- 26 4月, 2014 4 次提交
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi由 Linus Torvalds 提交于
Pull SCSI fixes from James Bottomley: "This is a set of seven fixes, three (hpsa) and free'd command references correcting bugs in the last round of updates and the remaining four correcting problems within the SCSI error handler that was causing a deadlock within USB" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: [SCSI] More USB deadlock fixes [SCSI] Fix USB deadlock caused by SCSI error handling [SCSI] Fix command result state propagation [SCSI] Fix spurious request sense in error handling [SCSI] don't reference freed command in scsi_prep_return [SCSI] don't reference freed command in scsi_init_sgtable [SCSI] hpsa: fix NULL dereference in hpsa_put_ctlr_into_performant_mode()
-
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc由 Linus Torvalds 提交于
Pull ARM SoC fixes from Arnd Bergmann: "Since we didn't get around to collect fixes in time for -rc2 over the easter vacation, this one is unfortunately a bit larger than we'd like for an -rc3 merge. A large set of the changes is in the device tree sources, so I'm splitting out the description between code changes and DT changes. Aside from omap and versatile express, the actual code bugs are and trivial. Here is an overview: imx: - fix video clock settings - fix one clock refcounting bug omap: - update defconfig for renamed USB PHY driver - fix error handling in gpmc - fix N900 video initialization regression - fix reression in hwmod code from missing braces - fix am43xx and omap3 clocks - remove bogus write to voltage control register pxa: - fix build regression from 3.13 header cleanup rockchip: - fix a misleading printk string shmobile: - fix incorrect sound setting on multiple machines spear: - remove incorrect __init section annotation tegra: - remove a stale Kconfig entry u300: - update defconfig ux500: - enable common wireless and sensor drivers in defconfig - more defconfig updates vexpress: - fix voltage calculation for opp - fix reboot hang and warning - fix out-of-bounds array access - improve error handling in clock driver overall: - always select CLKSRC_OF in multiplatform builds And these are the devicetree related changes: imx: - add missing #clock-cell properties - fix pinctrl setting in imx6sl-evk - fix video endpoint on imx53 - remove obsolete lvds-channel nodes (multiple patches) - add missing second stmpe node - fix usb host mode on dmo-edmqmx6 (multiple patches) - fix gic node #address-cells to match usage - add missing legacy IRQ map for PCIe - fix microsom pincontrol setting for rgmii - fix fatal typo in touchscreen DT usage for mx5 - list all RAM present on m53evk and mx53qsb omap: - fix bug in DT handling of gpmc external bus - add DT for older revision of beagleboard - fix regression after DT node name fixes - remove obsolete properties for gpmc - fix pinmux comment to match DT it refers to - fix newly added dra7xx clock node data - add missing clock for USB PHY mvebu: - add missing clock for mdio node - fix nonstandard vendor prefixes on i2c nodes rockchip: - fix pin control setting for uart shmobile: - fix typo in DT data for pin control (multiple patches) - fix gic node #address-cells to match usage tegra: - fix clock and uart DT representation to match hardware zynq: - add DT nodes for newly added driver - add DT properties required for cpufreq-ondemand overall: - restore alphabetic order in Makefile - grammar fixes in bindings" * tag 'fixes-3.15-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (66 commits) ARM: vexpress/TC2: Convert OPP voltage to uV before storing power/reset: vexpress: Fix restart/power off operation dt: tegra: remove non-existent clock IDs clk: tegra: remove non-existent clocks ARM: tegra: remove UART5/UARTE from tegra124.dtsi ARM: tegra: remove TEGRA_EMC_SCALING_ENABLE ARM: Tidy up DTB Makefile entries ARM: fix missing CLKSRC_OF on multi-platform ARM: spear: add __init to spear_clocksource_init() ARM: pxa: hx4700.h: include "irqs.h" for PXA_NR_BUILTIN_GPIO arm/mach-vexpress: array accessed out of bounds clk: vexpress: NULL dereference on error path ARM: OMAP2+: Fix GPMC remap for devices using an offset ARM: zynq: dt: Add I2C nodes to Zynq device tree ARM: zynq: DT: Add 'clock-latency' property ARM: OMAP2+: Fix oops for GPMC free ARM: dts: Add support for the BeagleBoard xM A/B ARM: dts: Grammar /that will/it will/ ARM: dts: Grammar /is uses/ is used/ ARM: OMAP2+: Fix config name for USB3 PHY ...
-
git://git.samba.org/jlayton/linux由 Linus Torvalds 提交于
Pull file locking fixes from Jeff Layton: "File locking related bugfixes for v3.15 (pile #2) - fix for a long-standing bug in __break_lease that can cause soft lockups - renaming of file-private locks to "open file description" locks, and the command macros to more visually distinct names The fix for __break_lease is also in the pile of patches for which Bruce sent a pull request, but I assume that your merge procedure will handle that correctly. For the other patches, I don't like the fact that we need to rename this stuff at this late stage, but it should be settled now (hopefully)" * tag 'locks-v3.15-2' of git://git.samba.org/jlayton/linux: locks: rename FL_FILE_PVT and IS_FILE_PVT to use "*_OFDLCK" instead locks: rename file-private locks to "open file description locks" locks: allow __break_lease to sleep even when break_time is 0
-
git://linux-nfs.org/~bfields/linux由 Linus Torvalds 提交于
Pull nfsd bugfixes from Bruce Fields: "Three small nfsd bugfixes (including one locks.c fix for a bug triggered only from nfsd). Jeff's patches are for long-existing problems that became easier to trigger since the addition of vfs delegation support" * 'for-3.15' of git://linux-nfs.org/~bfields/linux: Revert "nfsd4: fix nfs4err_resource in 4.1 case" nfsd: set timeparms.to_maxval in setup_callback_client locks: allow __break_lease to sleep even when break_time is 0
-
- 25 4月, 2014 8 次提交
-
-
git://git.xilinx.com/linux-xlnx由 Arnd Bergmann 提交于
arm: Xilinx Zynq DT fixes for v3.15 - Enable Zynq I2c - Fix cpufreq DT binding * tag 'zynq-dt-fixes-for-3.15' of git://git.xilinx.com/linux-xlnx: ARM: zynq: dt: Add I2C nodes to Zynq device tree ARM: zynq: DT: Add 'clock-latency' property Signed-off-by: NArnd Bergmann <arnd@arndb.de>
-
git://git.linaro.org/people/pawel.moll/linux由 Arnd Bergmann 提交于
ARM Versatile Express fixes for 3.15 This series contains straight-forward fixes for different Versatile Express infrastructure drivers: - NULL pointer dereference on the error path in the clk driver - out of boundary array access in the dcscb driver - broken restart/power off implementation - mis-interpreted voltage unit in the spc driver * tag 'vexpress/fixes-for-3.15' of git://git.linaro.org/people/pawel.moll/linux: ARM: vexpress/TC2: Convert OPP voltage to uV before storing power/reset: vexpress: Fix restart/power off operation arm/mach-vexpress: array accessed out of bounds clk: vexpress: NULL dereference on error path Includes an update to 3.15-rc2 Signed-off-by: NArnd Bergmann <arnd@arndb.de>
-
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator由 Linus Torvalds 提交于
Pull regulator fixes from Mark Brown: "A couple of things here: - Fixes for pbias that didn't make it in during the merge window due to the driver coming in via MMC. The conversion to use helpers is a fix as it implements list_voltage() which the main user (MMC) relies on for correct functioning. - Change the !REGULATOR stub for optional regulators to return an error rather than a dummy; this is more in keeping with the intended use of optional regulators and fixes some issues seen MMC where it got confused by a dummy being provided" * tag 'regulator-v3.15-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: regulator: core: Return error in get optional stub regulator: pbias: Convert to use regmap helper functions regulator: pbias: Fix is_enabled callback implementation
-
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi由 Linus Torvalds 提交于
Pull spi fixes from Mark Brown: "A few driver specific fixes here: - SH HSPI was dealing with its clocks incorrectly which meant it didn't work on some SoCs, fixing this also requires a small fix to one of the SoC clock trees to avoid breaking existing users. - The SiRF driver appears to have had several quality problems, it's fairly new and not widely used so this isn't too worrying. - A brute force fix for excessive locking in the Atmel driver, it needs further investigation but this deals with the immediate issue. - A build fix for the Blackfin driver" * tag 'spi-v3.15-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: spi: atmel: Fix scheduling while atomic bug spi: sh-hspi: Do not specifically request shyway_clk clock ARM: shmobile: r8a7778: Use clks as MSTP007 parent spi: sirf: make GPIO chipselect function work well spi: sirf: set SPI controller in RISC IO chipselect mode spi: sirf: correct TXFIFO empty interrupt status bit spi: bfin5xx: fix build error
-
git://git.linaro.org/people/mszyprowski/linux-dma-mapping由 Linus Torvalds 提交于
Pull dma-mapping fix from Marek Szyprowski: "A small fix for dma-mapping subsystem for ARM" * 'fixes_for_v3.15' of git://git.linaro.org/people/mszyprowski/linux-dma-mapping: arm: dma-mapping: Fix mapping size value
-
git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata由 Linus Torvalds 提交于
Pull libata fixes from Tejun Heo: "Dan updated tag allocation to accomodate devices which choke when tags jump back and forth. Quite a few ahci MSI related fixes. A couple config dependency fixes and other misc fixes" * 'for-3.15-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata: libata/ahci: accommodate tag ordered controllers ahci: Do not receive interrupts sent by dummy ports ahci: Use pci_enable_msi_exact() instead of pci_enable_msi_range() ahci: Ensure "MSI Revert to Single Message" mode is not enforced ahci: do not request irq for dummy port pata_samsung_cf: fix ata_host_activate() failure handling pata_arasan_cf: fix ata_host_activate() failure handling ata: fix i.MX AHCI driver dependencies pata_at91: fix ata_host_activate() failure handling libata: Update queued trim blacklist for M5x0 drives libata: make AHCI_XGENE depend on PHY_XGENE
-
由 Punit Agrawal 提交于
The SPC stores voltage in mV while the code assumes it was returning uV. Convert the returned voltage to uV before storing. Also fix the comment depicting voltage to uV. Signed-off-by: NPunit Agrawal <punit.agrawal@arm.com> Reviewed-by: NSudeep Holla <sudeep.holla@arm.com> Signed-off-by: NPawel Moll <pawel.moll@arm.com>
-
由 Pawel Moll 提交于
The restart/power off implementation in the vexpress driver used to obtain the config function when necessary. This was wrong in two respects: 1. It required memory allocation with disabled interrupts (it worked, but lockdep - when enabled - reported warnings). 2. Used jiffies-based timeout, while jiffies are not running at this stage of system shutdown (therefore a config transaction error - if happened - would have never be reported). Fixed by pre-allocating the config function per device and using mdelay for timeout. Signed-off-by: NPawel Moll <pawel.moll@arm.com>
-
- 24 4月, 2014 20 次提交
-
-
由 Stephen Warren 提交于
The Tegra124 clock DT binding currently provides 3 clocks that don't actually exist; 2 for NAND and one for UART5/UARTE. Delete these. While this is technically an incompatible DT ABI change, nothing could have used these clock IDs for anything practical, since the HW doesn't exist. Cc: <stable@vger.kernel.org> Signed-off-by: NStephen Warren <swarren@nvidia.com> Signed-off-by: NArnd Bergmann <arnd@arndb.de>
-
由 Stephen Warren 提交于
The Tegra124 clock driver currently provides 3 clocks that don't actually exist; 2 for NAND and one for UART5/UARTE. Delete these. Cc: <stable@vger.kernel.org> Signed-off-by: NStephen Warren <swarren@nvidia.com> Signed-off-by: NArnd Bergmann <arnd@arndb.de>
-
由 Stephen Warren 提交于
Tegra124 only has 4 UARTs. Parts of the documentation hint at a fifth UART, but this appears to be left-over from earlier SoC documentation. Remove the non-existent DT node for UART5. Cc: <stable@vger.kernel.org> Signed-off-by: NStephen Warren <swarren@nvidia.com> Signed-off-by: NArnd Bergmann <arnd@arndb.de>
-
由 Arnd Bergmann 提交于
Merge tag 'omap-for-v3.15/fixes-v2-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into fixes Fixes for omaps, mostly to fix some GPMC, DSS and USB issues for device tree based booting. And turns out BeagleBoard xM A/B needs it's own minimal dts in addition to the related u-boot changes. Also few minor documentation and typo fixes are merged to get them out of the way. * tag 'omap-for-v3.15/fixes-v2-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: OMAP2+: Fix GPMC remap for devices using an offset ARM: OMAP2+: Fix oops for GPMC free ARM: dts: Add support for the BeagleBoard xM A/B ARM: dts: Grammar /that will/it will/ ARM: dts: Grammar /is uses/ is used/ ARM: OMAP2+: Fix config name for USB3 PHY ARM: dts: am335x: update USB DT references ARM: dts: OMAP2+: remove uses of obsolete gpmc,device-nand ARM: AM335X: EVM: fix pinmux documentation in devicetree ARM: OMAP2+: N900: remove omapdss init for DT boot ARM: dts: dra7xx-clocks: Correct mcasp2_ahclkx_mux bit-shift ARM: dts: omap5: Add clocks to USB3 PHY node ARM: OMAP2+: hwmod: fix missing braces in _init() ARM: AM43xx: fix dpll init in bypass mode ARM: OMAP3: hwmod data: Correct clock domains for USB modules ARM: OMAP3: PM: remove access to PRM_VOLTCTRL register Signed-off-by: NArnd Bergmann <arnd@arndb.de>
-
由 Arnd Bergmann 提交于
Merge tag 'ux500-defconfig-for-arm-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-stericsson into fixes This is a patch set for some ST-Ericsson devices: - Updates the Ux500 (U8500) defconfig - Selects PARTITION_ADVANCED for Ux500 and U300 - Configure in IIO sensor drivers for the Ux500 - Configure in the CW1200 WLAN chip for the Ux500 * tag 'ux500-defconfig-for-arm-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-stericsson: ARM: ux500: configure for CW1200 WLAN chip ARM: ux500: configure in sensors ARM: u300: u300_defconfig: Enable PARTITION_ADVANCED ARM: ux500: u8500_defconfig: Enable PARTITION_ADVANCED ARM: ux500: update defconfig Signed-off-by: NArnd Bergmann <arnd@arndb.de>
-
由 Arnd Bergmann 提交于
Merge tag 'renesas-fixes-for-v3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into fixes Renesas ARM Based SoC Fixes Updates for v3.15 r8a7791 (R-Car M2) based koelsch board * Correct renesas,gpios to renesas,groups in sd[012] pfc 8a7790 (R-Car H2) based lager board * Correct SND_SOC_DAIFMT_CBx_CFx flags r8a7740 (R-Mobile A1) SoC * Drop address cells from GIC node r8a7740 (R-Mobile A1) based Armadillo800 EVA board * Correct SND_SOC_DAIFMT_CBx_CFx flags sh73a0 (SH-Mobile AG5) SoC * Drop address cells from GIC node * tag 'renesas-fixes-for-v3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: ARM: shmobile: koelsch: correct renesas,gpios to renesas,groups in sd[012] pfc ARM: shmobile: r8a7740: drop address cells from GIC node ARM: shmobile: sh73a0: drop address cells from GIC node ARM: shmobile: armadillo800eva: fixup SND_SOC_DAIFMT_CBx_CFx flags ARM: shmobile: lager: fixup SND_SOC_DAIFMT_CBx_CFx flags Signed-off-by: NArnd Bergmann <arnd@arndb.de>
-
由 Arnd Bergmann 提交于
Merge tag 'renesas-dt5-for-v3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into fixes Fifth Round of Renesas ARM Based SoC DT Updates for v3.15 Correct renesas,groups in SDHI nodes of for r8a7790 (R-Car H2) based Lager board. * tag 'renesas-dt5-for-v3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: ARM: shmobile: lager: correct renesas,gpios to renesas,groups in sd[02] pfc Signed-off-by: NArnd Bergmann <arnd@arndb.de>
-
由 Arnd Bergmann 提交于
Merge tag 'v3.15-rockchip-fixes1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into fixes Fixing uart-rx pull settings and a copy'n'paste error in a smp message * tag 'v3.15-rockchip-fixes1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: ARM: rockchip: fix copy'n'paste error in smp error messages ARM: rockchip: rk3188: enable pull-ups on UART RX pins Signed-off-by: NArnd Bergmann <arnd@arndb.de>
-
由 Arnd Bergmann 提交于
Merge tag 'imx-fixes-3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into fixes The i.MX fixes for 3.15: - A couple of dts changes for the fallout of imx-drm binding update - Parent DI clocks to video PLL for better HDMI support - PCIe interrupt mapping and GIC node fixes - A series of edmqmx6 board fixes - Other small and random fixes on imx5 and imx6 dts * tag 'imx-fixes-3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: ARM: i.MX6: ipu_di_sel clocks can set parent rates ARM: imx6q: clk: Parent DI clocks to video PLL via di_pre_sel ARM: dts: imx: add required #clock-cells for fixed-clock ARM: dts: vybrid: drop address and size cells from GIC node ARM: dts: imx6sl-evk: Add an entry for MX6SL_PAD_ECSPI1_SS0__GPIO4_IO11 ARM: dts: imx53: fix apparent copy/paste error ARM: dts: imx6q-gw5xxx: remove dead 'crtcs' property ARM: dts: imx53-tx53: add IPU DI ports and endpoints ARM: dts: imx6: edmqmx6: add second STMPE ARM: dts: imx6: edmqmx6: USB H1 only supports host mode ARM: dts: imx6: edmqmx6: Do not use the OTG switch as VBUS regulator ARM: dts: imx6: edmqmx6: Fix usbotg id pin ARM: dt: microsom: don't set bit 7 for ethernet mux settings ARM: imx6q-clk: parent lvds_gate from lvds_sel ARM: dts: imx: drop invalid size and address cells properties ARM: dts: mx5: fix wrong stmpe-ts bindings ARM: dts: imx53-m53evk: Fix memory region description ARM: dts: imx53-qsb-common: Fix memory region description ARM: dts: imx6: add PCIe interrupt mapping properties Signed-off-by: NArnd Bergmann <arnd@arndb.de>
-
git://git.infradead.org/linux-mvebu由 Arnd Bergmann 提交于
mvebu DT fixes-non-critical (for v3.15-rc1) - kirkwood - add some missing vendor prefixes to keep checkpatch happy - mvebu - add clock ref to mdio node on 370/XP/38x * tag 'mvebu-dt-fixes-non-crit-3.15' of git://git.infradead.org/linux-mvebu: ARM: mvebu: ensure the mdio node has a clock reference on Armada 38x ARM: mvebu: ensure the mdio node has a clock reference on Armada 370/XP ARM: Kirkwood: DT: Add missing vendor prefix ARM: Kirkwood: Fix Atmel vendor prefix Signed-off-by: NArnd Bergmann <arnd@arndb.de>
-
由 Paul Bolle 提交于
Commit a7cbe92c ("ARM: tegra: remove tegra EMC scaling driver") removed the only user of TEGRA_EMC_SCALING_ENABLE. Remove its Kconfig entry too. Signed-off-by: NPaul Bolle <pebolle@tiscali.nl> Signed-off-by: NStephen Warren <swarren@nvidia.com> Signed-off-by: NArnd Bergmann <arnd@arndb.de>
-
由 Domenico Andreoli 提交于
Few things were out of order: - removed ARCH_BCM2835 duplicate - shuffled ARCH_BCM_5301X, ARCH_U8500 and ARCH_U300 around so to keep the list sorted Cc: Arnd Bergmann <arnd@arndb.de> Cc: Olof Johansson <olof@lixom.net> Signed-by: NDomenico Andreoli <domenico.andreoli@linux.com> Signed-off-by: NArnd Bergmann <arnd@arndb.de>
-
由 Rob Herring 提交于
In commit ddb902cc (ARM: centralize common multi-platform kconfig options), CLKSRC_OF was removed from some platforms, but not added to ARCH_MULTIPLATFORM. Fix this. Reported-by: NLauri Hintsala <lauri.hintsala@bluegiga.com> Signed-off-by: NRob Herring <robh@kernel.org> Signed-off-by: NArnd Bergmann <arnd@arndb.de>
-
由 Alex Elder 提交于
I get a build warning because spear_clocksource_init() calls clocksource_mmio_init(), but it doesn't have an __init annotation. Fix that. Signed-off-by: NAlex Elder <elder@linaro.org> Acked-by: NViresh Kumar <viresh.kumar@linaro.org> Signed-off-by: NArnd Bergmann <arnd@arndb.de>
-
由 Andrea Adami 提交于
hx4700 needs the same fix as in 9705e746 "ARM: pxa: fix various compilation problems" Fix build errors. Initial one is: /linux/arch/arm/mach-pxa/include/mach/hx4700.h:18:32: error: 'PXA_NR_BUILTIN_GPIO' undeclared here (not in a function) | #define HX4700_ASIC3_GPIO_BASE PXA_NR_BUILTIN_GPIO Cc: stable@vger.kernel.org # v3.13+ Signed-off-by: NAndrea Adami <andrea.adami@gmail.com> Signed-off-by: NLinus Walleij <linus.walleij@linaro.org> Signed-off-by: NArnd Bergmann <arnd@arndb.de>
-
由 Heinrich Schuchardt 提交于
dcscb_allcpus_mask is an array of size 2. The index variable cluster has to be checked against this limit before accessing the array. Signed-off-by: NHeinrich Schuchardt <xypron.glpk@gmx.de> Acked-by: NNicolas Pitre <nico@linaro.org> Signed-off-by: NPawel Moll <pawel.moll@arm.com>
-
由 Dan Carpenter 提交于
If the allocation fails then we dereference the NULL in the error path. Just return directly. Fixes: ed27ff1d ('clk: Versatile Express clock generators ("osc") driver') Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com> Signed-off-by: NPawel Moll <pawel.moll@arm.com>
-
git://ftp.arm.linux.org.uk/~rmk/linux-arm由 Linus Torvalds 提交于
Pull ARM fixes from Russell King: "Various fixes and post-merge window updates. Included here are: - ensure Kconfig things which should be sorted remain sorted - fix three big-endian bugs which crept in during the last merge window - add the renameat2 syscall - fix big.LITTLE switcher initialisation checks - fix kdump vmcore for LPAE kernels" * 'fixes' of git://ftp.arm.linux.org.uk/~rmk/linux-arm: ARM: add renameat2 syscall ARM: keep arch/arm/Kconfig and arch/arm/mm/Kconfig select entries sorted ARM: 8033/1: fix big endian __pv_phys_pfn_offset size related issue ARM: 8032/1: bL_switcher: fix validation check before its activation ARM: 8030/1: ARM : kdump : add arch_crash_save_vmcoreinfo ARM: 8027/1: fix do_div() bug in big-endian systems ARM: 8026/1: Fix emulation of multiply accumulate instructions ARM: 8024/1: Keep DEBUG_UART_{PHYS,VIRT} entries sorted
-
由 Jeff Layton 提交于
File-private locks have been re-christened as "open file description" locks. Finish the symbol name cleanup in the internal implementation. Signed-off-by: NJeff Layton <jlayton@redhat.com>
-
由 Tony Lindgren 提交于
At least the smc91x driver expects the device to be at 0x300 offset from bus base address. This does not work currently for GPMC when booted in device tree mode as it attempts to remap the the allocated GPMC partition to the address configured by the device tree plus the device offset. Note that this works just fine when booted with legacy mode. Let's fix the issue by just ignoring any device specific offset while remapping. And let's make sure the remap address confirms to the GPMC 16MB minimum granularity as listed in the TRM for GPMC_CONFIG7 BASEADDRESS bits. Otherwise we can get something like this: omap-gpmc 6e000000.gpmc: cannot remap GPMC CS 1 to 0x01000300 Cc: Pekon Gupta <pekon@ti.com> Reviewed-by: NJavier Martinez Canillas <javier@dowhile0.org> Signed-off-by: NTony Lindgren <tony@atomide.com>
-
- 23 4月, 2014 8 次提交
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input由 Linus Torvalds 提交于
Pull input updates from Dmitry Torokhov: "The main change is that we now publish "firmware ID" for the serio devices to help userspace figure out the kind of touchpads it is dealing with: i8042 will export PS/2 port's PNP IDs as firmware IDs. You will also get more quirks for Synaptics touchpads in various Lenovo laptops, a change to elantech driver to recognize even more models, and fixups to wacom and couple other drivers" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: elantech - add support for newer elantech touchpads Input: soc_button_array - fix a crash during rmmod Input: synaptics - add min/max quirk for ThinkPad T431s, L440, L540, S1 Yoga and X1 Input: synaptics - report INPUT_PROP_TOPBUTTONPAD property Input: Add INPUT_PROP_TOPBUTTONPAD device property Input: i8042 - add firmware_id support Input: serio - add firmware_id sysfs attribute Input: wacom - handle 1024 pressure levels in wacom_tpc_pen Input: wacom - references to 'wacom->data' should use 'unsigned char*' Input: wacom - override 'pressure_max' with value from HID_USAGE_PRESSURE Input: wacom - use full 32-bit HID Usage value in switch statement Input: wacom - missed the last bit of expresskey for DTU-1031 Input: ads7846 - fix device usage within attribute show Input: da9055_onkey - remove use of regmap_irq_get_virq()
-
git://people.freedesktop.org/~airlied/linux由 Linus Torvalds 提交于
Pull radeon drm fixes from Dave Airlie: "This is just radeon fixes, primarily the two pll fix and the aux fix, it also disables dpm on rv770 gpus, fixes driver reloading, and fixes two issues with runtime PM on some GPUS" * 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: drm/radeon: don't allow runpm=1 on systems with out ATPX drm/radeon: fix ATPX detection on non-VGA GPUs drm/radeon/pm: don't walk the crtc list before it has been initialized (v2) drm/radeon: properly unregister hwmon interface (v2) drm/radeon: fix count in cik_sdma_ring_test() drm/radeon/aux: fix hpd assignment for aux bus drm/radeon: improve PLL limit handling in post div calculation drm/radeon: use fixed PPL ref divider if needed drm/radeon: disable dpm on rv770 by default
-
由 Ritesh Harjani 提交于
68efd7d2("arm: dma-mapping: remove order parameter from arm_iommu_create_mapping()") is causing kernel panic because it wrongly sets the value of mapping->size: Unable to handle kernel NULL pointer dereference at virtual address 000000a0 pgd = e7a84000 [000000a0] *pgd=00000000 ... PC is at bitmap_clear+0x48/0xd0 LR is at __iommu_remove_mapping+0x130/0x164 Fix it by correcting mapping->size value. Signed-off-by: NRitesh Harjani <ritesh.harjani@gmail.com> Acked-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: NMarek Szyprowski <m.szyprowski@samsung.com>
-
由 Mark Brown 提交于
Merge remote-tracking branches 'spi/fix/atmel', 'spi/fix/bfin5xx', 'spi/fix/hspi' and 'spi/fix/sirf' into spi-linus
-
由 Mark Brown 提交于
-
由 Mark Brown 提交于
-
由 Miklos Szeredi 提交于
Signed-off-by: NMiklos Szeredi <mszeredi@suse.cz> [dropped arch/arm/include/asm/unistd.h changes --rmk] Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Russell King 提交于
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-