hulk inclusion
category: bugfix
bugzilla: https://gitee.com/src-openeuler/kernel/issues/I5WFKI
CVE: CVE-2022-2602

--------------------------------

In order to fix CVE-2022-2602, member 'scm_io_uring' is imported into
sk_buff, fix broken kabi in sk_buff.
Signed-off-by: NZhihao Cheng <chengzhihao1@huawei.com>
Reviewed-by: NXiu Jianfeng <xiujianfeng@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

mainline inclusion
from mainline-v6.1-rc1
commit 0091bfc8
category: bugfix
bugzilla: https://gitee.com/src-openeuler/kernel/issues/I5WFKI
CVE: CVE-2022-2602

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit?h=v6.1-rc1&id=0091bfc81741b8d3aeb3b7ab8636f911b2de6e80

--------------------------------

Instead of putting io_uring's registered files in unix_gc() we want it
to be done by io_uring itself. The trick here is to consider io_uring
registered files for cycle detection but not actually putting them down.
Because io_uring can't register other ring instances, this will remove
all refs to the ring file triggering the ->release path and clean up
with io_ring_ctx_free().

Cc: stable@vger.kernel.org
Fixes: 6b06314c ("io_uring: add file set registration")
Reported-and-tested-by: NDavid Bouman <dbouman03@gmail.com>
Signed-off-by: NPavel Begunkov <asml.silence@gmail.com>
Signed-off-by: NThadeu Lima de Souza Cascardo <cascardo@canonical.com>
[axboe: add kerneldoc comment to skb, fold in skb leak fix]
Signed-off-by: NJens Axboe <axboe@kernel.dk>
Conflicts:
	fs/io_uring.c
	include/linux/skbuff.h
Signed-off-by: NZhihao Cheng <chengzhihao1@huawei.com>
Reviewed-by: Nzhongbaisong <zhongbaisong@huawei.com>
Reviewed-by: NYue Haibing <yuehaibing@huawei.com>
Reviewed-by: NXiu Jianfeng <xiujianfeng@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

stable inclusion
from stable-v6.1-rc1
commit 2568a7e0
category: bugfix
bugzilla: https://gitee.com/src-openeuler/kernel/issues/I5W7YH
CVE: CVE-2022-3565

Reference: https://nvd.nist.gov/vuln/detail/CVE-2022-3565
Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=2568a7e0832ee30b0a351016d03062ab4e0e0a3f

--------------------------------

The l1oip_cleanup() traverses the l1oip_ilist and calls
release_card() to cleanup module and stack. However,
release_card() calls del_timer() to delete the timers
such as keep_tl and timeout_tl. If the timer handler is
running, the del_timer() will not stop it and result in
UAF bugs. One of the processes is shown below:

    (cleanup routine)          |        (timer handler)
release_card()                 | l1oip_timeout()
 ...                           |
 del_timer()                   | ...
 ...                           |
 kfree(hc) //FREE              |
                               | hc->timeout_on = 0 //USE

Fix by calling del_timer_sync() in release_card(), which
makes sure the timer handlers have finished before the
resources, such as l1oip and so on, have been deallocated.

What's more, the hc->workq and hc->socket_thread can kick
those timers right back in. We add a bool flag to show
if card is released. Then, check this flag in hc->workq
and hc->socket_thread.

Fixes: 3712b42d ("Add layer1 over IP support")
Signed-off-by: NDuoming Zhou <duoming@zju.edu.cn>
Reviewed-by: NLeon Romanovsky <leonro@nvidia.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NGUO Zihua <guozihua@huawei.com>
Reviewed-by: NGONG Ruiqi <gongruiqi1@huawei.com>
Reviewed-by: NWang Weiyang <wangweiyang2@huawei.com>
Reviewed-by: NXiu Jianfeng <xiujianfeng@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

hulk inclusion
category: bugfix
bugzilla: https://gitee.com/openeuler/kernel/issues/I5WQRM
CVE: NA

--------------------------------

This patch add 'enable_fm' as 5th module init parameters to control
fastmap  enable or not. When the value is 0, fastmap will not create
and existed fastmap will destroyed for the given ubi device. Default
value is 0.

To enable or disable fastmap during module loading, fm_autoconvert
must be set to non-zero.

+-----------------+---------------+---------------------------+
|        \        |  enable_fm=0  |  enable_fm=1              |
+-----------------+---------------+---------------------------+
|fm_autoconvert=Y |  disable fm   |  enable fm                |
+---------------------------------+---------------------------+
|fm_autoconvert=N |  disable fm   | Enable fastmap. If fastmap|
|                 |               | exists in the old image,  |
+------------------------------------------------------------ +

Example:
  # - Attach mtd1 to ubi1, disable fastmap, mtd2 to ubi2, enable
      fastmap.
  # modprobe ubi mtd=1,0,0,1,0 mtd=2,0,0,2,1 fm_autoconvert=1

  # - If 5th parameter is not specified, the value is 0, fastmap is
      disable
  # modprobe ubi mtd=1 fm_autoconvert=1
Signed-off-by: NZhaoLong Wang <wangzhaolong1@huawei.com>
Reviewed-by: NZhihao Cheng <chengzhihao1@huawei.com>
Reviewed-by: NZhang Yi <yi.zhang@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

mainline inclusion
from mainline-v6.1-rc1
commit 669d2044
category: bugfix
bugzilla: https://gitee.com/openeuler/kernel/issues/I5WQRM
CVE: NA

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=669d204469c46e91d99da24914130f78277a71d3

--------------------------------

[1] suggests that fastmap is suitable for large flash devices. Module
parameter 'fm_autoconvert' is a coarse grained switch to enable all
ubi devices to generate fastmap, which may turn on fastmap even for
small flash devices.

This patch imports a new field 'disable_fm' in struct 'ubi_attach_req'
to support following situations by ioctl 'UBI_IOCATT'.
 [old functions]
 A. Disable 'fm_autoconvert': Disbable fastmap for all ubi devices
 B. Enable 'fm_autoconvert': Enable fastmap for all ubi devices
 [new function]
 C. Enable 'fm_autoconvert', set 'disable_fm' for given device: Don't
    create new fastmap and do full scan (existed fastmap will be
    destroyed) for the given ubi device.

A simple test case in [2].

[1] http://www.linux-mtd.infradead.org/doc/ubi.html#L_fastmap
[2] https://bugzilla.kernel.org/show_bug.cgi?id=216278Signed-off-by: NZhihao Cheng <chengzhihao1@huawei.com>
Signed-off-by: NRichard Weinberger <richard@nod.at>
Reviewed-by: NZhihao Cheng <chengzhihao1@huawei.com>
Reviewed-by: NZhang Yi <yi.zhang@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

mainline inclusion
from mainline-6.1-rc1
commit 364f997b
category: bugfix
bugzilla: https://gitee.com/src-openeuler/kernel/issues/I5W7YP
CVE: CVE-2022-3567

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=364f997b5cfe1db0d63a390fe7c801fa2b3115f6

---------------------------

Commit 086d4905 ("ipv6: annotate some data-races around sk->sk_prot")
fixed some data-races around sk->sk_prot but it was not enough.

Some functions in inet6_(stream|dgram)_ops still access sk->sk_prot
without lock_sock() or rtnl_lock(), so they need READ_ONCE() to avoid
load tearing.

Fixes: 1da177e4 ("Linux-2.6.12-rc2")
Signed-off-by: NKuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: NJakub Kicinski <kuba@kernel.org>
Signed-off-by: NLiu Jian <liujian56@huawei.com>

Conflicts:
	net/ipv6/ipv6_sockglue.c
Reviewed-by: NYue Haibing <yuehaibing@huawei.com>
Reviewed-by: NXiu Jianfeng <xiujianfeng@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

stable inclusion
from stable-v5.10.134
commit 2ee0cab11f6626071f8a64c7792406dabdd94c8d
category: bugfix
bugzilla: 187845, https://gitee.com/src-openeuler/kernel/issues/I5UDNW
CVE: CVE-2022-20409

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=2ee0cab11f6626071f8a64c7792406dabdd94c8d

--------------------------------

This issue is conceptually identical to the one fixed in 29f077d07051
("io_uring: always use original task when preparing req identity"), so
rather than reinvent the wheel, I'm shamelessly quoting the commit
message from that patch - thanks Jens:

 "If the ring is setup with IORING_SETUP_IOPOLL and we have more than
  one task doing submissions on a ring, we can up in a situation where
  we assign the context from the current task rather than the request
  originator.

  Always use req->task rather than assume it's the same as current.

  No upstream patch exists for this issue, as only older kernels with
  the non-native workers have this problem."

Cc: Jens Axboe <axboe@kernel.dk>
Cc: Pavel Begunkov <asml.silence@gmail.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: io-uring@vger.kernel.org
Cc: linux-fsdevel@vger.kernel.org
Fixes: 5c3462cf ("io_uring: store io_identity in io_uring_task")
Signed-off-by: NLee Jones <lee@kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NLi Lingfeng <lilingfeng3@huawei.com>
Reviewed-by: NZhang Yi <yi.zhang@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

mainline inclusion
from mainline-v6.1-rc1
commit f49cd2f4
category: bugfix
bugzilla: https://gitee.com/src-openeuler/kernel/issues/I5W7ZF?from=project-issue
CVE: CVE-2022-3566

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next.git/commit/?id=f49cd2f4d6170d27a2c61f1fecb03d8a70c91f57

--------------------------------

setsockopt(IPV6_ADDRFORM) and tcp_v6_connect() change icsk->icsk_af_ops
under lock_sock(), but tcp_(get|set)sockopt() read it locklessly.  To
avoid load/store tearing, we need to add READ_ONCE() and WRITE_ONCE()
for the reads and writes.

Thanks to Eric Dumazet for providing the syzbot report:

BUG: KCSAN: data-race in tcp_setsockopt / tcp_v6_connect

write to 0xffff88813c624518 of 8 bytes by task 23936 on cpu 0:
tcp_v6_connect+0x5b3/0xce0 net/ipv6/tcp_ipv6.c:240
__inet_stream_connect+0x159/0x6d0 net/ipv4/af_inet.c:660
inet_stream_connect+0x44/0x70 net/ipv4/af_inet.c:724
__sys_connect_file net/socket.c:1976 [inline]
__sys_connect+0x197/0x1b0 net/socket.c:1993
__do_sys_connect net/socket.c:2003 [inline]
__se_sys_connect net/socket.c:2000 [inline]
__x64_sys_connect+0x3d/0x50 net/socket.c:2000
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x2b/0x70 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd

read to 0xffff88813c624518 of 8 bytes by task 23937 on cpu 1:
tcp_setsockopt+0x147/0x1c80 net/ipv4/tcp.c:3789
sock_common_setsockopt+0x5d/0x70 net/core/sock.c:3585
__sys_setsockopt+0x212/0x2b0 net/socket.c:2252
__do_sys_setsockopt net/socket.c:2263 [inline]
__se_sys_setsockopt net/socket.c:2260 [inline]
__x64_sys_setsockopt+0x62/0x70 net/socket.c:2260
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x2b/0x70 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd

value changed: 0xffffffff8539af68 -> 0xffffffff8539aff8

Reported by Kernel Concurrency Sanitizer on:
CPU: 1 PID: 23937 Comm: syz-executor.5 Not tainted
6.0.0-rc4-syzkaller-00331-g4ed9c1e9-dirty #0

Hardware name: Google Google Compute Engine/Google Compute Engine,
BIOS Google 08/26/2022

Fixes: 1da177e4 ("Linux-2.6.12-rc2")
Reported-by: Nsyzbot <syzkaller@googlegroups.com>
Reported-by: NEric Dumazet <edumazet@google.com>
Signed-off-by: NKuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: NJakub Kicinski <kuba@kernel.org>
Conflicts:
	net/ipv4/tcp.c
        net/ipv6/ipv6_sockglue.c
Signed-off-by: NZiyang Xuan <william.xuanziyang@huawei.com>
Reviewed-by: NYue Haibing <yuehaibing@huawei.com>
Reviewed-by: NXiu Jianfeng <xiujianfeng@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

stable inclusion
from stable-v5.10.148
commit 58c0306d0bcd5f541714bea8765d23111c9af68a
category: bugfix
bugzilla: 187817, https://gitee.com/src-openeuler/kernel/issues/I5VMMW
CVE: CVE-2022-42722

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=58c0306d0bcd5f541714bea8765d23111c9af68a

--------------------------------

commit b2d03cab upstream.

If beacon protection is active but the beacon cannot be
decrypted or is otherwise malformed, we call the cfg80211
API to report this to userspace, but that uses a netdev
pointer, which isn't present for P2P-Device. Fix this to
call it only conditionally to ensure cfg80211 won't crash
in the case of P2P-Device.

This fixes CVE-2022-42722.
Reported-by: NSönke Huster <shuster@seemoo.tu-darmstadt.de>
Fixes: 9eaf183a ("mac80211: Report beacon protection failures to user space")
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>i
Signed-off-by: NDong Chenchen <dongchenchen2@huawei.com>
Reviewed-by: NYue Haibing <yuehaibing@huawei.com>
Reviewed-by: NWang Weiyang <wangweiyang2@huawei.com>
Reviewed-by: NLiu Jian <liujian56@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

mainline inclusion
from mainline-v5.11-rc1
commit b6650dab
category: bugfix
bugzilla: 187815, https://gitee.com/openeuler/kernel/issues/I5WLBD
CVE: NA

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=b6650dab404c701d7fe08a108b746542a934da84

--------------------------------

In case the file cannot be opened with O_NOATIME because of lack of
capabilities, then clear O_NOATIME instead of failing.

Remove WARN_ON(), since it would now trigger if O_NOATIME was cleared.
Noticed by Amir Goldstein.
Signed-off-by: NMiklos Szeredi <mszeredi@redhat.com>
Signed-off-by: NZhihao Cheng <chengzhihao1@huawei.com>
Reviewed-by: NZhang Yi <yi.zhang@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

stable inclusion
from stable-v5.10.144
commit 35371fd68807f41a4072c01c166de5425a2a47e5
category: bugfix
bugzilla: https://gitee.com/openeuler/kernel/issues/I5WL0J
CVE: NA

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=linux-5.10.y&id=35371fd68807f41a4072c01c166de5425a2a47e5

--------------------------------

commit 1f001e9d upstream.

Use the return thunk in ftrace trampolines, if needed.
Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: NBorislav Petkov <bp@suse.de>
Reviewed-by: NJosh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: NBorislav Petkov <bp@suse.de>
[cascardo: use memcpy(text_gen_insn) as there is no __text_gen_insn]
Signed-off-by: NThadeu Lima de Souza Cascardo <cascardo@canonical.com>
Signed-off-by: NOvidiu Panait <ovidiu.panait@windriver.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NLin Yujun <linyujun809@huawei.com>
Reviewed-by: NZhang Jianhua <chris.zjh@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

stable inclusion
from stable-v5.10.144
commit 4586df06a02049f4315c25b947c6dde2627c0d18
category: bugfix
bugzilla: https://gitee.com/openeuler/kernel/issues/I5WL0J
CVE: NA

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=linux-5.10.y&id=4586df06a02049f4315c25b947c6dde2627c0d18

--------------------------------

commit e52fc2cf upstream.

Return trampoline must not use indirect branch to return; while this
preserves the RSB, it is fundamentally incompatible with IBT. Instead
use a retpoline like ROP gadget that defeats IBT while not unbalancing
the RSB.

And since ftrace_stub is no longer a plain RET, don't use it to copy
from. Since RET is a trivial instruction, poke it directly.
Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: NJosh Poimboeuf <jpoimboe@redhat.com>
Link: https://lore.kernel.org/r/20220308154318.347296408@infradead.org
[cascardo: remove ENDBR]
Signed-off-by: NThadeu Lima de Souza Cascardo <cascardo@canonical.com>
[OP: adjusted context for 5.10-stable]
Signed-off-by: NOvidiu Panait <ovidiu.panait@windriver.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NLin Yujun <linyujun809@huawei.com>
Reviewed-by: NZhang Jianhua <chris.zjh@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

stable inclusion
from stable-v5.10.144
commit 33015556a943d6cbb18c555925a54b8c0e46f521
category: bugfix
bugzilla: https://gitee.com/openeuler/kernel/issues/I5WL0J
CVE: NA

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=linux-5.10.y&id=33015556a943d6cbb18c555925a54b8c0e46f521

--------------------------------

This reverts commit 00b136bb6254e0abf6aaafe62c4da5f6c4fea4cb.

This temporarily reverts the backport of upstream commit
1f001e9d. It was not correct to copy the
ftrace stub as it would contain a relative jump to the return thunk which
would not apply to the context where it was being copied to, leading to
ftrace support to be broken.
Signed-off-by: NThadeu Lima de Souza Cascardo <cascardo@canonical.com>
Signed-off-by: NOvidiu Panait <ovidiu.panait@windriver.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NLin Yujun <linyujun809@huawei.com>
Reviewed-by: NZhang Jianhua <chris.zjh@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

mainline inclusion
from mainline-v6.1-rc1
commit 3c52c6bb
category: bugfix
bugzilla: 187825, https://gitee.com/src-openeuler/kernel/issues/I5VZ0J
CVE: CVE-2022-3524

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=3c52c6bb831f6335c176a0fc7214e26f43adbd11

--------------------------------

syzbot reported a memory leak [0] related to IPV6_ADDRFORM.

The scenario is that while one thread is converting an IPv6 socket into
IPv4 with IPV6_ADDRFORM, another thread calls do_ipv6_setsockopt() and
allocates memory to inet6_sk(sk)->XXX after conversion.

Then, the converted sk with (tcp|udp)_prot never frees the IPv6 resources,
which inet6_destroy_sock() should have cleaned up.

setsockopt(IPV6_ADDRFORM)                 setsockopt(IPV6_DSTOPTS)
+-----------------------+                 +----------------------+
- do_ipv6_setsockopt(sk, ...)
  - sockopt_lock_sock(sk)                 - do_ipv6_setsockopt(sk, ...)
    - lock_sock(sk)                         ^._ called via tcpv6_prot
  - WRITE_ONCE(sk->sk_prot, &tcp_prot)          before WRITE_ONCE()
  - xchg(&np->opt, NULL)
  - txopt_put(opt)
  - sockopt_release_sock(sk)
    - release_sock(sk)                      - sockopt_lock_sock(sk)
                                              - lock_sock(sk)
                                            - ipv6_set_opt_hdr(sk, ...)
                                              - ipv6_update_options(sk, opt)
                                                - xchg(&inet6_sk(sk)->opt, opt)
                                                  ^._ opt is never freed.

                                            - sockopt_release_sock(sk)
                                              - release_sock(sk)

Since IPV6_DSTOPTS allocates options under lock_sock(), we can avoid this
memory leak by testing whether sk_family is changed by IPV6_ADDRFORM after
acquiring the lock.

This issue exists from the initial commit between IPV6_ADDRFORM and
IPV6_PKTOPTIONS.

[0]:
BUG: memory leak
unreferenced object 0xffff888009ab9f80 (size 96):
  comm "syz-executor583", pid 328, jiffies 4294916198 (age 13.034s)
  hex dump (first 32 bytes):
    01 00 00 00 48 00 00 00 08 00 00 00 00 00 00 00  ....H...........
    00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
  backtrace:
    [<000000002ee98ae1>] kmalloc include/linux/slab.h:605 [inline]
    [<000000002ee98ae1>] sock_kmalloc+0xb3/0x100 net/core/sock.c:2566
    [<0000000065d7b698>] ipv6_renew_options+0x21e/0x10b0 net/ipv6/exthdrs.c:1318
    [<00000000a8c756d7>] ipv6_set_opt_hdr net/ipv6/ipv6_sockglue.c:354 [inline]
    [<00000000a8c756d7>] do_ipv6_setsockopt.constprop.0+0x28b7/0x4350 net/ipv6/ipv6_sockglue.c:668
    [<000000002854d204>] ipv6_setsockopt+0xdf/0x190 net/ipv6/ipv6_sockglue.c:1021
    [<00000000e69fdcf8>] tcp_setsockopt+0x13b/0x2620 net/ipv4/tcp.c:3789
    [<0000000090da4b9b>] __sys_setsockopt+0x239/0x620 net/socket.c:2252
    [<00000000b10d192f>] __do_sys_setsockopt net/socket.c:2263 [inline]
    [<00000000b10d192f>] __se_sys_setsockopt net/socket.c:2260 [inline]
    [<00000000b10d192f>] __x64_sys_setsockopt+0xbe/0x160 net/socket.c:2260
    [<000000000a80d7aa>] do_syscall_x64 arch/x86/entry/common.c:50 [inline]
    [<000000000a80d7aa>] do_syscall_64+0x38/0x90 arch/x86/entry/common.c:80
    [<000000004562b5c6>] entry_SYSCALL_64_after_hwframe+0x63/0xcd

Fixes: 1da177e4 ("Linux-2.6.12-rc2")
Reported-by: Nsyzbot <syzkaller@googlegroups.com>
Signed-off-by: NKuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: NJakub Kicinski <kuba@kernel.org>

Conflicts:
	net/ipv6/ipv6_sockglue.c
Signed-off-by: NXu Jia <xujia39@huawei.com>
Reviewed-by: NYue Haibing <yuehaibing@huawei.com>
Reviewed-by: NWang Weiyang <wangweiyang2@huawei.com>
Reviewed-by: NLiu Jian <liujian56@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

mainline inclusion
from mainline-v6.1-rc1
commit ec7eede3
category: bugfix
bugzilla: 187823, https://gitee.com/src-openeuler/kernel/issues/I5VZ0N
CVE: CVE-2022-3521

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=ec7eede369fe5b0d085ac51fdbb95184f87bfc6c

--------------------------------

syzbot found that kcm_tx_work() could crash [1] in:

	/* Primarily for SOCK_SEQPACKET sockets */
	if (likely(sk->sk_socket) &&
	    test_bit(SOCK_NOSPACE, &sk->sk_socket->flags)) {
<<*>>	clear_bit(SOCK_NOSPACE, &sk->sk_socket->flags);
		sk->sk_write_space(sk);
	}

I think the reason is that another thread might concurrently
run in kcm_release() and call sock_orphan(sk) while sk is not
locked. kcm_tx_work() find sk->sk_socket being NULL.

[1]
BUG: KASAN: null-ptr-deref in instrument_atomic_write include/linux/instrumented.h:86 [inline]
BUG: KASAN: null-ptr-deref in clear_bit include/asm-generic/bitops/instrumented-atomic.h:41 [inline]
BUG: KASAN: null-ptr-deref in kcm_tx_work+0xff/0x160 net/kcm/kcmsock.c:742
Write of size 8 at addr 0000000000000008 by task kworker/u4:3/53

CPU: 0 PID: 53 Comm: kworker/u4:3 Not tainted 5.19.0-rc3-next-20220621-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Workqueue: kkcmd kcm_tx_work
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:88 [inline]
dump_stack_lvl+0xcd/0x134 lib/dump_stack.c:106
kasan_report+0xbe/0x1f0 mm/kasan/report.c:495
check_region_inline mm/kasan/generic.c:183 [inline]
kasan_check_range+0x13d/0x180 mm/kasan/generic.c:189
instrument_atomic_write include/linux/instrumented.h:86 [inline]
clear_bit include/asm-generic/bitops/instrumented-atomic.h:41 [inline]
kcm_tx_work+0xff/0x160 net/kcm/kcmsock.c:742
process_one_work+0x996/0x1610 kernel/workqueue.c:2289
worker_thread+0x665/0x1080 kernel/workqueue.c:2436
kthread+0x2e9/0x3a0 kernel/kthread.c:376
ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:302
</TASK>

Fixes: ab7ac4eb ("kcm: Kernel Connection Multiplexor module")
Reported-by: Nsyzbot <syzkaller@googlegroups.com>
Signed-off-by: NEric Dumazet <edumazet@google.com>
Cc: Tom Herbert <tom@herbertland.com>
Link: https://lore.kernel.org/r/20221012133412.519394-1-edumazet@google.comSigned-off-by: NJakub Kicinski <kuba@kernel.org>
Signed-off-by: NBaisong Zhong <zhongbaisong@huawei.com>
Reviewed-by: NLiu Jian <liujian56@huawei.com>
Reviewed-by: NXiu Jianfeng <xiujianfeng@huawei.com>
Reviewed-by: NYue Haibing <yuehaibing@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

hulk inclusion
category: bugfix
bugzilla: 187685, https://gitee.com/openeuler/kernel/issues/I5VVZX
CVE: NA

--------------------------------

UBIFS calculates available space by c->main_bytes - c->lst.total_used
(which means non-index lebs' free and dirty space is accounted into
total available), then index lebs and four lebs (one for gc_lnum, one
for deletions, two for journal heads) are deducted.
In following situation, ubifs may get -ENOSPC from make_reservation():
 LEB 84: DATAHD   free 122880 used 1920  dirty 2176  dark 6144
 LEB 110:DELETION free 126976 used 0     dirty 0     dark 6144 (empty)
 LEB 201:gc_lnum  free 126976 used 0     dirty 0     dark 6144
 LEB 272:GCHD     free 77824  used 47672 dirty 1480  dark 6144
 LEB 356:BASEHD   free 0      used 39776 dirty 87200 dark 6144
 OTHERS: index lebs, zero-available non-index lebs

UBIFS calculates the available bytes is 6888 (How to calculate it:
126976 * 5[remain main bytes] - 1920[used] - 47672[used] - 39776[used] -
126976 * 1[deletions] - 126976 * 1[gc_lnum] - 126976 * 2[journal heads]
- 6144 * 5[dark] = 6888) after doing budget, however UBIFS cannot use
BASEHD's dirty space(87200), because UBIFS cannot find next BASEHD to
reclaim current BASEHD. (c->bi.min_idx_lebs equals to c->lst.idx_lebs,
the empty leb won't be found by ubifs_find_free_space(), and dirty index
lebs won't be picked as gced lebs. All non-index lebs has dirty space
less then c->dead_wm, non-index lebs won't be picked as gced lebs
either. So new free lebs won't be produced.). See more details in Link.

To fix it, reserve one leb for each journal head while doing budget.

Link: https://bugzilla.kernel.org/show_bug.cgi?id=216562
Fixes: 1e51764a ("UBIFS: add new flash file system")
Signed-off-by: NZhihao Cheng <chengzhihao1@huawei.com>
Reviewed-by: NZhang Yi <yi.zhang@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

hulk inclusion
category: bugfix
bugzilla: 187685, https://gitee.com/openeuler/kernel/issues/I5VVZX
CVE: NA

--------------------------------

If target inode is a special file (eg. block/char device) with nlink
count greater than 1, the inode with ui->data will be re-written on
disk. However, UBIFS losts target inode's data_len while doing space
budget. Bad space budget may let make_reservation() return with -ENOSPC,
which could turn ubifs to read-only mode in do_writepage() process.

Fetch a reproducer in [Link].

Link: https://bugzilla.kernel.org/show_bug.cgi?id=216494
Fixes: 1e51764a ("UBIFS: add new flash file system")
Signed-off-by: NZhihao Cheng <chengzhihao1@huawei.com>
Reviewed-by: NZhang Yi <yi.zhang@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

hulk inclusion
category: bugfix
bugzilla: 187685, https://gitee.com/openeuler/kernel/issues/I5VVZX
CVE: NA

-------------------------------

Each dirty inode should reserve 'c->bi.inode_budget' bytes in space
budget calculation. Currently, space budget for dirty inode reports
more space than what UBIFS actually needs to write.

Fixes: 1e51764a ("UBIFS: add new flash file system")
Signed-off-by: NZhihao Cheng <chengzhihao1@huawei.com>
Reviewed-by: NZhang Yi <yi.zhang@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

hulk inclusion
category: bugfix
bugzilla: 187685, https://gitee.com/openeuler/kernel/issues/I5VVZX
CVE: NA

--------------------------------

There is no space budget for ubifs_xrename(). It may let
make_reservation() return with -ENOSPC, which could turn
ubifs to read-only mode in do_writepage() process.
Fix it by adding space budget for ubifs_xrename().

Fixes: 9ec64962 ("ubifs: Implement RENAME_EXCHANGE")
Signed-off-by: NZhihao Cheng <chengzhihao1@huawei.com>
Reviewed-by: NZhang Yi <yi.zhang@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

hulk inclusion
category: bugfix
bugzilla: 187685, https://gitee.com/openeuler/kernel/issues/I5VVZX
CVE: NA

--------------------------------

Fix bad space budget when symlink file is encrypted. Bad space budget
may let make_reservation() return with -ENOSPC, which could turn ubifs
to read-only mode in do_writepage() process.

Fetch a reproducer in [Link].

Link: https://bugzilla.kernel.org/show_bug.cgi?id=216490
Fixes: ca7f85be ("ubifs: Add support for encrypted symlinks")
Signed-off-by: NZhihao Cheng <chengzhihao1@huawei.com>
Reviewed-by: NZhang Yi <yi.zhang@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

stable inclusion
from stable-v5.10.127
commit 1cca46c20541d8521c855f7eace5e96f4f005923
category: bugfix
bugzilla: https://gitee.com/openeuler/kernel/issues/I5XDDK

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=1cca46c20541d8521c855f7eace5e96f4f005923

--------------------------------

commit e561e472 upstream.

The platform's RNG must be available before random_init() in order to be
useful for initial seeding, which in turn means that it needs to be
called from setup_arch(), rather than from an init call. Fortunately,
each platform already has a setup_arch function pointer, which means
it's easy to wire this up. This commit also removes some noisy log
messages that don't add much.

Fixes: a489043f ("powerpc/pseries: Implement arch_get_random_long() based on H_RANDOM")
Cc: stable@vger.kernel.org # v3.13+
Signed-off-by: NJason A. Donenfeld <Jason@zx2c4.com>
Reviewed-by: NChristophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220611151015.548325-4-Jason@zx2c4.comSigned-off-by: NJason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>
Reviewed-by: NWei Li <liwei391@huawei.com>

stable inclusion
from stable-v5.10.127
commit 95d73d510b8ae6652b48709bc0f9283a18f8b092
category: bugfix
bugzilla: https://gitee.com/openeuler/kernel/issues/I5XDDK

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=95d73d510b8ae6652b48709bc0f9283a18f8b092

--------------------------------

commit 53632ba8 upstream.

If CONFIG_TRIM_UNUSED_KSYMS is enabled and the kernel is built from
a pristine state, the vmlinux is linked twice.

Commit 3fdc7d3f ("kbuild: link vmlinux only once for
CONFIG_TRIM_UNUSED_KSYMS") explains why this happens, but it did not fix
the issue at all.

Now I realized I had applied a wrong patch.

In v1 patch [1], the autoksyms_recursive target correctly recurses to
"$(MAKE) -f $(srctree)/Makefile autoksyms_recursive".

In v2 patch [2], I accidentally dropped the diff line, and it recurses to
"$(MAKE) -f $(srctree)/Makefile vmlinux".

Restore the code I intended in v1.

[1]: https://lore.kernel.org/linux-kbuild/1521045861-22418-8-git-send-email-yamada.masahiro@socionext.com/
[2]: https://lore.kernel.org/linux-kbuild/1521166725-24157-8-git-send-email-yamada.masahiro@socionext.com/

Fixes: 3fdc7d3f ("kbuild: link vmlinux only once for CONFIG_TRIM_UNUSED_KSYMS")
Signed-off-by: NMasahiro Yamada <masahiroy@kernel.org>
Tested-by: NSami Tolvanen <samitolvanen@google.com>
Reviewed-by: NNick Desaulniers <ndesaulniers@google.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>
Reviewed-by: NWei Li <liwei391@huawei.com>

stable inclusion
from stable-v5.10.127
commit feb5ab798698a05d14e74804dd09ba352c714553
category: bugfix
bugzilla: https://gitee.com/openeuler/kernel/issues/I5XDDK

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=feb5ab798698a05d14e74804dd09ba352c714553

--------------------------------

commit 63b8ea5e upstream.

This comment wasn't updated when we moved from read() to read_iter(), so
this patch makes the trivial fix.

Fixes: 1b388e77 ("random: convert to using fops->read_iter()")
Signed-off-by: NJason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>
Reviewed-by: NWei Li <liwei391@huawei.com>

stable inclusion
from stable-v5.10.127
commit 959bbaf5b7a9cc5504b88e3a5b87a11937df6366
category: bugfix
bugzilla: https://gitee.com/openeuler/kernel/issues/I5XDDK

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=959bbaf5b7a9cc5504b88e3a5b87a11937df6366

--------------------------------

commit 28438794 upstream.

Since commit f02e8a65 ("module: Sort exported symbols"),
EXPORT_SYMBOL* is placed in the individual section ___ksymtab(_gpl)+<sym>
(3 leading underscores instead of 2).

Since then, modpost cannot detect the bad combination of EXPORT_SYMBOL
and __init/__exit.

Fix the .fromsec field.

Fixes: f02e8a65 ("module: Sort exported symbols")
Signed-off-by: NMasahiro Yamada <masahiroy@kernel.org>
Reviewed-by: NNick Desaulniers <ndesaulniers@google.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>
Reviewed-by: NWei Li <liwei391@huawei.com>

stable inclusion
from stable-v5.10.127
commit c980392af1473d6d5662f70d8089c8e6d85144a4
category: bugfix
bugzilla: https://gitee.com/openeuler/kernel/issues/I5XDDK

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=c980392af1473d6d5662f70d8089c8e6d85144a4

--------------------------------

commit 1ba904b6 upstream.

of_find_compatible_node() returns a node pointer with refcount
incremented, we should use of_node_put() on it when done.
Add missing of_node_put() to avoid refcount leak.

Fixes: 415f5914 ("ARM: cns3xxx: initial DT support")
Signed-off-by: NMiaoqian Lin <linmq006@gmail.com>
Acked-by: NKrzysztof Halasa <khalasa@piap.pl>
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>
Reviewed-by: NWei Li <liwei391@huawei.com>

stable inclusion
from stable-v5.10.127
commit 889aad2203e09eed2071ca8985c25e9d6aea5735
category: bugfix
bugzilla: https://gitee.com/openeuler/kernel/issues/I5XDDK

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=889aad2203e09eed2071ca8985c25e9d6aea5735

--------------------------------

commit 1332661e upstream.

of_parse_phandle() returns a node pointer with refcount
incremented, we should use of_node_put() on it when not need anymore.
This function doesn't call of_node_put() in some error paths.
To unify the structure, Add put_node label and goto it on errors.

Fixes: 6e7674c3 ("memory: Add DMC driver for Exynos5422")
Signed-off-by: NMiaoqian Lin <linmq006@gmail.com>
Reviewed-by: NLukasz Luba <lukasz.luba@arm.com>
Link: https://lore.kernel.org/r/20220602041721.64348-1-linmq006@gmail.comSigned-off-by: NKrzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>
Reviewed-by: NWei Li <liwei391@huawei.com>

stable inclusion
from stable-v5.10.127
commit 44a5b3a073e5aaa5720929dba95b2725eb32bb65
category: bugfix
bugzilla: https://gitee.com/openeuler/kernel/issues/I5XDDK

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=44a5b3a073e5aaa5720929dba95b2725eb32bb65

--------------------------------

commit 7c7ff68d upstream.

of_find_compatible_node() returns a node pointer with refcount
incremented, we should use of_node_put() on it when done.
Add missing of_node_put() to avoid refcount leak.

Fixes: 1d22924e ("ARM: Add platform support for LSI AXM55xx SoC")
Signed-off-by: NMiaoqian Lin <linmq006@gmail.com>
Link: https://lore.kernel.org/r/20220601090548.47616-1-linmq006@gmail.com'
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>
Reviewed-by: NWei Li <liwei391@huawei.com>

stable inclusion
from stable-v5.10.127
commit 30bbfeb480ae8b5ee43199d72417b232590440c2
category: bugfix
bugzilla: https://gitee.com/openeuler/kernel/issues/I5XDDK

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=30bbfeb480ae8b5ee43199d72417b232590440c2

--------------------------------

commit 37d838de upstream.

of_find_matching_node() returns a node pointer with refcount
incremented, we should use of_node_put() on it when not need anymore.
Add missing of_node_put() to avoid refcount leak.

In brcmstb_init_sram, it pass dn to of_address_to_resource(),
of_address_to_resource() will call of_find_device_by_node() to take
reference, so we should release the reference returned by
of_find_matching_node().

Fixes: 0b741b82 ("soc: bcm: brcmstb: Add support for S2/S3/S5 suspend states (ARM)")
Signed-off-by: NMiaoqian Lin <linmq006@gmail.com>
Reviewed-by: NAndy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: NFlorian Fainelli <f.fainelli@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>
Reviewed-by: NWei Li <liwei391@huawei.com>

stable inclusion
from stable-v5.10.127
commit 68f28d52e6cbab8dcfa249cac4356d1d0573e868
category: bugfix
bugzilla: https://gitee.com/openeuler/kernel/issues/I5XDDK

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=68f28d52e6cbab8dcfa249cac4356d1d0573e868

--------------------------------

commit c4c79525 upstream.

of_find_matching_node() returns a node pointer with refcount
incremented, we should use of_node_put() on it when not need anymore.
Add missing of_node_put() to avoid refcount leak.
of_node_put() checks null pointer.

Fixes: fce9e5bb ("ARM: EXYNOS: Add support for mapping PMU base address via DT")
Signed-off-by: NMiaoqian Lin <linmq006@gmail.com>
Link: https://lore.kernel.org/r/20220523145513.12341-1-linmq006@gmail.comSigned-off-by: NKrzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>
Reviewed-by: NWei Li <liwei391@huawei.com>

stable inclusion
from stable-v5.10.127
commit 59fdf108144c046e39e8ecb0dade7426fde772a6
category: bugfix
bugzilla: https://gitee.com/openeuler/kernel/issues/I5XDDK

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=59fdf108144c046e39e8ecb0dade7426fde772a6

--------------------------------

commit 93a8ba2a upstream.

Contrary to what was believed at the time, the ramp delay of 150us is not
plenty for the PU LDO with the default step time of 512 pulses of the 24MHz
clock. Measurements have shown that after enabling the LDO the voltage on
VDDPU_CAP jumps to ~750mV in the first step and after that the regulator
executes the normal ramp up as defined by the step size control.

This means it takes the regulator between 360us and 370us to ramp up to
the nominal 1.15V voltage for this power domain. With the old setting of
the ramp delay the power up of the PU GPC domain would happen in the middle
of the regulator ramp with the voltage being at around 900mV. Apparently
this was enough for most units to properly power up the peripherals in the
domain and execute the reset. Some units however, fail to power up properly,
especially when the chip is at a low temperature. In that case any access
to the GPU registers would yield an incorrect result with no way to recover
from this situation.

Change the ramp delay to 380us to cover the measured ramp up time with a
bit of additional slack.

Fixes: 40130d32 ("ARM: dts: imx6qdl: Allow disabling the PU regulator, add a enable ramp delay")
Signed-off-by: NLucas Stach <l.stach@pengutronix.de>
Signed-off-by: NShawn Guo <shawnguo@kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>
Reviewed-by: NWei Li <liwei391@huawei.com>

stable inclusion
from stable-v5.10.127
commit fb70bd86751ad2dd7d8db15a60d2bf8ce9803d72
category: bugfix
bugzilla: https://gitee.com/openeuler/kernel/issues/I5XDDK

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=fb70bd86751ad2dd7d8db15a60d2bf8ce9803d72

--------------------------------

commit 552ca279 upstream.

Move the power domain to its actual user. This keeps the power domain
enabled even when the USB host is runtime suspended. This is necessary
to detect any downstream events, like device attach.

Fixes: 02f8eb40 ("ARM: dts: imx7s: Add power domain for imx7d HSIC")
Suggested-by: NJun Li <jun.li@nxp.com>
Signed-off-by: NAlexander Stein <alexander.stein@ew.tq-group.com>
Reviewed-by: NFabio Estevam <festevam@gmail.com>
Signed-off-by: NShawn Guo <shawnguo@kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>
Reviewed-by: NWei Li <liwei391@huawei.com>

stable inclusion
from stable-v5.10.127
commit f78acc4288edf747e8376d50c92cb427e3193ec6
category: bugfix
bugzilla: https://gitee.com/openeuler/kernel/issues/I5XDDK

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=f78acc4288edf747e8376d50c92cb427e3193ec6

--------------------------------

commit f3eac426 upstream.

The platform's RNG must be available before random_init() in order to be
useful for initial seeding, which in turn means that it needs to be
called from setup_arch(), rather than from an init call.

Complicating things, however, is that POWER8 systems need some per-cpu
state and kmalloc, which isn't available at this stage. So we split
things up into an early phase and a later opportunistic phase. This
commit also removes some noisy log messages that don't add much.

Fixes: a4da0d50 ("powerpc: Implement arch_get_random_long/int() for powernv")
Cc: stable@vger.kernel.org # v3.13+
Signed-off-by: NJason A. Donenfeld <Jason@zx2c4.com>
Reviewed-by: NChristophe Leroy <christophe.leroy@csgroup.eu>
[mpe: Add of_node_put(), use pnv naming, minor change log editing]
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220621140849.127227-1-Jason@zx2c4.comSigned-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>
Reviewed-by: NWei Li <liwei391@huawei.com>

stable inclusion
from stable-v5.10.127
commit 7db1ba660b07bc89fd608f30bff583d35ba34353
category: bugfix
bugzilla: https://gitee.com/openeuler/kernel/issues/I5XDDK

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=7db1ba660b07bc89fd608f30bff583d35ba34353

--------------------------------

commit 7bc08056 upstream.

Add a special case to block_rtas_call() to allow the ibm,platform-dump RTAS
call through the RTAS filter if the buffer address is 0.

According to PAPR, ibm,platform-dump is called with a null buffer address
to notify the platform firmware that processing of a particular dump is
finished.

Without this, on a pseries machine with CONFIG_PPC_RTAS_FILTER enabled, an
application such as rtas_errd that is attempting to retrieve a dump will
encounter an error at the end of the retrieval process.

Fixes: bd59380c ("powerpc/rtas: Restrict RTAS requests from userspace")
Cc: stable@vger.kernel.org
Reported-by: NSathvika Vasireddy <sathvika@linux.ibm.com>
Signed-off-by: NAndrew Donnellan <ajd@linux.ibm.com>
Reviewed-by: NTyrel Datwyler <tyreld@linux.ibm.com>
Reviewed-by: NNathan Lynch <nathanl@linux.ibm.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220614134952.156010-1-ajd@linux.ibm.comSigned-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>
Reviewed-by: NWei Li <liwei391@huawei.com>

stable inclusion
from stable-v5.10.127
commit 1f5a9205a3be6406af488cd6511c481a6d6e9b71
category: bugfix
bugzilla: https://gitee.com/openeuler/kernel/issues/I5XDDK

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=1f5a9205a3be6406af488cd6511c481a6d6e9b71

--------------------------------

commit ec6d0dde upstream.

On execve[at], we are zero'ing out most of the thread register state
including gpr[0], which contains the syscall number. Due to this, we
fail to trigger the syscall exit tracepoint properly. Fix this by
retaining gpr[0] in the thread register state.

Before this patch:
  # tail /sys/kernel/debug/tracing/trace
	       cat-123     [000] .....    61.449351: sys_execve(filename:
  7fffa6b23448, argv: 7fffa6b233e0, envp: 7fffa6b233f8)
	       cat-124     [000] .....    62.428481: sys_execve(filename:
  7fffa6b23448, argv: 7fffa6b233e0, envp: 7fffa6b233f8)
	      echo-125     [000] .....    65.813702: sys_execve(filename:
  7fffa6b23378, argv: 7fffa6b233a0, envp: 7fffa6b233b0)
	      echo-125     [000] .....    65.822214: sys_execveat(fd: 0,
  filename: 1009ac48, argv: 7ffff65d0c98, envp: 7ffff65d0ca8, flags: 0)

After this patch:
  # tail /sys/kernel/debug/tracing/trace
	       cat-127     [000] .....   100.416262: sys_execve(filename:
  7fffa41b3448, argv: 7fffa41b33e0, envp: 7fffa41b33f8)
	       cat-127     [000] .....   100.418203: sys_execve -> 0x0
	      echo-128     [000] .....   103.873968: sys_execve(filename:
  7fffa41b3378, argv: 7fffa41b33a0, envp: 7fffa41b33b0)
	      echo-128     [000] .....   103.875102: sys_execve -> 0x0
	      echo-128     [000] .....   103.882097: sys_execveat(fd: 0,
  filename: 1009ac48, argv: 7fffd10d2148, envp: 7fffd10d2158, flags: 0)
	      echo-128     [000] .....   103.883225: sys_execveat -> 0x0

Cc: stable@vger.kernel.org
Signed-off-by: NNaveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Tested-by: NSumit Dubey2 <Sumit.Dubey2@ibm.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220609103328.41306-1-naveen.n.rao@linux.vnet.ibm.comSigned-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>
Reviewed-by: NWei Li <liwei391@huawei.com>

stable inclusion
from stable-v5.10.127
commit ca144919afd4cd5c297ccca05a027f6392edb066
category: bugfix
bugzilla: https://gitee.com/openeuler/kernel/issues/I5XDDK

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=ca144919afd4cd5c297ccca05a027f6392edb066

--------------------------------

commit 0a1355db upstream.

Fix a boot crash on a c8000 machine as reported by Dave.  Basically it changes
patch_map() to return an alias mapping to the to-be-patched code in order to
prevent writing to write-protected memory.
Signed-off-by: NHelge Deller <deller@gmx.de>
Suggested-by: NJohn David Anglin <dave.anglin@bell.net>
Cc: stable@vger.kernel.org   # v5.2+
Link: https://lore.kernel.org/all/e8ec39e8-25f8-e6b4-b7ed-4cb23efc756e@bell.net/Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>
Reviewed-by: NWei Li <liwei391@huawei.com>

stable inclusion
from stable-v5.10.127
commit a1c902349ad5656903589d672ad163a23a2a99b4
category: bugfix
bugzilla: https://gitee.com/openeuler/kernel/issues/I5XDDK

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=a1c902349ad5656903589d672ad163a23a2a99b4

--------------------------------

commit 1d0811b0 upstream.

Fix this build error noticed by the kernel test robot:

drivers/video/console/sticore.c:1132:5: error: redefinition of 'fb_is_primary_device'
 arch/parisc/include/asm/fb.h:18:19: note: previous definition of 'fb_is_primary_device'
Signed-off-by: NHelge Deller <deller@gmx.de>
Reported-by: Nkernel test robot <lkp@intel.com>
Cc: stable@vger.kernel.org   # v5.10+
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>
Reviewed-by: NWei Li <liwei391@huawei.com>

stable inclusion
from stable-v5.10.127
commit af0ff2da01521144bc11194f4c26485d7c9cee73
category: bugfix
bugzilla: https://gitee.com/openeuler/kernel/issues/I5XDDK

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=af0ff2da01521144bc11194f4c26485d7c9cee73

--------------------------------

commit a0117dc9 upstream.

In calibrate_ccount(), of_find_compatible_node() will return a node
pointer with refcount incremented. We should use of_node_put() when
it is not used anymore.

Cc: stable@vger.kernel.org
Signed-off-by: NLiang He <windhl@126.com>
Message-Id: <20220617124432.4049006-1-windhl@126.com>
Signed-off-by: NMax Filippov <jcmvbkbc@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>
Reviewed-by: NWei Li <liwei391@huawei.com>

stable inclusion
from stable-v5.10.127
commit 6c0839cf1b9e1b3c88da6af76794583cbfae8da3
category: bugfix
bugzilla: https://gitee.com/openeuler/kernel/issues/I5XDDK

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=6c0839cf1b9e1b3c88da6af76794583cbfae8da3

--------------------------------

commit 173940b3 upstream.

In machine_setup(), of_find_compatible_node() will return a node
pointer with refcount incremented. We should use of_node_put() when
it is not used anymore.

Cc: stable@vger.kernel.org
Signed-off-by: NLiang He <windhl@126.com>
Message-Id: <20220617115323.4046905-1-windhl@126.com>
Signed-off-by: NMax Filippov <jcmvbkbc@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>
Reviewed-by: NWei Li <liwei391@huawei.com>

stable inclusion
from stable-v5.10.127
commit 501652a2ad5450b4908e1f204ce75b2414c305b7
category: bugfix
bugzilla: https://gitee.com/openeuler/kernel/issues/I5XDDK

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=501652a2ad5450b4908e1f204ce75b2414c305b7

--------------------------------

commit ada7b0c0 upstream.

of_parse_phandle() returns a node pointer with refcount
incremented, we should use of_node_put() on it when not need anymore.
Add missing of_node_put() to avoid refcount leak.

Fixes: ef040706 ("iio: adc: adi-axi-adc: add support for AXI ADC IP core")
Signed-off-by: NMiaoqian Lin <linmq006@gmail.com>
Link: https://lore.kernel.org/r/20220524074517.45268-1-linmq006@gmail.com
Cc: <Stable@vger.kernel.org>
Signed-off-by: NJonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>
Reviewed-by: NWei Li <liwei391@huawei.com>

stable inclusion
from stable-v5.10.127
commit d40514d4403a89e00c17815140b3ec74d8ddd9b6
category: bugfix
bugzilla: https://gitee.com/openeuler/kernel/issues/I5XDDK

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=d40514d4403a89e00c17815140b3ec74d8ddd9b6

--------------------------------

commit 04805839 upstream.

Since commit 9bcf15f7 ("iio: adc: axp288: Fix TS-pin handling") we
preserve the bias current set by the firmware at boot. This fixes issues
we were seeing on various models.

Some models like the Nuvision Solo 10 Draw tablet actually need the
old hardcoded 80ųA bias current for battery temperature monitoring
to work properly.

Add a quirk entry for the Nuvision Solo 10 Draw to the DMI quirk table
to restore setting the bias current to 80ųA on this model.

Fixes: 9bcf15f7 ("iio: adc: axp288: Fix TS-pin handling")
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=215882Signed-off-by: NHans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20220506095040.21008-1-hdegoede@redhat.com
Cc: <Stable@vger.kernel.org>
Signed-off-by: NJonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>
Reviewed-by: NWei Li <liwei391@huawei.com>