The calls to pm_runtime_force_suspend/resume() functions are only
relevant if the device is not configured to act as a WoL wakeup source.
Add the device_may_wakeup() test before calling them.

Fixes: 3e2a5e15 ("net: macb: add wake-on-lan support via magic packet")
Cc: Claudiu Beznea <claudiu.beznea@microchip.com>
Cc: Harini Katakam <harini.katakam@xilinx.com>
Cc: Sergio Prado <sergio.prado@e-labworks.com>
Reviewed-by: NFlorian Fainelli <f.fainelli@gmail.com>
Signed-off-by: NNicolas Ferre <nicolas.ferre@microchip.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

As we now use the phylink call to phylink_stop() in the non-WoL path,
there is no need for this call to netif_carrier_off() anymore. It can
disturb the underlying phylink FSM.

Fixes: 7897b071 ("net: macb: convert to phylink")
Cc: Claudiu Beznea <claudiu.beznea@microchip.com>
Cc: Harini Katakam <harini.katakam@xilinx.com>
Cc: Antoine Tenart <antoine.tenart@bootlin.com>
Reviewed-by: NFlorian Fainelli <f.fainelli@gmail.com>
Signed-off-by: NNicolas Ferre <nicolas.ferre@microchip.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Keep previous function goals and integrate phylink actions to them.

phylink_ethtool_get_wol() is not enough to figure out if Ethernet driver
supports Wake-on-Lan.
Initialization of "supported" and "wolopts" members is done in phylink
function, no need to keep them in calling function.

phylink_ethtool_set_wol() return value is considered and determines
if the MAC has to handle WoL or not. The case where the PHY doesn't
implement WoL leads to the MAC configuring it to provide this feature.

Fixes: 7897b071 ("net: macb: convert to phylink")
Cc: Claudiu Beznea <claudiu.beznea@microchip.com>
Cc: Harini Katakam <harini.katakam@xilinx.com>
Cc: Antoine Tenart <antoine.tenart@bootlin.com>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: NNicolas Ferre <nicolas.ferre@microchip.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Change the way the "magic-packet" DT property is handled in the
macb_probe() function, matching DT binding documentation.
Now we mark the device as "wakeup capable" instead of calling the
device_init_wakeup() function that would enable the wakeup source.

For Ethernet WoL, enabling the wakeup_source is done by
using ethtool and associated macb_set_wol() function that
already calls device_set_wakeup_enable() for this purpose.

That would reduce power consumption by cutting more clocks if
"magic-packet" property is set but WoL is not configured by ethtool.

Fixes: 3e2a5e15 ("net: macb: add wake-on-lan support via magic packet")
Cc: Claudiu Beznea <claudiu.beznea@microchip.com>
Cc: Harini Katakam <harini.katakam@xilinx.com>
Cc: Sergio Prado <sergio.prado@e-labworks.com>
Reviewed-by: NFlorian Fainelli <f.fainelli@gmail.com>
Signed-off-by: NNicolas Ferre <nicolas.ferre@microchip.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Use the proper struct device pointer to check if the wakeup flag
and wakeup source are positioned.
Use the one passed by function call which is equivalent to
&bp->dev->dev.parent.

It's preventing the trigger of a spurious interrupt in case the
Wake-on-Lan feature is used.

Fixes: d54f89af ("net: macb: Add pm runtime support")
Cc: Claudiu Beznea <claudiu.beznea@microchip.com>
Cc: Harini Katakam <harini.katakam@xilinx.com>
Reviewed-by: NFlorian Fainelli <f.fainelli@gmail.com>
Signed-off-by: NNicolas Ferre <nicolas.ferre@microchip.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

we need to set 'active_vfs' back to 0, if something goes wrong during the
allocation of SR-IOV resources: otherwise, further VF configurations will
wrongly assume that bp->pf.vf[x] are valid memory locations, and commands
like the ones in the following sequence:

 # echo 2 >/sys/bus/pci/devices/${ADDR}/sriov_numvfs
 # ip link set dev ens1f0np0 up
 # ip link set dev ens1f0np0 vf 0 trust on

will cause a kernel crash similar to this:

 bnxt_en 0000:3b:00.0: not enough MMIO resources for SR-IOV
 BUG: kernel NULL pointer dereference, address: 0000000000000014
 #PF: supervisor read access in kernel mode
 #PF: error_code(0x0000) - not-present page
 PGD 0 P4D 0
 Oops: 0000 [#1] SMP PTI
 CPU: 43 PID: 2059 Comm: ip Tainted: G          I       5.8.0-rc2.upstream+ #871
 Hardware name: Dell Inc. PowerEdge R740/08D89F, BIOS 2.2.11 06/13/2019
 RIP: 0010:bnxt_set_vf_trust+0x5b/0x110 [bnxt_en]
 Code: 44 24 58 31 c0 e8 f5 fb ff ff 85 c0 0f 85 b6 00 00 00 48 8d 1c 5b 41 89 c6 b9 0b 00 00 00 48 c1 e3 04 49 03 9c 24 f0 0e 00 00 <8b> 43 14 89 c2 83 c8 10 83 e2 ef 45 84 ed 49 89 e5 0f 44 c2 4c 89
 RSP: 0018:ffffac6246a1f570 EFLAGS: 00010246
 RAX: 0000000000000000 RBX: 0000000000000000 RCX: 000000000000000b
 RDX: 0000000000000001 RSI: 0000000000000000 RDI: ffff98b28f538900
 RBP: ffff98b28f538900 R08: 0000000000000000 R09: 0000000000000008
 R10: ffffffffb9515be0 R11: ffffac6246a1f678 R12: ffff98b28f538000
 R13: 0000000000000001 R14: 0000000000000000 R15: ffffffffc05451e0
 FS:  00007fde0f688800(0000) GS:ffff98baffd40000(0000) knlGS:0000000000000000
 CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
 CR2: 0000000000000014 CR3: 000000104bb0a003 CR4: 00000000007606e0
 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
 PKRU: 55555554
 Call Trace:
  do_setlink+0x994/0xfe0
  __rtnl_newlink+0x544/0x8d0
  rtnl_newlink+0x47/0x70
  rtnetlink_rcv_msg+0x29f/0x350
  netlink_rcv_skb+0x4a/0x110
  netlink_unicast+0x21d/0x300
  netlink_sendmsg+0x329/0x450
  sock_sendmsg+0x5b/0x60
  ____sys_sendmsg+0x204/0x280
  ___sys_sendmsg+0x88/0xd0
  __sys_sendmsg+0x5e/0xa0
  do_syscall_64+0x47/0x80
  entry_SYSCALL_64_after_hwframe+0x44/0xa9

Fixes: c0c050c5 ("bnxt_en: New Broadcom ethernet driver.")
Reported-by: NFei Liu <feliu@redhat.com>
CC: Jonathan Toppins <jtoppins@redhat.com>
CC: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: NDavide Caratti <dcaratti@redhat.com>
Reviewed-by: NMichael Chan <michael.chan@broadcom.com>
Acked-by: NJonathan Toppins <jtoppins@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

CT entries are deleted via a workqueue from netfilter. If removing the
module before that, the rules are cleaned by the driver itself, but the
memory entries for them are not freed. Fix that.

Fixes: ac991b48 ("net/mlx5e: CT: Offload established flows")
Signed-off-by: NEli Britstein <elibr@mellanox.com>
Reviewed-by: NRoi Dayan <roid@mellanox.com>
Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>

Device unit for port buffers size, xoff_threshold and xon_threshold is
cells. Fix a bug in driver where cell unit size was hard-coded to
128 bytes. This hard-coded value is buggy, as it is wrong for some hardware
versions.

Driver to read cell size from SBCAM register and translate bytes to cell
units accordingly.

In order to fix the bug, this patch exposes SBCAM (Shared buffer
capabilities mask) layout and defines.

If SBCAM.cap_cell_size is valid, use it for all bytes to cells
calculations. If not valid, fallback to 128.

Cell size do not change on the fly per device. Instead of issuing SBCAM
access reg command every time such translation is needed, cache it in
mlx5e_dcbx as part of mlx5e_dcbnl_initialize(). Pass dcbx.port_buff_cell_sz
as a param to every function that needs bytes to cells translation.

While fixing the bug, move MLX5E_BUFFER_CELL_SHIFT macro to
en_dcbnl.c, as it is only used by that file.

Fixes: 0696d608 ("net/mlx5e: Receive buffer configuration")
Signed-off-by: NEran Ben Elisha <eranbe@mellanox.com>
Reviewed-by: NHuy Nguyen <huyn@mellanox.com>
Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>

Some released FW versions mistakenly don't set the capability that 50G
per lane link-modes are supported for VFs (ptys_extended_ethernet
capability bit). When the capability is unset, read
PTYS.ext_eth_proto_capability (always reliable).
If PTYS.ext_eth_proto_capability is valid (has a non-zero value)
conclude that the HCA supports 50G per lane. Otherwise, conclude that
the HCA doesn't support 50G per lane.

Fixes: a08b4ed1 ("net/mlx5: Add support to ext_* fields introduced in Port Type and Speed register")
Signed-off-by: NAya Levin <ayal@mellanox.com>
Reviewed-by: NEran Ben Elisha <eranbe@mellanox.com>
Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>

After function reload, CPU mapping used by aRFS RX is broken, leading to
a kernel panic. Fix by moving initialization of rx_cpu_rmap from
netdev_init to netdev_attach. IRQ table is re-allocated on mlx5_load,
but netdev is not re-initialize.

Trace of the panic:
[ 22.055672] general protection fault, probably for non-canonical address 0x785634120000ff1c: 0000 [#1] SMP PTI
[ 22.065010] CPU: 4 PID: 0 Comm: swapper/4 Not tainted 5.7.0-rc2-for-upstream-perf-2020-04-21_16-34-03-31 #1
[ 22.067967] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.12.1-0-ga5cab58e9a3f-prebuilt.qemu.org 04/01/2014
[ 22.071174] RIP: 0010:get_rps_cpu+0x267/0x300
[ 22.075692] RSP: 0018:ffffc90000244d60 EFLAGS: 00010202
[ 22.076888] RAX: ffff888459b0e400 RBX: 0000000000000000 RCX:0000000000000007
[ 22.078364] RDX: 0000000000008884 RSI: ffff888467cb5b00 RDI:0000000000000000
[ 22.079815] RBP: 00000000ff342b27 R08: 0000000000000007 R09:0000000000000003
[ 22.081289] R10: ffffffffffffffff R11: 00000000000070cc R12:ffff888454900000
[ 22.082767] R13: ffffc90000e5a950 R14: ffffc90000244dc0 R15:0000000000000007
[ 22.084190] FS: 0000000000000000(0000) GS:ffff88846fc80000(0000)knlGS:0000000000000000
[ 22.086161] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 22.087427] CR2: ffffffffffffffff CR3: 0000000464426003 CR4:0000000000760ee0
[ 22.088888] DR0: 0000000000000000 DR1: 0000000000000000 DR2:0000000000000000
[ 22.090336] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7:0000000000000400
[ 22.091764] PKRU: 55555554
[ 22.092618] Call Trace:
[ 22.093442] <IRQ>
[ 22.094211] ? kvm_clock_get_cycles+0xd/0x10
[ 22.095272] netif_receive_skb_list_internal+0x258/0x2a0
[ 22.096460] gro_normal_list.part.137+0x19/0x40
[ 22.097547] napi_complete_done+0xc6/0x110
[ 22.098685] mlx5e_napi_poll+0x190/0x670 [mlx5_core]
[ 22.099859] net_rx_action+0x2a0/0x400
[ 22.100848] __do_softirq+0xd8/0x2a8
[ 22.101829] irq_exit+0xa5/0xb0
[ 22.102750] do_IRQ+0x52/0xd0
[ 22.103654] common_interrupt+0xf/0xf
[ 22.104641] </IRQ>

Fixes: 4383cfcc ("net/mlx5: Add devlink reload")
Signed-off-by: NAya Levin <ayal@mellanox.com>
Reviewed-by: NEran Ben Elisha <eranbe@mellanox.com>
Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>

When detaching netdev, remove vxlan port configuration using
udp_tunnel_drop_rx_info. During function reload, configuration will be
restored using udp_tunnel_get_rx_info. This ensures sync between
firmware and driver. Use udp_tunnel_get_rx_info even if its physical
interface is down.

Fixes: 4383cfcc ("net/mlx5: Add devlink reload")
Signed-off-by: NAya Levin <ayal@mellanox.com>
Reviewed-by: NEran Ben Elisha <eranbe@mellanox.com>
Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>

In mlx5e_configure_flower() flow pointer is protected by rcu read lock.
However, after cited commit the pointer is being used outside of rcu read
block. Extend the block to protect all pointer accesses.

Fixes: 553f9328 ("net/mlx5e: Support tc block sharing for representors")
Signed-off-by: NVlad Buslov <vladbu@mellanox.com>
Reviewed-by: NRoi Dayan <roid@mellanox.com>
Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>

In helper function is_flow_rule_duplicate_allowed() verify that rpviv
pointer is not NULL before dereferencing it. This can happen when device is
in NIC mode and leads to following crash:

[90444.046419] BUG: kernel NULL pointer dereference, address: 0000000000000000
[90444.048149] #PF: supervisor read access in kernel mode
[90444.049781] #PF: error_code(0x0000) - not-present page
[90444.051386] PGD 80000003d35a4067 P4D 80000003d35a4067 PUD 3d35a3067 PMD 0
[90444.053051] Oops: 0000 [#1] SMP PTI
[90444.054683] CPU: 16 PID: 31736 Comm: tc Not tainted 5.8.0-rc1+ #1157
[90444.056340] Hardware name: Supermicro SYS-2028TP-DECR/X10DRT-P, BIOS 2.0b 03/30/2017
[90444.058079] RIP: 0010:mlx5e_configure_flower+0x3aa/0x9b0 [mlx5_core]
[90444.059753] Code: 24 50 49 8b 95 08 02 00 00 48 b8 00 08 00 00 04 00 00 00 48 21 c2 48 39 c2 74 0a 41 f6 85 0d 02 00 00 20 74 16 48 8b 44 24 20 <48> 8b 00 66 83 78 20 ff 74 07 4d 89 aa e0 00 00 00 48 83 7d 28 00
[90444.063232] RSP: 0018:ffffabe9c61ff768 EFLAGS: 00010246
[90444.065014] RAX: 0000000000000000 RBX: ffff9b13c4c91e80 RCX: 00000000000093fa
[90444.066784] RDX: 0000000400000800 RSI: 0000000000000000 RDI: 000000000002d5e0
[90444.068533] RBP: ffff9b174d308468 R08: 0000000000000000 R09: ffff9b17d63003f0
[90444.070285] R10: ffff9b17ea288600 R11: 0000000000000000 R12: ffffabe9c61ff878
[90444.072032] R13: ffff9b174d300000 R14: ffffabe9c61ffbb8 R15: ffff9b174d300880
[90444.073760] FS:  00007f3c23775480(0000) GS:ffff9b13efc80000(0000) knlGS:0000000000000000
[90444.075492] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[90444.077266] CR2: 0000000000000000 CR3: 00000003e2a60002 CR4: 00000000001606e0
[90444.079024] Call Trace:
[90444.080753]  tc_setup_cb_add+0xca/0x1e0
[90444.082415]  fl_hw_replace_filter+0x15f/0x1f0 [cls_flower]
[90444.084119]  fl_change+0xa59/0x13dc [cls_flower]
[90444.085772]  ? wait_for_completion+0xa8/0xf0
[90444.087364]  tc_new_tfilter+0x3f5/0xa60
[90444.088960]  rtnetlink_rcv_msg+0xeb/0x360
[90444.090514]  ? __d_lookup_done+0x76/0xe0
[90444.092034]  ? proc_alloc_inode+0x16/0x70
[90444.093560]  ? prep_new_page+0x8c/0xf0
[90444.095048]  ? _cond_resched+0x15/0x30
[90444.096483]  ? rtnl_calcit.isra.0+0x110/0x110
[90444.097907]  netlink_rcv_skb+0x49/0x110
[90444.099289]  netlink_unicast+0x191/0x230
[90444.100629]  netlink_sendmsg+0x243/0x480
[90444.101984]  sock_sendmsg+0x5e/0x60
[90444.103305]  ____sys_sendmsg+0x1f3/0x260
[90444.104597]  ? copy_msghdr_from_user+0x5c/0x90
[90444.105916]  ? __mod_lruvec_state+0x3c/0xe0
[90444.107210]  ___sys_sendmsg+0x81/0xc0
[90444.108484]  ? do_filp_open+0xa5/0x100
[90444.109732]  ? handle_mm_fault+0x117b/0x1e00
[90444.110970]  ? __check_object_size+0x46/0x147
[90444.112205]  ? __check_object_size+0x136/0x147
[90444.113402]  __sys_sendmsg+0x59/0xa0
[90444.114587]  do_syscall_64+0x4d/0x90
[90444.115782]  entry_SYSCALL_64_after_hwframe+0x44/0xa9
[90444.116953] RIP: 0033:0x7f3c2393b7b8
[90444.118101] Code: Bad RIP value.
[90444.119240] RSP: 002b:00007ffc6ad8e6c8 EFLAGS: 00000246 ORIG_RAX: 000000000000002e
[90444.120408] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f3c2393b7b8
[90444.121583] RDX: 0000000000000000 RSI: 00007ffc6ad8e740 RDI: 0000000000000003
[90444.122750] RBP: 000000005eea0c3a R08: 0000000000000001 R09: 00007ffc6ad8e68c
[90444.123928] R10: 0000000000404fa8 R11: 0000000000000246 R12: 0000000000000001
[90444.125073] R13: 0000000000000000 R14: 00007ffc6ad92a00 R15: 00000000004866a0
[90444.126221] Modules linked in: act_skbedit act_tunnel_key act_mirred bonding vxlan ip6_udp_tunnel udp_tunnel nfnetlink act_gact cls_flower sch_ingress openvswitch nsh nf_conncount nfsv3 nfs_acl nfs lockd grace fscache tun bridge stp llc sunrpc rdma_ucm rdma_cm iw_cm ib_cm mlx5_ib ib_uverbs ib_core mlx5_core intel_r
apl_msr intel_rapl_common sb_edac x86_pkg_temp_thermal intel_powerclamp coretemp kvm_intel mlxfw kvm act_ct nf_flow_table nf_nat nf_conntrack irqbypass crct10dif_pclmul nf_defrag_ipv6 igb ipmi_ssif libcrc32c crc32_pclmul crc32c_intel ipmi_si nf_defrag_ipv4 ptp ghash_clmulni_intel mei_me ses iTCO_wdt i2c_i801 pps_core
ioatdma iTCO_vendor_support joydev mei enclosure intel_cstate i2c_smbus wmi dca ipmi_devintf intel_uncore lpc_ich ipmi_msghandler pcspkr acpi_pad acpi_power_meter ast i2c_algo_bit drm_vram_helper drm_kms_helper drm_ttm_helper ttm drm mpt3sas raid_class scsi_transport_sas
[90444.136253] CR2: 0000000000000000
[90444.137621] ---[ end trace 924af62aa2b151bd ]---

Fixes: 553f9328 ("net/mlx5e: Support tc block sharing for representors")
Reported-by: NDavid Ahern <dsahern@gmail.com>
Signed-off-by: NVlad Buslov <vladbu@mellanox.com>
Reviewed-by: NRoi Dayan <roid@mellanox.com>
Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>

Refactoring eswitch ingress acl codes accidentally inserts extra
memset zero that removes vlan and/or qos setting in legacy mode.

Fixes: 07bab950 ("net/mlx5: E-Switch, Refactor eswitch ingress acl codes")
Signed-off-by: NVu Pham <vuhuong@mellanox.com>
Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>

Fix eeprom SFP query support by setting i2c_addr, offset and page number
correctly. Unlike QSFP modules, SFP eeprom params are as follow:
- i2c_addr is 0x50 for offset 0 - 255 and 0x51 for offset 256 - 511.
- Page number is always zero.
- Page offset is always relative to zero.

As part of eeprom query, query the module ID (SFP / QSFP*) via helper
function to set the params accordingly.

In addition, change mlx5_qsfp_eeprom_page() input type to be u16 to avoid
unnecessary casting.

Fixes: a708fb7b ("net/mlx5e: ethtool, Add support for EEPROM high pages query")
Signed-off-by: NEran Ben Elisha <eranbe@mellanox.com>
Signed-off-by: NHuy Nguyen <huyn@mellanox.com>
Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>

NVM config file address will be modified when the MBI image is upgraded.
Driver would return stale config values if user reads the nvm-config
(via ethtool -d) in this state. The fix is to re-populate nvm attribute
info while reading the nvm config values/partition.

Changes from previous version:
-------------------------------
v3: Corrected the formatting in 'Fixes' tag.
v2: Added 'Fixes' tag.

Fixes: 1ac4329a ("qed: Add configuration information to register dump and debug data")
Signed-off-by: NSudarsana Reddy Kalluru <skalluru@marvell.com>
Signed-off-by: NIgor Russkikh <irusskikh@marvell.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Convert all-mask IP address to Big Endian, instead, for comparison.

Fixes: f286dd8e ("cxgb4: use correct type for all-mask IP address comparison")
Signed-off-by: NRahul Lakkireddy <rahul.lakkireddy@chelsio.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch fixes ip dst and ipv6 address filters.
There were 2 mistakes in the code, which led to the issue:
* invalid register was used for ipv4 dst address;
* incorrect write order of dwords for ipv6 addresses.

Fixes: 23e7a718 ("net: aquantia: add rx-flow filter definitions")
Signed-off-by: NDmitry Bogdanov <dbogdanov@marvell.com>
Signed-off-by: NMark Starovoytov <mstarovoitov@marvell.com>
Signed-off-by: NAlexander Lobakin <alobakin@marvell.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The queue reset pattern is used in a couple different places,
only slightly different from each other, and could cause
issues if one gets changed and the other didn't.  This puts
them together so that only one version is needed, yet each
can have slighty different effects by passing in a pointer
to a work function to do whatever configuration twiddling is
needed in the middle of the reset.

This specifically addresses issues seen where under loops
of changing ring size or queue count parameters we could
occasionally bump into the netdev watchdog.

v2: added more commit message commentary

Fixes: 4d03e00a ("ionic: Add initial ethtool support")
Signed-off-by: NShannon Nelson <snelson@pensando.io>
Acked-by: NJakub Kicinski <kuba@kernel.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When generating debug dump, driver firstly collects all data in binary
form, and then performs per-feature formatting to human-readable if it
is supported.

For ethtool -d, this is roughly incorrect for two reasons. First of all,
drivers should always provide only original raw dumps to Ethtool without
any changes.
The second, and more critical, is that Ethtool's output buffer size is
strictly determined by ethtool_ops::get_regs_len(), and all data *must*
fit in it. The current version of driver always returns the size of raw
data, but the size of the formatted buffer exceeds it in most cases.
This leads to out-of-bound writes and memory corruption.

Address both issues by adding an option to return original, non-formatted
debug data, and using it for Ethtool case.

v2:
 - Expand commit message to make it more clear;
 - No functional changes.

Fixes: c965db44 ("qed: Add support for debug data collection")
Signed-off-by: NAlexander Lobakin <alobakin@marvell.com>
Signed-off-by: NIgor Russkikh <irusskikh@marvell.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

rwlock.h should not be included directly. Instead linux/splinlock.h
should be included. Including it directly will break the RT build.

Fixes: 549c243e ("net/mlx5e: Extract neigh-specific code from en_rep.c to rep/neigh.c")
Signed-off-by: NSebastian Andrzej Siewior <bigeasy@linutronix.de>
Reviewed-by: NLeon Romanovsky <leonro@mellanox.com>
Acked-by: NSaeed Mahameed <saeedm@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

In the ISR, we poll the event register for the queues in need of
service and then enter polled mode. After this point, the event
register will never be read again until we exit polled mode.

In a scenario where a UDP flow is routed back out through the same
interface, i.e. "router-on-a-stick" we'll typically only see an rx
queue event initially. Once we start to process the incoming flow
we'll be locked polled mode, but we'll never clean the tx rings since
that event is never caught.

Eventually the netdev watchdog will trip, causing all buffers to be
dropped and then the process starts over again.

Rework the NAPI poll to keep trying to consome the entire budget as
long as new events are coming in, making sure to service all rx/tx
queues, in priority order, on each pass.

Fixes: 4d494cdc ("net: fec: change data structure to support multiqueue")
Signed-off-by: NTobias Waldekranz <tobias@waldekranz.com>
Tested-by: NFugang Duan <fugang.duan@nxp.com>
Reviewed-by: NFugang Duan <fugang.duan@nxp.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

clang static analysis flags this garbage return

drivers/net/ethernet/marvell/sky2.c:208:2: warning: Undefined or garbage value returned to caller [core.uninitialized.UndefReturn]
        return v;
        ^~~~~~~~

static inline u16 gm_phy_read( ...
{
	u16 v;
	__gm_phy_read(hw, port, reg, &v);
	return v;
}

__gm_phy_read can return without setting v.

So handle similar to skge.c's gm_phy_read, initialize v.
Signed-off-by: NTom Rix <trix@redhat.com>
Reviewed-by: NAndrew Lunn <andrew@lunn.ch>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Enable promisc mode of PF, set VF link state to enable, and
run iperf of the VF, then do self test of the PF. The self test
will fail with a low frequency, and may cause a use-after-free
problem.

[   87.142126] selftest:000004a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
[   87.159722] ==================================================================
[   87.174187] BUG: KASAN: use-after-free in hex_dump_to_buffer+0x140/0x608
[   87.187600] Read of size 1 at addr ffff003b22828000 by task ethtool/1186
[   87.201012]
[   87.203978] CPU: 7 PID: 1186 Comm: ethtool Not tainted 5.5.0-rc4-gfd51c473-dirty #4
[   87.219306] Hardware name: Huawei TaiShan 2280 V2/BC82AMDA, BIOS TA BIOS 2280-A CS V2.B160.01 01/15/2020
[   87.238292] Call trace:
[   87.243173]  dump_backtrace+0x0/0x280
[   87.250491]  show_stack+0x24/0x30
[   87.257114]  dump_stack+0xe8/0x140
[   87.263911]  print_address_description.isra.8+0x70/0x380
[   87.274538]  __kasan_report+0x12c/0x230
[   87.282203]  kasan_report+0xc/0x18
[   87.288999]  __asan_load1+0x60/0x68
[   87.295969]  hex_dump_to_buffer+0x140/0x608
[   87.304332]  print_hex_dump+0x140/0x1e0
[   87.312000]  hns3_lb_check_skb_data+0x168/0x170
[   87.321060]  hns3_clean_rx_ring+0xa94/0xfe0
[   87.329422]  hns3_self_test+0x708/0x8c0

The length of packet sent by the selftest process is only
128 + 14 bytes, and the min buffer size of a BD is 256 bytes,
and the receive process will make sure the packet sent by
the selftest process is in the linear part, so only check
the linear part in hns3_lb_check_skb_data().

So fix this use-after-free by using skb_headlen() to dump
skb->data instead of skb->len.

Fixes: c39c4d98 ("net: hns3: Add mac loopback selftest support in hns3 driver")
Signed-off-by: NYonglong Liu <liuyonglong@huawei.com>
Signed-off-by: NHuazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When unloading driver, if flag HNS3_NIC_STATE_INITED has been
already cleared, the debugfs will not be uninitialized, so fix it.

Fixes: b2292360 ("net: hns3: Add debugfs framework registration")
Signed-off-by: NHuazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When asserts VF reset fail, flag HCLGEVF_STATE_CMD_DISABLE
and handshake status should not set, otherwise the retry will
fail. So adds a check for asserting VF reset and returns
directly when fails.

Fixes: ef5f8e50 ("net: hns3: stop handling command queue while resetting VF")
Signed-off-by: NHuazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

If there is a PF reset pending before FLR prepare, FLR's
preparatory work will not fail, but the FLR rebuild procedure
will fail for this pending. So this PF reset pending should
be handled in the FLR preparatory.

Fixes: 8627bded ("net: hns3: refactor the precedure of PF FLR")
Signed-off-by: NHuazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

rmnet can have only two bridge interface.
One of them is a link interface and another one is added by
the master operation.
rmnet interface shouldn't allow adding additional
bridge interfaces by mater operation.
But, there is no code to deny additional interfaces.
So, interface leak occurs.

Test commands:
    ip link add dummy0 type dummy
    ip link add dummy1 type dummy
    ip link add dummy2 type dummy
    ip link add rmnet0 link dummy0 type rmnet mux_id 1
    ip link set dummy1 master rmnet0
    ip link set dummy2 master rmnet0
    ip link del rmnet0

In the above test command, the dummy0 was attached to rmnet as VND mode.
Then, dummy1 was attached to rmnet0 as BRIDGE mode.
At this point, dummy0 mode is switched from VND to BRIDGE automatically.
Then, dummy2 is attached to rmnet as BRIDGE mode.
At this point, rmnet0 should deny this operation.
But, rmnet0 doesn't deny this.
So that below splat occurs when the rmnet0 interface is deleted.

Splat looks like:
[  186.684787][    C2] WARNING: CPU: 2 PID: 1009 at net/core/dev.c:8992 rollback_registered_many+0x986/0xcf0
[  186.684788][    C2] Modules linked in: rmnet dummy openvswitch nsh nf_conncount nf_nat nf_conntrack nf_defrag_x
[  186.684805][    C2] CPU: 2 PID: 1009 Comm: ip Not tainted 5.8.0-rc1+ #621
[  186.684807][    C2] Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006
[  186.684808][    C2] RIP: 0010:rollback_registered_many+0x986/0xcf0
[  186.684811][    C2] Code: 41 8b 4e cc 45 31 c0 31 d2 4c 89 ee 48 89 df e8 e0 47 ff ff 85 c0 0f 84 cd fc ff ff 5
[  186.684812][    C2] RSP: 0018:ffff8880cd9472e0 EFLAGS: 00010287
[  186.684815][    C2] RAX: ffff8880cc56da58 RBX: ffff8880ab21c000 RCX: ffffffff9329d323
[  186.684816][    C2] RDX: 1ffffffff2be6410 RSI: 0000000000000008 RDI: ffffffff95f32080
[  186.684818][    C2] RBP: dffffc0000000000 R08: fffffbfff2be6411 R09: fffffbfff2be6411
[  186.684819][    C2] R10: ffffffff95f32087 R11: 0000000000000001 R12: ffff8880cd947480
[  186.684820][    C2] R13: ffff8880ab21c0b8 R14: ffff8880cd947400 R15: ffff8880cdf10640
[  186.684822][    C2] FS:  00007f00843890c0(0000) GS:ffff8880d4e00000(0000) knlGS:0000000000000000
[  186.684823][    C2] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  186.684825][    C2] CR2: 000055b8ab1077b8 CR3: 00000000ab612006 CR4: 00000000000606e0
[  186.684826][    C2] Call Trace:
[  186.684827][    C2]  ? lockdep_hardirqs_on_prepare+0x379/0x540
[  186.684829][    C2]  ? netif_set_real_num_tx_queues+0x780/0x780
[  186.684830][    C2]  ? rmnet_unregister_real_device+0x56/0x90 [rmnet]
[  186.684831][    C2]  ? __kasan_slab_free+0x126/0x150
[  186.684832][    C2]  ? kfree+0xdc/0x320
[  186.684834][    C2]  ? rmnet_unregister_real_device+0x56/0x90 [rmnet]
[  186.684835][    C2]  unregister_netdevice_many.part.135+0x13/0x1b0
[  186.684836][    C2]  rtnl_delete_link+0xbc/0x100
[ ... ]
[  238.440071][ T1009] unregister_netdevice: waiting for rmnet0 to become free. Usage count = 1

Fixes: 037f9cdf ("net: rmnet: use upper/lower device infrastructure")
Signed-off-by: NTaehee Yoo <ap420073@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

There are two types of the lower interface of rmnet that are VND
and BRIDGE.
Each lower interface can have only one type either VND or BRIDGE.
But, there is a case, which uses both lower interface types.
Due to this unexpected behavior, lower interface leak occurs.

Test commands:
    ip link add dummy0 type dummy
    ip link add dummy1 type dummy
    ip link add rmnet0 link dummy0 type rmnet mux_id 1
    ip link set dummy1 master rmnet0
    ip link add rmnet1 link dummy1 type rmnet mux_id 2
    ip link del rmnet0

The dummy1 was attached as BRIDGE interface of rmnet0.
Then, it also was attached as VND interface of rmnet1.
This is unexpected behavior and there is no code for handling this case.
So that below splat occurs when the rmnet0 interface is deleted.

Splat looks like:
[   53.254112][    C1] WARNING: CPU: 1 PID: 1192 at net/core/dev.c:8992 rollback_registered_many+0x986/0xcf0
[   53.254117][    C1] Modules linked in: rmnet dummy openvswitch nsh nf_conncount nf_nat nf_conntrack nf_defrag_ipv6 nfx
[   53.254182][    C1] CPU: 1 PID: 1192 Comm: ip Not tainted 5.8.0-rc1+ #620
[   53.254188][    C1] Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006
[   53.254192][    C1] RIP: 0010:rollback_registered_many+0x986/0xcf0
[   53.254200][    C1] Code: 41 8b 4e cc 45 31 c0 31 d2 4c 89 ee 48 89 df e8 e0 47 ff ff 85 c0 0f 84 cd fc ff ff 0f 0b e5
[   53.254205][    C1] RSP: 0018:ffff888050a5f2e0 EFLAGS: 00010287
[   53.254214][    C1] RAX: ffff88805756d658 RBX: ffff88804d99c000 RCX: ffffffff8329d323
[   53.254219][    C1] RDX: 1ffffffff0be6410 RSI: 0000000000000008 RDI: ffffffff85f32080
[   53.254223][    C1] RBP: dffffc0000000000 R08: fffffbfff0be6411 R09: fffffbfff0be6411
[   53.254228][    C1] R10: ffffffff85f32087 R11: 0000000000000001 R12: ffff888050a5f480
[   53.254233][    C1] R13: ffff88804d99c0b8 R14: ffff888050a5f400 R15: ffff8880548ebe40
[   53.254238][    C1] FS:  00007f6b86b370c0(0000) GS:ffff88806c200000(0000) knlGS:0000000000000000
[   53.254243][    C1] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[   53.254248][    C1] CR2: 0000562c62438758 CR3: 000000003f600005 CR4: 00000000000606e0
[   53.254253][    C1] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[   53.254257][    C1] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[   53.254261][    C1] Call Trace:
[   53.254266][    C1]  ? lockdep_hardirqs_on_prepare+0x379/0x540
[   53.254270][    C1]  ? netif_set_real_num_tx_queues+0x780/0x780
[   53.254275][    C1]  ? rmnet_unregister_real_device+0x56/0x90 [rmnet]
[   53.254279][    C1]  ? __kasan_slab_free+0x126/0x150
[   53.254283][    C1]  ? kfree+0xdc/0x320
[   53.254288][    C1]  ? rmnet_unregister_real_device+0x56/0x90 [rmnet]
[   53.254293][    C1]  unregister_netdevice_many.part.135+0x13/0x1b0
[   53.254297][    C1]  rtnl_delete_link+0xbc/0x100
[   53.254301][    C1]  ? rtnl_af_register+0xc0/0xc0
[   53.254305][    C1]  rtnl_dellink+0x2dc/0x840
[   53.254309][    C1]  ? find_held_lock+0x39/0x1d0
[   53.254314][    C1]  ? valid_fdb_dump_strict+0x620/0x620
[   53.254318][    C1]  ? rtnetlink_rcv_msg+0x457/0x890
[   53.254322][    C1]  ? lock_contended+0xd20/0xd20
[   53.254326][    C1]  rtnetlink_rcv_msg+0x4a8/0x890
[ ... ]
[   73.813696][ T1192] unregister_netdevice: waiting for rmnet0 to become free. Usage count = 1

Fixes: 037f9cdf ("net: rmnet: use upper/lower device infrastructure")
Signed-off-by: NTaehee Yoo <ap420073@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When sending mailbox in the work of aeq event, another aeq event
will be triggered. because the last aeq work is not exited and only
one work can be excuted simultaneously in the same workqueue, mailbox
sending function will return failure of timeout. We create and use
another workqueue to fix this.
Signed-off-by: NLuo bin <luobin9@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

get_dev_cap and set_resources_state functions may return a positive
value because of hardware failure, and the positive return value
can not be passed to ERR_PTR directly.

Fixes: 7dd29ee1 ("hinic: add sriov feature support")
Signed-off-by: NLuo bin <luobin9@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

t4_prep_fw goto bye tag with positive return value when something
bad happened and which can not free resource in adap_init0.
so fix it to return negative value.

Fixes: 16e47624 ("cxgb4: Add new scheme to update T4/T5 firmware")
Reported-by: NHulk Robot <hulkci@huawei.com>
Signed-off-by: NLi Heng <liheng40@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When support for short preambles was added, it incorrectly keyed its
decision off state->speed instead of state->interface.  state->speed
is not guaranteed to be correct for in-band modes, which can lead to
short preambles being unexpectedly disabled.

Fix this by keying off the interface mode, which is the only way that
mvneta can operate at 2.5Gbps.

Fixes: da58a931 ("net: mvneta: Add support for 2500Mbps SGMII")
Signed-off-by: NRussell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The rings bitmap of an interrupt vector encodes
which of the device's rings were assigned to that
interrupt vector.
Hence the iteration range of the tx rings bitmap
(for_each_set_bit()) should be the total number of
Tx rings of that netdevice instead of the number of
rings assigned to the interrupt vector.
Since there are 2 cores, and one interrupt vector for
each core, the number of rings asigned to an interrupt
vector is half the number of available rings.
The impact of this error is that the upper half of the
tx rings could still generate interrupts during napi
polling.

Fixes: d4fd0404 ("enetc: Introduce basic PF and VF ENETC ethernet drivers")
Signed-off-by: NClaudiu Manoil <claudiu.manoil@nxp.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Let the network stack know the real number of queues that
we are using.

v2: added error checking

Fixes: 49d3b493 ("ionic: disable the queues on link down")
Signed-off-by: NShannon Nelson <snelson@pensando.io>
Reviewed-by: NJakub Kicinski <kuba@kernel.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Basically no drivers care about the return value here, and there's no
__must_check that would make casting to void sensible, so remove it.
Signed-off-by: NJason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The napi_gro_receive function no longer returns GRO_DROP ever, making
handling GRO_DROP dead code. This commit removes that dead code.
Further, it's not even clear that device drivers have any business in
taking action after passing off received packets; that's arguably out of
their hands.

Fixes: 6570bc79 ("net: core: use listified Rx for GRO_NORMAL in napi_gro_receive()")
Signed-off-by: NJason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

DMA buffers were not freed on failure path of at91ether_open().
Along with changes for freeing the DMA buffers the enable/disable
interrupt instructions were moved to at91ether_start()/at91ether_stop()
functions and the operations on at91ether_stop() were done in
their reverse order (compared with how is done in at91ether_start()):
before this patch the operation order on interface open path
was as follows:
1/ alloc DMA buffers
2/ enable tx, rx
3/ enable interrupts
and the order on interface close path was as follows:
1/ disable tx, rx
2/ disable interrupts
3/ free dma buffers.

Fixes: 7897b071 ("net: macb: convert to phylink")
Signed-off-by: NClaudiu Beznea <claudiu.beznea@microchip.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Call pm_runtime_put_sync() on failure path of at91ether_open.

Fixes: e6a41c23 ("net: macb: ensure interface is not suspended on at91rm9200")
Signed-off-by: NClaudiu Beznea <claudiu.beznea@microchip.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When commit 474ea9ca ("net: bcmgenet: correctly pad short
packets") added the call to skb_padto() it should have been
located before the nr_frags parameter was read since that value
could be changed when padding packets with lengths between 55
and 59 bytes (inclusive).

The use of a stale nr_frags value can cause corruption of the
pad data when tx-scatter-gather is enabled. This corruption of
the pad can cause invalid checksum computation when hardware
offload of tx-checksum is also enabled.

Since the original reason for the padding was corrected by
commit 7dd39913 ("net: bcmgenet: fix skb_len in
bcmgenet_xmit_single()") we can remove the software padding all
together and make use of hardware padding of short frames as
long as the hardware also always appends the FCS value to the
frame.

Fixes: 474ea9ca ("net: bcmgenet: correctly pad short packets")
Signed-off-by: NDoug Berger <opendmb@gmail.com>
Acked-by: NFlorian Fainelli <f.fainelli@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>