- 13 6月, 2008 24 次提交
-
-
由 Philippe De Muyter 提交于
The coldfire timer must be initialised to n - 1 if we want it to count n cycles between each tick interrupt. This was already fixed, but has been lost with the conversion to GENERIC_TIMER. Signed-off-by: NPhilippe De Muyter <phdm@macqel.be> Acked-by: NGreg Ungerer <gerg@snapgear.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Masami Hiramatsu 提交于
Fix error checking routine to catch an error which occurs in first __register_*probe(). Signed-off-by: NMasami Hiramatsu <mhiramat@redhat.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Jim Keniston <jkenisto@us.ibm.com> Cc: David Miller <davem@davemloft.net> Cc: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Mike Miller 提交于
Add support for the next generation of HP Smart Array SAS/SATA controllers. Shipping date is late Fall 2008. Bump the driver version to 3.6.20 to reflect the new hardware support from patch 1 of this set. Signed-off-by: NMike Miller <mike.miller@hp.com> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: <stable@kernel.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Andrew G. Morgan 提交于
The dummy module is used by folk that run security conscious code(!?). A feature of such code (for example, dhclient) is that it tries to operate with minimum privilege (dropping unneeded capabilities). While the dummy module doesn't restrict code execution based on capability state, the user code expects the kernel to appear to support it. This patch adds back faked support for the PR_SET_KEEPCAPS etc., calls - making the kernel behave as before 2.6.26. For details see: http://bugzilla.kernel.org/show_bug.cgi?id=10748Signed-off-by: NAndrew G. Morgan <morgan@kernel.org> Acked-by: NSerge Hallyn <serue@us.ibm.com> Cc: James Morris <jmorris@namei.org> Cc: Stephen Smalley <sds@tycho.nsa.gov> Cc: Chris Wright <chrisw@sous-sol.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Ben Nizette 提交于
Move the forward-declaration of struct mm_struct a little way up proc_fs.h. This fixes a bunch of "'struct mm_struct' declared inside parameter list" warnings with CONFIG_PROC_FS=n Signed-off-by: NBen Nizette <bn@niasdigital.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Paul Jackson 提交于
Add URL for another CPUSETS web page to the MAINTAINERS file. This URL provides links to major LGPL user level C libraries supporting cpuset usage and user level cpu and node masks. Signed-off-by: NPaul Jackson <pj@sgi.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Krzysztof Helt 提交于
Release ports which are requested during detection which are not freed if there is no hga card. Otherwise there is a crash during cat /proc/ioports command. Signed-off-by: NKrzysztof Helt <krzysztof.h1@wp.pl> Cc: <stable@kernel.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Aneesh Kumar K.V 提交于
Add ext2_find_{first,next}_bit(), which are needed for ext4. They're derived out of the ext2_find_next_zero_bit found in the same file. Compile tested with crosstools [Reworked to preserve all symmetry with ext2_find_{first,next}_zero_bit()] This fixes http://bugzilla.kernel.org/show_bug.cgi?id=10393 [akpm@linux-foundation.org: coding-style fixes] Signed-off-by: NGeert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 OGAWA Hirofumi 提交于
New chmod() allows only acceptable permission, and if not acceptable, it returns -EPERM. Old one allows even if it can't store permission to on disk inode. But it seems too strict for users. E.g. https://bugzilla.redhat.com/show_bug.cgi?id=449080: With new one, rsync couldn't create the temporary file. So, this patch allows like old one, but now it doesn't change the permission if it can't store, and it returns 0. Also, this patch fixes missing check. Signed-off-by: NOGAWA Hirofumi <hirofumi@mail.parknet.co.jp> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
"Smarter retry of costly-order allocations" patch series change behaver of do_try_to_free_pages(). But unfortunately ret variable type was unchanged. Thus an overflow is possible. Signed-off-by: NKOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Acked-by: NNishanth Aravamudan <nacc@us.ibm.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Amit Kucheria 提交于
Addresses https://bugs.edge.launchpad.net/ubuntu/+source/linux-source-2.6.22/+bug/178634Signed-off-by: NAmit Kucheria <amit.kucheria@ubuntu.com> Signed-off-by: Nmaximilian attems <max@stro.at> Acked-by: NDave Airlie <airlied@linux.ie> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Linus Torvalds 提交于
.. and a new name, courtesy of Alan.
-
由 Linus Torvalds 提交于
Merge branch 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: x86: fix pointer type warning in arch/x86/mm/init_64.c:early_memtest x86, lockdep: fix "WARNING: at kernel/lockdep.c:2658 check_flags+0x4c/0x128()" x86: fix an incompatible pointer type warning on 64-bit compilations x86: fix lockdep warning during suspend-to-ram x86: fix unused variable 'loops' warning in arch/x86/boot/a20.c Revert "x86: fix ioapic bug again" x86: fix asm warning in head_32.S x86: fix endless page faults in mount_block_root for Linux 2.6 geode: fix modular build
-
由 Linus Torvalds 提交于
Merge branch 'sched-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'sched-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: sched: 64-bit: fix arithmetics overflow sched: fair group: fix overflow(was: fix divide by zero) sched: fix TASK_WAKEKILL vs SIGKILL race
-
由 Kevin Winchester 提交于
Changed the call to find_e820_area_size to pass u64 instead of unsigned long. Signed-off-by: NKevin Winchester <kjwinchester@gmail.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Vegard Nossum 提交于
Alessandro Suardi reported: > Recently upgraded my FC6 desktop to Fedora 9; with the > latest nautilus RPM updates my VNC session went nuts > with nautilus pegging the CPU for everything that breathed. > > I now reverted to an earlier nautilus package, but during > the peak CPU period my kernel spat this: > > [314185.623294] ------------[ cut here ]------------ > [314185.623414] WARNING: at kernel/lockdep.c:2658 check_flags+0x4c/0x128() > [314185.623514] Modules linked in: iptable_filter ip_tables x_tables > sunrpc ipv6 fuse snd_via82xx snd_ac97_codec ac97_bus snd_mpu401_uart > snd_rawmidi via686a hwmon parport_pc sg parport uhci_hcd ehci_hcd > [314185.623924] Pid: 12314, comm: nautilus Not tainted 2.6.26-rc5-git2 #4 > [314185.624021] [<c0115b95>] warn_on_slowpath+0x41/0x7b > [314185.624021] [<c010de70>] ? do_page_fault+0x2c1/0x5fd > [314185.624021] [<c0128396>] ? up_read+0x16/0x28 > [314185.624021] [<c010de70>] ? do_page_fault+0x2c1/0x5fd > [314185.624021] [<c012fa33>] ? __lock_acquire+0xbb4/0xbc3 > [314185.624021] [<c012d0a0>] check_flags+0x4c/0x128 > [314185.624021] [<c012fa73>] lock_acquire+0x31/0x7d > [314185.624021] [<c0128cf6>] __atomic_notifier_call_chain+0x30/0x80 > [314185.624021] [<c0128cc6>] ? __atomic_notifier_call_chain+0x0/0x80 > [314185.624021] [<c0128d52>] atomic_notifier_call_chain+0xc/0xe > [314185.624021] [<c0128d81>] notify_die+0x2d/0x2f > [314185.624021] [<c01043b0>] do_int3+0x1f/0x4d > [314185.624021] [<c02f2d3b>] int3+0x27/0x2c > [314185.624021] ======================= > [314185.624021] ---[ end trace 1923f65a2d7bb246 ]--- > [314185.624021] possible reason: unannotated irqs-off. > [314185.624021] irq event stamp: 488879 > [314185.624021] hardirqs last enabled at (488879): [<c0102d67>] > restore_nocheck+0x12/0x15 > [314185.624021] hardirqs last disabled at (488878): [<c0102dca>] > work_resched+0x19/0x30 > [314185.624021] softirqs last enabled at (488876): [<c011a1ba>] > __do_softirq+0xa6/0xac > [314185.624021] softirqs last disabled at (488865): [<c010476e>] > do_softirq+0x57/0xa6 > > I didn't seem to find it with some googling, so here it is. > > I was incidentally ltracing that process to try and find out > what was gulping down that much CPU (sorry, no idea > whether ltrace and the WARNING happened at the same > time or which came first) and: Yeah, this is extremely likely to be the source of the warning. The warning should be harmless, however. > Box is my trusty noname K7-800, 512MB RAM; if there's > anything else useful I might be able to provide, just ask. It would be interesting to see where the int3 comes from. Too bad, lockdep doesn't provide the register dump. The stacktrace also doesn't go further than the int3(), I wonder if this int3 came from userspace? The ltrace readme says "software breakpoints, like gdb", so I guess this is the case. Yep, seems like it. This looks relevant: | commit fb1dac90 | Author: Peter Zijlstra <a.p.zijlstra@chello.nl> | Date: Wed Jan 16 09:51:59 2008 +0100 | | lockdep: more hardirq annotations for notify_die() I'm attaching a similarly-looking patch for this case (DO_VM86_ERROR), though I suspect it might be missing for the other cases (DO_ERROR/DO_ERROR_INFO) as well. Reported-by: NAlessandro Suardi <alessandro.suardi@gmail.com> Signed-off-by: NVegard Nossum <vegard.nossum@gmail.com> Acked-by: NPeter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 David Howells 提交于
Fix an incompatible pointer type warning on x86_64 compilations. early_memtest() is passing a u64* to find_e820_area_size() which is expecting an unsigned long. Change t_start and t_size to unsigned long as those are also 64-bit types on x88_64. Signed-off-by: NDavid Howells <dhowells@redhat.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Peter Zijlstra 提交于
Andrew Morton wrote: > I've been seeing the below for a long time during suspend-to-ram on the Vaio. > > > PM: Syncing filesystems ... done. > PM: Preparing system for mem sleep > Freezing user space processes ... <4>------------[ cut here ]------------ > WARNING: at kernel/lockdep.c:2658 check_flags+0x4c/0x127() > Modules linked in: i915 drm ipw2200 sonypi ipv6 autofs4 hidp l2cap bluetooth sunrpc nf_conntrack_netbios_ns ipt_REJECT nf_conntrack_ipv4 xt_state nf_conntrack xt_tcpudp iptable_filter ip_tables x_tables acpi_cpufreq nvram ohci1394 ieee1394 ehci_hcd uhci_hcd sg joydev snd_hda_intel snd_seq_dummy sr_mod snd_seq_oss cdrom snd_seq_midi_event snd_seq snd_seq_device snd_pcm_oss snd_mixer_oss ieee80211 pcspkr ieee80211_crypt snd_pcm i2c_i801 snd_timer i2c_core ide_pci_generic piix snd soundcore snd_page_alloc button ext3 jbd ide_disk ide_core [last unloaded: ipw2200] > Pid: 3250, comm: zsh Not tainted 2.6.26-rc5 #1 > [<c011c5f5>] warn_on_slowpath+0x41/0x6d > [<c01080e6>] ? native_sched_clock+0x82/0x96 > [<c013789c>] ? mark_held_locks+0x41/0x5c > [<c0315688>] ? _spin_unlock_irqrestore+0x36/0x58 > [<c0137a29>] ? trace_hardirqs_on+0xe6/0x10d > [<c0138637>] ? __lock_acquire+0xae3/0xb2b > [<c0313413>] ? schedule+0x39b/0x3b4 > [<c0135596>] check_flags+0x4c/0x127 > [<c01386b9>] lock_acquire+0x3a/0x86 > [<c0315075>] _spin_lock+0x26/0x53 > [<c0140660>] ? refrigerator+0x13/0xc3 > [<c0140660>] refrigerator+0x13/0xc3 > [<c012684a>] get_signal_to_deliver+0x3c/0x31e > [<c0102fe7>] do_notify_resume+0x91/0x6ee > [<c01359fd>] ? lock_release_holdtime+0x50/0x56 > [<c0315688>] ? _spin_unlock_irqrestore+0x36/0x58 > [<c0235d24>] ? read_chan+0x0/0x58c > [<c0137a29>] ? trace_hardirqs_on+0xe6/0x10d > [<c0315694>] ? _spin_unlock_irqrestore+0x42/0x58 > [<c0230afa>] ? tty_ldisc_deref+0x5c/0x63 > [<c0233104>] ? tty_read+0x66/0x98 > [<c014b3f0>] ? audit_syscall_exit+0x2aa/0x2c5 > [<c0109430>] ? do_syscall_trace+0x6b/0x16f > [<c0103a9c>] work_notifysig+0x13/0x1b > ======================= > ---[ end trace 25b49fe59a25afa5 ]--- > possible reason: unannotated irqs-off. > irq event stamp: 58919 > hardirqs last enabled at (58919): [<c0103afd>] syscall_exit_work+0x11/0x26 Joy - I so love entry.S Best I can make of it: syscall_exit_work resume_userspace DISABLE_INTERRUPTS (no TRACE_IRQS_OFF) work_pending work_notifysig do_notify_resume() do_signal() get_signal_to_deliver() try_to_freeze() refrigerator() task_lock() -> check_flags() -> BANG The normal path is: syscall_exit_work resume_userspace DISABLE_INTERRUPTS restore_all TRACE_IRQS_IRET iret No idea why that would not warn.. Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Manish Katiyar 提交于
Following patch fixes the below warning message : arch/x86/boot/a20.c:118: warning: unused variable 'loops' Signed-off-by : Manish Katiyar <mkatiyar@gmail.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Ingo Molnar 提交于
This reverts commit 6e908947. Németh Márton reported: | there is a problem in 2.6.26-rc3 which was not there in case of | 2.6.25: the CPU wakes up ~90,000 times per sec instead of ~60 per sec. | | I also "git bisected" the problem, the result is: | | 6e908947 is first bad commit | commit 6e908947 | Author: Ingo Molnar <mingo@elte.hu> | Date: Fri Mar 21 14:32:36 2008 +0100 | | x86: fix ioapic bug again the original problem is fixed by Maciej W. Rozycki in the tip/x86/apic branch (confirmed by Márton), but those changes are too intrusive for v2.6.26 so we'll go for the less intrusive (repeated) revert now. Reported-and-bisected-by: NNémeth Márton <nm127@freemail.hu> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Joe Korty 提交于
On Mon, May 19, 2008 at 04:10:02PM -0700, Linus Torvalds wrote: > It also causes these warnings on 32-bit PAE: > > AS arch/x86/kernel/head_32.o > arch/x86/kernel/head_32.S: Assembler messages: > arch/x86/kernel/head_32.S:225: Warning: left operand is a bignum; integer 0 assumed > arch/x86/kernel/head_32.S:609: Warning: left operand is a bignum; integer 0 assumed > > and I do not see why (the end result seems to be identical). Fix head_32.S gcc bignum warnings when CONFIG_PAE=y. arch/x86/kernel/head_32.S: Assembler messages: arch/x86/kernel/head_32.S:225: Warning: left operand is a bignum; integer 0 assumed arch/x86/kernel/head_32.S:609: Warning: left operand is a bignum; integer 0 assumed The assembler was stumbling over the 64-bit constant 0x100000000 in the KPMDS #define. Testing: a cmp(1) on head_32.o before and after shows the binary is unchanged. Signed-off-by: Joe Korty <joe.korty@ccur.com Cc: Hugh Dickins <hugh@veritas.com> Cc: Theodore Tso <tytso@mit.edu> Cc: Gabriel C <nix.or.die@googlemail.com> Cc: Keith Packard <keithp@keithp.com> Cc: "Pallipadi Venkatesh" <venkatesh.pallipadi@intel.com> Cc: Eric Anholt <eric@anholt.net> Cc: "Siddha Suresh B" <suresh.b.siddha@intel.com> Cc: bugme-daemon@bugzilla.kernel.org Cc: airlied@linux.ie Cc: "Barnes Jesse" <jesse.barnes@intel.com> Cc: Jeremy Fitzhardinge <jeremy@goop.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: "Rafael J. Wysocki" <rjw@sisk.pl> Cc: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: NThomas Gleixner <tglx@linutronix.de> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Henry Nestler 提交于
Page faults in kernel address space between PAGE_OFFSET up to VMALLOC_START should not try to map as vmalloc. Fix rarely endless page faults inside mount_block_root for root filesystem at boot time. All 32bit kernels up to 2.6.25 can fail into this hole. I can not present this under native linux kernel. I see, that the 64bit has fixed the problem. I copied the same lines into 32bit part. Recorded debugs are from coLinux kernel 2.6.22.18 (virtualisation): http://www.henrynestler.com/colinux/testing/pfn-check-0.7.3/20080410-antinx/bug16-recursive-page-fault-endless.txt The physicaly memory was trimmed down to 192MB to better catch the bug. More memory gets the bug more rarely. Details, how every x86 32bit system can fail: Start from "mount_block_root", http://lxr.linux.no/linux/init/do_mounts.c#L297 There the variable "fs_names" got one memory page with 4096 bytes. Variable "p" walks through the existing file system types. The first string is no problem. But, with the second loop in mount_block_root the offset of "p" is not at beginning of page, the offset is for example +9, if "reiserfs" is the first in list. Than calls do_mount_root, and lands in sys_mount. Remember: Variable "type_page" contains now "fs_type+9" and not contains a full page. The sys_mount copies 4096 bytes with function "exact_copy_from_user()": http://lxr.linux.no/linux/fs/namespace.c#L1540 Mostly exist pages after the buffer "fs_names+4096+9" and the page fault handler was not called. No problem. In the case, if the page after "fs_names+4096" is not mapped, the page fault handler was called from http://lxr.linux.no/linux/fs/namespace.c#L1320 The do_page_fault gots an address 0xc03b4000. It's kernel address, address >= TASK_SIZE, but not from vmalloc! It's from "__getname()" alias "kmem_cache_alloc". The "error_code" is 0. "vmalloc_fault" will be call: http://lxr.linux.no/linux/arch/i386/mm/fault.c#L332 "vmalloc_fault" tryed to find the physical page for a non existing virtual memory area. The macro "pte_present" in vmalloc_fault() got a next page fault for 0xc0000ed0 at: http://lxr.linux.no/linux/arch/i386/mm/fault.c#L282 No PTE exist for such virtual address. The page fault handler was trying to sync the physical page for the PTE lockup. This called vmalloc_fault() again for address 0xc000000, and that also was not existing. The endless began... In normal case the cpu would still loop with disabled interrrupts. Under coLinux this was catched by a stack overflow inside printk debugs. Signed-off-by: NHenry Nestler <henry.nestler@gmail.com> Signed-off-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
-
由 Ingo Molnar 提交于
-tip testing found this build bug: MODPOST 331 modules ERROR: "geode_mfgpt_toggle_event" [drivers/watchdog/geodewdt.ko] undefined! ERROR: "geode_mfgpt_alloc_timer" [drivers/watchdog/geodewdt.ko] undefined! make[1]: *** [__modpost] Error 1 make: *** [modules] Error 2 with this config: http://redhat.com/~mingo/misc/config-Wed_Jun__4_18_01_59_CEST_2008.bad export those symbols. Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Carl Henrik Lunde 提交于
As we may run relay_reserve from interrupt context we must always disable IRQs. This is because a call to relay_reserve may expose previously written data to use space. Updated new message code and an old but related comment. Signed-off-by: NCarl Henrik Lunde <chlunde@ping.uio.no> Signed-off-by: NJens Axboe <jens.axboe@oracle.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 12 6月, 2008 16 次提交
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/sam/kbuild-fixes由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/sam/kbuild-fixes: kbuild: ignore powerpc specific symbols in modpost
-
由 Paul Mundt 提交于
This implements a few changes on top of the recent kobjsize() refactoring introduced by commit 6cfd53fc. As Christoph points out: virt_to_head_page cannot return NULL. virt_to_page also does not return NULL. pfn_valid() needs to be used to figure out if a page is valid. Otherwise the page struct reference that was returned may have PageReserved() set to indicate that it is not a valid page. As discussed further in the thread, virt_addr_valid() is the preferable way to validate the object pointer in this case. In addition to fixing up the reserved page case, it also has the benefit of encapsulating the hack introduced by commit 4016a139 on the impacted platforms, allowing us to get rid of the extra checking in kobjsize() for the platforms that don't perform this type of bizarre memory_end abuse (every nommu platform that isn't blackfin). If blackfin decides to get in line with every other platform and use PageReserved for the DMA pages in question, kobjsize() will also continue to work fine. It also turns out that compound_order() will give us back 0-order for non-head pages, so we can get rid of the PageCompound check and just use compound_order() directly. Clean that up while we're at it. Signed-off-by: NPaul Mundt <lethal@linux-sh.org> Reviewed-by: NChristoph Lameter <clameter@sgi.com> Acked-by: NDavid Howells <dhowells@redhat.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Jeff Mahoney 提交于
This patch fixes a compile failure in 2.6.26-rc5-git5. The variable is expected to be called ofdev. Signed-off-by: NJeff Mahoney <jeffm@suse.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip由 Linus Torvalds 提交于
* 'core/iter-div' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: always_inline timespec_add_ns add an inlined version of iter_div_u64_rem common implementation of iterative div/mod
-
由 Sam Ravnborg 提交于
Kumar Gala <galak@kernel.crashing.org> wrote: We have a case in powerpc in which we want to link some library routines with all module objects. The routines are intended for handling out-of-line function call register save/restore so having them as EXPORT_SYMBOL() is counter productive (we do also need to link the same "library" code into the kernel). Without this patch a powerpc build would error out and fail to build modules with the added register save/restore module. There were two obvious solutions: 1) To link the .o file before the modpost stage 2) To ignore the symbols in modpost Option 1) was ruled out because we do not have any separate linking stage for single file modules. This patch implements option 2 - and do so only for powerpc. The symbols we ignore are all undefined symbols named: _restgpr_*, _savegpr_*, _rest32gpr_*, _save32gpr_* Signed-off-by: NSam Ravnborg <sam@ravnborg.org> Cc: Kumar Gala <galak@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org>
-
由 Lai Jiangshan 提交于
(overflow means weight >= 2^32 here, because inv_weigh = 2^32/weight) A weight of a cfs_rq is the sum of weights of which entities are queued on this cfs_rq, so it will overflow when there are too many entities. Although, overflow occurs very rarely, but it break fairness when it occurs. 64-bits systems have more memory than 32-bit systems and 64-bit systems can create more process usually, so overflow may occur more frequently. This patch guarantees fairness when overflow happens on 64-bit systems. Thanks to the optimization of compiler, it changes nothing on 32-bit. Signed-off-by: NLai Jiangshan <laijs@cn.fujitsu.com> Acked-by: NPeter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Lai Jiangshan 提交于
I found a bug which can be reproduced by this way:(linux-2.6.26-rc5, x86-64) (use 2^32, 2^33, ...., 2^63 as shares value) # mkdir /dev/cpuctl # mount -t cgroup -o cpu cpuctl /dev/cpuctl # cd /dev/cpuctl # mkdir sub # echo 0x8000000000000000 > sub/cpu.shares # echo $$ > sub/tasks oops here! divide by zero. This is because do_div() expects the 2th parameter to be 32 bits, but unsigned long is 64 bits in x86_64. Peter Zijstra pointed it out that the sane thing to do is limit the shares value to something smaller instead of using an even more expensive divide. Also, I found another bug about "the shares value is too large": pid1 and pid2 are set affinity to cpu#0 pid1 is attached to cg1 and pid2 is attached to cg2 if cg1/cpu.shares = 1024 cg2/cpu.shares = 2000000000 then pid2 got 100% usage of cpu, and pid1 0% if cg1/cpu.shares = 1024 cg2/cpu.shares = 20000000000 then pid2 got 0% usage of cpu, and pid1 100% And a weight of a cfs_rq is the sum of weights of which entities are queued on this cfs_rq, so the shares value should be limited to a smaller value. I think that (1UL << 18) is a good limited value: 1) it's not too large, we can create a lot of group before overflow 2) it's several times the weight value for nice=-19 (not too small) Signed-off-by: NLai Jiangshan <laijs@cn.fujitsu.com> Acked-by: NPeter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Jeremy Fitzhardinge 提交于
timespec_add_ns is used from the x86-64 vdso, which cannot call out to other kernel code. Make sure that timespec_add_ns is always inlined (and only uses always_inlined functions) to make sure there are no unexpected calls. Signed-off-by: NJeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Jeremy Fitzhardinge 提交于
iter_div_u64_rem is used in the x86-64 vdso, which cannot call other kernel code. For this case, provide the always_inlined version, __iter_div_u64_rem. Signed-off-by: NJeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Jeremy Fitzhardinge 提交于
We have a few instances of the open-coded iterative div/mod loop, used when we don't expcet the dividend to be much bigger than the divisor. Unfortunately modern gcc's have the tendency to strength "reduce" this into a full mod operation, which isn't necessarily any faster, and even if it were, doesn't exist if gcc implements it in libgcc. The workaround is to put a dummy asm statement in the loop to prevent gcc from performing the transformation. This patch creates a single implementation of this loop, and uses it to replace the open-coded versions I know about. Signed-off-by: NJeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: john stultz <johnstul@us.ibm.com> Cc: Segher Boessenkool <segher@kernel.crashing.org> Cc: Christian Kujau <lists@nerdbynature.de> Cc: Robert Hancock <hancockr@shaw.ca> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6: USB: don't use reset-resume if drivers don't support it USB: isp1760: Assign resource fields before adding hcd isight_firmware: Avoid crash on loading invalid firmware USB: fix build bug in USB_ISIGHTFW
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-2.6由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-2.6: kobject: Documentation Spelling Patch dev_set_name: fix missing kernel-doc
-
git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6由 Linus Torvalds 提交于
* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6: (23 commits) ACPICA: fix stray va_end() caused by mis-merge ACPI: Reject below-freezing temperatures as invalid critical temperatures ACPICA: Fix for access to deleted object <regression> ACPICA: Fix to make _SST method optional ACPICA: Fix for Load operator, load table at the namespace root ACPICA: Ignore ACPI table signature for Load() operator ACPICA: Fix to allow zero-length ASL field declarations ACPI: use memory_read_from_buffer() bay: exit if notify handler cannot be installed dock.c remove trailing printk whitespace proper prototype for acpi_processor_tstate_has_changed() ACPI: handle invalid ACPI SLIT table PNPACPI: use _CRS IRQ descriptor length for _SRS pnpacpi: fix shareable IRQ encode/decode pnpacpi: fix IRQ flag decoding MAINTAINERS: update ACPI homepage ACPI 2.6.26-rc2: Add missing newline to DSDT/SSDT warning message ACPI: EC: Use msleep instead of udelay while waiting for event. thinkpad-acpi: fix LED handling on older ThinkPads thinkpad-acpi: fix initialization error paths ...
-
由 Linus Torvalds 提交于
This patch tries to identify which devices are able to accept reset-resume handling, by checking that there is at least one interface driver bound and that all of the drivers have a reset_resume method defined. If these conditions don't hold then during resume processing, the device is logicall disconnected. This is only a temporary fix. Later on we will explicitly unbind drivers that can't handle reset-resumes. Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org> Signed-off-by: NAlan Stern <stern@rowland.harvard.edu> Cc: Oliver Neukum <oliver@neukum.org> Cc: Pavel Machek <pavel@suse.cz> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Nate Case 提交于
This fixes the bogus "io mem 0x00000000" message printed during driver init due to hcd->rsrc_start being assigned after the call to usb_add_hcd(). Signed-off-by: NNate Case <ncase@xes-inc.com> Acked-by: NSebastian Siewior <bigeasy@linutronix.de> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Matthew Garrett 提交于
Different tools generate slightly different formats of the isight firmware. Ensure that the firmware buffer is not overrun, while still ensuring that the correct amount of data is written if trailing data is present. Signed-off-by: NMatthew Garrett <mjg@redhat.com> Report-by: NJustin Mattock <justinmattock@gmail.com> Tested-by: NJustin Mattock <justinmattock@gmail.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-