提交 · 6ecb3f0b18b320320460a42e40d6fb603f6ded96 · openeuler / Kernel

21 2月, 2022 2 次提交

USB: serial: option: add support for DW5829e · 6ecb3f0b

由 Slark Xiao 提交于 2月 14, 2022

Dell DW5829e same as DW5821e except CAT level.
DW5821e supports CAT16 but DW5829e supports CAT9.
There are 2 types product of DW5829e: normal and eSIM.
So we will add 2 PID for DW5829e.
And for each PID, it support MBIM or RMNET.
Let's see test evidence as below:

DW5829e MBIM mode:
T:  Bus=04 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#=  4 Spd=5000 MxCh= 0
D:  Ver= 3.10 Cls=ef(misc ) Sub=02 Prot=01 MxPS= 9 #Cfgs=  2
P:  Vendor=413c ProdID=81e6 Rev=03.18
S:  Manufacturer=Dell Inc.
S:  Product=DW5829e Snapdragon X20 LTE
S:  SerialNumber=0123456789ABCDEF
C:  #Ifs= 7 Cfg#= 2 Atr=a0 MxPwr=896mA
I:  If#=0x0 Alt= 0 #EPs= 1 Cls=02(commc) Sub=0e Prot=00 Driver=cdc_mbim
I:  If#=0x1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim
I:  If#=0x2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
I:  If#=0x3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
I:  If#=0x4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
I:  If#=0x5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
I:  If#=0x6 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)

DW5829e RMNET mode:
T:  Bus=04 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#=  5 Spd=5000 MxCh= 0
D:  Ver= 3.10 Cls=ef(misc ) Sub=02 Prot=01 MxPS= 9 #Cfgs=  1
P:  Vendor=413c ProdID=81e6 Rev=03.18
S:  Manufacturer=Dell Inc.
S:  Product=DW5829e Snapdragon X20 LTE
S:  SerialNumber=0123456789ABCDEF
C:  #Ifs= 6 Cfg#= 1 Atr=a0 MxPwr=896mA
I:  If#=0x0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan
I:  If#=0x1 Alt= 0 #EPs= 1 Cls=03(HID  ) Sub=00 Prot=00 Driver=usbhid
I:  If#=0x2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
I:  If#=0x3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
I:  If#=0x4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
I:  If#=0x5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option

DW5829e-eSIM MBIM mode:
T:  Bus=04 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#=  6 Spd=5000 MxCh= 0
D:  Ver= 3.10 Cls=ef(misc ) Sub=02 Prot=01 MxPS= 9 #Cfgs=  2
P:  Vendor=413c ProdID=81e4 Rev=03.18
S:  Manufacturer=Dell Inc.
S:  Product=DW5829e-eSIM Snapdragon X20 LTE
S:  SerialNumber=0123456789ABCDEF
C:  #Ifs= 7 Cfg#= 2 Atr=a0 MxPwr=896mA
I:  If#=0x0 Alt= 0 #EPs= 1 Cls=02(commc) Sub=0e Prot=00 Driver=cdc_mbim
I:  If#=0x1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim
I:  If#=0x2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
I:  If#=0x3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
I:  If#=0x4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
I:  If#=0x5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
I:  If#=0x6 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)

DW5829e-eSIM RMNET mode:
T:  Bus=04 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#=  7 Spd=5000 MxCh= 0
D:  Ver= 3.10 Cls=ef(misc ) Sub=02 Prot=01 MxPS= 9 #Cfgs=  1
P:  Vendor=413c ProdID=81e4 Rev=03.18
S:  Manufacturer=Dell Inc.
S:  Product=DW5829e-eSIM Snapdragon X20 LTE
S:  SerialNumber=0123456789ABCDEF
C:  #Ifs= 6 Cfg#= 1 Atr=a0 MxPwr=896mA
I:  If#=0x0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan
I:  If#=0x1 Alt= 0 #EPs= 1 Cls=03(HID  ) Sub=00 Prot=00 Driver=usbhid
I:  If#=0x2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
I:  If#=0x3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
I:  If#=0x4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
I:  If#=0x5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option

BTW, the interface 0x6 of MBIM mode is GNSS port, which not same as NMEA
port. So it's banned from serial option driver.
The remaining interfaces 0x2-0x5 are: MODEM, MODEM, NMEA, DIAG.
Signed-off-by: NSlark Xiao <slark_xiao@163.com>
Link: https://lore.kernel.org/r/20220214021401.6264-1-slark_xiao@163.com
[ johan: drop unnecessary reservation of interface 1 ]
Cc: stable@vger.kernel.org
Signed-off-by: NJohan Hovold <johan@kernel.org>

6ecb3f0b

Revert "USB: serial: ch341: add new Product ID for CH341A" · 198a7ebd

由 Dmytro Bagrii 提交于 2月 10, 2022

This reverts commit 46ee4abb.

CH341 has Product ID 0x5512 in EPP/MEM mode which is used for
I2C/SPI/GPIO interfaces. In asynchronous serial interface mode
CH341 has PID 0x5523 which is already in the table.

Mode is selected by corresponding jumper setting.
Signed-off-by: NDmytro Bagrii <dimich.dmb@gmail.com>
Link: https://lore.kernel.org/r/20220210164137.4376-1-dimich.dmb@gmail.com
Link: https://lore.kernel.org/r/YJ0OCS/sh+1ifD/q@hovoldconsulting.com
Cc: stable@vger.kernel.org
Signed-off-by: NJohan Hovold <johan@kernel.org>

198a7ebd

01 2月, 2022 3 次提交

USB: serial: cp210x: add CPI Bulk Coin Recycler id · 6ca0c628

由 Johan Hovold 提交于 2月 01, 2022

Add the device id for the Crane Payment Innovation / Money Controls Bulk
Coin Recycler:

	https://www.cranepi.com/en/system/files/Support/OM_BCR_EN_V1-04_0.pdfReported-by: NScott Russell <Scott.Russell2@ncr.com>
Cc: stable@vger.kernel.org
Reviewed-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NJohan Hovold <johan@kernel.org>

6ca0c628

USB: serial: cp210x: add NCR Retail IO box id · b50f8f09

由 Johan Hovold 提交于 2月 01, 2022

Add the device id for NCR's Retail IO box (CP2105) used in NCR FastLane
SelfServ Checkout - R6C:

	https://www.ncr.com/product-catalog/ncr-fastlane-selfserv-checkout-r6cReported-by: NScott Russell <Scott.Russell2@ncr.com>
Cc: stable@vger.kernel.org
Reviewed-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NJohan Hovold <johan@kernel.org>

b50f8f09

USB: serial: ftdi_sio: add support for Brainboxes US-159/235/320 · fbb9b194

由 Cameron Williams 提交于 2月 01, 2022

This patch adds support for the Brainboxes US-159, US-235 and US-320
USB-to-Serial devices.
Signed-off-by: NCameron Williams <cang1@live.co.uk>
Cc: stable@vger.kernel.org
Signed-off-by: NJohan Hovold <johan@kernel.org>

fbb9b194

31 1月, 2022 2 次提交

USB: serial: option: add ZTE MF286D modem · d48384c7

由 Pawel Dembicki 提交于 1月 11, 2022

Modem from ZTE MF286D is an Qualcomm MDM9250 based 3G/4G modem.

T:  Bus=02 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#=  3 Spd=5000 MxCh= 0
D:  Ver= 3.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 9 #Cfgs=  1
P:  Vendor=19d2 ProdID=1485 Rev=52.87
S:  Manufacturer=ZTE,Incorporated
S:  Product=ZTE Technologies MSM
S:  SerialNumber=MF286DZTED000000
C:* #Ifs= 7 Cfg#= 1 Atr=80 MxPwr=896mA
A:  FirstIf#= 0 IfCount= 2 Cls=02(comm.) Sub=06 Prot=00
I:* If#= 0 Alt= 0 #EPs= 1 Cls=02(comm.) Sub=02 Prot=ff Driver=rndis_host
E:  Ad=82(I) Atr=03(Int.) MxPS=   8 Ivl=32ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=rndis_host
E:  Ad=81(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms
E:  Ad=01(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms
I:* If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
E:  Ad=83(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms
E:  Ad=02(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms
I:* If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
E:  Ad=85(I) Atr=03(Int.) MxPS=  10 Ivl=32ms
E:  Ad=84(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms
E:  Ad=03(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms
I:* If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
E:  Ad=87(I) Atr=03(Int.) MxPS=  10 Ivl=32ms
E:  Ad=86(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms
E:  Ad=04(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms
I:* If#= 5 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan
E:  Ad=88(I) Atr=03(Int.) MxPS=   8 Ivl=32ms
E:  Ad=8e(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms
E:  Ad=0f(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms
I:* If#= 6 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=usbfs
E:  Ad=05(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms
E:  Ad=89(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms
Signed-off-by: NPawel Dembicki <paweldembicki@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: NJohan Hovold <johan@kernel.org>

d48384c7

USB: serial: ch341: add support for GW Instek USB2.0-Serial devices · fa77ce20

由 Stephan Brunner 提交于 1月 08, 2022

Programmable lab power supplies made by GW Instek, such as the
GPP-2323, have a USB port exposing a serial port to control the device.

Stringing the supplied Windows driver, references to the ch341 chip are
found. Binding the existing ch341 driver to the VID/PID of the GPP-2323
("GW Instek USB2.0-Serial" as per the USB product name) works out of the
box, communication and control is now possible.

This patch should work with any GPP series power supply due to
similarities in the product line.
Signed-off-by: NStephan Brunner <s.brunner@stephan-brunner.net>
Link: https://lore.kernel.org/r/4a47b864-0816-6f6a-efee-aa20e74bcdc6@stephan-brunner.net
Cc: stable@vger.kernel.org
Signed-off-by: NJohan Hovold <johan@kernel.org>

fa77ce20

14 12月, 2021 2 次提交

USB: serial: option: add Telit FN990 compositions · 2b503c85

由 Daniele Palmas 提交于 12月 10, 2021

Add the following Telit FN990 compositions:

0x1070: tty, adb, rmnet, tty, tty, tty, tty
0x1071: tty, adb, mbim, tty, tty, tty, tty
0x1072: rndis, tty, adb, tty, tty, tty, tty
0x1073: tty, adb, ecm, tty, tty, tty, tty
Signed-off-by: NDaniele Palmas <dnlplm@gmail.com>
Link: https://lore.kernel.org/r/20211210100714.22587-1-dnlplm@gmail.com
Cc: stable@vger.kernel.org
Signed-off-by: NJohan Hovold <johan@kernel.org>

2b503c85

USB: serial: cp210x: fix CP2105 GPIO registration · 83b67041

由 Johan Hovold 提交于 11月 26, 2021

When generalising GPIO support and adding support for CP2102N, the GPIO
registration for some CP2105 devices accidentally broke. Specifically,
when all the pins of a port are in "modem" mode, and thus unavailable
for GPIO use, the GPIO chip would now be registered without having
initialised the number of GPIO lines. This would in turn be rejected by
gpiolib and some errors messages would be printed (but importantly probe
would still succeed).

Fix this by initialising the number of GPIO lines before registering the
GPIO chip.

Note that as for the other device types, and as when all CP2105 pins are
muxed for LED function, the GPIO chip is registered also when no pins
are available for GPIO use.
Reported-by: NMaarten Brock <m.brock@vanmierlo.com>
Link: https://lore.kernel.org/r/5eb560c81d2ea1a2b4602a92d9f48a89@vanmierlo.com
Fixes: c8acfe0a ("USB: serial: cp210x: implement GPIO support for CP2102N")
Cc: stable@vger.kernel.org      # 4.19
Cc: Karoly Pados <pados@pados.hu>
Link: https://lore.kernel.org/r/20211126094348.31698-1-johan@kernel.orgReviewed-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Tested-by: NMaarten Brock <m.brock@vanmierlo.com>
Signed-off-by: NJohan Hovold <johan@kernel.org>

83b67041

25 11月, 2021 1 次提交

USB: serial: option: add Fibocom FM101-GL variants · 88459e3e

由 Mingjie Zhang 提交于 11月 23, 2021

Update the USB serial option driver support for the Fibocom
FM101-GL Cat.6
LTE modules as there are actually several different variants.
- VID:PID 2cb7:01a2, FM101-GL are laptop M.2 cards (with
  MBIM interfaces for /Linux/Chrome OS)
- VID:PID 2cb7:01a4, FM101-GL for laptop debug M.2 cards(with adb
  interface for /Linux/Chrome OS)

0x01a2: mbim, tty, tty, diag, gnss
0x01a4: mbim, diag, tty, adb, gnss, gnss

Here are the outputs of lsusb -v and usb-devices:

T:  Bus=02 Lev=01 Prnt=01 Port=03 Cnt=01 Dev#= 86 Spd=5000 MxCh= 0
D:  Ver= 3.20 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 9 #Cfgs=  1
P:  Vendor=2cb7 ProdID=01a2 Rev= 5.04
S:  Manufacturer=Fibocom Wireless Inc.
S:  Product=Fibocom FM101-GL Module
S:  SerialNumber=673326ce
C:* #Ifs= 6 Cfg#= 1 Atr=a0 MxPwr=896mA
A:  FirstIf#= 0 IfCount= 2 Cls=02(comm.) Sub=0e Prot=00
I:* If#= 0 Alt= 0 #EPs= 1 Cls=02(comm.) Sub=0e Prot=00 Driver=cdc_mbim
I:  If#= 1 Alt= 0 #EPs= 0 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim
I:* If#= 1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim
I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=(none)
I:* If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=(none)
I:* If#= 4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=(none)
I:* If#= 5 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=40 Driver=(none)

Bus 002 Device 084: ID 2cb7:01a2 Fibocom Wireless Inc. Fibocom FM101-GL Module
Device Descriptor:
  bLength                18
  bDescriptorType         1
  bcdUSB               3.20
  bDeviceClass            0
  bDeviceSubClass         0
  bDeviceProtocol         0
  bMaxPacketSize0         9
  idVendor           0x2cb7
  idProduct          0x01a2
  bcdDevice            5.04
  iManufacturer           1 Fibocom Wireless Inc.
  iProduct                2 Fibocom FM101-GL Module
  iSerial                 3 673326ce
  bNumConfigurations      1
  Configuration Descriptor:
    bLength                 9
    bDescriptorType         2
    wTotalLength       0x015d
    bNumInterfaces          6
    bConfigurationValue     1
    iConfiguration          4 MBIM_DUN_DUN_DIAG_NMEA
    bmAttributes         0xa0
      (Bus Powered)
      Remote Wakeup
    MaxPower              896mA
    Interface Association:
      bLength                 8
      bDescriptorType        11
      bFirstInterface         0
      bInterfaceCount         2
      bFunctionClass          2 Communications
      bFunctionSubClass      14
      bFunctionProtocol       0
      iFunction               0
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        0
      bAlternateSetting       0
      bNumEndpoints           1
      bInterfaceClass         2 Communications
      bInterfaceSubClass     14
      bInterfaceProtocol      0
      iInterface              5 Fibocom FM101-GL LTE Modem
      CDC Header:
        bcdCDC               1.10
      CDC Union:
        bMasterInterface        0
        bSlaveInterface         1
      CDC MBIM:
        bcdMBIMVersion       1.00
        wMaxControlMessage   4096
        bNumberFilters       32
        bMaxFilterSize       128
        wMaxSegmentSize      2048
        bmNetworkCapabilities 0x20
          8-byte ntb input size
      CDC MBIM Extended:
        bcdMBIMExtendedVersion           1.00
        bMaxOutstandingCommandMessages     64
        wMTU                             1500
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x81  EP 1 IN
        bmAttributes            3
          Transfer Type            Interrupt
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0040  1x 64 bytes
        bInterval               9
        bMaxBurst               0
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        1
      bAlternateSetting       0
      bNumEndpoints           0
      bInterfaceClass        10 CDC Data
      bInterfaceSubClass      0
      bInterfaceProtocol      2
      iInterface              0
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        1
      bAlternateSetting       1
      bNumEndpoints           2
      bInterfaceClass        10 CDC Data
      bInterfaceSubClass      0
      bInterfaceProtocol      2
      iInterface              6 MBIM Data
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x8e  EP 14 IN
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0400  1x 1024 bytes
        bInterval               0
        bMaxBurst               6
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x0f  EP 15 OUT
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0400  1x 1024 bytes
        bInterval               0
        bMaxBurst               2
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        2
      bAlternateSetting       0
      bNumEndpoints           3
      bInterfaceClass       255 Vendor Specific Class
      bInterfaceSubClass    255 Vendor Specific Subclass
      bInterfaceProtocol     64
      iInterface              0
      ** UNRECOGNIZED:  05 24 00 10 01
      ** UNRECOGNIZED:  05 24 01 00 00
      ** UNRECOGNIZED:  04 24 02 02
      ** UNRECOGNIZED:  05 24 06 00 00
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x83  EP 3 IN
        bmAttributes            3
          Transfer Type            Interrupt
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x000a  1x 10 bytes
        bInterval               9
        bMaxBurst               0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x82  EP 2 IN
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0400  1x 1024 bytes
        bInterval               0
        bMaxBurst               0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x01  EP 1 OUT
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0400  1x 1024 bytes
        bInterval               0
        bMaxBurst               0
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        3
      bAlternateSetting       0
      bNumEndpoints           3
      bInterfaceClass       255 Vendor Specific Class
      bInterfaceSubClass    255 Vendor Specific Subclass
      bInterfaceProtocol     64
      iInterface              0
      ** UNRECOGNIZED:  05 24 00 10 01
      ** UNRECOGNIZED:  05 24 01 00 00
      ** UNRECOGNIZED:  04 24 02 02
      ** UNRECOGNIZED:  05 24 06 00 00
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x85  EP 5 IN
        bmAttributes            3
          Transfer Type            Interrupt
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x000a  1x 10 bytes
        bInterval               9
        bMaxBurst               0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x84  EP 4 IN
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0400  1x 1024 bytes
        bInterval               0
        bMaxBurst               0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x02  EP 2 OUT
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0400  1x 1024 bytes
        bInterval               0
        bMaxBurst               0
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        4
      bAlternateSetting       0
      bNumEndpoints           2
      bInterfaceClass       255 Vendor Specific Class
      bInterfaceSubClass    255 Vendor Specific Subclass
      bInterfaceProtocol     48
      iInterface              0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x03  EP 3 OUT
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0400  1x 1024 bytes
        bInterval               0
        bMaxBurst               0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x86  EP 6 IN
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0400  1x 1024 bytes
        bInterval               0
        bMaxBurst               0
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        5
      bAlternateSetting       0
      bNumEndpoints           3
      bInterfaceClass       255 Vendor Specific Class
      bInterfaceSubClass      0
      bInterfaceProtocol     64
      iInterface              0
      ** UNRECOGNIZED:  05 24 00 10 01
      ** UNRECOGNIZED:  05 24 01 00 00
      ** UNRECOGNIZED:  04 24 02 02
      ** UNRECOGNIZED:  05 24 06 00 00
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x88  EP 8 IN
        bmAttributes            3
          Transfer Type            Interrupt
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x000a  1x 10 bytes
        bInterval               9
        bMaxBurst               0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x87  EP 7 IN
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0400  1x 1024 bytes
        bInterval               0
        bMaxBurst               0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x04  EP 4 OUT
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0400  1x 1024 bytes
        bInterval               0
        bMaxBurst               0

T:  Bus=02 Lev=01 Prnt=01 Port=03 Cnt=01 Dev#= 85 Spd=5000 MxCh= 0
D:  Ver= 3.20 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 9 #Cfgs=  1
P:  Vendor=2cb7 ProdID=01a4 Rev= 5.04
S:  Manufacturer=Fibocom Wireless Inc.
S:  Product=Fibocom FM101-GL Module
S:  SerialNumber=673326ce
C:* #Ifs= 7 Cfg#= 1 Atr=a0 MxPwr=896mA
A:  FirstIf#= 0 IfCount= 2 Cls=02(comm.) Sub=0e Prot=00
I:* If#= 0 Alt= 0 #EPs= 1 Cls=02(comm.) Sub=0e Prot=00 Driver=cdc_mbim
I:  If#= 1 Alt= 0 #EPs= 0 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim
I:* If#= 1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim
I:* If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=(none)
I:* If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=(none)
I:* If#= 4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=(none)
I:* If#= 5 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=40 Driver=(none)
I:* If#= 6 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=40 Driver=(none)

Bus 002 Device 085: ID 2cb7:01a4 Fibocom Wireless Inc. Fibocom FM101-GL Module
Device Descriptor:
  bLength                18
  bDescriptorType         1
  bcdUSB               3.20
  bDeviceClass            0
  bDeviceSubClass         0
  bDeviceProtocol         0
  bMaxPacketSize0         9
  idVendor           0x2cb7
  idProduct          0x01a4
  bcdDevice            5.04
  iManufacturer           1 Fibocom Wireless Inc.
  iProduct                2 Fibocom FM101-GL Module
  iSerial                 3 673326ce
  bNumConfigurations      1
  Configuration Descriptor:
    bLength                 9
    bDescriptorType         2
    wTotalLength       0x0180
    bNumInterfaces          7
    bConfigurationValue     1
    iConfiguration          4 MBIM_DIAG_DUN_ADB_GNSS_GNSS
    bmAttributes         0xa0
      (Bus Powered)
      Remote Wakeup
    MaxPower              896mA
    Interface Association:
      bLength                 8
      bDescriptorType        11
      bFirstInterface         0
      bInterfaceCount         2
      bFunctionClass          2 Communications
      bFunctionSubClass      14
      bFunctionProtocol       0
      iFunction               0
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        0
      bAlternateSetting       0
      bNumEndpoints           1
      bInterfaceClass         2 Communications
      bInterfaceSubClass     14
      bInterfaceProtocol      0
      iInterface              5 Fibocom FM101-GL LTE Modem
      CDC Header:
        bcdCDC               1.10
      CDC Union:
        bMasterInterface        0
        bSlaveInterface         1
      CDC MBIM:
        bcdMBIMVersion       1.00
        wMaxControlMessage   4096
        bNumberFilters       32
        bMaxFilterSize       128
        wMaxSegmentSize      2048
        bmNetworkCapabilities 0x20
          8-byte ntb input size
      CDC MBIM Extended:
        bcdMBIMExtendedVersion           1.00
        bMaxOutstandingCommandMessages     64
        wMTU                             1500
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x81  EP 1 IN
        bmAttributes            3
          Transfer Type            Interrupt
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0040  1x 64 bytes
        bInterval               9
        bMaxBurst               0
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        1
      bAlternateSetting       0
      bNumEndpoints           0
      bInterfaceClass        10 CDC Data
      bInterfaceSubClass      0
      bInterfaceProtocol      2
      iInterface              0
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        1
      bAlternateSetting       1
      bNumEndpoints           2
      bInterfaceClass        10 CDC Data
      bInterfaceSubClass      0
      bInterfaceProtocol      2
      iInterface              6 MBIM Data
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x8e  EP 14 IN
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0400  1x 1024 bytes
        bInterval               0
        bMaxBurst               6
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x0f  EP 15 OUT
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0400  1x 1024 bytes
        bInterval               0
        bMaxBurst               2
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        2
      bAlternateSetting       0
      bNumEndpoints           2
      bInterfaceClass       255 Vendor Specific Class
      bInterfaceSubClass    255 Vendor Specific Subclass
      bInterfaceProtocol     48
      iInterface              0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x01  EP 1 OUT
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0400  1x 1024 bytes
        bInterval               0
        bMaxBurst               0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x82  EP 2 IN
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0400  1x 1024 bytes
        bInterval               0
        bMaxBurst               0
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        3
      bAlternateSetting       0
      bNumEndpoints           3
      bInterfaceClass       255 Vendor Specific Class
      bInterfaceSubClass    255 Vendor Specific Subclass
      bInterfaceProtocol     64
      iInterface              0
      ** UNRECOGNIZED:  05 24 00 10 01
      ** UNRECOGNIZED:  05 24 01 00 00
      ** UNRECOGNIZED:  04 24 02 02
      ** UNRECOGNIZED:  05 24 06 00 00
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x84  EP 4 IN
        bmAttributes            3
          Transfer Type            Interrupt
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x000a  1x 10 bytes
        bInterval               9
        bMaxBurst               0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x83  EP 3 IN
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0400  1x 1024 bytes
        bInterval               0
        bMaxBurst               0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x02  EP 2 OUT
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0400  1x 1024 bytes
        bInterval               0
        bMaxBurst               0
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        4
      bAlternateSetting       0
      bNumEndpoints           2
      bInterfaceClass       255 Vendor Specific Class
      bInterfaceSubClass     66
      bInterfaceProtocol      1
      iInterface              8 ADB Interface
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x03  EP 3 OUT
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0400  1x 1024 bytes
        bInterval               0
        bMaxBurst               0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x85  EP 5 IN
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0400  1x 1024 bytes
        bInterval               0
        bMaxBurst               0
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        5
      bAlternateSetting       0
      bNumEndpoints           3
      bInterfaceClass       255 Vendor Specific Class
      bInterfaceSubClass      0
      bInterfaceProtocol     64
      iInterface              0
      ** UNRECOGNIZED:  05 24 00 10 01
      ** UNRECOGNIZED:  05 24 01 00 00
      ** UNRECOGNIZED:  04 24 02 02
      ** UNRECOGNIZED:  05 24 06 00 00
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x87  EP 7 IN
        bmAttributes            3
          Transfer Type            Interrupt
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x000a  1x 10 bytes
        bInterval               9
        bMaxBurst               0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x86  EP 6 IN
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0400  1x 1024 bytes
        bInterval               0
        bMaxBurst               0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x04  EP 4 OUT
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0400  1x 1024 bytes
        bInterval               0
        bMaxBurst               0
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        6
      bAlternateSetting       0
      bNumEndpoints           3
      bInterfaceClass       255 Vendor Specific Class
      bInterfaceSubClass      0
      bInterfaceProtocol     64
      iInterface              0
      ** UNRECOGNIZED:  05 24 00 10 01
      ** UNRECOGNIZED:  05 24 01 00 00
      ** UNRECOGNIZED:  04 24 02 02
      ** UNRECOGNIZED:  05 24 06 00 00
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x89  EP 9 IN
        bmAttributes            3
          Transfer Type            Interrupt
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x000a  1x 10 bytes
        bInterval               9
        bMaxBurst               0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x88  EP 8 IN
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0400  1x 1024 bytes
        bInterval               0
        bMaxBurst               0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x05  EP 5 OUT
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0400  1x 1024 bytes
        bInterval               0
        bMaxBurst               0
Signed-off-by: NMingjie Zhang <superzmj@fibocom.com>
Link: https://lore.kernel.org/r/20211123133757.37475-1-superzmj@fibocom.com
Cc: stable@vger.kernel.org
Signed-off-by: NJohan Hovold <johan@kernel.org>

88459e3e

23 11月, 2021 1 次提交

USB: serial: pl2303: fix GC type detection · aa5721a9

由 Johan Hovold 提交于 11月 23, 2021

At least some PL2303GC have a bcdDevice of 0x105 instead of 0x100 as the
datasheet claims. Add it to the list of known release numbers for the
HXN (G) type.

Note the chip type could only be determined indirectly based on its
package being of QFP type, which appears to only be available for
PL2303GC.

Fixes: 894758d0 ("USB: serial: pl2303: tighten type HXN (G) detection")
Cc: stable@vger.kernel.org	# 5.13
Reported-by: NAnton Lundin <glance@acc.umu.se>
Link: https://lore.kernel.org/r/20211123071613.GZ108031@montezuma.acc.umu.se
Link: https://lore.kernel.org/r/20211123091017.30708-1-johan@kernel.orgSigned-off-by: NJohan Hovold <johan@kernel.org>

aa5721a9

22 11月, 2021 1 次提交

USB: serial: option: add Telit LE910S1 0x9200 composition · e353f3e8

由 Daniele Palmas 提交于 11月 19, 2021

Add the following Telit LE910S1 composition:

0x9200: tty
Signed-off-by: NDaniele Palmas <dnlplm@gmail.com>
Link: https://lore.kernel.org/r/20211119140319.10448-1-dnlplm@gmail.com
Cc: stable@vger.kernel.org
Signed-off-by: NJohan Hovold <johan@kernel.org>

e353f3e8

27 10月, 2021 3 次提交

USB: serial: keyspan: fix memleak on probe errors · 910c9963

由 Wang Hai 提交于 10月 15, 2021

I got memory leak as follows when doing fault injection test:

unreferenced object 0xffff888258228440 (size 64):
  comm "kworker/7:2", pid 2005, jiffies 4294989509 (age 824.540s)
  hex dump (first 32 bytes):
    00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
    00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
  backtrace:
    [<ffffffff8167939c>] slab_post_alloc_hook+0x9c/0x490
    [<ffffffff8167f627>] kmem_cache_alloc_trace+0x1f7/0x470
    [<ffffffffa02ac0e4>] keyspan_port_probe+0xa4/0x5d0 [keyspan]
    [<ffffffffa0294c07>] usb_serial_device_probe+0x97/0x1d0 [usbserial]
    [<ffffffff82b50ca7>] really_probe+0x167/0x460
    [<ffffffff82b51099>] __driver_probe_device+0xf9/0x180
    [<ffffffff82b51173>] driver_probe_device+0x53/0x130
    [<ffffffff82b516f5>] __device_attach_driver+0x105/0x130
    [<ffffffff82b4cfe9>] bus_for_each_drv+0x129/0x190
    [<ffffffff82b50a69>] __device_attach+0x1c9/0x270
    [<ffffffff82b518d0>] device_initial_probe+0x20/0x30
    [<ffffffff82b4f062>] bus_probe_device+0x142/0x160
    [<ffffffff82b4a4e9>] device_add+0x829/0x1300
    [<ffffffffa0295fda>] usb_serial_probe.cold+0xc9b/0x14ac [usbserial]
    [<ffffffffa02266aa>] usb_probe_interface+0x1aa/0x3c0 [usbcore]
    [<ffffffff82b50ca7>] really_probe+0x167/0x460

If keyspan_port_probe() fails to allocate memory for an out_buffer[i] or
in_buffer[i], the previously allocated memory for out_buffer or
in_buffer needs to be freed on the error handling path, otherwise a
memory leak will result.

Fixes: bad41a5b ("USB: keyspan: fix port DMA-buffer allocations")
Reported-by: NHulk Robot <hulkci@huawei.com>
Signed-off-by: NWang Hai <wanghai38@huawei.com>
Link: https://lore.kernel.org/r/20211015085543.1203011-1-wanghai38@huawei.com
Cc: stable@vger.kernel.org      # 3.12
Signed-off-by: NJohan Hovold <johan@kernel.org>

910c9963

USB: serial: cp210x: use usb_control_msg_recv() and usb_control_msg_send() · f5cfbecb

由 Himadri Pandya 提交于 10月 01, 2021

The new wrapper functions for usb_control_msg() can accept data from
stack and treat short reads as errors. Hence use the wrappers functions.
Please note that because of this change, cp210x_read_reg_block() will no
longer log the length of short reads.
Signed-off-by: NHimadri Pandya <himadrispandya@gmail.com>
Link: https://lore.kernel.org/r/20211001065720.21330-3-himadrispandya@gmail.com
[ johan: style changes ]
Signed-off-by: NJohan Hovold <johan@kernel.org>

f5cfbecb

USB: serial: ch314: use usb_control_msg_recv() · 74f26645

由 Himadri Pandya 提交于 10月 01, 2021

usb_control_msg_recv() is a new wrapper function for usb_control_msg()
that has error checks for short reads. This function also accepts data
buffer on stack. Hence use this function to simplify error handling for
short reads. Short reads will now get reported as -EREMOTEIO with no
indication of how short the transfer was.
Signed-off-by: NHimadri Pandya <himadrispandya@gmail.com>
Link: https://lore.kernel.org/r/20211001065720.21330-2-himadrispandya@gmail.com
[ johan: fix quirk-detection breakage, style changes ]
Signed-off-by: NJohan Hovold <johan@kernel.org>

74f26645

07 10月, 2021 4 次提交

USB: serial: qcserial: add EM9191 QDL support · 11c52d25

由 Aleksander Morgado 提交于 10月 07, 2021

When the module boots into QDL download mode it exposes the 1199:90d2
ids, which can be mapped to the qcserial driver, and used to run
firmware upgrades (e.g. with the qmi-firmware-update program).

  T:  Bus=01 Lev=03 Prnt=08 Port=03 Cnt=01 Dev#= 10 Spd=480 MxCh= 0
  D:  Ver= 2.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
  P:  Vendor=1199 ProdID=90d2 Rev=00.00
  S:  Manufacturer=Sierra Wireless, Incorporated
  S:  Product=Sierra Wireless EM9191
  S:  SerialNumber=8W0382004102A109
  C:  #Ifs= 1 Cfg#= 1 Atr=a0 MxPwr=2mA
  I:  If#=0x0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=10 Driver=qcserial
Signed-off-by: NAleksander Morgado <aleksander@aleksander.es>
Cc: stable@vger.kernel.org
Signed-off-by: NJohan Hovold <johan@kernel.org>

11c52d25

USB: serial: option: add Quectel EC200S-CN module support · 2263eb73

由 Yu-Tung Chang 提交于 9月 30, 2021

Add usb product id of the Quectel EC200S-CN module.

usb-devices output for 0x6002:
T:  Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#=  3 Spd=480 MxCh= 0
D:  Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs=  1
P:  Vendor=2c7c ProdID=6002 Rev=03.18
S:  Manufacturer=Android
S:  Product=Android
S:  SerialNumber=0000
C:  #Ifs= 5 Cfg#= 1 Atr=e0 MxPwr=500mA
I:  If#=0x0 Alt= 0 #EPs= 1 Cls=02(commc) Sub=06 Prot=00 Driver=cdc_ether
I:  If#=0x1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=cdc_ether
I:  If#=0x2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none)
I:  If#=0x3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none)
I:  If#=0x4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none)
Signed-off-by: NYu-Tung Chang <mtwget@gmail.com>
Link: https://lore.kernel.org/r/20210930021112.330396-1-mtwget@gmail.com
Cc: stable@vger.kernel.org
Signed-off-by: NJohan Hovold <johan@kernel.org>

2263eb73

USB: serial: option: add prod. id for Quectel EG91 · c184accc

由 Tomaz Solc 提交于 10月 06, 2021

Adding support for Quectel EG91 LTE module.

The interface layout is same as for EG95.

usb-devices output:
T:  Bus=01 Lev=02 Prnt=02 Port=00 Cnt=01 Dev#=  3 Spd=480 MxCh= 0
D:  Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs=  1
P:  Vendor=2c7c ProdID=0191 Rev=03.18
S:  Manufacturer=Android
S:  Product=Android
C:  #Ifs= 5 Cfg#= 1 Atr=a0 MxPwr=500mA
I:  If#=0x0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
I:  If#=0x1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none)
I:  If#=0x2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none)
I:  If#=0x3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none)
I:  If#=0x4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan

Interfaces:

0: Diag
1: GNSS
2: AT-command interface/modem
3: Modem
4: QMI
Signed-off-by: NTomaz Solc <tomaz.solc@tablix.org>
Cc: stable@vger.kernel.org
Signed-off-by: NJohan Hovold <johan@kernel.org>

c184accc

USB: serial: option: add Telit LE910Cx composition 0x1204 · f5a8a07e

由 Daniele Palmas 提交于 10月 04, 2021

Add the following Telit LE910Cx composition:

0x1204: tty, adb, mbim, tty, tty, tty, tty
Signed-off-by: NDaniele Palmas <dnlplm@gmail.com>
Link: https://lore.kernel.org/r/20211004105655.8515-1-dnlplm@gmail.com
Cc: stable@vger.kernel.org
Signed-off-by: NJohan Hovold <johan@kernel.org>

f5a8a07e

24 9月, 2021 2 次提交

USB: serial: option: add device id for Foxconn T99W265 · 9e3eed53

由 Slark Xiao 提交于 9月 17, 2021

Adding support for Foxconn device T99W265 for enumeration with
PID 0xe0db.

usb-devices output for 0xe0db
T:  Bus=04 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 19 Spd=5000 MxCh= 0
D:  Ver= 3.20 Cls=ef(misc ) Sub=02 Prot=01 MxPS= 9 #Cfgs=  1
P:  Vendor=0489 ProdID=e0db Rev=05.04
S:  Manufacturer=Microsoft
S:  Product=Generic Mobile Broadband Adapter
S:  SerialNumber=6c50f452
C:  #Ifs= 5 Cfg#= 1 Atr=a0 MxPwr=896mA
I:  If#=0x0 Alt= 0 #EPs= 1 Cls=02(commc) Sub=0e Prot=00 Driver=cdc_mbim
I:  If#=0x1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim
I:  If#=0x2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option
I:  If#=0x3 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
I:  If#=0x4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option

if0/1: MBIM, if2:Diag, if3:GNSS, if4: Modem
Signed-off-by: NSlark Xiao <slark_xiao@163.com>
Link: https://lore.kernel.org/r/20210917110106.9852-1-slark_xiao@163.com
[ johan: use USB_DEVICE_INTERFACE_CLASS(), amend comment ]
Cc: stable@vger.kernel.org
Signed-off-by: NJohan Hovold <johan@kernel.org>

9e3eed53

USB: serial: cp210x: add ID for GW Instek GDM-834x Digital Multimeter · 3bd18ba7

由 Uwe Brandt 提交于 9月 21, 2021

Add the USB serial device ID for the GW Instek GDM-834x Digital Multimeter.
Signed-off-by: NUwe Brandt <uwe.brandt@gmail.com>
Link: https://lore.kernel.org/r/YUxFl3YUCPGJZd8Y@hovoldconsulting.com
Cc: stable@vger.kernel.org
Signed-off-by: NJohan Hovold <johan@kernel.org>

3bd18ba7

23 9月, 2021 2 次提交

J
USB: serial: cp210x: add part-number debug printk · 90ca6e7d
由 Johan Hovold 提交于 9月 22, 2021
```
Add a part-number debug printk to facilitate debugging.
Signed-off-by: NJohan Hovold <johan@kernel.org>
```
90ca6e7d

USB: serial: cp210x: fix dropped characters with CP2102 · c32dfec6

由 Johan Hovold 提交于 9月 22, 2021

Some CP2102 do not support event-insertion mode but return no error when
attempting to enable it.

This means that any event escape characters in the input stream will not
be escaped by the device and consequently regular data may be
interpreted as escape sequences and be removed from the stream by the
driver.

The reporter's device has batch number DCL00X etched into it and as
discovered by the SHA2017 Badge team, counterfeit devices with that
marking can be detected by sending malformed vendor requests. [1][2]

Tests confirm that the possibly counterfeit CP2102 returns a single byte
in response to a malformed two-byte part-number request, while an
original CP2102 returns two bytes. Assume that every CP2102 that behaves
this way also does not support event-insertion mode (e.g. cannot report
parity errors).

[1] https://mobile.twitter.com/sha2017badge/status/1167902087289532418
[2] https://hackaday.com/2017/08/14/hands-on-with-the-shacamp-2017-badge/#comment-3903376Reported-by: NMalte Di Donato <malte@neo-soft.org>
Tested-by: NMalte Di Donato <malte@neo-soft.org>
Fixes: a7207e98 ("USB: serial: cp210x: add support for line-status events")
Cc: stable@vger.kernel.org	# 5.9
Link: https://lore.kernel.org/r/20210922113100.20888-1-johan@kernel.orgSigned-off-by: NJohan Hovold <johan@kernel.org>

c32dfec6

22 9月, 2021 3 次提交

USB: serial: kl5kusb105: drop line-status helper · c8345c05

由 Johan Hovold 提交于 9月 21, 2021

Drop the line-status conversion helper and do the conversion in place
instead.
Reviewed-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NJohan Hovold <johan@kernel.org>

c8345c05

USB: serial: kl5kusb105: simplify line-status handling · 2e0b78da

由 Johan Hovold 提交于 9月 21, 2021

Now that the driver is using usb_control_msg_recv(), the line status
handling can be simplified further by reading directly into the status
variable and doing the endian conversion in place.
Reviewed-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NJohan Hovold <johan@kernel.org>

2e0b78da

USB: serial: kl5kusb105: clean up line-status handling · a692d0e6

由 Johan Hovold 提交于 9月 21, 2021

Clean up the line-status handling by dropping redundant initialisations
and returning early on errors.
Reviewed-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NJohan Hovold <johan@kernel.org>

a692d0e6

21 9月, 2021 4 次提交

USB: serial: kl5kusb105: use usb_control_msg_recv() and usb_control_msg_send() · 71b20b34

由 Himadri Pandya 提交于 8月 02, 2021

The wrappers usb_control_msg_send/recv eliminate the need of manually
allocating DMA buffers for USB messages. They also treat short reads as
an error. Hence use the wrappers and remove DMA allocations.

Note that short reads are now logged as -EREMOTEIO instead of the amount
of data read.
Signed-off-by: NHimadri Pandya <himadrispandya@gmail.com>
Link: https://lore.kernel.org/r/20210801203122.3515-7-himadrispandya@gmail.com
[ johan: amend commit message ]
Signed-off-by: NJohan Hovold <johan@kernel.org>

71b20b34

USB: serial: keyspan_pda: use usb_control_msg_recv() · c9129371

由 Himadri Pandya 提交于 8月 02, 2021

Use the wrapper function usb_control_msg_recv() that accepts stack
variables and remove dma buffers from callers of usb_control_msg().
Signed-off-by: NHimadri Pandya <himadrispandya@gmail.com>
Link: https://lore.kernel.org/r/20210801203122.3515-6-himadrispandya@gmail.com
[ johan: simplify write-room error handling further ]
Signed-off-by: NJohan Hovold <johan@kernel.org>

c9129371

USB: serial: ftdi_sio: use usb_control_msg_recv() · a7388592

由 Himadri Pandya 提交于 8月 02, 2021

usb_control_msg_recv() nicely wraps usb_control_msg() and removes the
compulsion of using DMA buffers for USB messages. It also includes proper
error check for possible short read. So use the wrapper where
appropriate and remove DMA buffers from the callers.
Signed-off-by: NHimadri Pandya <himadrispandya@gmail.com>
Link: https://lore.kernel.org/r/20210801203122.3515-5-himadrispandya@gmail.com
[ johan: amend commit message ]
Signed-off-by: NJohan Hovold <johan@kernel.org>

a7388592

USB: serial: f81232: use usb_control_msg_recv() and usb_control_msg_send() · 0d027eea

由 Himadri Pandya 提交于 8月 02, 2021

The new wrapper functions usb_control_msg_send/recv accept stack
variables for USB message buffers and eliminate the need of manually
allocating temporary DMA buffers. The read wrapper also treats short
reads as errors. Hence use the wrappers instead of using
usb_control_msg() directly.

Note that the conversion of f81534a_ctrl_set_register() adds an extra an
extra allocation and memcpy for every retry. Since this function is
called rarely and retries are hopefully rare, the overhead should be
acceptable.

Also note that short reads are now logged as -EREMOTEIO instead of
indicating the amount of data read.
Signed-off-by: NHimadri Pandya <himadrispandya@gmail.com>
Link: https://lore.kernel.org/r/20210801203122.3515-4-himadrispandya@gmail.com
[ johan: amend commit message ]
Signed-off-by: NJohan Hovold <johan@kernel.org>

0d027eea

20 9月, 2021 4 次提交

USB: serial: allow hung up ports to be suspended · 6400b974

由 Johan Hovold 提交于 9月 10, 2021

User space can keep a tty open indefinitely and that should not prevent
a hung up port and its USB device from being runtime suspended.

Fix this by incrementing the PM usage counter when the port it activated
and decrementing the counter when the port is shutdown rather than when
the tty is installed and the last reference is dropped, respectively.
Reviewed-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NJohan Hovold <johan@kernel.org>

6400b974

USB: serial: clean up core error labels · 96a83c95

由 Johan Hovold 提交于 9月 10, 2021

Clean up the core error labels by consistently naming them after what
they do rather than after from where they are jumped to.
Reviewed-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NJohan Hovold <johan@kernel.org>

96a83c95

USB: serial: option: remove duplicate USB device ID · 1ca200a8

由 Krzysztof Kozlowski 提交于 9月 17, 2021

The device ZTE 0x0094 is already on the list.
Signed-off-by: NKrzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Fixes: b9e44fe5 ("USB: option: cleanup zte 3g-dongle's pid in option.c")
Cc: stable@vger.kernel.org
Signed-off-by: NJohan Hovold <johan@kernel.org>

1ca200a8

USB: serial: mos7840: remove duplicated 0xac24 device ID · 211f3237

由 Krzysztof Kozlowski 提交于 9月 17, 2021

0xac24 device ID is already defined and used via
BANDB_DEVICE_ID_USO9ML2_4.  Remove the duplicate from the list.

Fixes: 27f1281d ("USB: serial: Extra device/vendor ID for mos7840 driver")
Signed-off-by: NKrzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Cc: stable@vger.kernel.org
Signed-off-by: NJohan Hovold <johan@kernel.org>

211f3237

13 9月, 2021 1 次提交

USB: serial: option: add Telit LN920 compositions · 7bb05713

由 Carlo Lobrano 提交于 9月 03, 2021

This patch adds the following Telit LN920 compositions:

0x1060: tty, adb, rmnet, tty, tty, tty, tty
0x1061: tty, adb, mbim, tty, tty, tty, tty
0x1062: rndis, tty, adb, tty, tty, tty, tty
0x1063: tty, adb, ecm, tty, tty, tty, tty
Signed-off-by: NCarlo Lobrano <c.lobrano@gmail.com>
Link: https://lore.kernel.org/r/20210903123913.1086513-1-c.lobrano@gmail.comReviewed-by: NDaniele Palmas <dnlplm@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: NJohan Hovold <johan@kernel.org>

7bb05713

30 8月, 2021 1 次提交

USB: serial: pl2303: fix GL type detection · dcf097e7

由 Robert Marko 提交于 8月 26, 2021

At least some PL2303GL have a bcdDevice of 0x405 instead of 0x100 as the
datasheet claims. Add it to the list of known release numbers for the
HXN (G) type.

Fixes: 894758d0 ("USB: serial: pl2303: tighten type HXN (G) detection")
Signed-off-by: NRobert Marko <robert.marko@sartura.hr>
Cc: stable@vger.kernel.org # 5.13
Link: https://lore.kernel.org/r/20210826110239.5269-1-robert.marko@sartura.hrSigned-off-by: NJohan Hovold <johan@kernel.org>

dcf097e7

26 8月, 2021 1 次提交

USB: serial: replace symbolic permissions by octal permissions · a65ab973

由 Utkarsh Verma 提交于 8月 25, 2021

Replace symbolic permission macros with octal permission numbers
because octal permission numbers are easier to read and understand
instead of their symbolic macro names.

No functional change.
Suggested-by: NLukas Bulwahn <lukas.bulwahn@gmail.com>
Signed-off-by: NUtkarsh Verma <utkarshverma294@gmail.com>
Signed-off-by: NJohan Hovold <johan@kernel.org>

a65ab973

25 8月, 2021 1 次提交

Revert "USB: serial: ch341: fix character loss at high transfer rates" · df7b16d1

由 Johan Hovold 提交于 8月 24, 2021

This reverts commit 3c18e9ba.

These devices do not appear to send a zero-length packet when the
transfer size is a multiple of the bulk-endpoint max-packet size. This
means that incoming data may not be processed by the driver until a
short packet is received or the receive buffer is full.

Revert back to using endpoint-sized receive buffers to avoid stalled
reads.
Reported-by: NPaul Größel <pb.g@gmx.de>
Link: https://bugzilla.kernel.org/show_bug.cgi?id=214131
Fixes: 3c18e9ba ("USB: serial: ch341: fix character loss at high transfer rates")
Cc: stable@vger.kernel.org
Cc: Willy Tarreau <w@1wt.eu>
Link: https://lore.kernel.org/r/20210824121926.19311-1-johan@kernel.orgSigned-off-by: NJohan Hovold <johan@kernel.org>

df7b16d1

24 8月, 2021 1 次提交

USB: serial: option: add new VID/PID to support Fibocom FG150 · 2829a4e3

由 Zhengjun Zhang 提交于 8月 09, 2021

Fibocom FG150 is a 5G module based on Qualcomm SDX55 platform,
support Sub-6G band.

Here are the outputs of lsusb -v and usb-devices:

> T:  Bus=02 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#=  2 Spd=5000 MxCh= 0
> D:  Ver= 3.20 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 9 #Cfgs=  1
> P:  Vendor=2cb7 ProdID=010b Rev=04.14
> S:  Manufacturer=Fibocom
> S:  Product=Fibocom Modem_SN:XXXXXXXX
> S:  SerialNumber=XXXXXXXX
> C:  #Ifs= 5 Cfg#= 1 Atr=a0 MxPwr=896mA
> I:  If#=0x0 Alt= 0 #EPs= 1 Cls=ef(misc ) Sub=04 Prot=01 Driver=rndis_host
> I:  If#=0x1 Alt= 0 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=rndis_host
> I:  If#=0x2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none)
> I:  If#=0x3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=(none)
> I:  If#=0x4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=(none)

> Bus 002 Device 002: ID 2cb7:010b Fibocom Fibocom Modem_SN:XXXXXXXX
> Device Descriptor:
>   bLength                18
>   bDescriptorType         1
>   bcdUSB               3.20
>   bDeviceClass            0
>   bDeviceSubClass         0
>   bDeviceProtocol         0
>   bMaxPacketSize0         9
>   idVendor           0x2cb7 Fibocom
>   idProduct          0x010b
>   bcdDevice            4.14
>   iManufacturer           1 Fibocom
>   iProduct                2 Fibocom Modem_SN:XXXXXXXX
>   iSerial                 3 XXXXXXXX
>   bNumConfigurations      1
>   Configuration Descriptor:
>     bLength                 9
>     bDescriptorType         2
>     wTotalLength       0x00e6
>     bNumInterfaces          5
>     bConfigurationValue     1
>     iConfiguration          4 RNDIS_DUN_DIAG_ADB
>     bmAttributes         0xa0
>       (Bus Powered)
>       Remote Wakeup
>     MaxPower              896mA
>     Interface Association:
>       bLength                 8
>       bDescriptorType        11
>       bFirstInterface         0
>       bInterfaceCount         2
>       bFunctionClass        239 Miscellaneous Device
>       bFunctionSubClass       4
>       bFunctionProtocol       1
>       iFunction               7 RNDIS
>     Interface Descriptor:
>       bLength                 9
>       bDescriptorType         4
>       bInterfaceNumber        0
>       bAlternateSetting       0
>       bNumEndpoints           1
>       bInterfaceClass       239 Miscellaneous Device
>       bInterfaceSubClass      4
>       bInterfaceProtocol      1
>       iInterface              0
>       ** UNRECOGNIZED:  05 24 00 10 01
>       ** UNRECOGNIZED:  05 24 01 00 01
>       ** UNRECOGNIZED:  04 24 02 00
>       ** UNRECOGNIZED:  05 24 06 00 01
>       Endpoint Descriptor:
>         bLength                 7
>         bDescriptorType         5
>         bEndpointAddress     0x81  EP 1 IN
>         bmAttributes            3
>           Transfer Type            Interrupt
>           Synch Type               None
>           Usage Type               Data
>         wMaxPacketSize     0x0008  1x 8 bytes
>         bInterval               9
>         bMaxBurst               0
>     Interface Descriptor:
>       bLength                 9
>       bDescriptorType         4
>       bInterfaceNumber        1
>       bAlternateSetting       0
>       bNumEndpoints           2
>       bInterfaceClass        10 CDC Data
>       bInterfaceSubClass      0
>       bInterfaceProtocol      0
>       iInterface              0
>       Endpoint Descriptor:
>         bLength                 7
>         bDescriptorType         5
>         bEndpointAddress     0x8e  EP 14 IN
>         bmAttributes            2
>           Transfer Type            Bulk
>           Synch Type               None
>           Usage Type               Data
>         wMaxPacketSize     0x0400  1x 1024 bytes
>         bInterval               0
>         bMaxBurst               6
>       Endpoint Descriptor:
>         bLength                 7
>         bDescriptorType         5
>         bEndpointAddress     0x0f  EP 15 OUT
>         bmAttributes            2
>           Transfer Type            Bulk
>           Synch Type               None
>           Usage Type               Data
>         wMaxPacketSize     0x0400  1x 1024 bytes
>         bInterval               0
>         bMaxBurst               6
>     Interface Descriptor:
>       bLength                 9
>       bDescriptorType         4
>       bInterfaceNumber        2
>       bAlternateSetting       0
>       bNumEndpoints           3
>       bInterfaceClass       255 Vendor Specific Class
>       bInterfaceSubClass      0
>       bInterfaceProtocol      0
>       iInterface              0
>       ** UNRECOGNIZED:  05 24 00 10 01
>       ** UNRECOGNIZED:  05 24 01 00 00
>       ** UNRECOGNIZED:  04 24 02 02
>       ** UNRECOGNIZED:  05 24 06 00 00
>       Endpoint Descriptor:
>         bLength                 7
>         bDescriptorType         5
>         bEndpointAddress     0x83  EP 3 IN
>         bmAttributes            3
>           Transfer Type            Interrupt
>           Synch Type               None
>           Usage Type               Data
>         wMaxPacketSize     0x000a  1x 10 bytes
>         bInterval               9
>         bMaxBurst               0
>       Endpoint Descriptor:
>         bLength                 7
>         bDescriptorType         5
>         bEndpointAddress     0x82  EP 2 IN
>         bmAttributes            2
>           Transfer Type            Bulk
>           Synch Type               None
>           Usage Type               Data
>         wMaxPacketSize     0x0400  1x 1024 bytes
>         bInterval               0
>         bMaxBurst               0
>       Endpoint Descriptor:
>         bLength                 7
>         bDescriptorType         5
>         bEndpointAddress     0x01  EP 1 OUT
>         bmAttributes            2
>           Transfer Type            Bulk
>           Synch Type               None
>           Usage Type               Data
>         wMaxPacketSize     0x0400  1x 1024 bytes
>         bInterval               0
>         bMaxBurst               0
>     Interface Descriptor:
>       bLength                 9
>       bDescriptorType         4
>       bInterfaceNumber        3
>       bAlternateSetting       0
>       bNumEndpoints           2
>       bInterfaceClass       255 Vendor Specific Class
>       bInterfaceSubClass    255 Vendor Specific Subclass
>       bInterfaceProtocol     48
>       iInterface              0
>       Endpoint Descriptor:
>         bLength                 7
>         bDescriptorType         5
>         bEndpointAddress     0x84  EP 4 IN
>         bmAttributes            2
>           Transfer Type            Bulk
>           Synch Type               None
>           Usage Type               Data
>         wMaxPacketSize     0x0400  1x 1024 bytes
>         bInterval               0
>         bMaxBurst               0
>       Endpoint Descriptor:
>         bLength                 7
>         bDescriptorType         5
>         bEndpointAddress     0x02  EP 2 OUT
>         bmAttributes            2
>           Transfer Type            Bulk
>           Synch Type               None
>           Usage Type               Data
>         wMaxPacketSize     0x0400  1x 1024 bytes
>         bInterval               0
>         bMaxBurst               0
>     Interface Descriptor:
>       bLength                 9
>       bDescriptorType         4
>       bInterfaceNumber        4
>       bAlternateSetting       0
>       bNumEndpoints           2
>       bInterfaceClass       255 Vendor Specific Class
>       bInterfaceSubClass     66
>       bInterfaceProtocol      1
>       iInterface              0
>       Endpoint Descriptor:
>         bLength                 7
>         bDescriptorType         5
>         bEndpointAddress     0x03  EP 3 OUT
>         bmAttributes            2
>           Transfer Type            Bulk
>           Synch Type               None
>           Usage Type               Data
>         wMaxPacketSize     0x0400  1x 1024 bytes
>         bInterval               0
>         bMaxBurst               0
>       Endpoint Descriptor:
>         bLength                 7
>         bDescriptorType         5
>         bEndpointAddress     0x85  EP 5 IN
>         bmAttributes            2
>           Transfer Type            Bulk
>           Synch Type               None
>           Usage Type               Data
>         wMaxPacketSize     0x0400  1x 1024 bytes
>         bInterval               0
>         bMaxBurst               0
> Binary Object Store Descriptor:
>   bLength                 5
>   bDescriptorType        15
>   wTotalLength       0x0016
>   bNumDeviceCaps          2
>   USB 2.0 Extension Device Capability:
>     bLength                 7
>     bDescriptorType        16
>     bDevCapabilityType      2
>     bmAttributes   0x00000006
>       BESL Link Power Management (LPM) Supported
>   SuperSpeed USB Device Capability:
>     bLength                10
>     bDescriptorType        16
>     bDevCapabilityType      3
>     bmAttributes         0x00
>     wSpeedsSupported   0x000f
>       Device can operate at Low Speed (1Mbps)
>       Device can operate at Full Speed (12Mbps)
>       Device can operate at High Speed (480Mbps)
>       Device can operate at SuperSpeed (5Gbps)
>     bFunctionalitySupport   1
>       Lowest fully-functional device speed is Full Speed (12Mbps)
>     bU1DevExitLat           1 micro seconds
>     bU2DevExitLat         500 micro seconds
> Device Status:     0x0000
>   (Bus Powered)
Signed-off-by: NZhengjun Zhang <zhangzhengjun@aicrobo.com>
Cc: stable@vger.kernel.org
Signed-off-by: NJohan Hovold <johan@kernel.org>

2829a4e3

05 8月, 2021 1 次提交

USB: serial: ftdi_sio: add device ID for Auto-M3 OP-COM v2 · 8da0e55c

由 David Bauer 提交于 8月 05, 2021

The Auto-M3 OP-COM v2 is a OBD diagnostic device using a FTD232 for the
USB connection.
Signed-off-by: NDavid Bauer <mail@david-bauer.net>
Cc: stable@vger.kernel.org
Signed-off-by: NJohan Hovold <johan@kernel.org>

8da0e55c

openeuler / Kernel 接近 2 年 前同步成功

openeuler / Kernel
接近 2 年前同步成功