1. 03 10月, 2006 1 次提交
  2. 30 9月, 2006 2 次提交
    • S
      [PATCH] pidspace: is_init() · f400e198
      Sukadev Bhattiprolu 提交于
      This is an updated version of Eric Biederman's is_init() patch.
      (http://lkml.org/lkml/2006/2/6/280).  It applies cleanly to 2.6.18-rc3 and
      replaces a few more instances of ->pid == 1 with is_init().
      
      Further, is_init() checks pid and thus removes dependency on Eric's other
      patches for now.
      
      Eric's original description:
      
      	There are a lot of places in the kernel where we test for init
      	because we give it special properties.  Most  significantly init
      	must not die.  This results in code all over the kernel test
      	->pid == 1.
      
      	Introduce is_init to capture this case.
      
      	With multiple pid spaces for all of the cases affected we are
      	looking for only the first process on the system, not some other
      	process that has pid == 1.
      Signed-off-by: NEric W. Biederman <ebiederm@xmission.com>
      Signed-off-by: NSukadev Bhattiprolu <sukadev@us.ibm.com>
      Cc: Dave Hansen <haveblue@us.ibm.com>
      Cc: Serge Hallyn <serue@us.ibm.com>
      Cc: Cedric Le Goater <clg@fr.ibm.com>
      Cc: <lxc-devel@lists.sourceforge.net>
      Acked-by: NPaul Mackerras <paulus@samba.org>
      Signed-off-by: NAndrew Morton <akpm@osdl.org>
      Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
      f400e198
    • J
      [PATCH] make PROT_WRITE imply PROT_READ · df67b3da
      Jason Baron 提交于
      Make PROT_WRITE imply PROT_READ for a number of architectures which don't
      support write only in hardware.
      
      While looking at this, I noticed that some architectures which do not
      support write only mappings already take the exact same approach.  For
      example, in arch/alpha/mm/fault.c:
      
      "
              if (cause < 0) {
                      if (!(vma->vm_flags & VM_EXEC))
                              goto bad_area;
              } else if (!cause) {
                      /* Allow reads even for write-only mappings */
                      if (!(vma->vm_flags & (VM_READ | VM_WRITE)))
                              goto bad_area;
              } else {
                      if (!(vma->vm_flags & VM_WRITE))
                              goto bad_area;
              }
      "
      
      Thus, this patch brings other architectures which do not support write only
      mappings in-line and consistent with the rest.  I've verified the patch on
      ia64, x86_64 and x86.
      
      Additional discussion:
      
      Several architectures, including x86, can not support write-only mappings.
      The pte for x86 reserves a single bit for protection and its two states are
      read only or read/write.  Thus, write only is not supported in h/w.
      
      Currently, if i 'mmap' a page write-only, the first read attempt on that page
      creates a page fault and will SEGV.  That check is enforced in
      arch/blah/mm/fault.c.  However, if i first write that page it will fault in
      and the pte will be set to read/write.  Thus, any subsequent reads to the page
      will succeed.  It is this inconsistency in behavior that this patch is
      attempting to address.  Furthermore, if the page is swapped out, and then
      brought back the first read will also cause a SEGV.  Thus, any arbitrary read
      on a page can potentially result in a SEGV.
      
      According to the SuSv3 spec, "if the application requests only PROT_WRITE, the
      implementation may also allow read access." Also as mentioned, some
      archtectures, such as alpha, shown above already take the approach that i am
      suggesting.
      
      The counter-argument to this raised by Arjan, is that the kernel is enforcing
      the write only mapping the best it can given the h/w limitations.  This is
      true, however Alan Cox, and myself would argue that the inconsitency in
      behavior, that is applications can sometimes work/sometimes fails is highly
      undesireable.  If you read through the thread, i think people, came to an
      agreement on the last patch i posted, as nobody has objected to it...
      Signed-off-by: NJason Baron <jbaron@redhat.com>
      Cc: Russell King <rmk@arm.linux.org.uk>
      Cc: "Luck, Tony" <tony.luck@intel.com>
      Cc: Hugh Dickins <hugh@veritas.com>
      Cc: Roman Zippel <zippel@linux-m68k.org>
      Cc: Geert Uytterhoeven <geert@linux-m68k.org>
      Cc: Paul Mackerras <paulus@samba.org>
      Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
      Acked-by: NAndi Kleen <ak@muc.de>
      Acked-by: NAlan Cox <alan@lxorguk.ukuu.org.uk>
      Cc: Arjan van de Ven <arjan@linux.intel.com>
      Acked-by: NPaul Mundt <lethal@linux-sh.org>
      Cc: Kazumoto Kojima <kkojima@rr.iij4u.or.jp>
      Cc: Ian Molton <spyro@f2s.com>
      Signed-off-by: NAndrew Morton <akpm@osdl.org>
      Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
      df67b3da
  3. 27 9月, 2006 24 次提交
  4. 26 9月, 2006 1 次提交
    • D
      [PATCH] Standardize pxx_page macros · 46a82b2d
      Dave McCracken 提交于
      One of the changes necessary for shared page tables is to standardize the
      pxx_page macros.  pte_page and pmd_page have always returned the struct
      page associated with their entry, while pte_page_kernel and pmd_page_kernel
      have returned the kernel virtual address.  pud_page and pgd_page, on the
      other hand, return the kernel virtual address.
      
      Shared page tables needs pud_page and pgd_page to return the actual page
      structures.  There are very few actual users of these functions, so it is
      simple to standardize their usage.
      
      Since this is basic cleanup, I am submitting these changes as a standalone
      patch.  Per Hugh Dickins' comments about it, I am also changing the
      pxx_page_kernel macros to pxx_page_vaddr to clarify their meaning.
      Signed-off-by: NDave McCracken <dmccr@us.ibm.com>
      Cc: Hugh Dickins <hugh@veritas.com>
      Signed-off-by: NAndrew Morton <akpm@osdl.org>
      Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
      46a82b2d
  5. 01 7月, 2006 1 次提交
  6. 22 3月, 2006 3 次提交
    • D
      [PATCH] hugepage: is_aligned_hugepage_range() cleanup · 42b88bef
      David Gibson 提交于
      Quite a long time back, prepare_hugepage_range() replaced
      is_aligned_hugepage_range() as the callback from mm/mmap.c to arch code to
      verify if an address range is suitable for a hugepage mapping.
      is_aligned_hugepage_range() stuck around, but only to implement
      prepare_hugepage_range() on archs which didn't implement their own.
      
      Most archs (everything except ia64 and powerpc) used the same
      implementation of is_aligned_hugepage_range().  On powerpc, which
      implements its own prepare_hugepage_range(), the custom version was never
      used.
      
      In addition, "is_aligned_hugepage_range()" was a bad name, because it
      suggests it returns true iff the given range is a good hugepage range,
      whereas in fact it returns 0-or-error (so the sense is reversed).
      
      This patch cleans up by abolishing is_aligned_hugepage_range().  Instead
      prepare_hugepage_range() is defined directly.  Most archs use the default
      version, which simply checks the given region is aligned to the size of a
      hugepage.  ia64 and powerpc define custom versions.  The ia64 one simply
      checks that the range is in the correct address space region in addition to
      being suitably aligned.  The powerpc version (just as previously) checks
      for suitable addresses, and if necessary performs low-level MMU frobbing to
      set up new areas for use by hugepages.
      
      No libhugetlbfs testsuite regressions on ppc64 (POWER5 LPAR).
      Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>
      Signed-off-by: NZhang Yanmin <yanmin.zhang@intel.com>
      Cc: "David S. Miller" <davem@davemloft.net>
      Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
      Cc: Paul Mackerras <paulus@samba.org>
      Cc: William Lee Irwin III <wli@holomorphy.com>
      Signed-off-by: NAndrew Morton <akpm@osdl.org>
      Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
      42b88bef
    • N
      [PATCH] remove set_page_count() outside mm/ · 7835e98b
      Nick Piggin 提交于
      set_page_count usage outside mm/ is limited to setting the refcount to 1.
      Remove set_page_count from outside mm/, and replace those users with
      init_page_count() and set_page_refcounted().
      
      This allows more debug checking, and tighter control on how code is allowed
      to play around with page->_count.
      Signed-off-by: NNick Piggin <npiggin@suse.de>
      Signed-off-by: NAndrew Morton <akpm@osdl.org>
      Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
      7835e98b
    • N
      [PATCH] mm: split highorder pages · 8dfcc9ba
      Nick Piggin 提交于
      Have an explicit mm call to split higher order pages into individual pages.
       Should help to avoid bugs and be more explicit about the code's intention.
      Signed-off-by: NNick Piggin <npiggin@suse.de>
      Cc: Russell King <rmk@arm.linux.org.uk>
      Cc: David Howells <dhowells@redhat.com>
      Cc: Ralf Baechle <ralf@linux-mips.org>
      Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
      Cc: Paul Mundt <lethal@linux-sh.org>
      Cc: "David S. Miller" <davem@davemloft.net>
      Cc: Chris Zankel <chris@zankel.net>
      Signed-off-by: NYoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
      Signed-off-by: NAndrew Morton <akpm@osdl.org>
      Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
      8dfcc9ba
  7. 17 1月, 2006 2 次提交
  8. 07 11月, 2005 2 次提交
  9. 30 10月, 2005 3 次提交
    • H
      [PATCH] mm: i386 sh sh64 ready for split ptlock · 60ec5585
      Hugh Dickins 提交于
      Use pte_offset_map_lock, instead of pte_offset_map (or inappropriate
      pte_offset_kernel) and mm-wide page_table_lock, in sundry arch places.
      
      The i386 vm86 mark_screen_rdonly: yes, there was and is an assumption that the
      screen fits inside the one page table, as indeed it does.
      
      The sh __do_page_fault: which handles both kernel faults (without lock) and
      user mm faults (locked - though it set_pte without locking before).
      
      The sh64 flush_cache_range and helpers: which wrongly thought callers held
      page_table_lock before (only its tlb_start_vma did, and no longer does so);
      moved the flush loop down, and adjusted the large versus small range decision
      to consider a range which spans page tables as large.
      Signed-off-by: NHugh Dickins <hugh@veritas.com>
      Acked-by: NPaul Mundt <lethal@linux-sh.org>
      Signed-off-by: NAndrew Morton <akpm@osdl.org>
      Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
      60ec5585
    • H
      [PATCH] mm: init_mm without ptlock · 872fec16
      Hugh Dickins 提交于
      First step in pushing down the page_table_lock.  init_mm.page_table_lock has
      been used throughout the architectures (usually for ioremap): not to serialize
      kernel address space allocation (that's usually vmlist_lock), but because
      pud_alloc,pmd_alloc,pte_alloc_kernel expect caller holds it.
      
      Reverse that: don't lock or unlock init_mm.page_table_lock in any of the
      architectures; instead rely on pud_alloc,pmd_alloc,pte_alloc_kernel to take
      and drop it when allocating a new one, to check lest a racing task already
      did.  Similarly no page_table_lock in vmalloc's map_vm_area.
      
      Some temporary ugliness in __pud_alloc and __pmd_alloc: since they also handle
      user mms, which are converted only by a later patch, for now they have to lock
      differently according to whether or not it's init_mm.
      
      If sources get muddled, there's a danger that an arch source taking
      init_mm.page_table_lock will be mixed with common source also taking it (or
      neither take it).  So break the rules and make another change, which should
      break the build for such a mismatch: remove the redundant mm arg from
      pte_alloc_kernel (ppc64 scrapped its distinct ioremap_mm in 2.6.13).
      
      Exceptions: arm26 used pte_alloc_kernel on user mm, now pte_alloc_map; ia64
      used pte_alloc_map on init_mm, now pte_alloc_kernel; parisc had bad args to
      pmd_alloc and pte_alloc_kernel in unused USE_HPPA_IOREMAP code; ppc64
      map_io_page forgot to unlock on failure; ppc mmu_mapin_ram and ppc64 im_free
      took page_table_lock for no good reason.
      Signed-off-by: NHugh Dickins <hugh@veritas.com>
      Signed-off-by: NAndrew Morton <akpm@osdl.org>
      Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
      872fec16
    • H
      [PATCH] mm: sh64 hugetlbpage.c · 147efea8
      Hugh Dickins 提交于
      The sh64 hugetlbpage.c seems to be erroneous, left over from a bygone age,
      clashing with the common hugetlb.c.  Replace it by a copy of the sh
      hugetlbpage.c.  Except, delete that mk_pte_huge macro neither uses.
      Signed-off-by: NHugh Dickins <hugh@veritas.com>
      Acked-by: NPaul Mundt <lethal@linux-sh.org>
      Signed-off-by: NAndrew Morton <akpm@osdl.org>
      Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
      147efea8
  10. 28 10月, 2005 1 次提交
新手
引导
客服 返回
顶部