- 15 10月, 2012 32 次提交
-
-
由 Shawn Guo 提交于
Move imx debug-macro.S over to common debug macro directory. It removes the inclusion to hardware.h by hard-coding the physical address of uart port and copying IMX_IO_P2V from hardware.h. Since we will need a common solution, which might use a fixed virtual address for uart port across platforms, we make a copy of IMX_IO_P2V here as a temporary solution to enable low-level debug for imx multi-platform build. Signed-off-by: NShawn Guo <shawn.guo@linaro.org> Acked-by: NSascha Hauer <s.hauer@pengutronix.de> Acked-by: NArnd Bergmann <arnd@arndb.de>
-
由 Shawn Guo 提交于
It changes the driver to use platform_device_id rather than cpu_is_xxx to determine the controller type, and updates the platform code accordingly. As the result, mach/hardware.h inclusion gets removed from the driver. Signed-off-by: NShawn Guo <shawn.guo@linaro.org> Acked-by: NSascha Hauer <s.hauer@pengutronix.de> Acked-by: NArnd Bergmann <arnd@arndb.de> Cc: Florian Tobias Schandinat <FlorianSchandinat@gmx.de> Cc: linux-fbdev@vger.kernel.org
-
由 Shawn Guo 提交于
It changes the driver to use platform_device_id rather than cpu_is_xxx to determine the controller type, and updates the platform code accordingly. As the result, mach/hardware.h inclusion gets removed from the driver. Signed-off-by: NShawn Guo <shawn.guo@linaro.org> Acked-by: NSascha Hauer <s.hauer@pengutronix.de> Acked-by: NArnd Bergmann <arnd@arndb.de> Acked-by: NChris Ball <cjb@laptop.org> Tested-by: NJavier Martin <javier.martin@vista-silicon.com> Cc: linux-mmc@vger.kernel.org
-
由 Shawn Guo 提交于
It changes the driver to use platform_device_id rather than cpu_is_xxx to determine the controller type, and updates the platform code accordingly. As the result, mach/hardware.h inclusion gets removed from the driver. Signed-off-by: NShawn Guo <shawn.guo@linaro.org> Acked-by: NSascha Hauer <s.hauer@pengutronix.de> Acked-by: NArnd Bergmann <arnd@arndb.de> Acked-by: NGuennadi Liakhovetski <g.liakhovetski@gmx.de> Tested-by: NJavier Martin <javier.martin@vista-silicon.com> Cc: linux-media@vger.kernel.org
-
由 Shawn Guo 提交于
It changes the driver to use platform_device_id rather than cpu_is_xxx to determine the controller type, and updates the platform code accordingly. As the result, mach/hardware.h inclusion gets removed from the driver. Signed-off-by: NShawn Guo <shawn.guo@linaro.org> Signed-off-by: NSascha Hauer <s.hauer@pengutronix.de> Acked-by: NArnd Bergmann <arnd@arndb.de> Tested-by: NJavier Martin <javier.martin@vista-silicon.com> Cc: Vinod Koul <vinod.koul@linux.intel.com>
-
由 Shawn Guo 提交于
Retrieve MEM and IRQ from resources rather than directly using the value by including machine header. Signed-off-by: NShawn Guo <shawn.guo@linaro.org> Acked-by: NSascha Hauer <s.hauer@pengutronix.de> Acked-by: NArnd Bergmann <arnd@arndb.de> Cc: Vinod Koul <vinod.koul@linux.intel.com>
-
由 Shawn Guo 提交于
Use managed functions devm_kzalloc and devm_request_irq instead to make the error patch simpler. Signed-off-by: NShawn Guo <shawn.guo@linaro.org> Acked-by: NSascha Hauer <s.hauer@pengutronix.de> Acked-by: NArnd Bergmann <arnd@arndb.de> Cc: Vinod Koul <vinod.koul@linux.intel.com>
-
由 Shawn Guo 提交于
It changes the driver to use platform_device_id rather than cpu_is_xxx to determine the controller type, and updates the platform code accordingly. As the result, mach/hardware.h inclusion gets removed from the driver. Signed-off-by: NShawn Guo <shawn.guo@linaro.org> Acked-by: NSascha Hauer <s.hauer@pengutronix.de> Acked-by: NArnd Bergmann <arnd@arndb.de> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: rtc-linux@googlegroups.com
-
由 Shawn Guo 提交于
It changes the driver to use platform_device_id rather than cpu_is_xxx to determine the controller type, and updates the platform code accordingly. As the result, mach/hardware.h inclusion gets removed from the driver. Signed-off-by: NShawn Guo <shawn.guo@linaro.org> Acked-by: NSascha Hauer <s.hauer@pengutronix.de> Acked-by: NArnd Bergmann <arnd@arndb.de> Cc: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Cc: linux-mtd@lists.infradead.org
-
由 Shawn Guo 提交于
This is some amount of work left/forgot from device tree conversion. Instead of checking cpu_is_xxx to determine the controller type, the driver should use platform_device_id, which should match the device tree compatible string. The patch changes the driver to use platform_device_id rather than cpu_is_xxx to determine the controller type/version. It also updates the platform code and device tree source accordingly. As the result, mach/hardware.h inclusion gets removed from the driver. Signed-off-by: NShawn Guo <shawn.guo@linaro.org> Acked-by: NSascha Hauer <s.hauer@pengutronix.de> Acked-by: NArnd Bergmann <arnd@arndb.de> Cc: Wolfram Sang <w.sang@pengutronix.de> Cc: linux-i2c@vger.kernel.org
-
由 Shawn Guo 提交于
The inclusion of mach/hardware.h is not used by the driver at all. Remove it. Signed-off-by: NShawn Guo <shawn.guo@linaro.org> Acked-by: NSascha Hauer <s.hauer@pengutronix.de> Acked-by: NArnd Bergmann <arnd@arndb.de> Cc: Wim Van Sebroeck <wim@iguana.be> Cc: linux-watchdog@vger.kernel.org
-
由 Shawn Guo 提交于
The inclusion of mach/hardware.h is not used by the driver at all. Remove it. Signed-off-by: NShawn Guo <shawn.guo@linaro.org> Acked-by: NSascha Hauer <s.hauer@pengutronix.de> Acked-by: NArnd Bergmann <arnd@arndb.de> Cc: Florian Tobias Schandinat <FlorianSchandinat@gmx.de> Cc: linux-fbdev@vger.kernel.org
-
由 Shawn Guo 提交于
The inclusion of mach/hardware.h is not used by the driver at all. Remove it. Signed-off-by: NShawn Guo <shawn.guo@linaro.org> Acked-by: NSascha Hauer <s.hauer@pengutronix.de> Acked-by: NArnd Bergmann <arnd@arndb.de> Acked-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: linux-usb@vger.kernel.org
-
由 Shawn Guo 提交于
The inclusion of mach/hardware.h is not used by the driver at all. Remove it. Signed-off-by: NShawn Guo <shawn.guo@linaro.org> Acked-by: NSascha Hauer <s.hauer@pengutronix.de> Acked-by: NArnd Bergmann <arnd@arndb.de> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: alsa-devel@alsa-project.org
-
由 Shawn Guo 提交于
The inclusion of mach/hardware.h is not used in imx-sdma driver at all. Remove it. Signed-off-by: NShawn Guo <shawn.guo@linaro.org> Acked-by: NSascha Hauer <s.hauer@pengutronix.de> Acked-by: NArnd Bergmann <arnd@arndb.de> Cc: Vinod Koul <vinod.koul@intel.com>
-
由 Shawn Guo 提交于
The header ipu.h really belongs to dma subsystem rather than imx platform. Rename it to ipu-dma.h and put it into include/linux/dma/. Signed-off-by: NShawn Guo <shawn.guo@linaro.org> Acked-by: NGuennadi Liakhovetski <g.liakhovetski@gmx.de> Acked-by: NSascha Hauer <s.hauer@pengutronix.de> Acked-by: NArnd Bergmann <arnd@arndb.de> Cc: Vinod Koul <vinod.koul@intel.com> Cc: Florian Tobias Schandinat <FlorianSchandinat@gmx.de> Cc: linux-media@vger.kernel.org Cc: linux-fbdev@vger.kernel.org
-
由 Shawn Guo 提交于
The header mach/dma-mx1-mx2.h is used nowhere. Remove it. Signed-off-by: NShawn Guo <shawn.guo@linaro.org> Acked-by: NSascha Hauer <s.hauer@pengutronix.de> Acked-by: NArnd Bergmann <arnd@arndb.de>
-
由 Shawn Guo 提交于
Rename mach-imx/include/mach/ulpi.h to mach-imx/ulpi.h, and update users to include ulpi.h rather than mach/ulpi.h. Signed-off-by: NShawn Guo <shawn.guo@linaro.org> Acked-by: NSascha Hauer <s.hauer@pengutronix.de> Acked-by: NArnd Bergmann <arnd@arndb.de>
-
由 Shawn Guo 提交于
Rename mach-imx/include/mach/iram.h to mach-imx/iram.h, and update users to include iram.h rather than mach/iram.h. Signed-off-by: NShawn Guo <shawn.guo@linaro.org> Acked-by: NSascha Hauer <s.hauer@pengutronix.de> Acked-by: NArnd Bergmann <arnd@arndb.de>
-
由 Shawn Guo 提交于
Rename mach-imx/include/mach/iim.h to mach-imx/iim.h, and update users to include iim.h rather than mach/iim.h. Signed-off-by: NShawn Guo <shawn.guo@linaro.org> Acked-by: NSascha Hauer <s.hauer@pengutronix.de> Acked-by: NArnd Bergmann <arnd@arndb.de>
-
由 Shawn Guo 提交于
Rename mach-imx/include/mach/cpuidle.h to mach-imx/cpuidle.h, and update users to include cpuidle.h rather than mach/cpuidle.h. Signed-off-by: NShawn Guo <shawn.guo@linaro.org> Acked-by: NSascha Hauer <s.hauer@pengutronix.de> Acked-by: NArnd Bergmann <arnd@arndb.de>
-
由 Shawn Guo 提交于
Rename mach-imx/include/mach/common.h to mach-imx/common.h and update all users to include common.h rather than mach/common.h. It also removes an unneeded inclusion to common.h in mach-imx/devices/devices.c. Signed-off-by: NShawn Guo <shawn.guo@linaro.org> Acked-by: NSascha Hauer <s.hauer@pengutronix.de> Acked-by: NArnd Bergmann <arnd@arndb.de>
-
由 Shawn Guo 提交于
It's really unnecessary to have plat-mxc, and let's merge it into mach-imx. It's pretty much just a bunch of file renaming and Kconfig/Makefile merge. To make the change less invasive, we keep using Kconfig symbol CONFIG_ARCH_MXC for mach-imx sub-architecture. Signed-off-by: NShawn Guo <shawn.guo@linaro.org> Acked-by: NSascha Hauer <s.hauer@pengutronix.de> Acked-by: NArnd Bergmann <arnd@arndb.de>
-
由 Shawn Guo 提交于
It moves platform device code from plat-mxc into mach-imx. Along with that, header devices-common.h gets moved from plat-mxc/include/mach/ into mach-imx/devices/. Signed-off-by: NShawn Guo <shawn.guo@linaro.org> Acked-by: NSascha Hauer <s.hauer@pengutronix.de> Acked-by: NArnd Bergmann <arnd@arndb.de>
-
由 Shawn Guo 提交于
There is no need for device-imx*.h to include <soc>.h. Remove them and fix one indirect inclusion in mach-mx31ads.c. Signed-off-by: NShawn Guo <shawn.guo@linaro.org> Acked-by: NSascha Hauer <s.hauer@pengutronix.de> Acked-by: NArnd Bergmann <arnd@arndb.de>
-
由 Shawn Guo 提交于
The board files in mach-imx are the only users of iomux drivers and headers. Move them into mach-imx from plat-mxc. Signed-off-by: NShawn Guo <shawn.guo@linaro.org> Acked-by: NSascha Hauer <s.hauer@pengutronix.de> Acked-by: NArnd Bergmann <arnd@arndb.de>
-
由 Shawn Guo 提交于
The headers that are only used by board files do not necessarily need to be in plat-mxc/include/mach. Move them to the same place as those board files. Signed-off-by: NShawn Guo <shawn.guo@linaro.org> Acked-by: NSascha Hauer <s.hauer@pengutronix.de> Acked-by: NArnd Bergmann <arnd@arndb.de>
-
由 Linus Torvalds 提交于
-
git://git.linux-mips.org/pub/scm/ralf/upstream-linus由 Linus Torvalds 提交于
Pull MIPS update from Ralf Baechle: "Cleanups and fixes for breakage that occured earlier during this merge phase. Also a few patches that didn't make the first pull request. Of those is the Alchemy work that merges code for many of the SOCs and evaluation boards thus among other code shrinkage, reduces the number of MIPS defconfigs by 5." * 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (22 commits) MIPS: SNI: Switch RM400 serial to SCCNXP driver MIPS: Remove unused empty_bad_pmd_table[] declaration. MIPS: MT: Remove kspd. MIPS: Malta: Fix section mismatch. MIPS: asm-offset.c: Delete unused irq_cpustat_t struct offsets. MIPS: Alchemy: Merge PB1100/1500 support into DB1000 code. MIPS: Alchemy: merge PB1550 support into DB1550 code MIPS: Alchemy: Single kernel for DB1200/1300/1550 MIPS: Optimize TLB refill for RI/XI configurations. MIPS: proc: Cleanup printing of ASEs. MIPS: Hardwire detection of DSP ASE Rev 2 for systems, as required. MIPS: Add detection of DSP ASE Revision 2. MIPS: Optimize pgd_init and pmd_init MIPS: perf: Add perf functionality for BMIPS5000 MIPS: perf: Split the Kconfig option CONFIG_MIPS_MT_SMP MIPS: perf: Remove unnecessary #ifdef MIPS: perf: Add cpu feature bit for PCI (performance counter interrupt) MIPS: perf: Change the "mips_perf_event" table unsupported indicator. MIPS: Align swapper_pg_dir to 64K for better TLB Refill code. vmlinux.lds.h: Allow architectures to add sections to the front of .bss ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux由 Linus Torvalds 提交于
Pull module signing support from Rusty Russell: "module signing is the highlight, but it's an all-over David Howells frenzy..." Hmm "Magrathea: Glacier signing key". Somebody has been reading too much HHGTTG. * 'modules-next' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux: (37 commits) X.509: Fix indefinite length element skip error handling X.509: Convert some printk calls to pr_devel asymmetric keys: fix printk format warning MODSIGN: Fix 32-bit overflow in X.509 certificate validity date checking MODSIGN: Make mrproper should remove generated files. MODSIGN: Use utf8 strings in signer's name in autogenerated X.509 certs MODSIGN: Use the same digest for the autogen key sig as for the module sig MODSIGN: Sign modules during the build process MODSIGN: Provide a script for generating a key ID from an X.509 cert MODSIGN: Implement module signature checking MODSIGN: Provide module signing public keys to the kernel MODSIGN: Automatically generate module signing keys if missing MODSIGN: Provide Kconfig options MODSIGN: Provide gitignore and make clean rules for extra files MODSIGN: Add FIPS policy module: signature checking hook X.509: Add a crypto key parser for binary (DER) X.509 certificates MPILIB: Provide a function to read raw data into an MPI X.509: Add an ASN.1 decoder X.509: Add simple ASN.1 grammar compiler ...
-
由 Matt Fleming 提交于
The hostprogs need access to the CONFIG_* symbols found in include/generated/autoconf.h. But commit abbf1590 ("UAPI: Partition the header include path sets and add uapi/ header directories") replaced $(LINUXINCLUDE) with $(USERINCLUDE) which doesn't contain the necessary include paths. This has the undesirable effect of breaking the EFI boot stub because the #ifdef CONFIG_EFI_STUB code in arch/x86/boot/tools/build.c is never compiled. It should also be noted that because $(USERINCLUDE) isn't exported by the top-level Makefile it's actually empty in arch/x86/boot/Makefile. Cc: H. Peter Anvin <hpa@zytor.com> Cc: Ingo Molnar <mingo@kernel.org> Acked-by: NDavid Howells <dhowells@redhat.com> Signed-off-by: NMatt Fleming <matt.fleming@intel.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Ingo Molnar 提交于
The UAPI commits forgot to test tooling builds such as tools/perf/, and this fixes the fallout. Manual conversion. Signed-off-by: NIngo Molnar <mingo@kernel.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 14 10月, 2012 8 次提交
-
-
git://git.linaro.org/people/rmk/linux-arm由 Linus Torvalds 提交于
Pull ARM update from Russell King: "This is the final round of stuff for ARM, left until the end of the merge window to reduce the number of conflicts. This set contains the ARM part of David Howells UAPI changes, and a fix to the ordering of 'select' statements in ARM Kconfig files (see the appropriate commit for why this happened - thanks to Andrew Morton for pointing out the problem.) I've left this as long as I dare for this window to avoid conflicts, and I regenerated the config patch yesterday, posting it to our mailing list for review and testing. I have several acks which include successful test reports for it. However, today I notice we've got new conflicts with previously unseen code... though that conflict should be trivial (it's my changes vs a one liner.)" * 'late-for-linus' of git://git.linaro.org/people/rmk/linux-arm: ARM: config: make sure that platforms are ordered by option string ARM: config: sort select statements alphanumerically UAPI: (Scripted) Disintegrate arch/arm/include/asm Fix up fairly conflict in arch/arm/Kconfig (the select re-organization vs recent addition of GENERIC_KERNEL_EXECVE)
-
git://git.infradead.org/users/dhowells/linux-headers由 Linus Torvalds 提交于
Pull UAPI disintegration for include/linux/{,byteorder/}*.h from David Howells: "The patches contained herein do the following: (1) Remove kernel-only stuff in linux/ppp-comp.h from the UAPI. I checked this with Paul Mackerras before I created the patch and he suggested some extra bits to unexport. (2) Remove linux/blk_types.h entirely from the UAPI as none of it is userspace applicable, and remove from the UAPI that part of linux/fs.h that was the reason for linux/blk_types.h being exported in the first place. I discussed this with Jens Axboe before creating the patch. (3) The big patch of the series to disintegrate include/linux/*.h as a unit. This could be split up, though there would be collisions in moving stuff between the two Kbuild files when the parts are merged as that file is sorted alphabetically rather than being grouped by subsystem. Of this set of headers, 17 files have changed in the UAPI exported region since the 4th and only 8 since the 9th so there isn't much change in this area - as one might expect. It should be pretty obvious and straightforward if it does come to fixing up: stuff in __KERNEL__ guards stays where it is and stuff outside moves to the same file in the include/uapi/linux/ directory. If a new file appears then things get a bit more complicated as the "headers +=" line has to move to include/uapi/linux/Kbuild. Only one new file has appeared since the 9th and I judge this type of event relatively unlikely. (4) A patch to disintegrate include/linux/byteorder/*.h as a unit. Signed-off-by: David Howells <dhowells@redhat.com>" * tag 'disintegrate-main-20121013' of git://git.infradead.org/users/dhowells/linux-headers: UAPI: (Scripted) Disintegrate include/linux/byteorder UAPI: (Scripted) Disintegrate include/linux UAPI: Unexport linux/blk_types.h UAPI: Unexport part of linux/ppp-comp.h
-
git://git.infradead.org/users/dhowells/linux-headers由 Linus Torvalds 提交于
Pull spi UAPI disintegration from David Howells: "This is to complete part of the Userspace API (UAPI) disintegration for which the preparatory patches were pulled recently. After these patches, userspace headers will be segregated into: include/uapi/linux/.../foo.h for the userspace interface stuff, and: include/linux/.../foo.h for the strictly kernel internal stuff. Signed-off-by: NDavid Howells <dhowells@redhat.com> Acked-by: Grant Likely <grant.likely@secretlab.ca>" * tag 'disintegrate-spi-20121009' of git://git.infradead.org/users/dhowells/linux-headers: UAPI: (Scripted) Disintegrate include/linux/spi
-
git://openrisc.net/jonas/linux由 Linus Torvalds 提交于
Pull OpenRISC uapi disintegration from Jonas Bonn: "OpenRISC UAPI disintegration work from David Howells" * tag 'openrisc-uapi' of git://openrisc.net/jonas/linux: UAPI: (Scripted) Disintegrate arch/openrisc/include/asm
-
git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace由 Linus Torvalds 提交于
Pull user namespace compile fixes from Eric W Biederman: "This tree contains three trivial fixes. One compiler warning, one thinko fix, and one build fix" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace: btrfs: Fix compilation with user namespace support enabled userns: Fix posix_acl_file_xattr_userns gid conversion userns: Properly print bluetooth socket uids
-
git://neil.brown.name/md由 Linus Torvalds 提交于
Pull md updates from NeilBrown: - "discard" support, some dm-raid improvements and other assorted bits and pieces. * tag 'md-3.7' of git://neil.brown.name/md: (29 commits) md: refine reporting of resync/reshape delays. md/raid5: be careful not to resize_stripes too big. md: make sure manual changes to recovery checkpoint are saved. md/raid10: use correct limit variable md: writing to sync_action should clear the read-auto state. Subject: [PATCH] md:change resync_mismatches to atomic64_t to avoid races md/raid5: make sure to_read and to_write never go negative. md: When RAID5 is dirty, force reconstruct-write instead of read-modify-write. md/raid5: protect debug message against NULL derefernce. md/raid5: add some missing locking in handle_failed_stripe. MD: raid5 avoid unnecessary zero page for trim MD: raid5 trim support md/bitmap:Don't use IS_ERR to judge alloc_page(). md/raid1: Don't release reference to device while handling read error. raid: replace list_for_each_continue_rcu with new interface add further __init annotations to crypto/xor.c DM RAID: Fix for "sync" directive ineffectiveness DM RAID: Fix comparison of index and quantity for "rebuild" parameter DM RAID: Add rebuild capability for RAID10 DM RAID: Move 'rebuild' checking code to its own function ...
-
由 Russell King 提交于
-
由 Russell King 提交于
The large platform selection choice should be sorted by option string so it's easy to find the platform you're looking for. Fix the few options which are out of this order. Acked-by: NTony Lindgren <tony@atomide.com> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-