Latest Debian policy is 3.8.1.
Even if we are not yet compliant to it strive for the latest.
Signed-off-by: Nmaximilian attems <max@stro.at>
Signed-off-by: NFrans Pop <elendil@planet.nl>
Acked-by: NAndres Salomon <dilinger@debian.org>
Signed-off-by: NSam Ravnborg <sam@ravnborg.org>

Section "base" has been removed, the base is defined by Priority field.

For Squeeze the section should be "kernel", but as that's not yet
supported for Sarge and Etch we stay with admin for now.
Signed-off-by: Nmaximilian attems <max@stro.at>
Signed-off-by: NFrans Pop <elendil@planet.nl>
Cc: Andres Salomon <dilinger@debian.org>
Signed-off-by: NSam Ravnborg <sam@ravnborg.org>

kernel-image naming has been dropped for the Lenny release
and was only transitional for Etch.

As it builds modules it provides linux-modules-$version.
Signed-off-by: Nmaximilian attems <max@stro.at>
Signed-off-by: NFrans Pop <elendil@planet.nl>
Cc: Andres Salomon <dilinger@debian.org>
Signed-off-by: NSam Ravnborg <sam@ravnborg.org>

The binary package that make deb-pkg creates is a linux-image.
To be fixed may also be the addition of $DEB_ARCH.
Signed-off-by: Nmaximilian attems <max@stro.at>
Signed-off-by: NFrans Pop <elendil@planet.nl>
Cc: Andres Salomon <dilinger@debian.org>
Signed-off-by: NSam Ravnborg <sam@ravnborg.org>

The Source: field is defined as the source package in the package
archive from which a binary packages are built. As deb-pkg does not
generate a source package, we should avoid to use any existing source
packages here.
Signed-off-by: NFrans Pop <elendil@planet.nl>
Acked-by: Nmaximilian attems <max@stro.at>
Cc: Andres Salomon <dilinger@debian.org>
Signed-off-by: NSam Ravnborg <sam@ravnborg.org>

Try harder to find email and maintainer name.
Debian's own devscripts all use DEBEMAIL or DEBFULLNAME prior to an
eventual EMAIL or NAME environment variable. Match their logic.

"Anonymous" sounds nicer then "Kernel Compiler" if no name is found.
Signed-off-by: Nmaximilian attems <max@stro.at>
Signed-off-by: NFrans Pop <elendil@planet.nl>
Cc: Andres Salomon <dilinger@debian.org>
Signed-off-by: NSam Ravnborg <sam@ravnborg.org>

On Thursday 23 April 2009, Frans Pop wrote:
Add a basic debian/copyright to the binary packages.

Based on an earlier patch from Maximilian Attems.
Signed-off-by: NFrans Pop <elendil@planet.nl>
Acked-by: Nmaximilian attems <max@stro.at>
Cc: Andres Salomon <dilinger@debian.org>
Signed-off-by: NSam Ravnborg <sam@ravnborg.org>

Signed-off-by: NFrans Pop <elendil@planet.nl>
Acked-by: Nmaximilian attems <max@stro.at>
Cc: Andres Salomon <dilinger@debian.org>
Signed-off-by: NSam Ravnborg <sam@ravnborg.org>

Hook scripts in the default directory /etc/kernel are also executed by
official Debian kernel packages as well as kernel packages created using
make-kpkg. Allow to specify an alternative hook scripts directory by
exporting the environment variable KDEB_HOOKDIR.
Signed-off-by: NFrans Pop <elendil@planet.nl>
Acked-by: Nmaximilian attems <max@stro.at>
Cc: Andres Salomon <dilinger@debian.org>
Signed-off-by: NSam Ravnborg <sam@ravnborg.org>

Allow to specify a custom revision for the generated .deb by
exporting the environment variable KDEB_PKGVERSION.
Signed-off-by: NFrans Pop <elendil@planet.nl>
Acked-by: Nmaximilian attems <max@stro.at>
Cc: Andres Salomon <dilinger@debian.org>
Signed-off-by: NSam Ravnborg <sam@ravnborg.org>

The Debian packaging scripts created by the deb-pkg target do not pass
on the standard Debian maintainer script parameters to hook scripts,
which means that those scripts cannot tell whether they are being called
during e.g. install vs. upgrade, or removal vs. purge of the package.

As there are several variantions in how hook scripts are called from
kernel packages, we pass the parameters in the environment variable
DEB_MAINT_PARAMS rather than as extra arguments.

Bump version of builddep script to 1.3.
Signed-off-by: NFrans Pop <elendil@planet.nl>
Acked-by: Nmaximilian attems <max@stro.at>
Cc: Andres Salomon <dilinger@debian.org>
Signed-off-by: NSam Ravnborg <sam@ravnborg.org>

Not all architectures prepend the $(boot) path in $(KBUILD_IMAGE).
Allow for that fact in the builddeb script. Example is arm.
Signed-off-by: NFrans Pop <elendil@planet.nl>
Acked-by: Nmaximilian attems <max@stro.at>
Cc: Andres Salomon <dilinger@debian.org>
Signed-off-by: NSam Ravnborg <sam@ravnborg.org>

Factor out code to build package into separate function and
only write "source" section for the debian/control file once.
Signed-off-by: NFrans Pop <elendil@planet.nl>
Acked-by: Nmaximilian attems <max@stro.at>
Cc: Andres Salomon <dilinger@debian.org>
Signed-off-by: NSam Ravnborg <sam@ravnborg.org>

Minor coding style improvements and typo fix in leading comment.
Signed-off-by: NFrans Pop <elendil@planet.nl>
Cc: Andres Salomon <dilinger@debian.org>
Acked-by: Nmaximilian attems <max@stro.at>
Signed-off-by: NSam Ravnborg <sam@ravnborg.org>

Signed-off-by: NHelge Deller <deller@gmx.de>
Signed-off-by: NKyle McMartin <kyle@mcmartin.ca>

Running 'make rpm' fails when CONFIG_LOCALVERSION_AUTO=y and using a kernel source
tree under SCM.  This is due to KERNELRELEASE being different when the initial make
is run and when make is run from rpmbuild.

mkspec creates kernel.spec using KERNELRELEASE:

<mkspec>
echo "%files"
echo '%defattr (-, root, root)'
echo "%dir /lib/modules"
echo "/lib/modules/$KERNELRELEASE"
echo "/lib/firmware"
echo "/boot/*"
echo ""
</mkspec>

When CONFIG_LOCALVERSION_AUTO=y scripts/setlocalversion is called and grabs any
additional version info from SCM.  Next, the srctree is tarred up and SCM
information is excluded.

rpmbuild reruns make and in the process generates a new include/config/kernel.release
and thus a new KERNELRELEASE.  However this time the SCM information is gone so
KERNELRELEASE no longer has the additional version information.  When "make modules_install"
runs, it uses the new KERNELRELEASE value to determine where to install the modules.
This conflicts with where the spec file assumes they are going because of the
mis-matching KERNELRELEASE versions.

<snippet>
+ INSTALL_MOD_PATH=/var/tmp/kernel-2.6.29rc4tip01479g5d85422-root
+ make -j16 modules_install
  INSTALL crypto/aead.ko
  INSTALL crypto/cbc.ko
  INSTALL crypto/chainiv.ko
  INSTALL crypto/crc32c.ko
  INSTALL crypto/crypto_algapi.ko
  INSTALL crypto/crypto_blkcipher.ko
  INSTALL crypto/crypto_hash.ko
  INSTALL crypto/cryptomgr.ko
  INSTALL crypto/ecb.ko
  INSTALL crypto/eseqiv.ko
  INSTALL crypto/krng.ko
  INSTALL crypto/md5.ko
  INSTALL crypto/pcbc.ko
  INSTALL crypto/rng.ko
  INSTALL drivers/block/cciss.ko
  INSTALL drivers/hid/hid-dummy.ko
  INSTALL drivers/scsi/iscsi_tcp.ko
  INSTALL drivers/scsi/libiscsi.ko
  INSTALL drivers/scsi/libiscsi_tcp.ko
  INSTALL drivers/scsi/scsi_transport_iscsi.ko
  INSTALL drivers/scsi/scsi_wait_scan.ko
  INSTALL fs/lockd/lockd.ko
  INSTALL fs/nfs/nfs.ko
  INSTALL fs/nfsd/nfsd.ko
  INSTALL lib/libcrc32c.ko
  INSTALL net/sunrpc/sunrpc.ko
  DEPMOD  2.6.29-rc4-tip
+ cp arch/x86/boot/bzImage
/var/tmp/kernel-2.6.29rc4tip01479g5d85422-root/boot/vmlinuz-2.6.29-rc4-tip-01479-g5d85422
+ cp System.map
/var/tmp/kernel-2.6.29rc4tip01479g5d85422-root/boot/System.map-2.6.29-rc4-tip-01479-g5d85422
+ cp .config
/var/tmp/kernel-2.6.29rc4tip01479g5d85422-root/boot/config-2.6.29-rc4-tip-01479-g5d85422
+ cp vmlinux vmlinux.orig
+ bzip2 -9 vmlinux
+ mv vmlinux.bz2
/var/tmp/kernel-2.6.29rc4tip01479g5d85422-root/boot/vmlinux-2.6.29-rc4-tip-01479-g5d85422.bz2
+ mv vmlinux.orig vmlinux
+ /usr/lib/rpm/brp-compress
Processing files: kernel-2.6.29rc4tip01479g5d85422-2
error: File not found:
/var/tmp/kernel-2.6.29rc4tip01479g5d85422-root/lib/modules/2.6.29-rc4-tip-01479-g5d85422

RPM build errors:
    File not found:
/var/tmp/kernel-2.6.29rc4tip01479g5d85422-root/lib/modules/2.6.29-rc4-tip-01479-g5d85422
make[1]: *** [rpm] Error 1
make: *** [rpm] Error 2
</snippet>

I have tested this patch on git -tip, Linus' git tree, and the kernel.org tar files, both
with and without CONFIG_LOCALVERSION_AUTO=y.
Signed-off-by: NJosh Hunt <josh@scalex86.org>
Signed-off-by: NSam Ravnborg <sam@ravnborg.org>
----

The contents of the %clean section in mkspec is currently commented
out leaving RPM_BUILD_ROOT and its contents on the build machine.
This patch removes it once the rpm build process is complete.
Signed-off-by: NJosh Hunt <josh@scalex86.org>
Signed-off-by: NSam Ravnborg <sam@ravnborg.org>

We are building an automated system to test kernels weekly and need to
provide an rpm to our QA dept.  We would like to use the ability to create
kernel rpms already in the kernel's Makefile, but need the vmlinux file
included in the rpm for later debugging.

This patch adds a compressed vmlinux to the kernel rpm when doing a
make rpm-pkg or binrpm-pkg and upon install places the vmlinux file in /boot.
Signed-off-by: NJosh Hunt <josh@scalex86.org>
Signed-off-by: NSam Ravnborg <sam@ravnborg.org>

Given that there is no usage of a TAR_IGNORE variable remove it
Signed-off-by: NRobert P. J. Day <rpjday@crashcourse.ca>
Signed-off-by: NSam Ravnborg <sam@ravnborg.org>

Add a RPMOPTS make variable to allow arbitrary options to be passed
to rpm during 'make rpm-pkg'. For example:

 make RPMOPTS="--define '_topdir /home/jk/rpm'" rpm-pkg
Signed-off-by: NJeremy Kerr <jk@ozlabs.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NSam Ravnborg <sam@ravnborg.org>

The below is a simplistic fix for "make deb-pkg"; it splits the
firmware out to a linux-firmware-image package and adds an
(unversioned) Suggests to the linux package for this firmware.
Signed-Off-By: NJonathan McDowell <noodles@earth.li>
Acked-by: NFrans Pop <elendil@planet.nl>
Signed-off-by: NSam Ravnborg <sam@ravnborg.org>

Currently, if we do a 'make rpm-pkg' without the _smp_mflags rpm macro
defined, the build fails with:

  [snip]
  Executing(%build): /bin/bash -e /var/tmp/rpm-tmp.67959
  + umask 022
  + cd /home/jk/devel/kernel-snapshot/rpm/BUILD
  + cd kernel-2.6.26
  + make clean
  + make '%{_smp_mflags}'
  make[3]: *** No rule to make target `%{_smp_mflags}'.  Stop.
  error: Bad exit status from /var/tmp/rpm-tmp.67959 (%build)

This change uses the 'null if not set' reference to the _smp_mflags
macro instead.
Signed-off-by: NJeremy Kerr <jk@ozlabs.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NSam Ravnborg <sam@ravnborg.org>

This is patch to fix incorrect mkspec script to make rpm correctly at 2.6.27 vanilla kernel.
This is regression in 2.6.27. 2.6.26 make rpm work good.
In 2.6.27 'make rpm' say error from rpmbuild "Many unpacked files (*.fw)."
Signed-off-by: NEvgeniy Manachkin <sfstudio@mail.ru>
Acked-by: NAlan Cox <alan@redhat.com>
Signed-off-by: NSam Ravnborg <sam@ravnborg.org>
Cc: Stable <stable@kernel.org>

If CONIFIG_LOCALVERSION is set for example to -loop, the following error
message was generated.

dpkg-deb - error: Debian revision (`loop') doesn't contain any digits
dpkg-deb: 1 errors in control file

The patch solves this by adding a numeric revision to package version.
Signed-off-by: NMichal Sojka <sojkam1@fel.cvut.cz>
Signed-off-by: NSam Ravnborg <sam@ravnborg.org>

Signed-off-by: NDaniel De Graaf <danieldegraaf@gmail.com>
Signed-off-by: NSam Ravnborg <sam@ravnborg.org>

Signed-off-by: NRobert P. J. Day <rpjday@crashcourse.ca>
Signed-off-by: NSam Ravnborg <sam@ravnborg.org>

http://bugzilla.kernel.org/show_bug.cgi?id=8941

Current Debian's kernel-modules depend on matching linux-image-$version, though
Linux's make deb-pkg build a .deb that 'Provides: kernel-image-$version' only.
The following patch adds the Debian-compliant 'Provides', leaving the default
one; hopely this will make way all happy.
Signed-off-by: Npaolo <oopla@users.sf.net>
Signed-off-by: NSam Ravnborg <sam@ravnborg.org>

Signed-off-by: NAndi Kleen <ak@suse.de>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

"mkdir -p" does not only mean not to complain if the directory already
exists, but also to create the parent directories if needed. This patch
removes "lib" from the list of directories to create as we will also create
"lib/modules".
Signed-off-by: NRolf Eike Beer <eike-kernel@sf-tec.de>
Signed-off-by: NSam Ravnborg <sam@ravnborg.org>

The default target for most powerpc platforms is zImage.  The
zImage however is in arch/powerpc/boot and the mkspec script
was set up to get the kernel from the top level of the kernel
tree.  This patch copies vmlinux to arch/powerpc/boot and then
copies the kernel to the tmp directory so the rpm can be made.
Signed-off-by: NMike Wolf <mjw@us.ibm.com>
Signed-off-by: NSam Ravnborg <sam@ravnborg.org>

.PHONY: does not take patterns so use FORCE to achive same effect.
Thanks to "Paul D. Smith" <psmith@gnu.org> for noticing this.
Signed-off-by: NSam Ravnborg <sam@ravnborg.org>

The kbuild system takes advantage of an incorrect behavior in GNU make.
Once this behavior is fixed, all files in the kernel rebuild every time,
even if nothing has changed.  This patch ensures kbuild works with both
the incorrect and correct behaviors of GNU make.

For more details on the incorrect behavior, see:

http://lists.gnu.org/archive/html/bug-make/2006-03/msg00003.html

Changes in this patch:
  - Keep all targets that are to be marked .PHONY in a variable, PHONY.
  - Add .PHONY: $(PHONY) to mark them properly.
  - Remove any $(PHONY) files from the $? list when determining whether
    targets are up-to-date or not.
Signed-off-by: NPaul Smith <psmith@gnu.org>
Signed-off-by: NSam Ravnborg <sam@ravnborg.org>

Fix out-of-tree builds for the tar-pkg targets

When I wrote the buildtar script, I didn't even think about
out-of-tree builds because I didn't use these back then. This patch
throughoutly uses ${objtree} instead of `pwd`.

Also, the kernel version is no longer manually built. Instead, it will
properly use $KERNELRELEASE .  Installing modules is only done if
CONFIG_MODULES is set.
Signed-off-by: NJan-Benedict Glaw <jbglaw@lug-owl.de>
Signed-off-by: NSam Ravnborg <sam@ravnborg.org>

This fixes kbuild make help binrpm-pkg missing `''.
Signed-off-by: NCoywolf Qi Hunt <coywolf@lovecn.org>
Signed-off-by: NSam Ravnborg <sam@ravnborg.org>

From: Ryan Anderson <ryan@michonline.com>

When running "make O=something deb-pkg", I get a failure that claims I
haven't configured my kernel (I have).  Running it a second time tells
me to run "make mrproper"  (include/linux/version.h got built on the
first run)

Original patch from:
From: Ajay Patel <patela@gmail.com>

With modifications from:
Signed-off-By: NRyan Anderson <ryan@michonline.com>
Signed-off-by: NSam Ravnborg <sam@ravnborg.org>

From: Ryan Anderson <ryan@michonline.com>

This pulls the description from the Debian user-mode-linux package, and
puts $version back in the appropriate places for both descriptions.
Signed-off-by: NRyan Anderson <ryan@michonline.com>
Signed-off-by: NSam Ravnborg <sam@ravnborg.org>

From: Ryan Anderson <ryan@michonline.com>

Make the deb-pkg build target understand the "um" arch and set up the
package and directory structure to match a mainline-Debian style
user-mode-linux package.

This is primarily so that it stops matching, exactly, the naming
convention used by normal, non-UML kernels generated by this command.

Installing "linux-2.6.11" and "linux-2.6.11", where one is a UML kernel
doesn't do the right thing.  This fixes that.
Signed-off-by: NRyan Anderson <ryan@michonline.com>
Signed-off-by: NSam Ravnborg <sam@ravnborg.org>

This patch fixes the output of "make help" to fit in a 80 column
screen. Please push upstream as part of your other patches.
Signed-off-by: NYum Rayan <yum.rayan@gmail.com>
Signed-off-by: NSam Ravnborg <sam@ravnborg.org>

On ia64, only the EFI (fat) partition is available to boot from.  The rpm
needs to install the kernel under /boot/efi to be useable on ia64.
Signed-off-by: NGreg Edwards <edwardsg@sgi.com>
Signed-off-by: NSam Ravnborg <sam@ravnborg.org>

It adds tarball packaging, which I prefer for distribution.
Also one of the two blanks after @echo is removed. One seems to be enough :)
Signed-off-by: NJan-Benedict Glaw <jbglaw@lug-owl.de>
Signed-off-by: NSam Ravnborg <sam@ravnborg.org>