Commit 7d902c05 ("drm: Nuke drm_atomic_helper_connector_dpms")
removed drm_atomic_helper_connector_dpms() helper saying that it was a dead
code. It was however indirectly used by Exynos DRM driver for implementing
suspend/resume support. To fix this regression (after that patch Exynos DRM
suspend/resume functions became no-ops and hardware fails to suspend),
this patch rewrites them with drm_atomic_helper_suspend/resume() helpers.

Fixes: 7d902c05 ("drm: Nuke drm_atomic_helper_connector_dpms")
Signed-off-by: NMarek Szyprowski <m.szyprowski@samsung.com>
Acked-by: NKrzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: NInki Dae <inki.dae@samsung.com>

The video processor supports a tiled version of the NV12 format,
known as NV12MT in V4L2 terms. The support was removed in commit
083500ba due to not being a real
pixel format, but rather NV12 with a special memory layout.

With the introduction of FB modifiers, we can now properly support
this format again.

Tested with a hacked up modetest from libdrm's test suite on
an ODROID-X2 (Exynos4412).
Signed-off-by: NTobias Jakobi <tjakobi@math.uni-bielefeld.de>
Signed-off-by: NInki Dae <inki.dae@samsung.com>

crtc::mode_valid callback is required to implement proper pipeline
validation for command/video modes. Since Exynos uses private
framework such callback should be added to it.
Signed-off-by: NAndrzej Hajda <a.hajda@samsung.com>
Signed-off-by: NInki Dae <inki.dae@samsung.com>

mipi_dsi framework provides information about panel's mode of work.
This info should be propagated upstream to configure all elements of
the pipeline. As CRTC is the common denominator of the pipeline we can
put such info into its structures.
Signed-off-by: NAndrzej Hajda <a.hajda@samsung.com>
Signed-off-by: NInki Dae <inki.dae@samsung.com>

All Exynos CRTCs are fully configured by .enable callback. The only users
of mode_set_nofb actually did nothing in their callbacks - they immediately
returned because devices were in suspend state - mode_set_nofb is always
called on disabled device.
Signed-off-by: NAndrzej Hajda <a.hajda@samsung.com>
Signed-off-by: NInki Dae <inki.dae@samsung.com>

The field duplicates drm_dev->mode_config.num_crtc.
Signed-off-by: NAndrzej Hajda <a.hajda@samsung.com>
Signed-off-by: NInki Dae <inki.dae@samsung.com>

Since crtc index is stored in drm_crtc pipe field became redundant.
The patch beside removing the field simplifies also
exynos_drm_crtc_get_pipe_from_type.
Signed-off-by: NAndrzej Hajda <a.hajda@samsung.com>
Signed-off-by: NInki Dae <inki.dae@samsung.com>

DECON in Exynos5433 has frame counter, it can be used to implement
get_vblank_counter callback.
Signed-off-by: NAndrzej Hajda <a.hajda@samsung.com>
Signed-off-by: NInki Dae <inki.dae@samsung.com>

This patch removes unnecessary descriptions on
exynos_drm_crtc structure and adds one description
which specifies what pipe_clk member does.

pipe_clk support had been added by below patch without any description,
	 drm/exynos: add support for pipeline clock to the framework
		Commit-id : f26b9343Signed-off-by: NInki Dae <inki.dae@samsung.com>

The vblank hooks in struct drm_driver are deprecated and only meant for
legacy drivers.  For modern drivers with DRIVER_MODESET flag, the hooks
in struct drm_crtc_funcs should be used instead.

As the result, exynos_drm_crtc_enable[disable]_vblank() become static
functions.  They are moved around a bit to save forward declaration
though.  Also while at it, we move one step further to kill
exynos_drm_crtc_from_pipe() completely by updating hdmi_bind() a bit.
Signed-off-by: NShawn Guo <shawn.guo@linaro.org>
Cc: Inki Dae <inki.dae@samsung.com>
Reviewed-by: NAndrzej Hajda <a.hajda@samsung.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1486458995-31018-9-git-send-email-shawnguo@kernel.org

Use drm_crtc_from_index() to find drm_crtc for given index, so that we
do not need to maintain a pointer array in struct exynos_drm_private.
Signed-off-by: NShawn Guo <shawn.guo@linaro.org>
Cc: Inki Dae <inki.dae@samsung.com>
Signed-off-by: NSean Paul <seanpaul@chromium.org>
Link: http://patchwork.freedesktop.org/patch/msgid/1483961145-18453-2-git-send-email-shawnguo@kernel.org

We don't want all planes to be added to the state whenever a
plane with fixed zpos gets enabled/disabled. This is true
especially for eg. cursor planes on i915, as we want cursor
updates to go through w/o throttling. Same holds for drivers
that don't support zpos at all (i915 actually falls into this
category right now since we've not yet added zpos support).

Allow drivers more freedom by letting them deal with zpos
themselves instead of doing it in drm_atomic_helper_check_planes()
unconditionally. Let's just inline the required calls into all
the driver that currently depend on this.

v2: Inline the stuff into the drivers instead of adding another
    helper, document things better (Daniel)

Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Marek Szyprowski <m.szyprowski@samsung.com>
Cc: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Cc: Vincent Abriou <vincent.abriou@st.com>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Inki Dae <inki.dae@samsung.com>
Cc: Joonyoung Shim <jy0922.shim@samsung.com>
Cc: Seung-Woo Kim <sw0312.kim@samsung.com>
Cc: Kyungmin Park <kyungmin.park@samsung.com>
Cc: Lyude <cpaul@redhat.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: stable@vger.kernel.org
Fixes: 44d1240d ("drm: add generic zpos property")
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: NSean Paul <seanpaul@chromium.org>
Acked-by: NBenjamin Gaignard <benjamin.gaignard@linaro.org>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1476111056-12734-1-git-send-email-ville.syrjala@linux.intel.com

Exynos DRM framework handled page-flip event with custom code.
The patch replaces it with drm-core vblank queue.
Signed-off-by: NAndrzej Hajda <a.hajda@samsung.com>
Signed-off-by: NInki Dae <inki.dae@samsung.com>

Exynos DRM devices update their registers at vblank time. Exynos-DRM uses
custom mechanism to wait for vblank. This mechanism is error prone -
variables are not updated atomically. As a result in certain circumstances
user space can try to free buffers which are still in use by hardware,
in such cases IOMMU can throw OOPS.
The patch instead of fixing the mechanism replaces it with drm core helper.
Signed-off-by: NAndrzej Hajda <a.hajda@samsung.com>
Reviewed-by: NGustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: NInki Dae <inki.dae@samsung.com>

This patch replaces zpos property handling custom code in Exynos DRM
driver with calls to generic DRM code.
Signed-off-by: NMarek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: NBenjamin Gaignard <benjamin.gaignard@linaro.org>

Cc: Inki Dae <inki.dae@samsung.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Ville Syrjala <ville.syrjala@linux.intel.com>
Cc: Joonyoung Shim <jy0922.shim@samsung.com>
Cc: Seung-Woo Kim <sw0312.kim@samsung.com>
Cc: Andrzej Hajda <a.hajda@samsung.com>
Cc: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Cc: Tobias Jakobi <tjakobi@math.uni-bielefeld.de>
Cc: Gustavo Padovan <gustavo@padovan.org>
Cc: vincent.abriou@st.com
Cc: fabien.dessenne@st.com
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>

This patch removes unused entries from exynos_drm_private strcuture.
da_start/da_space_size were only used in drm_create_iommu_mapping()
function and never set to other value than the defaults. Instead use
default values directly in arm_iommu_create_mapping() call.
Signed-off-by: NMarek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: NInki Dae <inki.dae@samsung.com>

The async name is deprecated and should be changed to nonblocking.

Cc: Inki Dae <inki.dae@samsung.com>
Signed-off-by: NMaarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1461679905-30177-5-git-send-email-maarten.lankhorst@linux.intel.com

This patch cleans up wait_for_vblank relevant codes.
wait_for_vblank callback isn't used anymore in Exynos drm driver
so it removes relevant codes. However, display controllers -
FIMD and DECON - still use this function driver internally
to ensure shadow registers to be updated, which resolves
page fault issue so keep it.
Signed-off-by: NInki Dae <inki.dae@samsung.com>

clock_enable callback is used only by FIMD->DP pipeline. Similar but more
universal functionality provides pipeline clock.
Signed-off-by: NAndrzej Hajda <a.hajda@samsung.com>
Signed-off-by: NInki Dae <daeinki@gmail.com>

Components belonging to the same pipeline often requires
synchronized clocks. Such clocks are sometimes provided
by external clock controller, but they can be also provided by
pipeline components. In latter case there should be a way
to access them from another component belonging to the same pipeline.
This is the case of:
- DECON,FIMD -> HDMI and HDMI-PHY clock,
- FIMD -> DP and DP clock in FIMD.
The latter case has been solved by clock_enable callback
in exynos_drm_crtc_ops. This solutin will not work with
HDMI path as in this case clock is provided by encoder.

This patch provides more generic solution allowing to register
pipeline clock during initialization in exynos_drm_crtc structure.
This way the clock will be easily accessible from both components.
Signed-off-by: NAndrzej Hajda <a.hajda@samsung.com>
Signed-off-by: NInki Dae <inki.dae@samsung.com>

The helper abstracts out conversion from pipeline
to crtc. Currently it is used in two places, but
there will be more uses in next patches.
Signed-off-by: NAndrzej Hajda <a.hajda@samsung.com>
Signed-off-by: NInki Dae <inki.dae@samsung.com>

This patch changes device pointer provided to all calls to DMA-mapping
subsystem from the virtual exynos-drm 'device' to the real device pointer
of one of the CRTC devices (decon, fimd or mixer). This way no more hacks
will be needed to configure proper DMA-mapping address space on the common
virtual exynos-drm device. This change also removes the need for some
hacks in IOMMU related code. It also finally solves the problem of Exynos
DRM driver not working on ARM64 architecture, which provides noop-based
DMA-mapping operations for virtual platform devices.
Signed-off-by: NMarek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: NInki Dae <inki.dae@samsung.com>

This patch refactors driver and device registration by moving all drivers
to the common array. This way additional flags can be added later for
new features. #ifdef-based code has been replaced by IS_ENABLED() macro
usage.
Signed-off-by: NMarek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: NInki Dae <inki.dae@samsung.com>

Some CRTC drivers (like Exynos DRM Mixer) can handle blocking register
updates only on per-device level, not per-plane level. This patch changes
exynos_crts atomic_begin/atomic_flush callbacks to handle the entire crtc,
instead of given planes, so driver can handle both cases on their own.
Signed-off-by: NMarek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: NInki Dae <inki.dae@samsung.com>

This patch adds all infrastructure to make zpos plane property
configurable from userspace.
Signed-off-by: NMarek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: NInki Dae <inki.dae@samsung.com>

This patch renames zpos entry to index, because in most places it is
used as index for selecting hardware layer/window instead of
configurable layer position. This will later enable to make the zpos
property configurable.
Signed-off-by: NMarek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: NInki Dae <inki.dae@samsung.com>

This patch adds generic check for plane state - display area dimensions,
so drivers can always assume that they get valid plane state to set.
Signed-off-by: NMarek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: NGustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: NInki Dae <inki.dae@samsung.com>

This patch adds common structure for keeping plane configuration and
capabilities data. This patch is inspired by similar code developed by
Tobias Jakobi.

Changelog v2:
- fix vidi_win_types(i) call. vidi_win_types is not a function.
Signed-off-by: NMarek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: NInki Dae <inki.dae@samsung.com>

This patch introduces exynos_drm_plane_state structure, which subclasses
drm_plane_state and holds precalculated data suitable for configuring
Exynos hardware.
Signed-off-by: NMarek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: NGustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: NInki Dae <inki.dae@samsung.com>

DMA address is a framebuffer attribute and the right place for it is
exynos_drm_framebuffer not exynos_drm_plane. This patch also introduces
helper function for getting dma address of the given framebuffer.

Changelog v2:
- use state->fb instead of plane->base.fb.
Signed-off-by: NMarek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: NGustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: NInki Dae <inki.dae@samsung.com>

Some CRTCs needs mode validation, this patch adds neccessary
callback to Exynos DRM framework. It is called from DRM core
via atomic_check helper for drm_crtc.
Signed-off-by: NAndrzej Hajda <a.hajda@samsung.com>
Signed-off-by: NInki Dae <inki.dae@samsung.com>

Define DEFAULT_WIN as zero to help set the primary plane on all CRTCs.
Some CRTCs were defining a variable to store the default window, but that
is not necessary as the default (primary) window is always the window zero.
Signed-off-by: NGustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: NInki Dae <inki.dae@samsung.com>

CRTC's mode_fixup() isn't used anymore in exynos, remove it.
Signed-off-by: NGustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: NInki Dae <inki.dae@samsung.com>

Exynos atomic commit procedures already does this job of waiting for
pending updates to finish, that means using pending_flip_queue is
pointless now because the disable CRTC procedure will never happen
during a page_flip.
Signed-off-by: NGustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: NInki Dae <inki.dae@samsung.com>

Add infrastructure to wait for all planes updates to finish by using
an atomic_t variable to track how many pending updates we are waiting
plus a wait_queue for the wait part.

It also changes vblank behaviour and keeps it enabled for all types
of updates
Signed-off-by: NGustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: NInki Dae <inki.dae@samsung.com>

The atomic modesetting interfaces supports async commits that should be
implemented by the drivers. If drm core requests an async commit
exynos_atomic_commit() will now schedule a work task to run the update later.

It also serializes commits that needs to run on the same crtc, putting the
following commit to wait until the current one is finished.
Signed-off-by: NGustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: NInki Dae <inki.dae@samsung.com>

The current code was ignoring the end of update for all overlay planes,
caring only for the primary plane update in case of pageflip.

This change adds a change to start to check for pending updates for all
planes through exynos_plane->pending_fb. At the start of plane update the
pending_fb is set with the fb to be shown on the screen. Then only when to
fb is already presented in the screen we set pending_fb to NULL to
signal that the update was finished.
Signed-off-by: NGustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: NInki Dae <inki.dae@samsung.com>

fixup! drm/exynos: check for pending fb before finish update

From: Gustavo Padovan <gustavo.padovan@collabora.co.uk>

.prepare_plane() and .cleanup_plane() allows to perform extra operations
before and after the update of planes. For FIMD for example this will
be used to enable disable the shadow protection bit.
Signed-off-by: NGustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: NInki Dae <inki.dae@samsung.com>

struct drm_crtc already stores the enabled state of the crtc
thus we don't need to replicate enabled in exynos_drm_crtc.
Signed-off-by: NGustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: NInki Dae <inki.dae@samsung.com>

struct exynos_drm_encoder was justing wrapping struct drm_encoder, it had
only a drm_encoder member and the internal exynos_drm_encoders ops that
was directly mapped to the drm_encoder helper funcs.

So now exynos DRM uses struct drm_encoder directly, this removes
completely the struct exynos_drm_encoder.

v2: add empty .mode_fixup() and .mode_set() to DSI and DPI to avoid null
pointer.
Signed-off-by: NGustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: NInki Dae <inki.dae@samsung.com>