The current GPL only licensing on the DTSI makes it very impractical for other
software components licensed under another license.

In order to make it easier for them to reuse our device trees, relicense our
device trees under a GPL/X11 dual-license.
Signed-off-by: NMaxime Ripard <maxime.ripard@free-electrons.com>
Acked-by: NCarlo Caione <carlo@caione.org>
Acked-by: NEmilio López <emilio@elopez.com.ar>
Acked-by: NHans de Goede <hdegoede@redhat.com>
Acked-by: NOlliver Schinagl <oliver@schinagl.nl>
Acked-by: NOlof Johansson <olof@lixom.net>
Acked-by: NRoman Byshko <rbyshko@gmail.com>
Acked-by: NStefan Roese <sr@denx.de>

The current GPL only licensing on the DTSI makes it very impractical for other
software components licensed under another license.

In order to make it easier for them to reuse our device trees, relicense our
device trees under a GPL/X11 dual-license.
Signed-off-by: NMaxime Ripard <maxime.ripard@free-electrons.com>
Acked-by: NCarlo Caione <carlo@caione.org>
Acked-by: NEmilio López <emilio@elopez.com.ar>
Acked-by: NHans de Goede <hdegoede@redhat.com>
Acked-by: NOlliver Schinagl <oliver@schinagl.nl>
Acked-by: NOlof Johansson <olof@lixom.net>
Acked-by: NRoman Byshko <rbyshko@gmail.com>
Acked-by: NStefan Roese <sr@denx.de>

Tested on a cubieboard and the mini-x.
Signed-off-by: NHans de Goede <hdegoede@redhat.com>
Signed-off-by: NMaxime Ripard <maxime.ripard@free-electrons.com>

At a node for the axp209, and where necessary the i2c controller to the dts
for various boards. Note the axp209 regulators are omitted as we don't have
any use for them yet, and on some boards were not sure how exactly they are
wired up.

Adding support for just the axp209 without the regulators is still useful, as
it will give us power-button and poweroff support.
Signed-off-by: NCarlo Caione <carlo@caione.org>
[hdegoede@redhat.com: Drop the regulator bits for now]
Signed-off-by: NHans de Goede <hdegoede@redhat.com>
Signed-off-by: NMaxime Ripard <maxime.ripard@free-electrons.com>

Signed-off-by: NHans de Goede <hdegoede@redhat.com>
Signed-off-by: NMaxime Ripard <maxime.ripard@free-electrons.com>

Tested on a subset of these boards, for the others boards the settings match
the ones of the tested boards according to the original firmware fex files.
Signed-off-by: NHans de Goede <hdegoede@redhat.com>
Signed-off-by: NMaxime Ripard <maxime.ripard@free-electrons.com>

Add nodes for the usb-phy and ehci- and ohci-usb-host controllers.
Signed-off-by: NRoman Byshko <rbyshko@gmail.com>
Signed-off-by: NHans de Goede <hdegoede@redhat.com>
Signed-off-by: NMaxime Ripard <maxime.ripard@free-electrons.com>

This patch adds sunxi sata support to A10 boards that have such a connector.
Some boards also feature a regulator via a GPIO and support for this is also
added.
Signed-off-by: NOlliver Schinagl <oliver@schinagl.nl>
Signed-off-by: NHans de Goede <hdegoede@redhat.com>
Signed-off-by: NMaxime Ripard <maxime.ripard@free-electrons.com>

The chosen nodes are nowadays pretty useless, since they will be overriden by
the bootloader anyway.

We can thus safely remove them.
Signed-off-by: NMaxime Ripard <maxime.ripard@free-electrons.com>

The aliases are shared across boards are really belong to the DTSI.
Move them there.
Signed-off-by: NMaxime Ripard <maxime.ripard@free-electrons.com>

There was a typo in the base address used for the soc node in the A10
device tree. Fix it with the proper base address.
Signed-off-by: NMaxime Ripard <maxime.ripard@free-electrons.com>

Quoting from Documentation/leds/leds-class.txt:

    LED Device Naming
    =================

    Is currently of the form:

    "devicename:colour:function"
Signed-off-by: NEmilio López <emilio@elopez.com.ar>
Signed-off-by: NMaxime Ripard <maxime.ripard@free-electrons.com>

The Cubieboard makes use of the first two i2c controllers found on the
Allwinner A10; i2c-0 is used internally for the PMIC, while i2c-1
is exposed on the board headers. This patch enables them in the device
tree.
Signed-off-by: NEmilio López <emilio@elopez.com.ar>
Signed-off-by: NMaxime Ripard <maxime.ripard@free-electrons.com>
Reviewed-by: NTomasz Figa <tomasz.figa@gmail.com>

Signed-off-by: NStefan Roese <sr@denx.de>
Signed-off-by: NMaxime Ripard <maxime.ripard@free-electrons.com>
Tested-by: NRichard Genoud <richard.genoud@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

In the early days, the A10 and A13 shared quite some code. Nowadays it
shares less and less code, the A31 diverging even more, so it doesn't
make much sense to continue to maintain this structure, just use one
DTSI for every SoC, and that's it.
Signed-off-by: NMaxime Ripard <maxime.ripard@free-electrons.com>

We previously relied on the bootloader to do the muxing of the UART for
the Cubieboard. Don't rely on it anymore and use pinctrl.

Also remove uart1, as it is not enabled by default and it's not exposed
on the board headers.
Signed-off-by: NEmilio López <emilio@elopez.com.ar>
Signed-off-by: NMaxime Ripard <maxime.ripard@free-electrons.com>

The other architecture use serial@address for their uart nodes, so
rename our uart dt nodes to be consistent
Signed-off-by: NMaxime Ripard <maxime.ripard@free-electrons.com>

Cubieboard has two LEDs available for use, a blue one (labeled LED1)
and a green one (labeled LED2).
Signed-off-by: NEmilio López <emilio@elopez.com.ar>
Signed-off-by: NMaxime Ripard <maxime.ripard@free-electrons.com>

This reverts commit 0749a442.

The patch caused a build problem in allyesconfig by referencing an
undefined device tree label 'pio'.
Signed-off-by: NArnd Bergmann <arnd@arndb.de>

Cubieboard has two LEDs available for use, a blue one (labeled LED1)
and a green one (labeled LED2).
Signed-off-by: NEmilio López <emilio@elopez.com.ar>
Signed-off-by: NMaxime Ripard <maxime.ripard@free-electrons.com>

This is the rename portion of "ARM: sunxi: Change device tree naming
scheme for sunxi" that were missed when the patch was applied.
Signed-off-by: NOlof Johansson <olof@lixom.net>

There is several different SoCs sharing the sun5i codename: A10s, A12
and A13. Since there is enough differences to not consider those the
same SoCs, change a bit the naming scheme to reflect this.

Moreover, some boards like the olinuxino come in A10s and A13 variants,
which also share the same SoC codename.

So change the naming scheme to reflect both the codename and the market
name of the SoCs used in the dtsi and in the board files
Signed-off-by: NMaxime Ripard <maxime.ripard@free-electrons.com>
Acked-by: NArnd Bergmann <arnd@arndb.de>
Signed-off-by: NOlof Johansson <olof@lixom.net>

This patch adds support for the Cubieboard based on the Allwinner
A10/sun4i SoC. Currently only UART is supported. Other devices
will eventually follow.
Signed-off-by: NStefan Roese <sr@denx.de>
Acked-by: NArnd Bergmann <arnd@arndb.de>
Signed-off-by: NMaxime Ripard <maxime.ripard@free-electrons.com>

For the new sun4i/Cubieboard (A10) support, lets re-strucure the
sun5i dts files to make it more generic. Those are the new
dts/dtsi files:

sunxi.dtsi - Devices common to all Allwinner sunXi SoC's
sun4i.dtsi - sun4i Devices, will include sunxi.dtsi
sun5i.dtsi - sun5i Devices, will include sunxi.dtsi
board.dts - will include either sun4i.dtsi or sun5i.dtsi

Additionally the "duart" label in the olinuxino.dts is changed to
"uart1".
Signed-off-by: NStefan Roese <sr@denx.de>
Acked-by: NArnd Bergmann <arnd@arndb.de>
Signed-off-by: NMaxime Ripard <maxime.ripard@free-electrons.com>

Signed-off-by: NMaxime Ripard <maxime.ripard@free-electrons.com>

The headers that are only used by board files do not necessarily
need to be in plat-mxc/include/mach.  Move them to the same place
as those board files.
Signed-off-by: NShawn Guo <shawn.guo@linaro.org>
Acked-by: NSascha Hauer <s.hauer@pengutronix.de>
Acked-by: NArnd Bergmann <arnd@arndb.de>

Change mxc_expio_init interface a little bit to have gpio than irq
number passed in.  With the change, gpio_to_irq can be called inside
mxc_expio_init to get irq number, so that MXC_IRQ_TO_GPIO can be
removed.
Signed-off-by: NShawn Guo <shawn.guo@linaro.org>
Acked-by: NSascha Hauer <s.hauer@pengutronix.de>
Acked-by: NDong Aisheng <dong.aisheng@linaro.org>

The debug board is little different for all mxc 3-stack(PDK)
platforms, it is possible here to add a common implementation to
support this board.
Signed-off-by: NJason Wang <jason77.wang@gmail.com>
Signed-off-by: NSascha Hauer <s.hauer@pengutronix.de>

Makes it consistent with VMALLOC_START
Tested-by: NH Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: NAndreas Fenkart <andreas.fenkart@streamunlimited.com>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Shared (platform) headers
Signed-off-by: Ndmitry pervushin <dpervushin@embeddedalley.com>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>