If SA is in the process of acquiring, which indicates this SA is more
promising and precise than the fall back option, i.e. using wild card
source address for searching less suitable SA.

So, here bail out, and try again.
Signed-off-by: NFan Du <fan.du@windriver.com>
Signed-off-by: NSteffen Klassert <steffen.klassert@secunet.com>

Currently we rely on rtnl locking in bond_set_rx_mode(), however it's not
always the case:

RTNL: assertion failed at drivers/net/bonding/bond_main.c (3391)
...
 [<ffffffff81651ca5>] dump_stack+0x54/0x74
 [<ffffffffa029e717>] bond_set_rx_mode+0xc7/0xd0 [bonding]
 [<ffffffff81553af7>] __dev_set_rx_mode+0x57/0xa0
 [<ffffffff81557ff8>] __dev_mc_add+0x58/0x70
 [<ffffffff81558020>] dev_mc_add+0x10/0x20
 [<ffffffff8161e26e>] igmp6_group_added+0x18e/0x1d0
 [<ffffffff81186f76>] ? kmem_cache_alloc_trace+0x236/0x260
 [<ffffffff8161f80f>] ipv6_dev_mc_inc+0x29f/0x320
 [<ffffffff8161f9e7>] ipv6_sock_mc_join+0x157/0x260
...

Fix this by using RCU primitives.
Reported-by: NJoe Lawrence <joe.lawrence@stratus.com>
Tested-by: NJoe Lawrence <joe.lawrence@stratus.com>
CC: Jay Vosburgh <fubar@us.ibm.com>
CC: Andy Gospodarek <andy@greyhouse.net>
Signed-off-by: NVeaceslav Falico <vfalico@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

removes following warnings-
drivers/net/phy/marvell.c:37: WARNING: Use #include <linux/io.h> instead of <asm/io.h>
drivers/net/phy/marvell.c:39: WARNING: Use #include <linux/uaccess.h> instead of <asm/uaccess.h>
Signed-off-by: NAvinash Kumar <avi.kp.137@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

bnx2x makes a dangerous use of skb_is_gso_v6().

It should first make sure skb is a gso packet
Signed-off-by: NEric Dumazet <edumazet@google.com>
Cc: Eilon Greenstein <eilong@broadcom.com>
Acked-by: NDmitry Kravkov <dmitry@broadcom.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Warning(include/net/sock.h:411): No description found for parameter
'sk_max_pacing_rate'

Lets please "make htmldocs" and kbuild bot.
Reported-by: NWu Fengguang <fengguang.wu@intel.com>
Signed-off-by: NEric Dumazet <edumazet@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This makes it possible to use some more advanced queuing
techniques with this driver.

When multi queue support will be added some changes to Byte Queue
handling is needed.
Signed-off-by: NHauke Mehrtens <hauke@hauke-m.de>
Reviewed-by: NEric Dumazet <edumazet@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This makes it possible to use some more advanced queuing
techniques with this driver.
Signed-off-by: NHauke Mehrtens <hauke@hauke-m.de>
Reviewed-by: NEric Dumazet <edumazet@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

- Move sysctl_local_ports from a global variable into struct netns_ipv4.
- Modify inet_get_local_port_range to take a struct net, and update all
  of the callers.
- Move the initialization of sysctl_local_ports into
   sysctl_net_ipv4.c:ipv4_sysctl_init_net from inet_connection_sock.c

v2:
- Ensure indentation used tabs
- Fixed ip.h so it applies cleanly to todays net-next

v3:
- Compile fixes of strange callers of inet_get_local_port_range.
  This patch now successfully passes an allmodconfig build.
  Removed manual inlining of inet_get_local_port_range in ipv4_local_port_range
Originally-by: NSamya <samya@twitter.com>
Acked-by: NNicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: N"Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Mark code path's likely/unlikely based on most common usage.
  * Very few devices use dsa tags.
  * Most traffic is Ethernet (not 802.2)
  * No sane person uses trailer type or Novell encapsulation
Signed-off-by: NStephen Hemminger <stephen@networkplumber.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Remove old legacy comment and weird if condition.
The comment has outlived it's stay and is throwback to some
early net code (before my time). Maybe Dave remembers what it meant.
Signed-off-by: NStephen Hemminger <stephen@networkplumber.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NDavid S. Miller <davem@davemloft.net>

setting fl6.flowi6_flags as zero after memset is redundant, Remove it.
Signed-off-by: NLi RongQing <roy.qing.li@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

There was a bug that netback routines netbk/xenvif_skb_count_slots and
netbk/xenvif_gop_frag_copy disagreed with each other, which caused
netback to push wrong number of responses to netfront, which caused
netfront to eventually crash. The bug was fixed in 6e43fc04
("xen-netback: count number required slots for an skb more carefully").

Commit 6e43fc04 focused on backport-ability. The drawback with the
existing packing scheme is that the ring is not used effeciently, as
stated in 6e43fc04.

skb->data like:
    |        1111|222222222222|3333        |

is arranged as:
    |1111        |222222222222|3333        |

If we can do this:
    |111122222222|22223333    |
That would save one ring slot, which improves ring effeciency.

This patch effectively reverts 6e43fc04. That patch made count_slots
agree with gop_frag_copy, while this patch goes the other way around --
make gop_frag_copy agree with count_slots. The end result is that they
still agree with each other, and the ring is now arranged like:
    |111122222222|22223333    |

The patch that improves packing was first posted by Xi Xong and Matt
Wilson. I only rebase it on top of net-next and rewrite commit message,
so I retain all their SoBs. For more infomation about the original bug
please refer to email listed below and commit message of 6e43fc04.

Original patch:
http://lists.xen.org/archives/html/xen-devel/2013-07/msg00760.htmlSigned-off-by: NXi Xiong <xixiong@amazon.com>
Reviewed-by: NMatt Wilson <msw@amazon.com>
[ msw: minor code cleanups, rewrote commit message, adjusted code
  to count RX slots instead of meta structures ]
Signed-off-by: NMatt Wilson <msw@amazon.com>
Cc: Annie Li <annie.li@oracle.com>
Cc: Wei Liu <wei.liu2@citrix.com>
Cc: Ian Campbell <Ian.Campbell@citrix.com>
[ liuw: rebased on top of net-next tree, rewrote commit message, coding
  style cleanup. ]
Signed-off-by: NWei Liu <wei.liu2@citrix.com>
Cc: David Vrabel <david.vrabel@citrix.com>
Acked-by: NIan Campbell <Ian.Campbell@citrix.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

err is set once, then first code resets it.
  err = tcf_exts_validate(...)
Signed-off-by: NStephen Hemminger <stephen@networkplumber.org>
Acked-by: NJamal Hadi Salim <hadi@mojatatu.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Rather than returning earlier value (EINVAL), return ENOMEM if
kzalloc fails. Found while reviewing to find another EINVAL condition.
Signed-off-by: NStephen Hemminger <stephen@networkplumber.org>
Acked-by: NThomas Graf <tgraf@suug.ch>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

It's a forgotten function declaration, which was removed some time ago
already.

CC: Jay Vosburgh <fubar@us.ibm.com>
CC: Andy Gospodarek <andy@greyhouse.net>
Signed-off-by: NVeaceslav Falico <vfalico@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Conflicts:
	include/linux/netdevice.h

More extern removals from Joe Perches.

Minor conflict with the dev_notify_flags changes which added a new
argument to __dev_notify_flags().
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Conflicts:
	include/net/xfrm.h

Simple conflict between Joe Perches "extern" removal for function
declarations in header files and the changes in Steffen's tree.

Steffen Klassert says:

====================
Two patches that are left from the last development cycle.
Manual merging of include/net/xfrm.h is needed. The conflict
can be solved as it is currently done in linux-next.

1) We announce the creation of temporary acquire state via an asyc event,
   so the deletion should be annunced too. From Nicolas Dichtel.

2) The VTI tunnels do not real tunning, they just provide a routable
   IPsec tunnel interface. So introduce and use xfrm_tunnel_notifier
   instead of xfrm_tunnel for xfrm tunnel mode callback. From Fan Du.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch proposes to remove the IRQF_DISABLED flag
from drivers/net/hamradio/baycom_*

It's a NOOP since 2.6.35 and it will be removed one day.
Signed-off-by: NMichael Opdenacker <michael.opdenacker@free-electrons.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When flags IFF_PROMISC and IFF_ALLMULTI are changed, netlink messages are not
consistent. For example, if a multicast daemon is running (flag IFF_ALLMULTI
set in dev->flags but not dev->gflags, ie not exported to userspace) and then a
user sets it via netlink (flag IFF_ALLMULTI set in dev->flags and dev->gflags, ie
exported to userspace), no netlink message is sent.
Same for IFF_PROMISC and because dev->promiscuity is exported via
IFLA_PROMISCUITY, we may send a netlink message after each change of this
counter.
Signed-off-by: NNicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch only prepares the next one, there is no functional change.
Now, __dev_notify_flags() can also be used to notify flags changes via
rtnetlink.
Signed-off-by: NNicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NFabio Porcedda <fabio.porcedda@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Newer firmware use a new pid and a different interface.
Signed-off-by: NFabio Porcedda <fabio.porcedda@gmail.com>
Acked-by: NBjørn Mork <bjorn@mork.no>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

As mentioned in commit afe4fd06 ("pkt_sched: fq: Fair Queue packet
scheduler"), this patch adds a new socket option.

SO_MAX_PACING_RATE offers the application the ability to cap the
rate computed by transport layer. Value is in bytes per second.

u32 val = 1000000;
setsockopt(sockfd, SOL_SOCKET, SO_MAX_PACING_RATE, &val, sizeof(val));

To be effectively paced, a flow must use FQ packet scheduler.

Note that a packet scheduler takes into account the headers for its
computations. The effective payload rate depends on MSS and retransmits
if any.

I chose to make this pacing rate a SOL_SOCKET option instead of a
TCP one because this can be used by other protocols.
Signed-off-by: NEric Dumazet <edumazet@google.com>
Cc: Steinar H. Gunderson <sesse@google.com>
Cc: Michael Kerrisk <mtk.manpages@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

There are no users left, so it's safe to remove.

CC: Jay Vosburgh <fubar@us.ibm.com>
CC: Andy Gospodarek <andy@greyhouse.net>
Signed-off-by: NVeaceslav Falico <vfalico@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

We don't need the circular loop there and it's the only current user of
bond_next_slave() - so just use the standard bond_for_each_slave().

CC: Jay Vosburgh <fubar@us.ibm.com>
CC: Andy Gospodarek <andy@greyhouse.net>
Signed-off-by: NVeaceslav Falico <vfalico@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

It has no users, so it's safe to remove it completely.

CC: Jay Vosburgh <fubar@us.ibm.com>
CC: Andy Gospodarek <andy@greyhouse.net>
Signed-off-by: NVeaceslav Falico <vfalico@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Convert all instances of

for (agg = __get_first_agg(); agg; agg = __get_next_port)

to the standard bond_for_each_slave().

CC: Jay Vosburgh <fubar@us.ibm.com>
CC: Andy Gospodarek <andy@greyhouse.net>
Signed-off-by: NVeaceslav Falico <vfalico@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Convert all instances of

for (agg = __get_first_agg(); agg; agg = __get_next_port)

to the standard bond_for_each_slave(). Also, remove the useless checks
before calling bond_3ad_set_carrier() - if we have something NULL - it
would fire long ago, in __get_first/next_port(), per example.

CC: Jay Vosburgh <fubar@us.ibm.com>
CC: Andy Gospodarek <andy@greyhouse.net>
Signed-off-by: NVeaceslav Falico <vfalico@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Currently we're relying on suboptimal construct

for (; aggregator; aggregator = __get_next_agg(aggregator)) {

where aggregator is an argument of __get_active_agg() which is _always_ the
first slave's aggregator - judging by all the callers, comments in the
ad_agg_selection_logic() and by logic.

Convert it to use the standard bond_for_each_slave().

CC: Jay Vosburgh <fubar@us.ibm.com>
CC: Andy Gospodarek <andy@greyhouse.net>
Signed-off-by: NVeaceslav Falico <vfalico@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Currently, ad_port_selection_logic() uses

for (aggregator = __get_first_agg(port); aggregator;
     aggregator = __get_next_agg(aggregator)) {

construct, however it's suboptimal, difficult to read and understand.

Change it to a standard bond_for_each_slave(), so that we won't need
__get_first/next_agg() and have it more readable.

CC: Jay Vosburgh <fubar@us.ibm.com>
CC: Andy Gospodarek <andy@greyhouse.net>
Signed-off-by: NVeaceslav Falico <vfalico@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Currently we have only one user of it, so it's kind of useless and just
obfusicates things.

Remove it and move the logic to the only user -
bond_3ad_state_machine_handler().

CC: Jay Vosburgh <fubar@us.ibm.com>
CC: Andy Gospodarek <andy@greyhouse.net>
Signed-off-by: NVeaceslav Falico <vfalico@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Currently this function is only used in constructs like

for (port = __get_first_port(bond); port; port = __get_next_port(port))

which is basicly the same as

bond_for_each_slave(bond, slave, iter) {
	port = &(SLAVE_AD_INFO(slave).port);

but a more time consuming.

Remove the function and convert the users to bond_for_each_slave().

CC: Jay Vosburgh <fubar@us.ibm.com>
CC: Andy Gospodarek <andy@greyhouse.net>
Signed-off-by: NVeaceslav Falico <vfalico@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

After commit 1f718f0f ("bonding: populate
neighbour's private on enslave"), we've moved the unlinking of the slave
to the earliest position possible - so that nobody will see an
half-uninited slave.

However, bond_3ad_unbind_slave() relied that, even while removing the last
slave, it is still accessible - via __get_first_agg() (and, eventually,
bond_first_slave()).

Fix that by verifying if the aggregator return is an actual aggregator, but
not NULL.

CC: Jay Vosburgh <fubar@us.ibm.com>
CC: Andy Gospodarek <andy@greyhouse.net>
Signed-off-by: NVeaceslav Falico <vfalico@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

After commit 1f718f0f ("bonding: populate
neighbour's private on enslave"), we've moved the actual 'linking' in the
end of the function - so that, once linked, the slave is ready to be used,
and is not still in the process of enslaving.

However, 802.3ad verified if it's the first slave by looking at the

if (bond_first_slave(bond) == new_slave)

which, because we've moved the linking to the end, became broken - on the
first slave bond_first_slave(bond) returns NULL.

Fix this by verifying if the prev_slave, that equals bond_last_slave(), is
actually populated - if it is - then it's not the first slave, and vice
versa.

CC: Jay Vosburgh <fubar@us.ibm.com>
CC: Andy Gospodarek <andy@greyhouse.net>
Signed-off-by: NVeaceslav Falico <vfalico@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Use common code for getting the pcie link speed/width for debug printing.
Signed-off-by: NYuval Mintz <yuvalmin@broadcom.com>
Signed-off-by: NAriel Elior <ariele@broadcom.com>
Signed-off-by: NEilon Greenstein <eilong@broadcom.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Add new LED mode for the BCM848xx to support new board type.
Signed-off-by: NYaniv Rosner <yanivr@broadcom.com>
Signed-off-by: NYuval Mintz <yuvalmin@broadcom.com>
Signed-off-by: NEilon Greenstein <eilong@broadcom.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Change bnx2x_bsc_read function prototype (more of a cosmetic change).
Signed-off-by: NYaniv Rosner <yanivr@broadcom.com>
Signed-off-by: NYuval Mintz <yuvalmin@broadcom.com>
Signed-off-by: NEilon Greenstein <eilong@broadcom.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Current bnx2x implementation controls the number of VFs only by
standard sysfs support, and will reject setting the number of VFs
when the PF is not loaded.
As a result, there is no need to schedule a delayed work to enable
SR-IOV when PF is loaded, as the number of VFs at that point
must be 0.
Signed-off-by: NAriel Elior <ariele@broadcom.com>
Signed-off-by: NYuval Mintz <yuvalmin@broadcom.com>
Signed-off-by: NEilon Greenstein <eilong@broadcom.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When running ethtool on VF interfaces, returning values should indicate
that the interface does not support self-test or register dump.
Signed-off-by: NYuval Mintz <yuvalmin@broadcom.com>
Signed-off-by: NAriel Elior <ariele@broadcom.com>
Signed-off-by: NEilon Greenstein <eilong@broadcom.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>