[Why&How]
Since there is no need for accessing crtc state in the interrupt
handler, interrupts need not be disabled well in advance, and
can be moved to commit_tail where it should be.
Reviewed-by: NNicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: NAurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why&How]
Currently commit_tail holds global locks and wait for dependencies which is
against the DRM API contracts. Inorder to fix this, IRQ handler should be able
to run without having to access crtc state. Required parameters are copied over
so that they can be directly accessed from the interrupt handler
Reviewed-by: NNicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: NAurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why&How]
To refactor DM IRQ management, all fields used by IRQ is best moved
to a separate struct so that main amdgpu_crtc struct need not be changed
Location of the new struct shall be in DM
Reviewed-by: NNicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: NAurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Remove the private obj from the internal list before we free aconnector.

[   56.925828] BUG: unable to handle page fault for address: ffff8f84a870a560
[   56.933272] #PF: supervisor read access in kernel mode
[   56.938801] #PF: error_code(0x0000) - not-present page
[   56.944376] PGD 18e605067 P4D 18e605067 PUD 86a614067 PMD 86a4d0067 PTE 800ffff8578f5060
[   56.953260] Oops: 0000 [#1] SMP DEBUG_PAGEALLOC NOPTI
[   56.958815] CPU: 6 PID: 1407 Comm: bash Tainted: G           O      5.9.0-rc2+ #46
[   56.967092] Hardware name: System manufacturer System Product Name/PRIME Z390-A, BIOS 1401 11/26/2019
[   56.977162] RIP: 0010:__list_del_entry_valid+0x31/0xa0
[   56.982768] Code: 00 ad de 55 48 8b 17 4c 8b 47 08 48 89 e5 48 39 c2 74 27 48 b8 22 01 00 00 00 00 ad de 49 39 c0 74 2d 49 8b 30 48 39 fe 75 3d <48> 8b 52 08 48 39 f2 75 4c b8 01 00 00 00 5d c3 48 89 7
[   57.003327] RSP: 0018:ffffb40c81687c90 EFLAGS: 00010246
[   57.009048] RAX: dead000000000122 RBX: ffff8f84ea41f4f0 RCX: 0000000000000006
[   57.016871] RDX: ffff8f84a870a558 RSI: ffff8f84ea41f4f0 RDI: ffff8f84ea41f4f0
[   57.024672] RBP: ffffb40c81687c90 R08: ffff8f84ea400998 R09: 0000000000000001
[   57.032490] R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000006
[   57.040287] R13: ffff8f84ea422a90 R14: ffff8f84b4129a20 R15: fffffffffffffff2
[   57.048105] FS:  00007f550d885740(0000) GS:ffff8f8509600000(0000) knlGS:0000000000000000
[   57.056979] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[   57.063260] CR2: ffff8f84a870a560 CR3: 00000007e5144001 CR4: 00000000003706e0
[   57.071053] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[   57.078849] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[   57.086684] Call Trace:
[   57.089381]  drm_atomic_private_obj_fini+0x29/0x82 [drm]
[   57.095247]  amdgpu_dm_fini+0x83/0x170 [amdgpu]
[   57.100264]  dm_hw_fini+0x23/0x30 [amdgpu]
[   57.104814]  amdgpu_device_fini+0x1df/0x4fe [amdgpu]
[   57.110271]  amdgpu_driver_unload_kms+0x43/0x70 [amdgpu]
[   57.116136]  amdgpu_pci_remove+0x3b/0x60 [amdgpu]
[   57.121291]  pci_device_remove+0x3e/0xb0
[   57.125583]  device_release_driver_internal+0xff/0x1d0
[   57.131223]  device_release_driver+0x12/0x20
[   57.135903]  pci_stop_bus_device+0x70/0xa0
[   57.140401]  pci_stop_and_remove_bus_device_locked+0x1b/0x30
[   57.146571]  remove_store+0x7b/0x90
[   57.150429]  dev_attr_store+0x17/0x30
[   57.154441]  sysfs_kf_write+0x4b/0x60
[   57.158479]  kernfs_fop_write+0xe8/0x1d0
[   57.162788]  vfs_write+0xf5/0x230
[   57.166426]  ksys_write+0x70/0xf0
[   57.170087]  __x64_sys_write+0x1a/0x20
[   57.174219]  do_syscall_64+0x38/0x90
[   57.178145]  entry_SYSCALL_64_after_hwframe+0x44/0xa9
Signed-off-by: Nxinhui pan <xinhui.pan@amd.com>
Acked-by: Feifei Xu <Feifei Xu@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

When amdgpu_display_modeset_create_props() fails, state and
state->context should be freed to prevent memleak. It's the
same when amdgpu_dm_audio_init() fails.
Signed-off-by: NDinghao Liu <dinghao.liu@zju.edu.cn>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why]
In dm_dp_aux_transfer() now, we forget to handle AUX_WR fail cases. We
suppose every write wil get done successfully and hence some AUX
commands might not sent out indeed.

[How]
Check if AUX_WR success. If not, retry it.
Signed-off-by: NWayne Lin <Wayne.Lin@amd.com>
Reviewed-by: NHersen Wu <hersenxs.wu@amd.com>
Acked-by: NRodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[why]
Need a tool to retrigger a virtual hotplug for testing purposes with
force redetection in both DC and DM.

[how]
Emulate handle_hpd_irq for connector as if usermode would trigger
a hotplug. Perform DC link discovery, DM connector update, and
DM force atomic commit.

In order to trigger HPD on the connector user needs to echo 1 into
"trigger_hotplug" debugfs entry on its respective connector.
Signed-off-by: NEryk Brol <eryk.brol@amd.com>
Signed-off-by: NMikita Lipski <mikita.lipski@amd.com>
Reviewed-by: NMikita Lipski <Mikita.Lipski@amd.com>
Acked-by: NEryk Brol <eryk.brol@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[why & how]
Useful entry to understand if link has DSC or FEC capabilities,
implemented to read DPCD caps stored on the link. Better than
manually reading the registers with aux dpcd helper.
Signed-off-by: NEryk Brol <eryk.brol@amd.com>
Signed-off-by: NMikita Lipski <mikita.lipski@amd.com>
Reviewed-by: NMikita Lipski <Mikita.Lipski@amd.com>
Acked-by: NEryk Brol <eryk.brol@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why]
Current function excludes the logic to generate H14b-VSIF. Now it
constructs HF-VSIF only and causes HDMI compliace test fail.

[How]
According to HDMI spec, source devices shall utilize the H14b-VSIF
whenever the signaling capabilities of the H14b-VSIF allow this.

Here keep the logic for HF-VSIF and add H14b-VSIF construction part.
Signed-off-by: NWayne Lin <Wayne.Lin@amd.com>
Reviewed-by: NRoman Li <Roman.Li@amd.com>
Acked-by: NEryk Brol <eryk.brol@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

When amdgpu_display_modeset_create_props() fails, state and
state->context should be freed to prevent memleak. It's the
same when amdgpu_dm_audio_init() fails.
Signed-off-by: NDinghao Liu <dinghao.liu@zju.edu.cn>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why]
In dm_dp_aux_transfer() now, we forget to handle AUX_WR fail cases. We
suppose every write wil get done successfully and hence some AUX
commands might not sent out indeed.

[How]
Check if AUX_WR success. If not, retry it.
Signed-off-by: NWayne Lin <Wayne.Lin@amd.com>
Reviewed-by: NHersen Wu <hersenxs.wu@amd.com>
Acked-by: NRodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

drivers: gpu: amd: Initialize amdgpu_dm_backlight_caps object to 0 in amdgpu_dm_update_backlight_caps

In `amdgpu_dm_update_backlight_caps()`, there is a local
`amdgpu_dm_backlight_caps` object that is filled in by
`amdgpu_acpi_get_backlight_caps()`. However, this object is
uninitialized before the call and hence the subsequent check for
aux_support can fail since it is not initialized by
`amdgpu_acpi_get_backlight_caps()` as well. This change initializes
this local `amdgpu_dm_backlight_caps` object to 0.
Reviewed-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NFurquan Shaikh <furquan@google.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Documentation for sysfs backlight level interface requires that
values in both 'brightness' and 'actual_brightness' files are
interpreted to be in range from 0 to the value given in the
'max_brightness' file.

With amdgpu, max_brightness gives 255, and values written by the user
into 'brightness' are internally rescaled to a wider range. However,
reading from 'actual_brightness' gives the raw register value without
inverse rescaling. This causes issues for various userspace tools such
as PowerTop and systemd that expect the value to be in the correct
range.

Introduce a helper to retrieve internal backlight range. Use it to
reimplement 'convert_brightness' as 'convert_brightness_from_user' and
introduce 'convert_brightness_to_user'.

Bug: https://bugzilla.kernel.org/show_bug.cgi?id=203905
Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1242
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlexander Monakov <amonakov@ispras.ru>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

Add a static inline adev_to_drm() to obtain
the DRM device pointer from an amdgpu_device pointer.
Signed-off-by: NLuben Tuikov <luben.tuikov@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Get the amdgpu_device from the DRM device by use
of an inline function, drm_to_adev(). The inline
function resolves a pointer to struct drm_device
to a pointer to struct amdgpu_device.

v2: Use a typed visible static inline function
    instead of an invisible macro.
Signed-off-by: NLuben Tuikov <luben.tuikov@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

drivers: gpu: amd: Initialize amdgpu_dm_backlight_caps object to 0 in amdgpu_dm_update_backlight_caps

In `amdgpu_dm_update_backlight_caps()`, there is a local
`amdgpu_dm_backlight_caps` object that is filled in by
`amdgpu_acpi_get_backlight_caps()`. However, this object is
uninitialized before the call and hence the subsequent check for
aux_support can fail since it is not initialized by
`amdgpu_acpi_get_backlight_caps()` as well. This change initializes
this local `amdgpu_dm_backlight_caps` object to 0.
Reviewed-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NFurquan Shaikh <furquan@google.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

if other threads have holden the reset lock, recovery will
fail to try_lock. Therefore we introduce atomic hive->in_reset
and adev->in_gpu_reset, to avoid reentering GPU recovery.

v2:
drop "? true : false" in the definition of amdgpu_in_reset
Reviewed-by: NHawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: NDennis Li <Dennis.Li@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Documentation for sysfs backlight level interface requires that
values in both 'brightness' and 'actual_brightness' files are
interpreted to be in range from 0 to the value given in the
'max_brightness' file.

With amdgpu, max_brightness gives 255, and values written by the user
into 'brightness' are internally rescaled to a wider range. However,
reading from 'actual_brightness' gives the raw register value without
inverse rescaling. This causes issues for various userspace tools such
as PowerTop and systemd that expect the value to be in the correct
range.

Introduce a helper to retrieve internal backlight range. Use it to
reimplement 'convert_brightness' as 'convert_brightness_from_user' and
introduce 'convert_brightness_to_user'.

Bug: https://bugzilla.kernel.org/show_bug.cgi?id=203905
Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1242
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlexander Monakov <amonakov@ispras.ru>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[why]
Previously when force enabling DSC on SST display we unknowingly
supressed lane count, which caused DSC to be enabled automatically.

[how]
By adding an additional flag to force enable DSC in dc_dsc.c DSC can
always be enabled with debugfs dsc_clock_en forced to 1

Cc: stable@vger.kernel.org
Signed-off-by: NEryk Brol <eryk.brol@amd.com>
Signed-off-by: NMikita Lipski <mikita.lipski@amd.com>
Reviewed-by: NWenjing Liu <Wenjing.Liu@amd.com>
Acked-by: NRodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why]
with eDP + DP, each display use one pipe. after DP unplugged, eDP switch
from one pipe to two pipes -- pipe split.  dpp1_cm_set_regamma_pwl will
be executed too. The duration from switch single pipe to dual pipes is a
little long which could let eDP enter PSR mode. upon two pipes for eDP
are setup, eDP PHY is disabled. front pipe is not really running to
fetch data from frame buffer. i.e., dchubp is not in normal working
status. execution of hubbub1_wm_change_req_wa may cause p-state warning.

[How]
disable eDP PSR before dc_commit_state. psr is disabled when execute
hubbub1_wm_change_req_wa.
Signed-off-by: NHersen Wu <hersenxs.wu@amd.com>
Reviewed-by: NRoman Li <Roman.Li@amd.com>
Acked-by: NRodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why & How]
change abm config init interface to support multiple ABMs.
Signed-off-by: NYongqiang Sun <yongqiang.sun@amd.com>
Reviewed-by: NChris Park <Chris.Park@amd.com>
Acked-by: NRodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

The whole approach wasn't thought through till the end.

We already had a reset lock like this in the past and it caused the same problems like this one.

Completely revert the patch for now and add individual trylock protection to the hardware access functions as necessary.

This reverts commit df9c8d1a.
Signed-off-by: NChristian König <christian.koenig@amd.com>
Acked-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Since DP-specific information is stored in driver's structures, every
driver needs to implement subconnector property by itself. Display
Core already has the subconnector information, we only need to
expose it through DRM property.

v2:rebase

v3: renamed a function call

Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: David (ChunMing) Zhou <David1.Zhou@amd.com>
Cc: amd-gfx@lists.freedesktop.org
Signed-off-by: NJeevan B <jeevan.b@intel.com>
Signed-off-by: NOleg Vasilev <oleg.vasilev@intel.com>
Tested-by: NOleg Vasilev <oleg.vasilev@intel.com>
Acked-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NMaarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1587732655-17544-5-git-send-email-jeevan.b@intel.com

[Why]
Resuming from suspend, CEA blocks from EDID are not parsed and no video
modes can support YUV420. When this happens, output bpc cannot go over
8-bit with 4K modes on HDMI.

[How]
In amdgpu_dm_update_connector_after_detect(), drm_add_edid_modes() is
called after drm_connector_update_edid_property() to fully parse EDID
and update display info.

Cc: stable@vger.kernel.org
Signed-off-by: NStylon Wang <stylon.wang@amd.com>
Reviewed-by: NNicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: NQingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

This is not longer used as of the latest rework of this
code so drop it to avoid a unused function warning.
Acked-by: NNirmoy Das <nirmoy.das@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why]
Resuming from suspend, CEA blocks from EDID are not parsed and no video
modes can support YUV420. When this happens, output bpc cannot go over
8-bit with 4K modes on HDMI.

[How]
In amdgpu_dm_update_connector_after_detect(), drm_add_edid_modes() is
called after drm_connector_update_edid_property() to fully parse EDID
and update display info.

Cc: stable@vger.kernel.org
Signed-off-by: NStylon Wang <stylon.wang@amd.com>
Reviewed-by: NNicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: NQingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why]
Setting abm level does not correctly update CRTC state. As a result
no surface update is added to dc stream state and triggers warning.

[How]
Correctly update CRTC state when setting abm level property.

CC: Stable <stable@vger.kernel.org>
Signed-off-by: NStylon Wang <stylon.wang@amd.com>
Reviewed-by: NNicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: NEryk Brol <eryk.brol@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why]
Currently navy_flounder is using sienna_cichlid_dmcub.bin.

[How]
Create a seperate define so navy_flounder will use its own firmware.
Signed-off-by: NBhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[why]
Fix naming and return bits rather than bytes per pixel for
naming consistency. Because registers return Bytes per pixel,
but DSC Config structure is expecting bits per pixel as input.
So when returning the value convert from bytes into bits.
Signed-off-by: NEryk Brol <eryk.brol@amd.com>
Signed-off-by: NMikita Lipski <mikita.lipski@amd.com>
Reviewed-by: NMikita Lipski <Mikita.Lipski@amd.com>
Acked-by: NEryk Brol <eryk.brol@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why]
Struct dcn_dsc_state is used for reading current state
and parameters of DSC on a pipe, the target rate parameter
uses bytes per pixel even though its reading BITS_PER_PIXEL
register.

[How]
Changing it to Bits Per Pixel for consistency.
Signed-off-by: NEryk Brol <eryk.brol@amd.com>
Signed-off-by: NMikita Lipski <mikita.lipski@amd.com>
Reviewed-by: NMikita Lipski <Mikita.Lipski@amd.com>
Acked-by: NEryk Brol <eryk.brol@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why]
This was added in the past to solve the issue of not knowing when
to stall for medium and full updates in DM.

Since DC is ultimately decides what requires bandwidth changes we
wanted to make use of it directly to determine this.

The problem is that we can't actually pass any of the stream or surface
updates into DC global validation, so we don't actually check if the new
configuration is valid - we just validate the old existing config
instead and stall for outstanding commits to finish.

There's also the problem of grabbing the DRM private object for
pageflips which can lead to page faults in the case where commits
execute out of order and free a DRM private object state that was
still required for commit tail.

[How]
Now that we reset the plane in DM with the same conditions DC checks
we can have planes go through DC validation and we know when we need
to check and stall based on whether the stream or planes changed.

We mark lock_and_validation_needed whenever we've done this, so just
go back to using that instead of dm_determine_update_type_for_commit.

Since we'll skip resetting the plane for a pageflip we will no longer
grab the DRM private object for pageflips as well, avoiding the
page fault issued caused by pageflipping under load with commits
executing out of order.
Signed-off-by: NNicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: NRodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why]
MEDIUM or FULL updates can require global validation or affect
bandwidth. By treating these all simply as surface updates we aren't
actually passing this through DC global validation.

[How]
There's currently no way to pass surface updates through DC global
validation, nor do I think it's a good idea to change the interface
to accept these.

DC global validation itself is currently stateless, and we can move
our update type checking to be stateless as well by duplicating DC
surface checks in DM based on DRM properties.

We wanted to rely on DC automatically determining this since DC knows
best, but DM is ultimately what fills in everything into DC plane
state so it does need to know as well.

There are basically only three paths that we exercise in DM today:

1) Cursor (async update)
2) Pageflip (fast update)
3) Full pipe programming (medium/full updates)

Which means that anything that's more than a pageflip really needs to
go down path #3.

So this change duplicates all the surface update checks based on DRM
state instead inside of should_reset_plane().

Next step is dropping dm_determine_update_type_for_commit and we no
longer require the old DC state at all for global validation.

Optimization can come later so we don't reset DC planes at all for
MEDIUM udpates and avoid validation, but we might require some extra
checks in DM to achieve this.
Signed-off-by: NNicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: NHersen Wu <hersenxs.wu@amd.com>
Reviewed-by: NRodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why]
So we're not racing with userspace or deadlocking DM.

[How]
These flags are now stored on dm_plane_state itself and acquried and
validated during commit_check, so just use those instead.
Signed-off-by: NNicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: NRodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why]
We're racing with userspace as the flags could potentially change
from when we acquired and validated them in commit_check.

[How]
We unfortunately can't drop this function in its entirety from
prepare_planes since we don't know the afb->address at commit_check
time yet.

So instead of querying new tiling_flags and tmz_surface use the ones
from the plane_state directly.

While we're at it, also update the force_disable_dcc option based
on the state from atomic check.
Signed-off-by: NNicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: NRodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why]
Enabling or disable DCC or switching between tiled and linear formats
can require bandwidth updates.

They're currently skipping all DC validation by being treated as purely
surface updates.

[How]
Treat tiling_flag changes (which encode DCC state) as a condition for
resetting the plane.
Signed-off-by: NNicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: NHersen Wu <hersenxs.wu@amd.com>
Reviewed-by: NRodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why]
Store these in advance so we can reuse them later in commit_tail without
having to reserve the fbo again.

These will also be used for checking for tiling changes when deciding
to reset the plane or not.

[How]
This change should mostly be a refactor. Only commit check is affected
for now and I'll drop the get_fb_info calls in prepare_planes and
commit_tail after.

This runs a prepass loop once we think that all planes have been added
to the context and replaces the get_fb_info calls with accessing the
dm_plane_state instead.
Signed-off-by: NNicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: NRodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

On an error exit path, a negative error code should be returned
instead of a positive return value.

Fixes: 9e869063 ("drm/amd/display: Move iteration out of dm_update_planes")
Cc: Leo Li <sunpeng.li@amd.com>
Signed-off-by: NTianjia Zhang <tianjia.zhang@linux.alibaba.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[why]
There's currently no method to enable multi-stream synchronization from
userspace and we don't check the VSDB bits to know whether or not
specific displays should have the feature enable.

[how]
Add a debugfs entry that controls a new DM debug option,
"force_timing_sync". This debug option will set on any newly created
stream following the change to the debug option.
Expose a new interface from DC that performs the timing sync and a helper
to the "force_timing_sync" debugfs that iterates over the current streams
and modifies the current synchornization state and grouping.

Example usage to force a resync (from an X based desktop):

echo 1 > /sys/kernel/debug/dri/0/amdgpu_dm_force_timing_sync
xset dpms force off && xset dpms force on
Signed-off-by: NVictor Lu <victorchengchi.lu@amd.com>
Reviewed-by: NAurabindo Jayamohanan Pillai <Aurabindo.Pillai@amd.com>
Acked-by: NAurabindo Pillai <aurabindo.pillai@amd.com>
Acked-by: NNicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[why]
Some of the DSC debugfs read enteries are missing comments
explaining how to use and how to comprehend the results.
Signed-off-by: NEryk Brol <eryk.brol@amd.com>
Signed-off-by: NMikita Lipski <mikita.lipski@amd.com>
Reviewed-by: NMikita Lipski <Mikita.Lipski@amd.com>
Acked-by: NAurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why]
We need to be able to specify bits per pixel for DSC on any
connector.

[How]
Overwrite computed DSC target rate in dsc_cfg, with requested value.
Overwrites for both SST and MST connectors, but in different places, but the process is identical. Overwrites only if DSC is decided to be enabled on that connector.
Signed-off-by: NEryk Brol <eryk.brol@amd.com>
Signed-off-by: NMikita Lipski <mikita.lipski@amd.com>
Reviewed-by: NMikita Lipski <Mikita.Lipski@amd.com>
Acked-by: NAurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>