Convert the r8a66597-hcd driver to use the on_chip flag
from platform data to enable on chip behaviour instead
of relying on CONFIG_SUPERH_ON_CHIP_R8A66597 ugliness.

This makes the code cleaner and also allows us to support
both external and internal r8a66597 with the same kernel.

It also makes the Kconfig part more future proof since
we with this patch can add support for new processors
with on-chip r8a66597 without modifying the Kconfig.
Signed-off-by: NMagnus Damm <damm@igel.co.jp>
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>

Convert the r8a66597-hcd driver to dev_pm_ops. This makes
the driver a good PM citizen and removes a warning printout.
Signed-off-by: NMagnus Damm <damm@igel.co.jp>
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>

This patch adds hwblk support for the sh7723 processor.
Signed-off-by: NMagnus Damm <damm@igel.co.jp>
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>

Extend the SuperH hwblk code to support more than one counter.
Contains ground work for the future Runtime PM implementation.
Signed-off-by: NMagnus Damm <damm@igel.co.jp>
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>

* 'drm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6:
  drm: Move a dereference below a NULL test
  fb/intelfb: conflict with DRM_I915 and hide by default
  drm/ttm: fix misplaced parentheses
  drm/via: Fix vblank IRQ on VIA hardware.
  drm: drm_gem, check kzalloc retval
  drm: drm_debugfs, check kmalloc retval
  drm/radeon: add some missing pci ids

The BSS section macros in vmlinux.lds.h currently place the .sbss
input section outside the bounds of [__bss_start, __bss_end].  On all
architectures except for microblaze that handle both .sbss and
__bss_start/__bss_end, this is wrong: the .sbss input section is
within the range [__bss_start, __bss_end].  Relatedly, the example
code at the top of the file actually has __bss_start/__bss_end defined
twice; I believe the right fix here is to define them in the
BSS_SECTION macro but not in the BSS macro.

Another problem with the current macros is that several
architectures have an ALIGN(4) or some other small number just before
__bss_stop in their linker scripts.  The BSS_SECTION macro currently
hardcodes this to 4; while it should really be an argument.  It also
ignores its sbss_align argument; fix that.

mn10300 is the only user at present of any of the macros touched by
this patch.  It looks like mn10300 actually was incorrectly converted
to use the new BSS() macro (the alignment of 4 prior to conversion was
a __bss_stop alignment, but the argument to the BSS macro is a start
alignment).  So fix this as well.

I'd like acks from Sam and David on this one.  Also CCing Paul, since
he has a patch from me which will need to be updated to use
BSS_SECTION(0, PAGE_SIZE, 4) once this gets merged.
Signed-off-by: NTim Abbott <tabbott@ksplice.com>
Cc: Paul Mundt <lethal@linux-sh.org>
Cc: David Howells <dhowells@redhat.com>
Signed-off-by: NSam Ravnborg <sam@ravnborg.org>

This is needed on non ncurses based implementation to get a properly
initialized `stdscr' in main().

Cc: Roman Zippel <zippel@linux-m68k.org>
Signed-off-by: NSam Ravnborg <sam@ravnborg.org>

Fix build on non GNU based platforms.

Cc: Roman Zippel <zippel@linux-m68k.org>
Signed-off-by: NSam Ravnborg <sam@ravnborg.org>

bash versus dash and posh disagree on expanding $@ within double quotes:
export x="$@"
see http://bugs.debian.org/381091 for details
just use the arglist with $*.

dpkg: error processing linux-image-2.6.31-rc1_2.6.31-rc1-18_i386.deb (--install):
 subprocess pre-installation script returned error exit status 2
export: 6: 2.6.31-rc1-18: bad variable name
fixes http://bugzilla.kernel.org/show_bug.cgi?id=13567

seen on Ubuntu as there dash is the default sh,
versus bash on Debian.
Reported-by: NPauli <suokkos@gmail.com>
Cc: Frans Pop <elendil@planet.nl>
Signed-off-by: Nmaximilian attems <max@stro.at>
Acked-By: NAndres Salomon <dilinger@collabora.co.uk>

* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/fyu/linux-2.6:
  Revert "Neither asm/types.h nor linux/types.h is required for arch/ia64/include/asm/fpu.h"
  Add dma_debug_init() for ia64
  Fix ia64 compilation IS_ERR and PTE_ERR errors.

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6:
  x86/pci: insert ioapic resource before assigning unassigned resources

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6:
  ALSA: riptide -  proper handling of pci_register_driver for joystick
  sound: usb-audio: add workaround for Blue Microphones devices
  ALSA: hda_intel: more strict alc880_parse_auto_config dig_nid checking
  ASoC: Fix NULL pointer dereference in __pxa2xx_pcm_hw_free

* git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6-for-linus:
  virtio_net: Sync header with qemu
  virtio-pci: correctly unregister root device on error
  virtio_blk: ioctl return value fix
  virtio_blk: don't bounce highmem requests
  lguest: restrict CPUID to avoid perf counter wrmsr
  lguest: remove unnecessary forward struct declaration
  lguest: fix journey

Merge branch 'tracing-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'tracing-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  tracing/function: Fix the return value of ftrace_trace_onoff_callback()

Whoops.. fortunately not many people use this yet.
Signed-off-by: NAlan Cox <alan@linux.intel.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

asm/fpu.h uses the __IA64_UL macro which is declared in asm/types.h, so
this include is really required. Without it, GNU libc fails to build.

This reverts commit 2678c07b.
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>
Acked-by: NFenghua Yu <fenghua.yu@intel.com>

The commit 99162195 was supposed to
add CONFIG_DMA_API_DEBUG support to IA64 however I forgot to add
dma_debug_init().
Signed-off-by: Nfujita <fujita@tulip.osrg.net>
Acked-by: NFenghua Yu <fenghua.yu@intel.com>

When building ia64 kernel with CONFIG_XEN_SYS_HYPERVISOR, compiler reports
errors:

drivers/xen/sys-hypervisor.c: In function ‘uuid_show’:
drivers/xen/sys-hypervisor.c:125: error: implicit declaration of function ‘IS_ERR’
drivers/xen/sys-hypervisor.c:126: error: implicit declaration of function ‘PTR_ERR’

This patch fixes the errors.
Signed-off-by: NFenghua Yu <fenghua.yu@intel.com>
Acked-by: NIsaku Yamahata <yamahata@valinux.co.jp>

Qemu added support for a few extra RX modes that Linux doesn't
currently make use of.  Sync the headers to maintain consistency.
Signed-off-by: NAlex Williamson <alex.williamson@hp.com>
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>

If pci_register_driver() fails we're incorrectly unregistering the root
device with device_unregister() rather than root_device_unregister().
Reported-by: NDon Zickus <dzickus@redhat.com>
Signed-off-by: NMark McLoughlin <markmc@redhat.com>
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>

Block driver ioctl methods must return ENOTTY and not -ENOIOCTLCMD if
they expect the block layer to handle generic ioctls.

This triggered a BLKROSET failure in xfsqa #200.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>

By default a block driver bounces highmem requests, but virtio-blk is
perfectly fine with any request that fit into it's 64 bit addressing scheme,
mapped in the kernel virtual space or not.

Besides improving performance on highmem systems this also makes the
reproducible oops in __bounce_end_io go away (but hiding the real cause).
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>

Avoid the following:
[    0.012093] WARNING: at arch/x86/kernel/apic/apic.c:249 native_apic_write_dummy+0x2f/0x40()

Rather than chase each new cpuid-detected feature, just lie about the highest
valid CPUID so this code is never run.
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>

While fixing lg.h to drop the fwd declaration, I noticed
there's another one ;)
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>

fix: "make Guest" was complaining about duplicated G:032
Signed-off-by: NMatias Zabaljauregui <zabaljauregui@gmail.com>
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>

ftrace_trace_onoff_callback() will return an error even if we do the
right operation, for example:

 # echo _spin_*:traceon:10 > set_ftrace_filter
 -bash: echo: write error: Invalid argument
 # cat set_ftrace_filter
 #### all functions enabled ####
 _spin_trylock_bh:traceon:count=10
 _spin_unlock_irq:traceon:count=10
 _spin_unlock_bh:traceon:count=10
 _spin_lock_irq:traceon:count=10
 _spin_unlock:traceon:count=10
 _spin_trylock:traceon:count=10
 _spin_unlock_irqrestore:traceon:count=10
 _spin_lock_irqsave:traceon:count=10
 _spin_lock_bh:traceon:count=10
 _spin_lock:traceon:count=10

We want to set _spin_*:traceon:10 to set_ftrace_filter, it complains
with "Invalid argument", but the operation is successful.

This is because ftrace_process_regex() returns the number of functions that
matched the pattern. If the number is not 0, this value is returned
by ftrace_regex_write() whereas we want to return the number of bytes
virtually written.
Also the file offset pointer is not updated in this case.

If the number of matched functions is lower than the number of bytes written
by the user, this results to a reprocessing of the string given by the user with
a lower size, leading to a malformed ftrace regex and then a -EINVAL returned.

So, this patch fixes it by returning 0 if no error occured.
The fix also applies on 2.6.30
Signed-off-by: NXiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Reviewed-by: NLi Zefan <lizf@cn.fujitsu.com>
Cc: stable@kernel.org
Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com>

Merge branch 'sched-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/peterz/linux-2.6-sched

* 'sched-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/peterz/linux-2.6-sched:
  sched: Fix bug in SCHED_IDLE interaction with group scheduling
  sched: Fix rt_rq->pushable_tasks initialization in init_rt_rq()
  sched: Reset sched stats on fork()
  sched_rt: Fix overload bug on rt group scheduling
  sched: Documentation/sched-rt-group: Fix style issues & bump version

Merge branch 'timers-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'timers-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  timer stats: fix quick check optimization

* 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc:
  powerpc: Fix another bug in move of altivec code to vector.S
  powerpc: Fix booke user_disable_single_step()

If a tty in N_TTY mode with echo enabled manages to get itself into a state
where
	- echo characters are pending
	- FASYNC is enabled
	- tty_write_wakeup is called from either
		- a device write path (pty)
		- an IRQ (serial)

then it either deadlocks or explodes taking a mutex in the IRQ path.

On the serial side it is almost impossible to reproduce because you have to
go from a full serial port to a near empty one with echo characters
pending. The pty case happens to have become possible to trigger using
emacs and ptys, the pty changes having created a scenario which shows up
this bug.

The code path is

	n_tty:process_echoes() (takes mutex)
	tty_io:tty_put_char()
	pty:pty_write  (or serial paths)
	tty_wakeup     (from pty_write or serial IRQ)
	n_tty_write_wakeup()
	process_echoes()
	*KABOOM*
Signed-off-by: NAlan Cox <alan@linux.intel.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Don't forget to drop a tty refererence on fail paths in
receive_data().
Signed-off-by: NJiri Slaby <jirislaby@gmail.com>
Signed-off-by: NAlan Cox <alan@linux.intel.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Bootmem is not used for the vt screen buffer anymore as slab is now
available at the time the console is initialized.

Get rid of the now superfluous distinction between slab and bootmem,
it's always slab.

This also fixes a kmalloc leak which Catalin described thusly:

Commit a5f4f52e ("vt: use kzalloc() instead of the bootmem allocator")
replaced the alloc_bootmem() with kzalloc() but didn't set vc_kmalloced to
1 and the memory block is later leaked.  The corresponding kmemleak trace:

unreferenced object 0xdf828000 (size 8192):
  comm "swapper", pid 0, jiffies 4294937296
  backtrace:
    [<c006d473>] __save_stack_trace+0x17/0x1c
    [<c000d869>] log_early+0x55/0x84
    [<c01cfa4b>] kmemleak_alloc+0x33/0x3c
    [<c006c013>] __kmalloc+0xd7/0xe4
    [<c00108c7>] con_init+0xbf/0x1b8
    [<c0010149>] console_init+0x11/0x20
    [<c0008797>] start_kernel+0x137/0x1e4
Signed-off-by: NJohannes Weiner <hannes@cmpxchg.org>
Reviewed-by: NPekka Enberg <penberg@cs.helsinki.fi>
Tested-by: NCatalin Marinas <catalin.marinas@arm.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NAlan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

dcb314@hotmail.com notes that this memset has its args reversed.

It's unneeded anyway, so remove it.

Addresses http://bugzilla.kernel.org/show_bug.cgi?id=13587Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NAlan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

msm_serial_driver is registered using platform_driver_probe which takes
care for the probe function itself.  So don't pass it in the driver
struct, too.
Signed-off-by: NUwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: NAlan Cox <alan@linux.intel.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

We can get a situation where a hangup occurs during or after a close. In
that case the ldisc gets disposed of by the close and the hangup then
explodes.
Signed-off-by: NAlan Cox <alan@linux.intel.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Turning on this flag could prevent the compiler from optimising away
some "useless" checks for null pointers.  Such bugs can sometimes become
exploitable at compile time because of the -O2 optimisation.

See http://gcc.gnu.org/onlinedocs/gcc-4.1.2/gcc/Optimize-Options.html

An example that clearly shows this 'problem' is commit 6bf67672.

 static void __devexit agnx_pci_remove(struct pci_dev *pdev)
 {
     struct ieee80211_hw *dev = pci_get_drvdata(pdev);
-    struct agnx_priv *priv = dev->priv;
+    struct agnx_priv *priv;
     AGNX_TRACE;

     if (!dev)
         return;
+    priv = dev->priv;

By reverting this patch, and compile it with and without
-fno-delete-null-pointer-checks flag, we can see that the check for dev
is compiled away.

    call    printk  #
-   testq   %r12, %r12  # dev
-   je  .L94    #,
    movq    %r12, %rdi  # dev,

Clearly the 'fix' is to stop using dev before it is tested, but building
with -fno-delete-null-pointer-checks flag at least makes it harder to
abuse.
Signed-off-by: NEugene Teo <eugeneteo@kernel.sg>
Acked-by: NEric Paris <eparis@redhat.com>
Acked-by: NWang Cong <amwang@redhat.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This reverts commit a6540f73, as
requested by Alan:

  "... as it was wrong, the pty code is now fixed and the fact this
   isn't reverted is breaking pptp setups."
Requested-by: NAlan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

* fix/usb-audio:
  sound: usb-audio: add workaround for Blue Microphones devices