- 13 12月, 2018 3 次提交
-
-
由 Xiang Chen 提交于
Sht->sg_tablesize is set in the driver, and it will be assigned to shost->sg_tablesize in SCSI mid-layer. So it is not necessary to assign shost->sg_table one more time in the driver. In addition to the change, change each scsi_host_template.sg_tablesize to HISI_SAS_SGE_PAGE_CNT instead of SG_ALL. Signed-off-by: NXiang Chen <chenxiang66@hisilicon.com> Signed-off-by: NJohn Garry <john.garry@huawei.com> Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
-
由 Xiang Chen 提交于
Relocate the codes related to dma_map/unmap in hisi_sas_task_prep() to reduce complexity, with a view to add DIF/DIX support. Signed-off-by: NXiang Chen <chenxiang66@hisilicon.com> Signed-off-by: NJohn Garry <john.garry@huawei.com> Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
-
由 John Garry 提交于
This patchset fixes some warnings detected by the sparse tool, like these: drivers/scsi/hisi_sas/hisi_sas_main.c:1469:52: warning: incorrect type in assignment (different base types) drivers/scsi/hisi_sas/hisi_sas_main.c:1469:52: expected unsigned short [unsigned] [assigned] [usertype] tag_of_task_to_be_managed drivers/scsi/hisi_sas/hisi_sas_main.c:1469:52: got restricted __le16 [usertype] <noident> drivers/scsi/hisi_sas/hisi_sas_main.c:1723:52: warning: incorrect type in assignment (different base types) drivers/scsi/hisi_sas/hisi_sas_main.c:1723:52: expected unsigned short [unsigned] [assigned] [usertype] tag_of_task_to_be_managed drivers/scsi/hisi_sas/hisi_sas_main.c:1723:52: got restricted __le16 [usertype] <noident> Signed-off-by: NJohn Garry <john.garry@huawei.com> Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
-
- 16 11月, 2018 2 次提交
-
-
由 Xiang Chen 提交于
In function hisi_sas_task_prep(), we check asd_sas_port, but in function hisi_sas_task_exec(), we already refer to asd_sas_port by using function dev_to_hisi_hba() implicitly. So to avoid this possible invalid dereference, relocate the check to function hisi_sas_task_prep(). Signed-off-by: NXiang Chen <chenxiang66@hisilicon.com> Signed-off-by: NJohn Garry <john.garry@huawei.com> Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
-
由 Xiang Chen 提交于
Currently all the three HBA (v1/v2/v3 HW) share the same host attributes. To support each HBA having separate attributes in future, create per-HBA attributes. Signed-off-by: NXiang Chen <chenxiang66@hisilicon.com> Signed-off-by: NJohn Garry <john.garry@huawei.com> Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
-
- 20 10月, 2018 1 次提交
-
-
由 Gustavo A. R. Silva 提交于
There is a NULL pointer dereference in case *slot* happens to be NULL at lines 1053 and 1878: struct hisi_sas_cq *cq = &hisi_hba->cq[slot->dlvry_queue]; Notice that *slot* is being NULL checked at lines 1057 and 1881: if (slot), which implies it may be NULL. Fix this by placing the declaration and definition of variable cq, which contains the pointer dereference slot->dlvry_queue, after slot has been properly NULL checked. Addresses-Coverity-ID: 1474515 ("Dereference before null check") Addresses-Coverity-ID: 1474520 ("Dereference before null check") Fixes: 584f53fe ("scsi: hisi_sas: Fix the race between IO completion and timeout for SMP/internal IO") Signed-off-by: NGustavo A. R. Silva <gustavo@embeddedor.com> Reviewed-by: NXiang Chen <chenxiang66@hisilicon.com> Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
-
- 16 10月, 2018 4 次提交
-
-
由 Xiang Chen 提交于
Currently we use the IPTT defined in LLDD to identify IOs. Actually for IOs which are from the block layer, they have tags to identify them. So for those IOs, use tag of the block layer directly, and for IOs which is not from the block layer (such as internal IOs from libsas/LLDD), reserve 96 IPTTs for them. Signed-off-by: NXiang Chen <chenxiang66@hisilicon.com> Signed-off-by: NJohn Garry <john.garry@huawei.com> Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
-
由 Xiang Chen 提交于
If SMP/internal IO times out, we will possibly free the task immediately. However if the IO actually completes at the same time, the IO completion may refer to task which has been freed. So to solve the issue, flush the tasklet to finish IO completion before free'ing slot/task. Signed-off-by: NXiang Chen <chenxiang66@hisilicon.com> Signed-off-by: NJohn Garry <john.garry@huawei.com> Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
-
由 Luo Jiaxing 提交于
In evaluating hisi_hba, the sas_port may be NULL, so for safety relocate the the check to value possible NULL deference. Signed-off-by: NLuo Jiaxing <luojiaxing@huawei.com> Signed-off-by: NJohn Garry <john.garry@huawei.com> Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
-
由 Luo Jiaxing 提交于
At directly attached situation, if the user modifies the sysfs interface of maximum_linkrate and minimum_linkrate to renegotiate the linkrate between SAS controller and target, the value of both files mentioned above should have change to user setting after renegotiate is over, but it remains unchanged. To fix this bug, maximum_linkrate and minimum_linkrate will be directly fed back to relevant sas_phy structure. Signed-off-by: NLuo Jiaxing <luojiaxing@huawei.com> Signed-off-by: NJohn Garry <john.garry@huawei.com> Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
-
- 26 9月, 2018 1 次提交
-
-
由 Jason Yan 提交于
Now LLDDs have to implement lldd_port_deformed method otherwise NULL dereference will happen. Make it optional and remove the dummy implementation in hisi_sas. Signed-off-by: NJason Yan <yanaijie@huawei.com> CC: John Garry <john.garry@huawei.com> CC: Johannes Thumshirn <jthumshirn@suse.de> CC: Ewan Milne <emilne@redhat.com> CC: Christoph Hellwig <hch@lst.de> CC: Tomas Henzl <thenzl@redhat.com> CC: Dan Williams <dan.j.williams@intel.com> CC: Hannes Reinecke <hare@suse.com> Acked-by: NJohn Garry <john.garry@huawei.com> Reviewed-by: NHannes Reinecke <hare@suse.com> Reviewed-by: NJohannes Thumshirn <jthumshirn@suse.de> Reviewed-by: NChristoph Hellwig <hch@lst.de> Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
-
- 20 7月, 2018 4 次提交
-
-
由 Xiaofei Tan 提交于
In task start delivery function, we need to add a memory barrier to prevent re-ordering of reading memory by hardware. Because the slot data is set in task prepare function and it could be running in another CPU. This patch adds an memory barrier after s->ready is read in the task start delivery function, and uses WRITE_ONCE() in the places where s->ready is set to ensure that the compiler does not re-order. Signed-off-by: NXiaofei Tan <tanxiaofei@huawei.com> Signed-off-by: NJohn Garry <john.garry@huawei.com> Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
-
由 Xiang Chen 提交于
To decrease the usage of spinlock during delivery IO, relocate some code in hisi_sas_task_prep(). Also an invalid comment is removed. Signed-off-by: NXiang Chen <chenxiang66@hisilicon.com> Signed-off-by: NJohn Garry <john.garry@huawei.com> Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
-
由 Xiaofei Tan 提交于
This patch tidies host controller reset function by putting some code to two new functions, and exports these two functions out, so that they could be used by FLR feature to be realised. Signed-off-by: NXiaofei Tan <tanxiaofei@huawei.com> Signed-off-by: NJohn Garry <john.garry@huawei.com> Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
-
由 John Garry 提交于
For some time now we have not used hisi_sas_slot_abort() to handle erroring slots, apart from in archaic v1 hw. As such, remove this function and associated code. For v1 hw, move error handling to same scheme as other hw revisions, where we allow erroring commands to timeout. Signed-off-by: NJohn Garry <john.garry@huawei.com> Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
-
- 20 6月, 2018 7 次提交
-
-
由 John Garry 提交于
The init is missed for hisi_sas_phy spinlock, so add it. Signed-off-by: NJohn Garry <john.garry@huawei.com> Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
-
由 Xiang Chen 提交于
Currently the driver spends much time allocating and freeing the slot DMA buffer for command delivery/completion. To boost the performance, pre-allocate the buffers for all IPTT. The downside of this approach is that we are reallocating all buffer memory upfront, so hog memory which we may not need. However, the current method - DMA buffer pool - also caches all buffers and does not free them until the pool is destroyed, so is not exactly efficient either. On top of this, since the slot DMA buffer is slightly bigger than a 4K page, we need to allocate 2x4K pages per buffer (for 4K page kernel), which is quite wasteful. For 64K page size this is not such an issue. So, for the 4K page case, in order to make memory usage more efficient, pre-allocating larger blocks of DMA memory for the buffers can be more efficient. To make DMA memory usage most efficient, we would choose a single contiguous DMA memory block, but this could use up all the DMA memory in the system (when CMA enabled and no IOMMU), or we may just not be able to allocate a DMA buffer large enough when no CMA or IOMMU. To decide the block size we use the LCM (least common multiple) of the buffer size and the page size. We roundup(64) to ensure the LCM is not too large, even though a little memory may be wasted per block. So, with this, the total memory requirement is about is about 17MB for 4096 max IPTT. Previously (for 4K pages case), it would be 32MB (for all slots allocated). With this change, the relative increase of IOPS for bs=4K read when PAGE_SIZE=4K and PAGE_SIZE=64K is as follows: IODEPTH 4K PAGE_SIZE 64K PAGE_SIZE 32 56% 47% 64 53% 44% 128 64% 43% 256 67% 45% Signed-off-by: NXiang Chen <chenxiang66@hisilicon.com> Signed-off-by: NJohn Garry <john.garry@huawei.com> Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
-
由 Xiaofei Tan 提交于
In host reset, we use TMF or soft-reset to re-init device, and if success, we will release all LLDD resources of this device. If the init fails - maybe because the device was removed or link has not come up - then do not release the LLDD resources, but rather rely on SCSI EH to handle the timeout for these resources later on. But if clear nexus ha calls host reset, which is the last effort of SCSI EH, we should release all LLDD remain resources. Because SCSI EH will release all tasks after clear nexus ha. Before release, we do I_T nexus reset to try to clear target remain IOs. Signed-off-by: NXiaofei Tan <tanxiaofei@huawei.com> Signed-off-by: NJohn Garry <john.garry@huawei.com> Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
-
由 Xiaofei Tan 提交于
During reset, we don't want PHY events reported to libsas for PHYs which were previously attached prior to reset. So check hisi_hba->flags for HISI_SAS_RESET_BIT to filter PHY events during reset. Signed-off-by: NXiaofei Tan <tanxiaofei@huawei.com> Signed-off-by: NJohn Garry <john.garry@huawei.com> Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
-
由 Xiaofei Tan 提交于
After soft_reset() for host reset, we should not be allowed to send commands to the HW before the PHYs have come up and the port ids have been refreshed. Prior to this point, any commands cannot be successfully completed. This exclusion is achieved by grabbing the host reset semaphore. Signed-off-by: NXiaofei Tan <tanxiaofei@huawei.com> Signed-off-by: NJohn Garry <john.garry@huawei.com> Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
-
由 Xiaofei Tan 提交于
There is a possible conflict when a device is removed and host reset occurs concurrently. The reason is that then the device is notified as gone, we try to clear the ITCT, which is notified via an interrupt. The dev gone function pends on this event with a completion, which is completed when the ITCT interrupt occurs. But host reset will disable all interrupts, the wait_for_completion() may wait indefinitely. This patch adds an semaphore to synchronise this two processes. The semaphore is taken by the host reset as the basis of synchronising. Signed-off-by: NXiaofei Tan <tanxiaofei@huawei.com> Signed-off-by: NJohn Garry <john.garry@huawei.com> Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
-
由 Xiang Chen 提交于
This patch replaces the usage of dma_alloc_coherent() with the managed version, dmam_alloc_coherent(), hereby reducing replicated code. Signed-off-by: NXiang Chen <chenxiang66@hisilicon.com> Signed-off-by; John Garry <john.garry@huawei.com> Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
-
- 29 5月, 2018 12 次提交
-
-
由 Xiang Chen 提交于
When issuing a nexus reset for directly attached device, we want to ignore the PHY down events so libsas will not deform and reform the port. In the case that the attached SAS changes for the reset, libsas will deform and form a port. For scenario that the PHY does not come up after a timeout period, then report the PHY down to libsas. Signed-off-by: NXiang Chen <chenxiang66@hisilicon.com> Signed-off-by: NJohn Garry <john.garry@huawei.com> Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
-
由 Xiaofei Tan 提交于
It is an step of executing task to get free slot. If the step fails, we will cleanup LLDD resources and should return failure to upper layer or internal caller to abort task execution of this time. But in the current code, the caller of get_free_slot() doesn't return failure when get_free_slot() failed. This patch is to fix it. Signed-off-by: NXiaofei Tan <tanxiaofei@huawei.com> Signed-off-by: NJohn Garry <john.garry@huawei.com> Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
-
由 Xiaofei Tan 提交于
For v2 hw, STP link from target is rejected after host reset because of a SoC bug. The STP reject will be terminated after we have sent IO from each PHY of a port. This is not an problem before, as we don't need to setup STP link from target immediately after host reset. But now, it is. Because we want to send soft-reset immediately after host reset. In order to terminate STP reject quickly, this patch send ATA reset command through each PHY of a port. Notes: ATA reset command don't need target's response. Besides, we do abort dev for each device before terminating STP reject. This is a quirk of v2 hw. Signed-off-by: NXiaofei Tan <tanxiaofei@huawei.com> Signed-off-by: NJohn Garry <john.garry@huawei.com> Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
-
由 Xiaofei Tan 提交于
In future scenarios we will want to use the TMF struct for more task types than SSP. As such, we can add struct hisi_sas_tmf_task directly into struct hisi_sas_slot, and this will mean we can remove the TMF parameters from the task prep functions. Signed-off-by: NXiaofei Tan <tanxiaofei@huawei.com> Signed-off-by: NJohn Garry <john.garry@huawei.com> Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
-
由 Xiaofei Tan 提交于
We may reset the controller in many scenarios, such as SCSI EH and HW errors. There should be no IO which returns from target when SCSI EH is active. But for other scenarios, there may be. It is not necessary to make such IOs fail. This patch adds an function of trying to wait for any commands, or IO, to complete before host reset. If no more CQ returned from host controller in 100ms, we assume no more IO can return, and then stop waiting. We wait 5s at most. The HW has a register CQE_SEND_CNT to indicate the total number of CQs that has been reported to driver. We can use this register and it is reliable to resd this register in such scenarios that require host reset. Signed-off-by: NXiaofei Tan <tanxiaofei@huawei.com> Signed-off-by: NJohn Garry <john.garry@huawei.com> Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
-
由 Xiaofei Tan 提交于
After the controller is reset, it is possible that the disks attached still have outstanding IO to complete. Thus, when the PHYs come back up after controller reset, it is possible that these IOs complete at some unknown point later. We want to ensure that all IOs are complete after the controller reset so that all associated IPTT and other resources can be recycled safely. To achieve this, re-init the disks by TMF or softreset (in case of ATA devices). If the init fails - maybe because the device was removed or link has not come up - then do not release the device resources, but rather rely on SCSI EH to handle the timeout for these resources later on. This patch also does some cleanup to hisi_sas_init_disk(), including removing superfluous cases in the switch statement. Signed-off-by: NXiaofei Tan <tanxiaofei@huawei.com> Signed-off-by: NJohn Garry <john.garry@huawei.com> Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
-
由 Xiang Chen 提交于
When a SCSI host is registered, the SCSI mid-layer takes a reference to a module in Scsi_host.hostt.module. In doing this, we are prevented from removing the driver module for the host in dangerous scenario, like when a disk is mounted. Currently there is only one scsi_host_template (sht) for all HW versions, and this is the main.c module. So this means that we can possibly remove the HW module in this dangerous scenario, as SCSI mid-layer is only referencing the main.c module. To fix this, create a sht per module, referencing that same module to create the Scsi host. Signed-off-by: NXiang Chen <chenxiang66@hisilicon.com> Signed-off-by: NJohn Garry <john.garry@huawei.com> Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
-
由 Xiang Chen 提交于
When a disk is discovered, it may be in an error state, or there may be residual commands remaining in the disk. To ensure any disk is in good state after discovery, reset via TMF (for SAS disk) or softreset (for a SATA disk). Signed-off-by: NXiang Chen <chenxiang66@hisilicon.com> Signed-off-by: NXiaofei Tan <tanxiaofei@huawei.com> Signed-off-by: NJohn Garry <john.garry@huawei.com> Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
-
由 Xiang Chen 提交于
To reduce possibility of hitting unknown SoC bugs and aid debugging and test, change allocation mode of device id from last used device id instead of lowest available index. Signed-off-by: NXiang Chen <chenxiang66@hisilicon.com> Signed-off-by: NJohn Garry <john.garry@huawei.com> Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
-
由 Xiang Chen 提交于
Currently we find the lowest available empty bit in the IPTT bitmap to allocate the IPTT for a command. To reduce possibility of hitting unknown SoC bugs and also aid in the debugging of those same bugs, change the allocation mode. The next allocation method is to use the next free slot adjacent to the most recently allocated slot, in a round-robin fashion. Signed-off-by: NXiang Chen <chenxiang66@hisilicon.com> Signed-off-by: NJohn Garry <john.garry@huawei.com> Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
-
由 John Garry 提交于
There is much common code and functionality between the HW versions to set the PHY linkrate. As such, this patch factors out the common code into a generic function hisi_sas_phy_set_linkrate(). Signed-off-by: NJohn Garry <john.garry@huawei.com> Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
-
由 Wei Yongjun 提交于
Fix a typo in hisi_sas_task_prep(). Fixes: 7eee4b92 ("scsi: hisi_sas: relocate smp sg map") Signed-off-by: NWei Yongjun <weiyongjun1@huawei.com> Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
-
- 18 5月, 2018 6 次提交
-
-
由 Xiaofei Tan 提交于
Currently we don't check that device is not gone before dereferencing its elements in the function hisi_sas_task_exec() (specifically, the DQ pointer). This patch fixes this issue by filling in the DQ pointer in hisi_sas_task_prep() after we check that the device pointer is still safe to reference. [mkp: typo] Signed-off-by: NXiaofei Tan <tanxiaofei@huawei.com> Signed-off-by: NJohn Garry <john.garry@huawei.com> Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
-
由 Xiang Chen 提交于
The IPTT of a slot is unique, and we currently use hisi_hba lock to protect it. Now slot is managed on hisi_sas_device.list, so use DQ lock to protect for allocating and freeing the slot. Signed-off-by: NXiang Chen <chenxiang66@hisilicon.com> Signed-off-by: NJohn Garry <john.garry@huawei.com> Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
-
由 Xiang Chen 提交于
Currently we lock the DQ to protect whole delivery process. So this stops us building slots for the same queue in parallel, and can affect performance. To optimise it, only lock the DQ during special periods, specifically when allocating a slot from the DQ and when delivering a slot to the HW. This approach is now safe, thanks to the previous patches to ensure that we always deliver a slot to the HW once allocated. Signed-off-by: NXiang Chen <chenxiang66@hisilicon.com> Signed-off-by: NJohn Garry <john.garry@huawei.com> Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
-
由 Xiang Chen 提交于
Currently we allocate the slot's memory buffer after allocating the DQ slot. To aid DQ lockout reduction, and allow slots to be built in parallel, move this step (which can fail) prior to allocating the slot. Also a stray spin_unlock_irqrestore() is removed from internal task exec function. Signed-off-by: NXiang Chen <chenxiang66@hisilicon.com> Signed-off-by: NJohn Garry <john.garry@huawei.com> Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
-
由 Xiang Chen 提交于
Since the task prep functions now should not fail, adjust the return types to void. In addition, some checks in the task prep functions are relocated to the main module; this is specifically the check for the number of elements in an sg list exceeded the HW SGE limit. Signed-off-by: NXiang Chen <chenxiang66@hisilicon.com> Signed-off-by: NJohn Garry <john.garry@huawei.com> Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
-
由 Xiang Chen 提交于
Currently we use DQ lock to protect delivery of DQ entry one by one. To optimise to allow more than one slot to be built for a single DQ in parallel, we need to remove the DQ lock when preparing slots, prior to delivery. To achieve this, we rearrange the slot build order to ensure that once we allocate a slot for a task, we do cannot fail to deliver the task. In this patch, we rearrange the slot building for SMP tasks to ensure that sg mapping part (which can fail) happens before we allocate the slot in the DQ. Signed-off-by: NXiang Chen <chenxiang66@hisilicon.com> Signed-off-by: NJohn Garry <john.garry@huawei.com> Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
-