If the user did setup polling in the driver we should not require
another know in the block layer to enable it.
Reviewed-by: NSagi Grimberg <sagi@grimberg.me>
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

This avoids having to have differnet mq_ops for different setups
with or without poll queues.
Reviewed-by: NSagi Grimberg <sagi@grimberg.me>
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

This was intended to support users like nvme multipath, but is just
getting in the way and adding another indirect call.
Reviewed-by: NSagi Grimberg <sagi@grimberg.me>
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Having another indirect all in the fast path doesn't really help
in our post-spectre world.  Also having too many queue type is just
going to create confusion, so I'd rather manage them centrally.

Note that the queue type naming and ordering changes a bit - the
first index now is the default queue for everything not explicitly
marked, the optional ones are read and poll queues.
Reviewed-by: NSagi Grimberg <sagi@grimberg.me>
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

We only need the request fields and the end_io time if we have
stats enabled, or if we have a scheduler attached as those may
use it for completion time stats.
Reviewed-by: NOmar Sandoval <osandov@fb.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

I ran into a bug where after hibernation due to incompatible
backends, the block driver returned BLK_STS_NOTSUPP, with the
current message it's hard to find out what the command flags
were. Adding req->cmd_flags help make the problem easier to
diagnose.
Reviewed-by: NEduardo Valentin <eduval@amazon.com>
Reviewed-by: NMing Lei <ming.lei@redhat.com>
Signed-off-by: NBalbir Singh <sblbir@amzn.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Even if we have no waiters on any of the sbitmap_queue wait states, we
still have to loop every entry to check. We do this for every IO, so
the cost adds up.

Shift a bit of the cost to the slow path, when we actually have waiters.
Wrap prepare_to_wait_exclusive() and finish_wait(), so we can maintain
an internal count of how many are currently active. Then we can simply
check this count in sbq_wake_ptr() and not have to loop if we don't
have any sleepers.

Convert the two users of sbitmap with waiting, blk-mq-tag and iSCSI.
Reviewed-by: NOmar Sandoval <osandov@fb.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

There are actually two kinds of discard merge:

- one is the normal discard merge, just like normal read/write request,
and call it single-range discard

- another is the multi-range discard, queue_max_discard_segments(rq->q) > 1

For the former case, queue_max_discard_segments(rq->q) is 1, and we
should handle this kind of discard merge like the normal read/write
request.

This patch fixes the following kernel panic issue[1], which is caused by
not removing the single-range discard request from elevator queue.

Guangwu has one raid discard test case, in which this issue is a bit
easier to trigger, and I verified that this patch can fix the kernel
panic issue in Guangwu's test case.

[1] kernel panic log from Jens's report

 BUG: unable to handle kernel NULL pointer dereference at 0000000000000148
 PGD 0 P4D 0.
 Oops: 0000 [#1] SMP PTI
 CPU: 37 PID: 763 Comm: kworker/37:1H Not tainted \
4.20.0-rc3-00649-ge64d9a554a91-dirty #14  Hardware name: Wiwynn \
Leopard-Orv2/Leopard-DDR BW, BIOS LBM08   03/03/2017       Workqueue: kblockd \
blk_mq_run_work_fn                                            RIP: \
0010:blk_mq_get_driver_tag+0x81/0x120                                       Code: 24 \
10 48 89 7c 24 20 74 21 83 fa ff 0f 95 c0 48 8b 4c 24 28 65 48 33 0c 25 28 00 00 00 \
0f 85 96 00 00 00 48 83 c4 30 5b 5d c3 <48> 8b 87 48 01 00 00 8b 40 04 39 43 20 72 37 \
f6 87 b0 00 00 00 02  RSP: 0018:ffffc90004aabd30 EFLAGS: 00010246                     \
  RAX: 0000000000000003 RBX: ffff888465ea1300 RCX: ffffc90004aabde8
 RDX: 00000000ffffffff RSI: ffffc90004aabde8 RDI: 0000000000000000
 RBP: 0000000000000000 R08: ffff888465ea1348 R09: 0000000000000000
 R10: 0000000000001000 R11: 00000000ffffffff R12: ffff888465ea1300
 R13: 0000000000000000 R14: ffff888465ea1348 R15: ffff888465d10000
 FS:  0000000000000000(0000) GS:ffff88846f9c0000(0000) knlGS:0000000000000000
 CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
 CR2: 0000000000000148 CR3: 000000000220a003 CR4: 00000000003606e0
 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
 Call Trace:
  blk_mq_dispatch_rq_list+0xec/0x480
  ? elv_rb_del+0x11/0x30
  blk_mq_do_dispatch_sched+0x6e/0xf0
  blk_mq_sched_dispatch_requests+0xfa/0x170
  __blk_mq_run_hw_queue+0x5f/0xe0
  process_one_work+0x154/0x350
  worker_thread+0x46/0x3c0
  kthread+0xf5/0x130
  ? process_one_work+0x350/0x350
  ? kthread_destroy_worker+0x50/0x50
  ret_from_fork+0x1f/0x30
 Modules linked in: sb_edac x86_pkg_temp_thermal intel_powerclamp coretemp kvm_intel \
kvm switchtec irqbypass iTCO_wdt iTCO_vendor_support efivars cdc_ether usbnet mii \
cdc_acm i2c_i801 lpc_ich mfd_core ipmi_si ipmi_devintf ipmi_msghandler acpi_cpufreq \
button sch_fq_codel nfsd nfs_acl lockd grace auth_rpcgss oid_registry sunrpc nvme \
nvme_core fuse sg loop efivarfs autofs4  CR2: 0000000000000148                        \

 ---[ end trace 340a1fb996df1b9b ]---
 RIP: 0010:blk_mq_get_driver_tag+0x81/0x120
 Code: 24 10 48 89 7c 24 20 74 21 83 fa ff 0f 95 c0 48 8b 4c 24 28 65 48 33 0c 25 28 \
00 00 00 0f 85 96 00 00 00 48 83 c4 30 5b 5d c3 <48> 8b 87 48 01 00 00 8b 40 04 39 43 \
20 72 37 f6 87 b0 00 00 00 02

Fixes: 445251d0 ("blk-mq: fix discard merge with scheduler attached")
Reported-by: NJens Axboe <axboe@kernel.dk>
Cc: Guangwu Zhang <guazhang@redhat.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Jianchao Wang <jianchao.w.wang@oracle.com>
Signed-off-by: NMing Lei <ming.lei@redhat.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

If we have that hook, we know the driver handles bd->last == true in
a smart fashion. If it does, even for multiple hardware queues, it's
a good idea to flush batches of requests to the device, if we have
batches of requests from the submitter.
Reviewed-by: NMing Lei <ming.lei@redhat.com>
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

If we are issuing a list of requests, we know if we're at the last one.
If we fail issuing, ensure that we call ->commits_rqs() to flush any
potential previous requests.
Reviewed-by: NOmar Sandoval <osandov@fb.com>
Reviewed-by: NMing Lei <ming.lei@redhat.com>
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

blk-mq passes information to the hardware about any given request being
the last that we will issue in this sequence. The point is that hardware
can defer costly doorbell type writes to the last request. But if we run
into errors issuing a sequence of requests, we may never send the request
with bd->last == true set. For that case, we need a hook that tells the
hardware that nothing else is coming right now.

For failures returned by the drivers ->queue_rq() hook, the driver is
responsible for flushing pending requests, if it uses bd->last to
optimize that part. This works like before, no changes there.
Reviewed-by: NOmar Sandoval <osandov@fb.com>
Reviewed-by: NMing Lei <ming.lei@redhat.com>
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Only do it if we have requests for multiple queues in the same
plug.
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

I recently found some code which called blk_mq_free_map_and_requests()
with a NULL set->tags pointer.  I fixed the caller, but it seems like a
good idea to add a NULL check here as well.  Now we can call:

	blk_mq_free_tag_set(set);
	blk_mq_free_tag_set(set);

twice in a row and it's harmless.
Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Give a interface to adjust io timeout(ms) by device.
Signed-off-by: NWeiping Zhang <zhangweiping@didiglobal.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

We recently got a stack by syzkaller like this:

BUG: sleeping function called from invalid context at mm/slab.h:361
in_atomic(): 1, irqs_disabled(): 0, pid: 6644, name: blkid
INFO: lockdep is turned off.
CPU: 1 PID: 6644 Comm: blkid Not tainted 4.4.163-514.55.6.9.x86_64+ #76
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014
 0000000000000000 5ba6a6b879e50c00 ffff8801f6b07b10 ffffffff81cb2194
 0000000041b58ab3 ffffffff833c7745 ffffffff81cb2080 5ba6a6b879e50c00
 0000000000000000 0000000000000001 0000000000000004 0000000000000000
Call Trace:
 <IRQ>  [<ffffffff81cb2194>] __dump_stack lib/dump_stack.c:15 [inline]
 <IRQ>  [<ffffffff81cb2194>] dump_stack+0x114/0x1a0 lib/dump_stack.c:51
 [<ffffffff8129a981>] ___might_sleep+0x291/0x490 kernel/sched/core.c:7675
 [<ffffffff8129ac33>] __might_sleep+0xb3/0x270 kernel/sched/core.c:7637
 [<ffffffff81794c13>] slab_pre_alloc_hook mm/slab.h:361 [inline]
 [<ffffffff81794c13>] slab_alloc_node mm/slub.c:2610 [inline]
 [<ffffffff81794c13>] slab_alloc mm/slub.c:2692 [inline]
 [<ffffffff81794c13>] kmem_cache_alloc_trace+0x2c3/0x5c0 mm/slub.c:2709
 [<ffffffff81cbe9a7>] kmalloc include/linux/slab.h:479 [inline]
 [<ffffffff81cbe9a7>] kzalloc include/linux/slab.h:623 [inline]
 [<ffffffff81cbe9a7>] kobject_uevent_env+0x2c7/0x1150 lib/kobject_uevent.c:227
 [<ffffffff81cbf84f>] kobject_uevent+0x1f/0x30 lib/kobject_uevent.c:374
 [<ffffffff81cbb5b9>] kobject_cleanup lib/kobject.c:633 [inline]
 [<ffffffff81cbb5b9>] kobject_release+0x229/0x440 lib/kobject.c:675
 [<ffffffff81cbb0a2>] kref_sub include/linux/kref.h:73 [inline]
 [<ffffffff81cbb0a2>] kref_put include/linux/kref.h:98 [inline]
 [<ffffffff81cbb0a2>] kobject_put+0x72/0xd0 lib/kobject.c:692
 [<ffffffff8216f095>] put_device+0x25/0x30 drivers/base/core.c:1237
 [<ffffffff81c4cc34>] delete_partition_rcu_cb+0x1d4/0x2f0 block/partition-generic.c:232
 [<ffffffff813c08bc>] __rcu_reclaim kernel/rcu/rcu.h:118 [inline]
 [<ffffffff813c08bc>] rcu_do_batch kernel/rcu/tree.c:2705 [inline]
 [<ffffffff813c08bc>] invoke_rcu_callbacks kernel/rcu/tree.c:2973 [inline]
 [<ffffffff813c08bc>] __rcu_process_callbacks kernel/rcu/tree.c:2940 [inline]
 [<ffffffff813c08bc>] rcu_process_callbacks+0x59c/0x1c70 kernel/rcu/tree.c:2957
 [<ffffffff8120f509>] __do_softirq+0x299/0xe20 kernel/softirq.c:273
 [<ffffffff81210496>] invoke_softirq kernel/softirq.c:350 [inline]
 [<ffffffff81210496>] irq_exit+0x216/0x2c0 kernel/softirq.c:391
 [<ffffffff82c2cd7b>] exiting_irq arch/x86/include/asm/apic.h:652 [inline]
 [<ffffffff82c2cd7b>] smp_apic_timer_interrupt+0x8b/0xc0 arch/x86/kernel/apic/apic.c:926
 [<ffffffff82c2bc25>] apic_timer_interrupt+0xa5/0xb0 arch/x86/entry/entry_64.S:746
 <EOI>  [<ffffffff814cbf40>] ? audit_kill_trees+0x180/0x180
 [<ffffffff8187d2f7>] fd_install+0x57/0x80 fs/file.c:626
 [<ffffffff8180989e>] do_sys_open+0x45e/0x550 fs/open.c:1043
 [<ffffffff818099c2>] SYSC_open fs/open.c:1055 [inline]
 [<ffffffff818099c2>] SyS_open+0x32/0x40 fs/open.c:1050
 [<ffffffff82c299e1>] entry_SYSCALL_64_fastpath+0x1e/0x9a

In softirq context, we call rcu callback function delete_partition_rcu_cb(),
which may allocate memory by kzalloc with GFP_KERNEL flag. If the
allocation cannot be satisfied, it may sleep. However, That is not allowed
in softirq contex.

Although we found this problem on linux 4.4, the latest kernel version
seems to have this problem as well. And it is very similar to the
previous one:
	https://lkml.org/lkml/2018/7/9/391

Fix it by using RCU workqueue, which allows sleep.
Reviewed-by: NPaul E. McKenney <paulmck@linux.ibm.com>
Signed-off-by: NYufen Yu <yuyufen@huawei.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

If we yank a 'same_queue_rq' request off the plug list, we should
also decrement the cached request count.

Fixes: 5f0ed774 ("block: sum requests in the plug structure")
Signed-off-by: NJens Axboe <axboe@kernel.dk>

This isn't exactly the same as the previous count, as it includes
requests for all devices. But that really doesn't matter, if we have
more than the threshold (16) queued up, flush it. It's not worth it
to have an expensive list loop for this.
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

There are no more users relying on blk-mq request states to prevent
double completions, so replace the relatively expensive cmpxchg operation
with WRITE_ONCE.
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NKeith Busch <keith.busch@intel.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

A driver may have internal state to cleanup if we're pretending a request
didn't complete. Return 'false' if the command wasn't actually completed
due to the timeout error injection, and true otherwise.
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NKeith Busch <keith.busch@intel.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

It's pointless to do so, we are by definition on the CPU we want/need
to be, as that's the one waiting for a completion event.
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Right now we immediately bail if need_resched() is true, but
we need to do at least one loop in case we have entries waiting.
So just invert the need_resched() check, putting it at the
bottom of the loop.
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

blk_poll() has always kept spinning until it found an IO. This is
fine for SYNC polling, since we need to find one request we have
pending, but in preparation for ASYNC polling it can be beneficial
to just check if we have any entries available or not.

Existing callers are converted to pass in 'spin == true', to retain
the old behavior.
Signed-off-by: NJens Axboe <axboe@kernel.dk>

We always pass in -1 now and none of the callers use the tag value,
remove the parameter.
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

If we want to support async IO polling, then we have to allow finding
completions that aren't just for the one we are looking for. Always pass
in -1 to the mq_ops->poll() helper, and have that return how many events
were found in this poll loop.
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Even though .mq_kobj, ctx->kobj and q->kobj share same lifetime
from block layer's view, actually they don't because userspace may
grab one kobject anytime via sysfs.

This patch fixes the issue by the following approach:

1) introduce 'struct blk_mq_ctxs' for holding .mq_kobj and managing
all ctxs

2) free all allocated ctxs and the 'blk_mq_ctxs' instance in release
handler of .mq_kobj

3) grab one ref of .mq_kobj before initializing each ctx->kobj, so that
.mq_kobj is always released after all ctxs are freed.

This patch fixes kernel panic issue during booting when DEBUG_KOBJECT_RELEASE
is enabled.
Reported-by: NGuenter Roeck <linux@roeck-us.net>
Cc: "jianchao.wang" <jianchao.w.wang@oracle.com>
Tested-by: NGuenter Roeck <linux@roeck-us.net>
Reviewed-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NMing Lei <ming.lei@redhat.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

If the first request allocated and issued by a process is a passhthrough
request, we don't set up an IO context for it. Ensure that
blk_mq_sched_assign_ioc() ignores a NULL io_context.

Fixes: e2b3fa5a ("block: Remove bio->bi_ioc")
Reported-by: NMing Lei <ming.lei@redhat.com>
Tested-by: NMing Lei <ming.lei@redhat.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

For the synchronous I/O path case (read(), write() etc system calls), a
BIO I/O priority is not initialized until the execution of
blk_init_request_from_bio() when the BIO is submitted and a request
initialized for the BIO execution. This is due to the ki_ioprio field of
the struct kiocb defined on stack being always initialized to
IOPRIO_CLASS_NONE, regardless of the calling process I/O context ioprio
value set with ioprio_set(). This late initialization can result in the
BIO being merged to pending requests even when the I/O priorities
differ.

Fix this by initializing the ki_iopriority field of on stack struct
kiocb using the get_current_ioprio() helper, ensuring that all BIOs
allocated and submitted for the system call execution see the correct
intended I/O priority early. With this, since a BIO I/O priority is
always set to the intended effective value for both the sync and async
path, blk_init_request_from_bio() can be simplified.
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NAdam Manzanares <adam.manzanares@wdc.com>
Signed-off-by: NDamien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Growing in size a high priority request by merging it with a lower
priority BIO or request will increase the request execution time. This
is the opposite result of the desired effect of high I/O priorities,
namely getting low I/O latencies. Prevent merging of requests and BIOs
that have different I/O priorities to fix this.
Signed-off-by: NDamien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Define get_current_ioprio() as an inline helper to obtain the caller
I/O priority from its task I/O context. Use this helper in
blk_init_request_from_bio() to set a request ioprio.
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NJohannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: NDamien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

bio->bi_ioc is never set so always NULL. Remove references to it in
bio_disassociate_task() and in rq_ioc() and delete this field from
struct bio. With this change, rq_ioc() always returns
current->io_context without the need for a bio argument. Further
simplify the code and make it more readable by also removing this
helper, which also allows to simplify blk_mq_sched_assign_ioc() by
removing its bio argument.
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NJohannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: NAdam Manzanares <adam.manzanares@wdc.com>
Signed-off-by: NDamien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

We currently only really support sync poll, ie poll with 1 IO in flight.
This prepares us for supporting async poll.

Note that the returned value isn't necessarily 100% accurate. If poll
races with IRQ completion, we assume that the fact that the task is now
runnable means we found at least one entry. In reality it could be more
than 1, or not even 1. This is fine, the caller will just need to take
this into account.
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

For the core poll helper, the task state setting don't need to imply any
atomics, as it's the current task itself that is being modified and
we're not going to sleep.

For IRQ driven, the wakeup path have the necessary barriers to not need
us using the heavy handed version of the task state setting.
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Put the short code in the fast path, where we don't have any
functions attached to the queue. This minimizes the impact on
the hot path in the core code.

Cc: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Various spots check for q->mq_ops being non-NULL, but provide
a helper to do this instead.

Where the ->mq_ops != NULL check is redundant, remove it.

Since mq == rq-based now that legacy is gone, get rid of the
queue_is_rq_based() and just use queue_is_mq() everywhere.
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

This isn't unused, if BFQ is modular we get into trouble.

Fixes: b6676f65 ("block: remove a few unused exports")
Signed-off-by: NJens Axboe <axboe@kernel.dk>

With the legacy request path gone there is no good reason to keep
queue_lock as a pointer, we can always use the embedded lock now.
Reviewed-by: NHannes Reinecke <hare@suse.com>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

Fixed floppy and blk-cgroup missing conversions and half done edits.
Signed-off-by: NJens Axboe <axboe@kernel.dk>

With the legacy request path gone there is no real need to override the
queue_lock.
Reviewed-by: NHannes Reinecke <hare@suse.com>
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Reviewed-by: NHannes Reinecke <hare@suse.com>
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Use a goto label to merge two identical pieces of error handling code.
Reviewed-by: NHannes Reinecke <hare@suse.com>
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Reviewed-by: NHannes Reinecke <hare@suse.com>
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NJens Axboe <axboe@kernel.dk>