Minor change in shutdown logic to effect a link down.

Update version to 1.4.43.
Signed-off-by: NMichael Chan <mchan@broadcom.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Change all dev_kfree_skb_irq() and dev_kfree_skb_any() to
dev_kfree_skb().  These calls are never used in irq context.
Signed-off-by: NMichael Chan <mchan@broadcom.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NChas Williams <chas@cmf.nrl.navy.mil>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NChas Williams <chas@cmf.nrl.navy.mil>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NChas Williams <chas@cmf.nrl.navy.mil>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NChas Williams <chas@cmf.nrl.navy.mil>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Add NETIF_F_TSO_ECN feature for all bnx2 hardware.
Signed-off-by: NMichael Chan <mchan@broadcom.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

In the current TSO implementation, NETIF_F_TSO and ECN cannot be
turned on together in a TCP connection.  The problem is that most
hardware that supports TSO does not handle CWR correctly if it is set
in the TSO packet.  Correct handling requires CWR to be set in the
first packet only if it is set in the TSO header.

This patch adds the ability to turn on NETIF_F_TSO and ECN using
GSO if necessary to handle TSO packets with CWR set.  Hardware
that handles CWR correctly can turn on NETIF_F_TSO_ECN in the dev->
features flag.

All TSO packets with CWR set will have the SKB_GSO_TCPV4_ECN set.  If
the output device does not have the NETIF_F_TSO_ECN feature set, GSO
will split the packet up correctly with CWR only set in the first
segment.

With help from Herbert Xu <herbert@gondor.apana.org.au>.

Since ECN can always be enabled with TSO, the SOCK_NO_LARGESEND sock
flag is completely removed.
Signed-off-by: NMichael Chan <mchan@broadcom.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch implements an API whereby an application can determine the
label of its peer's Unix datagram sockets via the auxiliary data mechanism of
recvmsg.

Patch purpose:

This patch enables a security-aware application to retrieve the
security context of the peer of a Unix datagram socket.  The application
can then use this security context to determine the security context for
processing on behalf of the peer who sent the packet.

Patch design and implementation:

The design and implementation is very similar to the UDP case for INET
sockets.  Basically we build upon the existing Unix domain socket API for
retrieving user credentials.  Linux offers the API for obtaining user
credentials via ancillary messages (i.e., out of band/control messages
that are bundled together with a normal message).  To retrieve the security
context, the application first indicates to the kernel such desire by
setting the SO_PASSSEC option via getsockopt.  Then the application
retrieves the security context using the auxiliary data mechanism.

An example server application for Unix datagram socket should look like this:

toggle = 1;
toggle_len = sizeof(toggle);

setsockopt(sockfd, SOL_SOCKET, SO_PASSSEC, &toggle, &toggle_len);
recvmsg(sockfd, &msg_hdr, 0);
if (msg_hdr.msg_controllen > sizeof(struct cmsghdr)) {
    cmsg_hdr = CMSG_FIRSTHDR(&msg_hdr);
    if (cmsg_hdr->cmsg_len <= CMSG_LEN(sizeof(scontext)) &&
        cmsg_hdr->cmsg_level == SOL_SOCKET &&
        cmsg_hdr->cmsg_type == SCM_SECURITY) {
        memcpy(&scontext, CMSG_DATA(cmsg_hdr), sizeof(scontext));
    }
}

sock_setsockopt is enhanced with a new socket option SOCK_PASSSEC to allow
a server socket to receive security context of the peer.

Testing:

We have tested the patch by setting up Unix datagram client and server
applications.  We verified that the server can retrieve the security context
using the auxiliary data mechanism of recvmsg.
Signed-off-by: NCatherine Zhang <cxzhang@watson.ibm.com>
Acked-by: NAcked-by: James Morris <jmorris@namei.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The test in skb_gso_ok is backwards.  Noticed by Michael Chan
<mchan@broadcom.com>.
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
Acked-by: NMichael Chan <mchan@broadcom.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NShuya MAEDA <maeda-sxb@necst.nec.co.jp>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Rather than having illegal_highdma as a macro when HIGHMEM is off, we
can turn it into an inline function that returns zero.  This will catch
callers that give it bad arguments.
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

While debugging a TCP server hang issue, we noticed that currently there is
no way for a user to get the acceptq backlog value for a TCP listen socket.

All the standard networking utilities that display socket info like netstat,
ss and /proc/net/tcp have 2 fields called rx_queue and tx_queue. These
fields do not mean much for listening sockets. This patch uses one of these
unused fields(rx_queue) to export the accept queue len for listening sockets.
Signed-off-by: NSridhar Samudrala <sri@us.ibm.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch encapsulates the usage of eff_cap (in netlink_skb_params) within
the security framework by extending security_netlink_recv to include a required
capability parameter and converting all direct usage of eff_caps outside
of the lsm modules to use the interface.  It also updates the SELinux
implementation of the security_netlink_send and security_netlink_recv
hooks to take advantage of the sid in the netlink_skb_params struct.
This also enables SELinux to perform auditing of netlink capability checks.
Please apply, for 2.6.18 if possible.
Signed-off-by: NDarrel Goeddel <dgoeddel@trustedcs.com>
Signed-off-by: NStephen Smalley <sds@tycho.nsa.gov>
Acked-by: NJames Morris <jmorris@namei.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When GSO packets come from an untrusted source (e.g., a Xen guest domain),
we need to verify the header integrity before passing it to the hardware.

Since the first step in GSO is to verify the header, we can reuse that
code by adding a new bit to gso_type: SKB_GSO_DODGY.  Packets with this
bit set can only be fed directly to devices with the corresponding bit
NETIF_F_GSO_ROBUST.  If the device doesn't have that bit, then the skb
is fed to the GSO engine which will allow the packet to be sent to the
hardware if it passes the header check.

This patch changes the sg flag to a full features flag.  The same method
can be used to implement TSO ECN support.  We simply have to mark packets
with CWR set with SKB_GSO_ECN so that only hardware with a corresponding
NETIF_F_TSO_ECN can accept them.  The GSO engine can either fully segment
the packet, or segment the first MTU and pass the rest to the hardware for
further segmentation.
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NPatrick McHardy <kaber@trash.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When a device that is acting as a bridge port is unregistered, the
ip_queue/nfnetlink_queue notifier doesn't check if its one of
physindev/physoutdev and doesn't release the references if it is.
Signed-off-by: NPatrick McHardy <kaber@trash.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

xt_sctp uses an incorrect header offset when --chunk-types is used.
Signed-off-by: NJorge Matias <jorge.matias@motorola.com>
Signed-off-by: NPatrick McHardy <kaber@trash.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

"xt_unregister_match(AF_INET, &tcp_matchstruct)" is called twice,
leaving "udp_matchstruct" registered, in case of a failure in the
registration of the udp6 structure.
Signed-off-by: NYuri Gushin <yuri@ecl-labs.org>
Signed-off-by: NPatrick McHardy <kaber@trash.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

  CC      net/netfilter/nf_conntrack_proto_sctp.o
net/netfilter/nf_conntrack_proto_sctp.c: In function `sctp_print_conntrack':
net/netfilter/nf_conntrack_proto_sctp.c:206: warning: implicit declaration of function `local_bh_disable'
net/netfilter/nf_conntrack_proto_sctp.c:208: warning: implicit declaration of function `local_bh_enable'
  CC      net/netfilter/nf_conntrack_netlink.o
net/netfilter/nf_conntrack_netlink.c: In function `ctnetlink_dump_table':
net/netfilter/nf_conntrack_netlink.c:429: warning: implicit declaration of function `local_bh_disable'
net/netfilter/nf_conntrack_netlink.c:452: warning: implicit declaration of function `local_bh_enable'

Spotted by Toralf Förster
Signed-off-by: NYasuyuki Kozakai <yasuyuki.kozakai@toshiba.co.jp>
Signed-off-by: NPatrick McHardy <kaber@trash.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When xt_register_table fails the error is not properly propagated back.
Based on patch by Lepton Wu <ytht.net@gmail.com>.
Signed-off-by: NPatrick McHardy <kaber@trash.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This fixes pxa2xx_udc.c to include asm/arch/udc.h again to fix current
build breakage.
Signed-off-by: NMilan Svoboda <msvoboda@ra.rockwell.com>
[ forwarded by David Brownell <david-b@pacbell.net> ]
[ fixed to apply properly by Linus ]
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/devfs-2.6: (22 commits)
  [PATCH] devfs: Remove it from the feature_removal.txt file
  [PATCH] devfs: Last little devfs cleanups throughout the kernel tree.
  [PATCH] devfs: Rename TTY_DRIVER_NO_DEVFS to TTY_DRIVER_DYNAMIC_DEV
  [PATCH] devfs: Remove the tty_driver devfs_name field as it's no longer needed
  [PATCH] devfs: Remove the line_driver devfs_name field as it's no longer needed
  [PATCH] devfs: Remove the videodevice devfs_name field as it's no longer needed
  [PATCH] devfs: Remove the gendisk devfs_name field as it's no longer needed
  [PATCH] devfs: Remove the miscdevice devfs_name field as it's no longer needed
  [PATCH] devfs: Remove the devfs_fs_kernel.h file from the tree
  [PATCH] devfs: Remove devfs_remove() function from the kernel tree
  [PATCH] devfs: Remove devfs_mk_cdev() function from the kernel tree
  [PATCH] devfs: Remove devfs_mk_bdev() function from the kernel tree
  [PATCH] devfs: Remove devfs_mk_symlink() function from the kernel tree
  [PATCH] devfs: Remove devfs_mk_dir() function from the kernel tree
  [PATCH] devfs: Remove devfs_*_tape() functions from the kernel tree
  [PATCH] devfs: Remove devfs support from the sound subsystem
  [PATCH] devfs: Remove devfs support from the ide subsystem.
  [PATCH] devfs: Remove devfs support from the serial subsystem
  [PATCH] devfs: Remove devfs from the init code
  [PATCH] devfs: Remove devfs from the partition code
  ...

* master.kernel.org:/pub/scm/linux/kernel/git/davej/agpgart:
  [AGPGART] Make AGP depend on PCI
  [AGPGART] remove unused variable
  [AGPGART] Fix pci_register_driver checking in amd64-agp
  [AGPGART] Compile fix for ati-agp
  [AGPGART] Suspend/Resume support for nVidia nForce AGP.
  [AGPGART] Suspend/Resume improvements for ATI AGP
  [AGPGART] Whitespace cleanups for ati-agp

* 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus: (33 commits)
  [MIPS] Add missing backslashes to macro definitions.
  [MIPS] Death list of board support to be removed after 2.6.18.
  [MIPS] Remove BSD and Sys V compat data types.
  [MIPS] ioc3.h: Uses u8, so include <linux/types.h>.
  [MIPS] 74K: Assume it will also have an AR bit in config7
  [MIPS] Treat CPUs with AR bit as physically indexed.
  [MIPS] Oprofile: Support VSMP on 34K.
  [MIPS] MIPS32/MIPS64 S-cache fix and cleanup
  [MIPS] excite: PCI makefile needs to use += if it wants a chance to work.
  [MIPS] excite: plat_setup -> plat_mem_setup.
  [MIPS] au1xxx: export dbdma functions
  [MIPS] au1xxx: dbdma, no sleeping under spin_lock
  [MIPS] au1xxx: fix PSC_SMBTXRX_RSR.
  [MIPS] Early printk for IP27.
  [MIPS] Fix handling of 0 length I & D caches.
  [MIPS] Typo fixes.
  [MIPS] MIPS32/MIPS64 secondary cache management
  [MIPS] Fix FIXADDR_TOP for TX39/TX49.
  [MIPS] Remove first timer interrupt setup in wrppmc_timer_setup()
  [MIPS] Fix configuration of R2 CPU features and multithreading.
  ...

Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

As usual fixes would be prefered.
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Use blast_scache_range, blast_inv_scache_range for mips32/mips64 scache
routine.  Also initialize waybit for MIPS32/MIPS64 S-cache.
Signed-off-by: NAtsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

These are needed for au1550_ac97 module.
Signed-off-by: NDomen Puncer <domen.puncer@ultra.si>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

kmalloc under spin_lock can't sleep.
Signed-off-by: NDomen Puncer <domen.puncer@ultra.si>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Signed-off-by: NDomen Puncer <domen.puncer@ultra.si>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Don't ask.
Signed-off-by: NChris Dearman <chris@mips.com>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>