Uwe pointed out that my alarm based UIE emulation is not sufficient
to replace the older timer/polling based UIE emulation on devices
where there is no alarm irq. This causes rtc devices without alarms
to return -EINVAL to UIE ioctls. The fix is to re-instate the old
timer/polling method for devices without alarm irqs.

This patch reverts the following commits:
042620a0 - Remove UIE emulation
1daeddd5 - Cleanup removed UIE emulation declaration
b5cc8ca1 - Remove Kconfig symbol for UIE emulation

The emulation mode will still need to be wired-in with a following
patch before it will work.

CC: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
CC: Thomas Gleixner <tglx@linutronix.de>
Reported-by: NUwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: NJohn Stultz <john.stultz@linaro.org>

On hardware that doesn't support alarm interrupts, rtc_alarm_irq_enable
could return without releasing the ops_lock mutex.

This was introduced in
	aa0be0f4 (RTC: Propagate error handling via rtc_timer_enqueue properly)

This patch corrects the issue by only returning once the mutex is
released.

[john.stultz: Reworded the commit log]
Signed-off-by: NUwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: NJohn Stultz <john.stultz@linaro.org>

Two rtc drivers return values from void functions. This patch
fixes that.

CC: Thomas Gleixner <tglx@linutronix.de>
CC: Alessandro Zummo <a.zummo@towertech.it>
CC: Marcelo Roberto Jimenez <mroberto@cpti.cetuc.puc-rio.br>
Signed-off-by: NJohn Stultz <john.stultz@linaro.org>

Some rtc drivers use the ioctl method instead of the alarm_irq_enable
method for enabling alarm interupts. With the new virtualized RTC
rework, its important for drivers to use the alarm_irq_enable instead.

This patch converts the drivers that use the AIE ioctl method to
use the alarm_irq_enable method. Other ioctl cmds are left untouched.

I have not been able to test or even compile most of these drivers.
Any help to make sure this change is correct would be appreciated!

CC: Alessandro Zummo <a.zummo@towertech.it>
CC: Thomas Gleixner <tglx@linutronix.de>
CC: Marcelo Roberto Jimenez <mroberto@cpti.cetuc.puc-rio.br>
Reported-by: NMarcelo Roberto Jimenez <mroberto@cpti.cetuc.puc-rio.br>
Tested-by: NMarcelo Roberto Jimenez <mroberto@cpti.cetuc.puc-rio.br>
Signed-off-by: NJohn Stultz <john.stultz@linaro.org>

Some RTC drivers enable functionality directly via their ioctl method
instead of using the generic ioctl handling code. With the recent
virtualization of the RTC layer, its now important that the generic
layer always be used.

This patch moved the rtc driver ioctl method call to after the generic
ioctl processing is done. This allows hardware specific features or
ioctls to still function, while relying on the generic code for handling
everything else.

This patch on its own may more obviously break rtc drivers that
implement the alarm irq enablement via their ioctl method instead of
implementing the alarm_irq_eanble method. Those drivers will be fixed
in a following patch. Additionaly, those drivers are already likely to
not be functioning reliably without this patch.

CC: Alessandro Zummo <a.zummo@towertech.it>
CC: Marcelo Roberto Jimenez <mroberto@cpti.cetuc.puc-rio.br>
CC: Thomas Gleixner <tglx@linutronix.de>
Reported-by: NMarcelo Roberto Jimenez <mroberto@cpti.cetuc.puc-rio.br>
Tested-by: NMarcelo Roberto Jimenez <mroberto@cpti.cetuc.puc-rio.br>
Signed-off-by: NJohn Stultz <john.stultz@linaro.org>

This patch prevents a user space program from calling the RTC_IRQP_SET
ioctl with a negative value of frequency. Also, if this call is make
with a zero value of frequency, there would be a division by zero in the
kernel code.

[jstultz: Also initialize irq_freq to 1 to catch other divbyzero issues]

CC: Alessandro Zummo <a.zummo@towertech.it>
CC: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: NMarcelo Roberto Jimenez <mroberto@cpti.cetuc.puc-rio.br>
Signed-off-by: NJohn Stultz <john.stultz@linaro.org>

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband:
  RDMA: Update missed conversion of flush_scheduled_work()
  RDMA/ucma: Copy iWARP route information on queries
  RDMA/amso1100: Fix compile warnings
  RDMA/cxgb4: Set the correct device physical function for iWARP connections
  RDMA/cxgb4: Limit MAXBURST EQ context field to 256B
  IB/qib: Hold link for TX SERDES settings
  mlx4_core: Add ConnectX-3 device IDs

Merge branch 'irq-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'irq-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  genirq: Prevent irq storm on migration

Merge branch 'sched-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'sched-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  sched: Fix update_curr_rt()
  sched, docs: Update schedstats documentation to version 15

Merge branch 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  perf: Fix reading in perf_event_read()
  watchdog: Don't change watchdog state on read of sysctl
  watchdog: Fix sysctl consistency
  watchdog: Fix broken nowatchdog logic
  perf: Fix Pentium4 raw event validation
  perf: Fix alloc_callchain_buffers()

cpu_stopper_thread()
  migration_cpu_stop()
    __migrate_task()
      deactivate_task()
        dequeue_task()
          dequeue_task_rq()
            update_curr_rt()

Will call update_curr_rt() on rq->curr, which at that time is
rq->stop. The problem is that rq->stop.prio matches an RT prio and
thus falsely assumes its a rt_sched_class task.
Reported-Debuged-Tested-Acked-by: NThomas Gleixner <tglx@linutronix.de>
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <new-submission>
Cc: stable@kernel.org # .37
Signed-off-by: NIngo Molnar <mingo@elte.hu>

It is quite possible for the event to have been disabled between
perf_event_read() sending the IPI and the CPU servicing the IPI and
calling __perf_event_read(), hence revalidate the state.
Reported-by: NStephane Eranian <eranian@google.com>
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <new-submission>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

This reverts commit 115e19c5.

Apparently setting inode->bdi to one's own sb->s_bdi stops VFS from
sending *read-aheads*.  This problem was bisected to this commit.  A
revert fixes it.  I'll investigate farther why is this happening for the
next Kernel, but for now a revert.

I'm sending to stable@kernel.org as well, since it exists also in
2.6.37.  2.6.36 is good and does not have this patch.

CC: Stable Tree <stable@kernel.org>
Signed-off-by: NBoaz Harrosh <bharrosh@panasas.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

* 'media_fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6:
  [media] fix saa7111 non-detection
  [media] rc/streamzap: fix reporting response times
  [media] mceusb: really fix remaining keybounce issues
  [media] rc: use time unit conversion macros correctly
  [media] rc/ir-lirc-codec: add back debug spew
  [media] ir-kbd-i2c: improve remote behavior with z8 behind usb
  [media] lirc_zilog: z8 on usb doesn't like back-to-back i2c_master_send
  [media] hdpvr: fix up i2c device registration
  [media] rc/mce: add mappings for missing keys
  [media] gspca - zc3xx: Discard the partial frames
  [media] gspca - zc3xx: Fix bad images with the sensor hv7131r
  [media] gspca - zc3xx: Bad delay when given by a table

* 'for-linus' of git://git390.marist.edu/pub/scm/linux-2.6:
  [S390] reset default for CONFIG_CHSC_SCH
  [S390] qdio: prevent compile warning under CONFIG_32BIT
  [S390] use asm-generic/cacheflush.h
  [S390] tlb: fix build error caused by THP
  [S390] missing sacf in uaccess
  [S390] pgtable_list corruption
  [S390] dasd: prevent panic with unresumed devices

Some filesystems don't deal well with being asked to map less than
blocksize blocks (GFS2 for example).  Since we are always mapping at least
blocksize sections anyway, just make sure len is at least as big as a
blocksize so we don't trip up any filesystems.  Thanks,
Signed-off-by: NJosef Bacik <josef@redhat.com>
Cc: Steven Whitehouse <swhiteho@redhat.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

FMODE_EXEC is a constant type of fmode_t but was used with normal integer
constants.  This results in following warnings from sparse.  Fix it using
new macro __FMODE_EXEC.

 fs/exec.c:116:58: warning: restricted fmode_t degrades to integer
 fs/exec.c:689:58: warning: restricted fmode_t degrades to integer
 fs/fcntl.c:777:9: warning: restricted fmode_t degrades to integer
Signed-off-by: NNamhyung Kim <namhyung@gmail.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

AND-ing FMODE_* constant with normal integer results in following
sparse warnings. Fix it.

 fs/open.c:662:21: warning: restricted fmode_t degrades to integer
 fs/anon_inodes.c:123:34: warning: restricted fmode_t degrades to integer
Signed-off-by: NNamhyung Kim <namhyung@gmail.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Changes in e401f176 ("memcg: modify accounting function for supporting
THP better") adds nr_pages to support multiple page size in
memory_cgroup_charge_statistics.

But counting the number of event nees abs(nr_pages) for increasing
counters.  This patch fixes event counting.
Signed-off-by: NKAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Reviewed-by: NJohannes Weiner <hannes@cmpxchg.org>
Cc: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Cc: Balbir Singh <balbir@in.ibm.com>
Cc: Minchan Kim <minchan.kim@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Huge page coverage should obviously have less priority than the continued
execution of a process.

Never kill a process when charging it a huge page fails.  Instead, give up
after the first failed reclaim attempt and fall back to regular pages.
Signed-off-by: NJohannes Weiner <hannes@cmpxchg.org>
Acked-by: NKAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Reviewed-by: NMinchan Kim <minchan.kim@gmail.com>
Cc: Balbir Singh <balbir@linux.vnet.ibm.com>
Cc: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

If reclaim after a failed charging was unsuccessful, the limits are
checked again, just in case they settled by means of other tasks.

This is all fine as long as every charge is of size PAGE_SIZE, because in
that case, being below the limit means having at least PAGE_SIZE bytes
available.

But with transparent huge pages, we may end up in an endless loop where
charging and reclaim fail, but we keep going because the limits are not
yet exceeded, although not allowing for a huge page.

Fix this up by explicitely checking for enough room, not just whether we
are within limits.
Signed-off-by: NJohannes Weiner <hannes@cmpxchg.org>
Acked-by: NKAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Reviewed-by: NMinchan Kim <minchan.kim@gmail.com>
Cc: Balbir Singh <balbir@linux.vnet.ibm.com>
Cc: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The charging code can encounter a charge size that is bigger than a
regular page in two situations: one is a batched charge to fill the
per-cpu stocks, the other is a huge page charge.

This code is distributed over two functions, however, and only the outer
one is aware of huge pages.  In case the charging fails, the inner
function will tell the outer function to retry if the charge size is
bigger than regular pages--assuming batched charging is the only case.
And the outer function will retry forever charging a huge page.

This patch makes sure the inner function can distinguish between batch
charging and a single huge page charge.  It will only signal another
attempt if batch charging failed, and go into regular reclaim when it is
called on behalf of a huge page.
Signed-off-by: NJohannes Weiner <hannes@cmpxchg.org>
Acked-by: NKAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Reviewed-by: NMinchan Kim <minchan.kim@gmail.com>
Cc: Balbir Singh <balbir@linux.vnet.ibm.com>
Cc: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

When a tail page of THP is poisoned, memory-failure will do nothing except
setting PG_hwpoison, while the expected behavior is that the process, who
is using the poisoned tail page, should be killed.

The above problem is caused by lru check of the poisoned tail page of THP.
Because PG_lru flag is only set on the head page of THP, the check always
consider the poisoned tail page as NON lru page.

So the lru check for the tail page of THP should be avoided, as like as
hugetlb.

This patch adds !PageTransCompound() before lru check for THP, because of
the check (!PageHuge() && !PageTransCompound()) the whole branch could be
optimized away at build time when both hugetlbfs and THP are set with "N"
(or in archs not supporting either of those).

[akpm@linux-foundation.org: fix unrelated typo in shake_page() comment]
Signed-off-by: NJin Dongming <jin.dongming@np.css.fujitsu.com>
Reviewed-by: NHidetoshi Seto <seto.hidetoshi@jp.fujitsu.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Andi Kleen <andi@firstfloor.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

When the tail page of THP is poisoned, the head page will be poisoned too.
 And the wrong address, address of head page, will be sent with sigbus
always.

So when the poisoned page is used by Guest OS which is running on KVM,
after the address changing(hva->gpa) by qemu, the unexpected process on
Guest OS will be killed by sigbus.

What we expected is that the process using the poisoned tail page could be
killed on Guest OS, but not that the process using the healthy head page
is killed.

Since it is not good to poison the healthy page, avoid poisoning other
than the page which is really poisoned.
  (While we poison all pages in a huge page in case of hugetlb,
   we can do this for THP thanks to split_huge_page().)

Here we fix two parts:
  1. Isolate the poisoned page only to make sure
     the reported address is the address of poisoned page.
  2. make the poisoned page work as the poisoned regular page.

[akpm@linux-foundation.org: fix spello in comment]
Signed-off-by: NJin Dongming <jin.dongming@np.css.fujitsu.com>
Reviewed-by: NHidetoshi Seto <seto.hidetoshi@jp.fujitsu.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Andi Kleen <andi@firstfloor.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The poisoned THP is now split with split_huge_page() in
collect_procs_anon().  If kmalloc() is failed in collect_procs(),
split_huge_page() could not be called.  And the work after
split_huge_page() for collecting the processes using poisoned page will
not be done, too.  So the processes using the poisoned page could not be
killed.

The condition becomes worse when CONFIG_DEBUG_VM == "Y".  Because the
poisoned THP could not be split, system panic will be caused by
VM_BUG_ON(PageTransHuge(page)) in try_to_unmap().

This patch does:
  1. move split_huge_page() to the place before collect_procs().
     This can be sure the failure of splitting THP is caused by itself.
  2. when splitting THP is failed, stop the operations after it.
     This can avoid unexpected system panic or non sense works.

[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: NJin Dongming <jin.dongming@np.css.fujitsu.com>
Reviewed-by: NHidetoshi Seto <seto.hidetoshi@jp.fujitsu.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Andi Kleen <andi@firstfloor.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The support@simtec.co.uk address is for direct customer support only, the
EB2410ITX and EB110ATX entries should direct to the Simtec Linux Team
address of linux@simtec.co.uk

Also add correct email address for Vincent Sanders

[akpm@linux-foundation.org: fix Vincent's address]
Signed-off-by: NBen Dooks <ben-linux@fluff.org>
Cc: Vincent Sanders <vince@simtec.co.uk>
Cc: Simtec Support <support@simtec.co.uk>
Cc: Simtec Linux Team <linux@simtec.co.uk>
Cc: Jack Stone <jwjstone@fastmail.fm>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Add the correct files for the Simtec BAST machine, ensuring the IDE and
IRQ routing are added, and move to the machine specific file instead of
trying to catch all of arch/arm/mach-s3c2410
Signed-off-by: NBen Dooks <ben-linux@fluff.org>
Cc: Simtec Linux Team <linux@simtec.co.uk>
Cc: Simtec Support <support@simtec.co.uk>
Cc: Jack Stone <jwjstone@fastmail.fm>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

There are currently two entries under the "SIMTEC EB2410ITX (BAST)"
machine entry for drivers/*/*s3c2410*, which is catching everything
s3c2410 driver related.

This entry is for a specific S3C2410 based machine, so move these two file
entries to the "ARM/SAMSUNG ARM ARCHITECTURES" entry, where it will reach
a wider audience of interested parties.
Signed-off-by: NBen Dooks <ben-linux@fluff.org>
Cc: Simtec Linux Team <linux@simtec.co.uk>
Acked-by: NKukjin Kim <kgene.kim@samsung.com>
Cc: Jack Stone <jwjstone@fastmail.fm>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

commit 95aac7b1 ("epoll: make epoll_wait() use the hrtimer range
feature") added a performance regression because it uses timespec_add_ns()
with potential very large 'ns' values.

[akpm@linux-foundation.org: s/epoll_set_mstimeout/ep_set_mstimeout/, per Davide]
Reported-by: NSimon Kirby <sim@hostway.ca>
Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com>
Cc: Shawn Bohrer <shawn.bohrer@gmail.com>
Acked-by: NDavide Libenzi <davidel@xmailserver.org>
Cc: <stable@kernel.org>		[2.6.37.x]
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

If migrate_huge_page by memory-failure fails , it calls put_page in itself
to decrease page reference and caller of migrate_huge_page also calls
putback_lru_pages.  It can do double free of page so it can make page
corruption on page holder.

In addtion, clean of pages on caller is consistent behavior with
migrate_pages by cf608ac1 ("mm: compaction: fix COMPACTPAGEFAILED
counting").
Signed-off-by: NMinchan Kim <minchan.kim@gmail.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Mel Gorman <mel@csn.ul.ie>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

In some cases migrate_pages could return zero while still leaving a few
pages in the pagelist (and some caller wouldn't notice it has to call
putback_lru_pages after commit cf608ac1 ("mm: compaction: fix
COMPACTPAGEFAILED counting")).

Add one missing putback_lru_pages not added by commit cf608ac1 ("mm:
compaction: fix COMPACTPAGEFAILED counting").
Signed-off-by: NAndrea Arcangeli <aarcange@redhat.com>
Signed-off-by: NMinchan Kim <minchan.kim@gmail.com>
Reviewed-by: NMinchan Kim <minchan.kim@gmail.com>
Cc: Christoph Lameter <cl@linux.com>
Acked-by: NMel Gorman <mel@csn.ul.ie>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

noswapaccount couldn't be used to control memsw for both on/off cases so
we have added swapaccount[=0|1] parameter.  This way we can turn the
feature in two ways noswapaccount resp.  swapaccount=0.  We have kept the
original noswapaccount but I think we should remove it after some time as
it just makes more command line parameters without any advantages and also
the code to handle parameters is uglier if we want both parameters.
Signed-off-by: NMichal Hocko <mhocko@suse.cz>
Requested-by: NKAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Acked-by: NKAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

__setup based kernel command line parameters handlers which are handled in
obsolete_checksetup are provided with the parameter value including =
(more precisely everything right after the parameter name).

This means that the current implementation of swapaccount[=1|0] doesn't
work at all because if there is a value for the parameter then we are
testing for "0" resp.  "1" but we are getting "=0" resp.  "=1" and if
there is no parameter value we are getting an empty string rather than
NULL.

The original noswapccount parameter, which doesn't care about the value,
works correctly.
Signed-off-by: NMichal Hocko <mhocko@suse.cz>
Acked-by: NKAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Cc: <stable@kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

move_native_irq() masks and unmasks the interrupt line
unconditionally, but the interrupt line might be masked due to a
threaded oneshot handler in progress. Unmasking the line in that case
can lead to interrupt storms. Observed on PREEMPT_RT.

Originally-from: Ingo Molnar <mingo@elte.hu>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Cc: stable@kernel.org

* 'next' of git://git.monstr.eu/linux-2.6-microblaze:
  microblaze: Fix ASM optimized code for LE
  microblaze: Fix unaligned issue on MMU system with BS=0 DIV=1
  microblaze: Fix DTB passing from bootloader

* git://git.kernel.org/pub/scm/linux/kernel/git/sfrench/cifs-2.6:
  cifs: fix length checks in checkSMB
  [CIFS] Update cifs minor version
  cifs: No need to check crypto blockcipher allocation
  cifs: clean up some compiler warnings
  cifs: make CIFS depend on CRYPTO_MD4
  cifs: force a reconnect if there are too many MIDs in flight
  cifs: don't pop a printk when sending on a socket is interrupted
  cifs: simplify SMB header check routine
  cifs: send an NT_CANCEL request when a process is signalled
  cifs: handle cancelled requests better
  cifs: fix two compiler warning about uninitialized vars

As Tao Ma noticed, change 5ecfda04 breaks blktrace. This is because
blktrace mmaps a file with PROT_WRITE permissions but without PROT_READ,
so my attempt to not unnecessarity break COW during mlock ended up
causing mlock to fail with a permission problem.

I am proposing to let mlock ignore vma protection in all cases except
PROT_NONE. In particular, mlock should not fail for PROT_WRITE regions
(as in the blktrace case, which broke at 5ecfda04) or for PROT_EXEC
regions (which seem to me like they were always broken).
Signed-off-by: NMichel Lespinasse <walken@google.com>
Acked-by: NRik van Riel <riel@redhat.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The comments under "config STUB_POULSBO" are close to correct,
but they are not being followed.  This patch updates them to reflect
the requirements for THERMAL.

This build error is caused by STUB_POULSBO selecting ACPI_VIDEO
when ACPI_VIDEO's config requirements are not met.

  ERROR: "thermal_cooling_device_register" [drivers/acpi/video.ko] undefined!
  ERROR: "thermal_cooling_device_unregister" [drivers/acpi/video.ko] undefined!
Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Version 15 of schedstats was introduced in:

   67aa0f76: sched: remove unused fields from struct rq

and removed three unused counters in sched_yield(). Update
the documentation.
Signed-off-by: NJavi Merino <cibervicho@gmail.com>
Cc: henrix@sapo.pt
Cc: rdunlap@xenotime.net
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
LKML-Reference: <1296515496-8229-1-git-send-email-cibervicho@gmail.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>