov@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Commit eafbe67f,
  n_tty: Refactor input_available_p() by call site
broke poll() when TIME_CHAR(tty) and MIN_CHAR(tty) are both 0.

When TIME_CHAR and MIN_CHAR are both 0, input is available if the
read_cnt is 1 (not 0).
Reported-by: NEric Dumazet <edumazet@google.com>
Tested-by: NEric Dumazet <edumazet@google.com>
Reported-by: NStephane Eranian <eranian@google.com>
Tested-by: NDavid Ahern <dsahern@gmail.com>
Tested-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: NPeter Hurley <peter@hurleysoftware.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

If the gpio is not yet available we better also
defer the probing in the rs485 case.
Signed-off-by: NMichael Grzeschik <m.grzeschik@pengutronix.de>
Signed-off-by: NUwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

CONFIG_PM will be set if either or both CONFIG_PM_SLEEP and
CONFIG_PM_RUNTIME is set. Compiling the driver with !CONFIG_PM_SLEEP causes
following compilation warnings:

drivers/tty/serial/8250/8250_dw.c:404:12: warning: ‘dw8250_suspend’ defined but not used [-Wunused-function]
drivers/tty/serial/8250/8250_dw.c:413:12: warning: ‘dw8250_resume’ defined but not used [-Wunused-function]

Fix this by using CONFIG_PM_SLEEP instead.
Signed-off-by: NMika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Currently the info message about a missing wakeirq for uart is printed
every time the serial driver's startup function is called. This happens
multiple times and not just once.

This can cause lots of extra messages at boot time, slowing things down.  It is
caused by commit 2a0b965c (serial: omap: Add support for optional wake-up)
which was applied for v3.13-rc1.

This patch moves the infomessage to the probe function to display it
only once.
Reported-by: NUwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: NTony Lindgren <tony@atomide.com>
Signed-off-by: NMarkus Pargmann <mpa@pengutronix.de>
Acked-by: NUwe Kleine-König <u.kleine-koenig@pengutronix.de>
Cc: stable <stable@vger.kernel.org> # 3.13
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch adds the devicetree documentation for the Maxim MAX310X UARTs.
Signed-off-by: NAlexander Shiyan <shc_work@mail.ru>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch adds devicetree support for the MAX310X serial driver.
Signed-off-by: NAlexander Shiyan <shc_work@mail.ru>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch removes some unused definitions from driver code and
sort #includes alphabetically.
Signed-off-by: NAlexander Shiyan <shc_work@mail.ru>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch adds support for RS-485 (TIOCSRS485/TIOCGRS485) IOCTLs.
As a result this patch eliminate private driver header.
Signed-off-by: NAlexander Shiyan <shc_work@mail.ru>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Signed-off-by: NAlexander Shiyan <shc_work@mail.ru>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Always register GPIOs and use dynamic GPIO ID assignment.
This is no much worth if GPIOs is not used, but helps remove
private driver header and add DT support in the future.
Additionally, patch adds missing uart_unregister_driver()
call if probe() fails.
Signed-off-by: NAlexander Shiyan <shc_work@mail.ru>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch removes "frequency" parameter from MAX310X platform_data
and uses CLK API for getting clock. Clock type (XTAL/OSC) is
determined by clk name.
Signed-off-by: NAlexander Shiyan <shc_work@mail.ru>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Patch move all SPI-dependent stuff in one place. This include move
PM-function definitions out of CONFIG_SPI_MASTER and move regmap
initialization out of common probe into CONFIG_SPI_MASTER which
may help to add I2C support in the future for this driver.
Signed-off-by: NAlexander Shiyan <shc_work@mail.ru>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Since 93abe8e4 (clk: add non CONFIG_HAVE_CLK routines) code using clk.h
like this driver needs not depend on HAVE_CLK.
Signed-off-by: NBaruch Siach <baruch@tkos.co.il>
Acked-by: NSimon Horman <horms+renesas@verge.net.au>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch removes excess IRQ checks at driver probe().
IRQ validation is already provided by request_threaded_irq().
Signed-off-by: NAlexander Shiyan <shc_work@mail.ru>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch replaces loopback mode support from platform data to
dynamic setup with TIOCMSET ioctl.
Signed-off-by: NAlexander Shiyan <shc_work@mail.ru>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Serial core calls set_termios() after port startup, so there are
no reason to setup port twice.
Signed-off-by: NAlexander Shiyan <shc_work@mail.ru>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

These callbacks were previously used for the IC power initialization.
If this initialization will be needed in the future, it should be
implemented with the regulator API.
Signed-off-by: NAlexander Shiyan <shc_work@mail.ru>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch provide more precisely setup of baud rate generator.
If the result of division has a remainder, we use the multiplier
for the base frequency. Additionally, we report result baud rate
back to serial core.
Signed-off-by: NAlexander Shiyan <shc_work@mail.ru>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Signed-off-by: NAlexander Shiyan <shc_work@mail.ru>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Hardware supported by the driver is only found on SUPERH or
ARCH_SHMOBILE platforms. Restrict non-COMPILE_TEST compilation to them.

Cc: linux-serial@vger.kernel.org
Signed-off-by: NLaurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: NSimon Horman <horms+renesas@verge.net.au>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Remove the -generic suffix from the compatible string in the serial port
DT bindings example.

Cc: devicetree@vger.kernel.org
Signed-off-by: NLaurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: NSimon Horman <horms+renesas@verge.net.au>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Add CONFIG_DEBUG_FS to 'char name' in order to fix the following
build warning, because 'char name' is used only when CONFIG_DEBUG_FS
is enabled.

drivers/tty/serial/pch_uart.c:1765:7: warning: unused variable 'name' [-Wunused-variable]
Signed-off-by: NJingoo Han <jg1.han@samsung.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Fix the following compile warning about cast to pointer from
integer of different size.

drivers/tty/serial/sh-sci.c:2021:19: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast]
Signed-off-by: NJingoo Han <jg1.han@samsung.com>
Acked-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Currently the info message about a missing wakeirq for uart is printed
every time the serial driver's startup function is called. This happens
multiple times and not just once.

This patch moves the infomessage to the probe function to display it
only once.
Acked-by: NTony Lindgren <tony@atomide.com>
Signed-off-by: NMarkus Pargmann <mpa@pengutronix.de>
Acked-by: NUwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Implement the polling functionality for the MSM serial driver.
This allows us to use KGDB on this hardware.

Cc: David Brown <davidb@codeaurora.org>
Signed-off-by: NStephen Boyd <sboyd@codeaurora.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Pull SELinux fixes from James Morris.

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security:
  SELinux:  Fix kernel BUG on empty security contexts.
  selinux: add SOCK_DIAG_BY_FAMILY to the list of netlink message types

Pull vfs fixes from Al Viro:
 "A couple of fixes, both -stable fodder.  The O_SYNC bug is fairly
  old..."

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  fix a kmap leak in virtio_console
  fix O_SYNC|O_APPEND syncing the wrong range on write()