The driver supports a single VLAN-aware bridge. Test that the
enslavement of a port to the second VLAN-aware bridge fails with an
extack.
Signed-off-by: NIdo Schimmel <idosch@mellanox.com>
Acked-by: NJiri Pirko <jiri@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Test that creation of a bridge (both VLAN-aware and VLAN-unaware) fails
with an extack when a VXLAN device with an unsupported configuration is
already enslaved to it.
Signed-off-by: NIdo Schimmel <idosch@mellanox.com>
Acked-by: NJiri Pirko <jiri@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The addition of a VLAN on a bridge slave prompts the driver to have the
local port in question join the FID corresponding to this VLAN.

Before recent changes, the operation of joining the FID would also mean
that the driver would enable VXLAN tunneling if a VXLAN device was also
member in the VLAN. In case the configuration of the VXLAN tunnel was
not supported, an extack error would be returned.

Since the operation of joining the FID no longer means that VXLAN
tunneling is potentially enabled, the test is no longer relevant. Remove
it.
Signed-off-by: NIdo Schimmel <idosch@mellanox.com>
Acked-by: NJiri Pirko <jiri@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Commit f40be47a ("mlxsw: spectrum_router: Do not force specific
configuration order") added a call from the routing code to the bridge
code in order to handle the case where VNI should be set on a FID
following the joining of the router port to the FID.

This is no longer required, as previous patches made VXLAN devices
explicitly take a reference on the FID and set VNI on it.

Therefore, remove the unnecessary call and simply have the RIF take a
reference on the FID without checking if VNI should also be set on it.
Signed-off-by: NIdo Schimmel <idosch@mellanox.com>
Acked-by: NJiri Pirko <jiri@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

As explained in previous patch, VXLAN devices now take a reference on
the FID and not only local ports. Therefore, there is no need for local
ports to check if they need to set a VNI on the FID when they join the
FID.

Remove these unnecessary checks.
Signed-off-by: NIdo Schimmel <idosch@mellanox.com>
Acked-by: NJiri Pirko <jiri@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Up until now only local ports and the router port (which is also a local
port) took a reference on the corresponding FID (Filtering Identifier)
when joining a bridge. For example:

        192.0.2.1/24
            br0
             |
      +------+------+
      |             |
     swp1        vxlan0

In this case the reference count of the FID will be '2'. Since the VXLAN
device does not take a reference on the FID, whenever a local port joins
the bridge it needs to check if a VXLAN device is already enslaved. If
the VXLAN device should be mapped to the FID in question, then the VXLAN
device's VNI is set on the FID.

Beside the fact that this scheme special-cases the VXLAN device, it also
creates an unnecessary dependency between the routing and bridge code:

1. [R] IP address is added on 'br0', which prompts the creation of a RIF
   and a backing FID
2. [B] VNI is enabled on backing FID
3. [R] Host route corresponding to VXLAN device's source address is
   promoted to perform NVE decapsulation

[R] - Routing code
[B] - Bridge code

This back and forth dependency will become problematic when a lock is
added in the routing code instead of relying on RTNL, as it will result
in an AA deadlock.

Instead, have the VXLAN device take a reference on the FID just like all
the other netdev members of the bridge. In order to correctly handle the
case where VXLAN devices are already enslaved to the bridge when it is
offloaded, walk the bridge's slaves and replay the configuration.
Signed-off-by: NIdo Schimmel <idosch@mellanox.com>
Acked-by: NJiri Pirko <jiri@mellanox.com>
Reviewed-by: NPetr Machata <petrm@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Propagate extack to bridge creation function so that error messages
could be passed to user space via netlink instead of printing them to
kernel log.

A subsequent patch will pass the new extack argument to more functions.
Signed-off-by: NIdo Schimmel <idosch@mellanox.com>
Acked-by: NJiri Pirko <jiri@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

'refcount_t' is very useful for catching over/under flows. Convert the
FID (Filtering Identifier) objects to use it instead of 'unsigned int'
for their reference count.

A subsequent patch in the series will change the way VXLAN devices hold
/ release the FID reference, which is why the conversion is made now.
Signed-off-by: NIdo Schimmel <idosch@mellanox.com>
Acked-by: NJiri Pirko <jiri@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This enables ndo_dflt_bridge_getlink() to report a bridge port's
offload settings for multicast and broadcast flooding.

CC: Roopa Prabhu <roopa@cumulusnetworks.com>
CC: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: NJulian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Edward Cree says:

====================
couple more ARFS tidy-ups

Tie up some loose ends from the recent ARFS work.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

efx_filter_rfs_expire() is a work-function, so it being inline makes no
 sense.  It's only ever used in efx_channels.c, so move it there.
While we're at it, clean out some related unused cruft.
Signed-off-by: NEdward Cree <ecree@solarflare.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Prevent excessive CPU time spent running a workitem with nothing to do.

We avoid any races by keeping the same check in efx_filter_rfs_expire().
Suggested-by: NMartin Habets <mhabets@solarflare.com>
Signed-off-by: NEdward Cree <ecree@solarflare.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When a real dev unregisters, vlan_device_event() also unregisters all
of its vlan interfaces. For each VID this ends up in __vlan_vid_del(),
which attempts to remove the VID from the real dev's VLAN filter.

But the unregistering real dev might no longer be able to issue the
required IOs, and return an error. Subsequently we raise a noisy warning
msg that is not appropriate for this situation: the real dev is being
torn down anyway, there shouldn't be any worry about cleanly releasing
all of its HW-internal resources.

So to avoid scaring innocent users, suppress this warning when the
failed deletion happens on an unregistering device.
While at it also convert the raw pr_warn() to a more fitting
netdev_warn().
Signed-off-by: NJulian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Since PCI core provides a generic PCI_DEVICE_DATA() macro,
replace STMMAC_DEVICE() with former one.

No functional change intended.
Signed-off-by: NAndy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Vlad Buslov says:

====================
Remove rtnl lock dependency from flow_action infra

Currently, TC flow_action infrastructure code obtain rtnl lock before
accessing action state in tc_setup_flow_action() function and releases
it afterwards. This behavior is not supposed to impact TC filter
insertion rate because filling flow_action representation is only a
small part of creating new filter and expensive operations (hardware
offload callbacks, classifiers, cls API code that creates chains and
classifiers instances) already support unlocked execution. However,
typical vswitch implementation might need to also dump TC filters
concurrently, for example to age out unused flows or update flow
counters. TC dump is fully serialized and holds rtnl lock during its
whole execution in kernel space. As such, it can significantly impact
concurrent tasks that try to intermittently obtain rtnl lock when
filling intermediate representation for new filter offload (performance
evaluation at the end of this mail).

Refactor flow_action cls API infrastructure and its dependencies to not
rely on rtnl lock for synchronization. Patch set overview:

- Refactor tc_setup_flow_action() to obtain action tcf_lock when
  accessing action state. Fix its dependencies to not obtain tcf_lock
  themselves and assume that caller already holds it (needs to be done
  in same patch to prevent deadlock) and not to call sleeping functions
  (needs to be done in same patch to prevent "sleeping while atomic"
  dmesg warnings).

- Refactor action helper functions to require tcf_lock instead of rtnl.
  Internally, all of the actions already use tcf_lock for
  synchronization to accommodate unlocked classifier API, so this change
  relies on already existing functionality.

- Remove rtnl lock and "rtnl_held" argument from tc_setup_flow_action()
  function.

To test the change, multiple concurrent TC instances are invoked with
following command:

time ls add* | xargs -n 1 -P 100 sudo tc -b

Ten batch files with following typical rules (100k each) are used:

filter add dev ens1f0_0 protocol ip ingress prio 1 handle 1 flower
	src_mac e4:11:0:0:0:0 dst_mac e4:12:0:0:0:0 src_ip 192.168.111.1
	dst_ip 192.168.111.2 ip_proto udp dst_port 1 src_port 1 action
	tunnel_key set id 1 src_ip 2.2.2.2 dst_ip 2.2.2.3 dst_port 4789
	no_percpu action mirred egress redirect dev vxlan1 no_percpu

TC dump of same device is called in infinite loop from five concurrent
instances:

while true do tc -s filter show dev $NIC ingress >/dev/null done

Results obtained on current net-next commit 9f68e365 ("Merge tag
'drm-next-2020-01-30' of git://anongit.freedesktop.org/drm/drm"):

               | net-next | this change
---------------+----------+-------------
 TC add        | 6.3s     | 6.3s
 TC add + dump | 29.3s    | 6.8s

Test results confirm significant impact of concurrent TC dump. The
impact is almost fully mitigated by proposed change (differences can be
attributed to contention for chain and tp locks between add and dump TC
instances).
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Refactor tc_setup_flow_action() function not to use rtnl lock and remove
'rtnl_held' argument that is no longer needed.
Signed-off-by: NVlad Buslov <vladbu@mellanox.com>
Acked-by: NJiri Pirko <jiri@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

In order to remove rtnl lock dependency from flow_action representation
translator, change rtnl_dereference() to rcu_dereference_protected() in ct
action helpers that provide external access to zone and action values. This
is safe to do because the functions are not called from anywhere else
outside flow_action infrastructure which was modified to obtain tcf_lock
when accessing action data in one of previous patches in the series.
Signed-off-by: NVlad Buslov <vladbu@mellanox.com>
Acked-by: NJiri Pirko <jiri@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

In order to remove rtnl lock dependency from flow_action representation
translator, change rcu_dereference_bh_rtnl() to rcu_dereference_protected()
in police action helpers that provide external access to rate and burst
values. This is safe to do because the functions are not called from
anywhere else outside flow_action infrastructure which was modified to
obtain tcf_lock when accessing action data in one of previous patches in
the series.
Signed-off-by: NVlad Buslov <vladbu@mellanox.com>
Acked-by: NJiri Pirko <jiri@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

In order to remove dependency on rtnl lock, take action's tcfa_lock when
constructing its representation as flow_action_entry structure.

Refactor tcf_sample_get_group() to assume that caller holds tcf_lock and
don't take it manually. This callback is only called from flow_action infra
representation translator which now calls it with tcf_lock held, so this
refactoring is necessary to prevent deadlock.

Allocate memory with GFP_ATOMIC flag for ip_tunnel_info copy because
tcf_tunnel_info_copy() is only called from flow_action representation infra
code with tcf_lock spinlock taken.
Signed-off-by: NVlad Buslov <vladbu@mellanox.com>
Acked-by: NJiri Pirko <jiri@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Lorenzo Bianconi says:

====================
add xdp ethtool stats to mvneta driver

Rework mvneta stats accounting in order to introduce xdp ethtool
statistics in the mvneta driver.
Introduce xdp_redirect, xdp_pass, xdp_drop and xdp_tx counters to
ethtool statistics.
Fix skb_alloc_error and refill_error ethtool accounting
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Get rid of xdp_ret in mvneta_swbm_rx_frame routine since now
we can rely on xdp_stats to flush in case of xdp_redirect
Signed-off-by: NLorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Add xdp_redirect, xdp_pass, xdp_drop and xdp_tx counters
to ethtool statistics
Signed-off-by: NLorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Introduce mvneta_stats structure in mvneta_update_stats routine signature
in order to collect all the rx stats and update them at the end at the
napi loop. mvneta_stats will be reused adding xdp statistics support to
ethtool.
Signed-off-by: NLorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

In oreder to avoid unnecessary instructions rely on open-coding updating
per-cpu stats in mvneta_tx/mvneta_xdp_submit_frame and mvneta_rx_hwbm
routines. This patch will be used to add xdp support to ethtool for the
mvneta driver
Signed-off-by: NLorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

mvneta_ethtool_update_stats routine is currently reporting
skb_alloc_error and refill_error only for the first rx queue.
Fix the issue moving skb_alloc_err and refill_err in
mvneta_pcpu_stats structure.
Moreover this patch will be used to introduce xdp statistics
to ethtool for the mvneta driver

Fixes: 17a96da6 ("net: mvneta: discriminate error cause for missed packet")
Signed-off-by: NLorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Andrew Lunn says:

====================
mv88e6xxx: Add SERDES/PCS registers to ethtool -d

ethtool -d will dump the registers of an interface. For mv88e6xxx
switch ports, this dump covers the port specific registers. Extend
this with the SERDES/PCS registers, if a port has a SERDES.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The mv88e6390 has upto 8 sets of PCS registers, depending on how ports
9 and 10 are configured. The can be spread over 8 ports. If a port has
a PCS register set, return it along with the port registers. The
register space is sparse, so hard code a list of registers which will
be returned. It can later be extended, if needed, by append to the end
of the list.
Signed-off-by: NAndrew Lunn <andrew@lunn.ch>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The mv88e6352 has one PCS which can be used for 1000BaseX or
SGMII. Add the registers to the dump for the port which the PCS is
associated to.
Signed-off-by: NAndrew Lunn <andrew@lunn.ch>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

ethtool provides a generic mechanism for a driver to return the
registers of an ethernet device. DSA uses this to give the port
registers associated with an interfaces. Extend this to allow PCS
registers to also be returned, if the port has a PCS associated to it.
Signed-off-by: NAndrew Lunn <andrew@lunn.ch>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Jeff Kirsher says:

====================
100GbE Intel Wired LAN Driver Updates 2020-02-15

This series contains updates to ice driver only.

Brett adds support for "Queue in Queue" (QinQ) support, by supporting
S-tag & C-tag VLAN traffic by disabling pruning when there are no 0x8100
VLAN interfaces currently on top of the PF.  Also refactored the port
VLAN configuration to re-use the common code for enabling and disabling
a port VLAN in single function.  Added a helper function to determine if
the VF link is up.  Fixed how the port VLAN configures the priority bits
for a VF interface.  Fixed the port VLAN to only see its own broadcast
and multicast traffic.  Added support to enable and disable all receive
queues, by refactoring adding a new function to do the necessary steps
to enable/disable a queue with the necessary read flush.  Fixed how we
set the mapping mode for transmit and receive queues.  Added support for
VF queues to handle LAN overflow events.  Fixed and refactored how
receive queues get disabled for VFs, which was being handled one queue
at at time, so improve it to handle when the VF is requesting more than
one queue to be disabled.  Fixed how the virtchnl_queue_select bitmap is
validated.

Finally a patch not authored by Brett, Bruce cleans up "fallthrough"
comments which are unnecessary.  Also replaces the "fallthough" comments
with the GCC reserved word fallthrough, along with other GCC compiler
fixes.  Add missing function header comment regarding a function
argument that was missing.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Finn Thain says:

====================
Improvements for SONIC ethernet drivers

Now that the necessary sonic driver fixes have been merged, and the merge
window has closed again, I'm sending the remainder of my sonic driver
patch queue.

A couple of these patches will have to be applied in sequence to avoid
'git am' rejects. The others are independent and could have been submitted
individually. Please let me know if I should do that.

The complete sonic driver patch queue was tested on National Semiconductor
hardware (macsonic), qemu-system-m68k (macsonic) and qemu-system-mips64el
(jazzsonic).
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

On m68k, local irqs remain enabled while interrupt handlers execute.
Therefore the macsonic driver has had to disable interrupts to avoid
re-entering sonic_interrupt().

As of commit 865ad2f2 ("net/sonic: Add mutual exclusion for accessing
shared state"), sonic_interrupt() became re-entrant, and its wrapper
became redundant.
Tested-by: NStan Johnson <userm57@yahoo.com>
Signed-off-by: NFinn Thain <fthain@telegraphics.com.au>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Give the transmit command as soon as the transmit descriptor is ready.
Tested-by: NStan Johnson <userm57@yahoo.com>
Signed-off-by: NFinn Thain <fthain@telegraphics.com.au>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The explicit memory barriers are redundant now that proper locking and
MMIO accessors have been employed.
Tested-by: NStan Johnson <userm57@yahoo.com>
Signed-off-by: NFinn Thain <fthain@telegraphics.com.au>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The transmit queue must be running already otherwise sonic_send_packet()
would not have been called. If the queue was stopped by the interrupt
handler, the interrupt handler will restart it again.
Tested-by: NStan Johnson <userm57@yahoo.com>
Signed-off-by: NFinn Thain <fthain@telegraphics.com.au>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The eol_tx variable is the one that matters to the tx algorithm because
packets are always placed at the end of the list. The next_tx variable
just confuses things so remove it.
Tested-by: NStan Johnson <userm57@yahoo.com>
Signed-off-by: NFinn Thain <fthain@telegraphics.com.au>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

No functional change.
Tested-by: NStan Johnson <userm57@yahoo.com>
Signed-off-by: NFinn Thain <fthain@telegraphics.com.au>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The comment is meaningless since mark_bh() was removed a long time ago.
Tested-by: NStan Johnson <userm57@yahoo.com>
Signed-off-by: NFinn Thain <fthain@telegraphics.com.au>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Sergei Shtylyov says:

====================
sh_eth: get rid of the dedicated regiseter mapping for RZ/A1 (R7S72100)

Here's a set of 5 patches against DaveM's 'net-next.git' repo.

I changed my mind about the RZ/A1 SoC needing its own register
map -- now that we don't depend on the register map array in order
to determine whether a given register exists any more, we can add
a new flag to determine if the GECMR exists (this register is
present only on true GEther chips, not RZ/A1). We also need to
add the sh_eth_cpu_data::* flag checks where they were missing
so far: in the ethtool API for the register dump.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The register maps for the Gigabit controllers and the Ether one used on
RZ/A1  (AKA R7S72100) are identical except for GECMR which is only present
on the true GEther controllers.  We no longer use the register map arrays
to determine if a given register exists,  and have added the GECMR flag to
the 'struct sh_eth_cpu_data' in the previous patch, so we're ready to drop
the R7S72100 specific register map -- this saves 216 bytes of object code
(ARM gcc 4.8.5).
Signed-off-by: NSergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Tested-by: NChris Brandt <chris.brandt@renesas.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>