Signed-off-by: NYan, Zheng <zheng.z.yan@intel.com>
Reviewed-by: NSage Weil <sage@inktank.com>

Signed-off-by: NYan, Zheng <zheng.z.yan@intel.com>
Reviewed-by: NSage Weil <sage@inktank.com>

skip dentries that were added before MDS issued FILE_SHARED to
client.
Signed-off-by: NYan, Zheng <zheng.z.yan@intel.com>
Reviewed-by: NSage Weil <sage@inktank.com>

Dump pool {read,write}_tier to debugfs.  While at it, fixup printk type
specifiers and remove the unnecessary cast to unsigned long long.
Signed-off-by: NIlya Dryomov <ilya.dryomov@inktank.com>

Similar to osd weights, output primary affinity values on incremental
osdmap updates.
Signed-off-by: NIlya Dryomov <ilya.dryomov@inktank.com>

Signed-off-by: NYan, Zheng <zheng.z.yan@intel.com>

Signed-off-by: NYan, Zheng <zheng.z.yan@intel.com>

ceph_atomic_open() calls ceph_open() after receiving the MDS reply.
ceph_open() grabs an extra open file reference. (The open request
already holds an open file reference)
Signed-off-by: NYan, Zheng <zheng.z.yan@intel.com>

Preallocate buffer for readdir reply. Limit number of entries in
readdir reply according to the buffer size.
Signed-off-by: NYan, Zheng <zheng.z.yan@intel.com>

Announce our support for osdmaps with non-default primary affinity
values.
Signed-off-by: NIlya Dryomov <ilya.dryomov@inktank.com>
Reviewed-by: NAlex Elder <elder@linaro.org>

Reimplement ceph_calc_pg_primary() in terms of ceph_calc_pg_acting()
and get rid of the now unused calc_pg_raw().
Signed-off-by: NIlya Dryomov <ilya.dryomov@inktank.com>
Reviewed-by: NAlex Elder <elder@linaro.org>

Respond to non-default primary_affinity values accordingly.  (Primary
affinity allows the admin to shift 'primary responsibility' away from
specific osds, effectively shifting around the read side of the
workload and whatever overhead is incurred by peering and writes by
virtue of being the primary).
Signed-off-by: NIlya Dryomov <ilya.dryomov@inktank.com>
Reviewed-by: NAlex Elder <elder@linaro.org>

Change apply_temp() to override primary in the same way pg_temp
overrides osd set.  primary_temp overrides pg_temp primary too.
Signed-off-by: NIlya Dryomov <ilya.dryomov@inktank.com>
Reviewed-by: NAlex Elder <elder@linaro.org>

In preparation for adding support for primary_temp, stop assuming
primaryness: add a primary out parameter to ceph_calc_pg_acting() and
change call sites accordingly.  Primary is now specified separately
from the order of osds in the set.
Signed-off-by: NIlya Dryomov <ilya.dryomov@inktank.com>
Reviewed-by: NAlex Elder <elder@linaro.org>

Switch ceph_calc_pg_acting() to new helpers: pg_to_raw_osds(),
raw_to_up_osds() and apply_temps().
Signed-off-by: NIlya Dryomov <ilya.dryomov@inktank.com>
Reviewed-by: NAlex Elder <elder@linaro.org>

apply_temp() helper for applying various temporary mappings (at this
point only pg_temp mappings) to the up set, therefore transforming it
into an acting set.
Signed-off-by: NIlya Dryomov <ilya.dryomov@inktank.com>
Reviewed-by: NAlex Elder <elder@linaro.org>

pg_to_raw_osds() helper for computing a raw (crush) set, which can
contain non-existant and down osds.

raw_to_up_osds() helper for pruning non-existant and down osds from the
raw set, therefore transforming it into an up set, and determining up
primary.
Signed-off-by: NIlya Dryomov <ilya.dryomov@inktank.com>
Reviewed-by: NAlex Elder <elder@linaro.org>

Bring in pg_pool_t::can_shift_osds() counterpart along with pool type
defines.
Signed-off-by: NIlya Dryomov <ilya.dryomov@inktank.com>
Reviewed-by: NAlex Elder <elder@linaro.org>

Sync up with ceph.git definitions.  Bring in ceph_osd_is_down().
Signed-off-by: NIlya Dryomov <ilya.dryomov@inktank.com>
Reviewed-by: NAlex Elder <elder@linaro.org>

Announce our support for "new" (v7 - split and separately versioned
client and osd sections) osdmap enconding.
Signed-off-by: NIlya Dryomov <ilya.dryomov@inktank.com>
Reviewed-by: NAlex Elder <elder@linaro.org>

Add two helpers to decode primary_affinity (full map, vector<u32>) and
new_primary_affinity (inc map, map<u32, u32>) and switch to them.
Signed-off-by: NIlya Dryomov <ilya.dryomov@inktank.com>
Reviewed-by: NAlex Elder <elder@linaro.org>

Add primary_affinity infrastructure.  primary_affinity values are
stored in an max_osd-sized array, hanging off ceph_osdmap, similar to
a osd_weight array.

Introduce {get,set}_primary_affinity() helpers, primarily to return
CEPH_OSD_DEFAULT_PRIMARY_AFFINITY when no affinity has been set and to
abstract out osd_primary_affinity array allocation and initialization.
Signed-off-by: NIlya Dryomov <ilya.dryomov@inktank.com>
Reviewed-by: NAlex Elder <elder@linaro.org>

Add a common helper to decode both primary_temp (full map, map<pg_t,
u32>) and new_primary_temp (inc map, same) and switch to it.
Signed-off-by: NIlya Dryomov <ilya.dryomov@inktank.com>
Reviewed-by: NAlex Elder <elder@linaro.org>

Add primary_temp mappings infrastructure.  struct ceph_pg_mapping is
overloaded, primary_temp mappings are stored in an rb-tree, rooted at
ceph_osdmap, in a manner similar to pg_temp mappings.

Dump primary_temp mappings to /sys/kernel/debug/ceph/<client>/osdmap,
one 'primary_temp <pgid> <osd>' per line, e.g:

    primary_temp 2.6 4
Signed-off-by: NIlya Dryomov <ilya.dryomov@inktank.com>
Reviewed-by: NAlex Elder <elder@linaro.org>

In preparation for adding support for primary_temp mappings, generalize
struct ceph_pg_mapping so it can hold mappings other than pg_temp.
Signed-off-by: NIlya Dryomov <ilya.dryomov@inktank.com>
Reviewed-by: NAlex Elder <elder@linaro.org>

Full and incremental osdmaps are structured identically and have
identical headers.  Add a helper to decode both "old" (16-bit version,
v6) and "new" (8-bit struct_v+struct_compat+struct_len, v7) osdmap
enconding headers and switch to it.
Signed-off-by: NIlya Dryomov <ilya.dryomov@inktank.com>
Reviewed-by: NAlex Elder <elder@linaro.org>

Consolidate pg_temp (full map, map<pg_t, vector<u32>>) and new_pg_temp
(inc map, same) decoding logic into a common helper and switch to it.
Signed-off-by: NIlya Dryomov <ilya.dryomov@inktank.com>
Reviewed-by: NAlex Elder <elder@linaro.org>

Use krealloc() instead of rolling our own.  (krealloc() with a NULL
first argument acts as a kmalloc()).  Properly initalize the new array
elements.  This is needed to make future additions to osdmap easier.
Signed-off-by: NIlya Dryomov <ilya.dryomov@inktank.com>
Reviewed-by: NAlex Elder <elder@linaro.org>

Consolidate pools (full map, map<u64, pg_pool_t>) and new_pools (inc
map, same) decoding logic into a common helper and switch to it.
Signed-off-by: NIlya Dryomov <ilya.dryomov@inktank.com>
Reviewed-by: NAlex Elder <elder@linaro.org>

To be in line with all the other osdmap decode helpers.
Signed-off-by: NIlya Dryomov <ilya.dryomov@inktank.com>
Reviewed-by: NAlex Elder <elder@linaro.org>

Sum up sizeof(...) results instead of (incorrectly) hard-coding the
number of bytes, expressed in ints and longs.
Signed-off-by: NIlya Dryomov <ilya.dryomov@inktank.com>
Reviewed-by: NAlex Elder <elder@linaro.org>

Only version 6 of osdmap encoding is supported, anything other than
version 6 results in an error and halts the decoding process.  Checking
if version is >= 5 is therefore bogus.
Signed-off-by: NIlya Dryomov <ilya.dryomov@inktank.com>
Reviewed-by: NAlex Elder <elder@linaro.org>

The existing error handling scheme requires resetting err to -EINVAL
prior to calling any ceph_decode_* macro.  This is ugly and fragile,
and there already are a few places where we would return 0 on error,
due to a missing reset.  Follow osdmap_decode() and fix this by adding
a special e_inval label to be used by all ceph_decode_* macros.
Signed-off-by: NIlya Dryomov <ilya.dryomov@inktank.com>
Reviewed-by: NAlex Elder <elder@linaro.org>

The size of the memory area feeded to crush_decode() should be limited
not only by osdmap end, but also by the crush map length.  Also, drop
unnecessary dout() (dout() in crush_decode() conveys the same info) and
step past crush map only if it is decoded successfully.
Signed-off-by: NIlya Dryomov <ilya.dryomov@inktank.com>
Reviewed-by: NAlex Elder <elder@linaro.org>

Check length of osd_state, osd_weight and osd_addr arrays.  They
should all have exactly max_osd elements after the call to
osdmap_set_max_osd().
Signed-off-by: NIlya Dryomov <ilya.dryomov@inktank.com>
Reviewed-by: NAlex Elder <elder@linaro.org>

max_osd value is not covered by any ceph_decode_need().  Use a safe
version of ceph_decode_* macro to decode it.
Signed-off-by: NIlya Dryomov <ilya.dryomov@inktank.com>
Reviewed-by: NAlex Elder <elder@linaro.org>

The existing error handling scheme requires resetting err to -EINVAL
prior to calling any ceph_decode_* macro.  This is ugly and fragile,
and there already are a few places where we would return 0 on error,
due to a missing reset.  Fix this by adding a special e_inval label to
be used by all ceph_decode_* macros.
Signed-off-by: NIlya Dryomov <ilya.dryomov@inktank.com>
Reviewed-by: NAlex Elder <elder@linaro.org>

Split osdmap allocation and initialization into a separate function,
ceph_osdmap_decode().
Signed-off-by: NIlya Dryomov <ilya.dryomov@inktank.com>
Reviewed-by: NAlex Elder <elder@linaro.org>

Dump osdmap in hex on both full and incremental decode errors, to make
it easier to match the contents with error offset.  dout() map epoch
and max_osd value on success.
Signed-off-by: NIlya Dryomov <ilya.dryomov@inktank.com>
Reviewed-by: NAlex Elder <elder@linaro.org>

Dump pg_temp mappings to /sys/kernel/debug/ceph/<client>/osdmap,
one 'pg_temp <pgid> [<osd>, ..., <osd>]' per line, e.g:

    pg_temp 2.6 [2,3,4]
Signed-off-by: NIlya Dryomov <ilya.dryomov@inktank.com>
Reviewed-by: NAlex Elder <elder@linaro.org>