Signed-off-by: NHiroshi DOYU <Hiroshi.DOYU@nokia.com>

Rather than:

	config CPU_BLAH
		bool
		depends on ARCH_FOO || MACH_BAR
		default y if ARCH_FOO || MACH_BAR

arrange for ARCH_FOO and MACH_BAR to select CPU_BLAH directly.
Acked-by: NNicolas Pitre <nico@marvell.com>
Acked-by: NAndrew Victor <linux@maxim.org.za>
Acked-by: NBrian Swetland <swetland@google.com>
Acked-by: NEric Miao <eric.miao@marvell.com>
Acked-by: NNicolas Bellido <ml@acolin.be>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Add minimal omap3430 support based on earlier patches from
Syed Mohammed Khasim. Also merge in omap34xx SRAM support
from Karthik Dasu and use consistent naming for sram init
functions.

Also do following changes that make 34xx support usable:

- Remove unused sram.c functions for 34xx

- Rename IRQ_SIR_IRQ to INTCPS_SIR_IRQ and define it locally
  in entry-macro.S

- Update mach-omap2/io.c to support 2420, 2430, and 34xx

- Also merge in 34xx GPMC changes to add fields wr_access and
  wr_data_mux_bus from Adrian Hunter

- Remove memory initialization call omap2_init_memory() until
  until more generic memory initialization patches are posted.
  It's OK to rely on bootloader initialization until then.
Signed-off-by: NSyed Mohammed, Khasim <khasim@ti.com>
Signed-off-by: Karthik Dasu<karthik-dp@ti.com>
Signed-off-by: NAdrian Hunter <ext-adrian.hunter@nokia.com>
Signed-off-by: NTony Lindgren <tony@atomide.com>

This patch creates an interface to the clockdomain registers in the
PRM/CM modules on OMAP2/3.  This interface is intended to be used by
PM code, e.g., pm.c; not by device drivers directly.

The patch also adds clockdomain usecount tracking.  This is intended
to be called whenever the first clock in a clockdomain is enabled, or
when the last enabled clock in a clockdomain is disabled.  If the
clockdomain is in software-supervised mode, the code will force-wakeup
or force-sleep the clockdomain.  If the clockdomain is in
hardware-supervised mode, the first clock enable will add sleep and
wakeup dependencies on a user-selectable set of parent domains (usually
MPU & IVA2), and the disable will remove them.

Each clockdomain will be defined in later patches as static
structures.  The clockdomain structures are linked into a list at boot
by clkdm_register(), similar to the OMAP clock code.

The patch adds a Kconfig option, CONFIG_OMAP_DEBUG_CLOCKDOMAIN, which
when enabled will emit verbose debug messages via pr_debug().
Signed-off-by: NPaul Walmsley <paul@pwsan.com>
Signed-off-by: NTony Lindgren <tony@atomide.com>

This patch creates an interface to the powerdomain registers in the
PRM/CM modules on OMAP2/3.  This interface is intended to be used by
PM code, e.g., pm.c; not by device drivers directly.

Each powerdomain will be defined in later patches as static
structures.  Also defined are dependencies between powerdomains,
used for adding and removing PM_WKDEP and CM_SLEEPDEP bits.  The
powerdomain structures are linked into a list at boot by
pwrdm_register(), similar to the OMAP clock code.

The patch adds a Kconfig option, CONFIG_OMAP_DEBUG_POWERDOMAIN, which
when enabled will emit verbose debug messages via pr_debug().
Signed-off-by: NPaul Walmsley <paul@pwsan.com>
Signed-off-by: NTony Lindgren <tony@atomide.com>

One-shot mode was broken in MPU-timer support for OMAP1 due to a typo.

Also, ensure timer is stopped before changing the auto-reload flag.
The TRM says changing the AR flag when timer is running is undefined.

Also set GENERIC_CLOCKEVENTS for all omaps.
Signed-off-by: NTim Bird <tim.bird@am.sony.com>
Signed-off-by: NKevin Hilman <khilman@mvista.com>
Signed-off-by: NTony Lindgren <tony@atomide.com>

Additional cleanup for debug boards on H2/P2/H3/H4:  move the init
code that's not board-specific into a new file where it can be easily
shared between all the different boards (avoiding code duplication,
and making it easier to support more devices).  Make H4 use that.

This should be easy to drop in to the OMAP1 boards using these debug
cards; the only difference seems to be that the p2 does an extra reset
of the smc using the fpga (probably all boards could do that, if it's
necessary) and doesn't use the gpio mux or request APIs.
Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: NTony Lindgren <tony@atomide.com>

This patch syncs omap specific core code with linux-omap.
Most of the changes are needed to fix bitrot caused by
driver updates in linux-omap tree.
Signed-off-by: NTony Lindgren <tony@atomide.com>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

This adds generic support for the "debug board" LEDs used by most of
TI's OMAP reference boards, and board-specific support for the H4.

It's derived from the not-as-generic stuff used by OMAP1 H2/H3/P2.
Those should be able to switch easily to this version, and clean up
some of the omap1-specific code.

In addition to H4 support, one key improvement is supporting not just
the "old" ARM debug LED API (with timer and idle LEDs, plus four that
can be handy for kernel debugging), but it also supports the "new"
generic LED API (most useful for usermode stuff IMO).  Either or both
APIs can be enabled.
Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: NTony Lindgren <tony@atomide.com>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Update OMAP1 to enable support for hrtimers and dynticks by using new clocksource and clockevent infrastructure.
Signed-off-by: NKevin Hilman <khilman@mvista.com>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Standardize the miniscule percentage of occurrences of "depends" in
Kconfig files to "depends on", and update kconfig-language.txt to
reflect that.
Signed-off-by: NRobert P. J. Day <rpjday@mindspring.com>
Signed-off-by: NAdrian Bunk <bunk@stusta.de>

Port dmtimer framework to OMAP2.
Modify the dmtimers API to support setting of PWM configuration and prescaler.
Convert 32 kHz timer and GP timer to use the dmtimer framework.
Signed-off-by: NTimo Teras <timo.teras@solidboot.com>
Signed-off-by: NJuha Yrjola <juha.yrjola@solidboot.com>
Signed-off-by: NTony Lindgren <tony@atomide.com>

Patch from Tony Lindgren

Update OMAP timers from linux-omap tree. The highlights of the
patch are:

- Move timer32k code from mach-omap1 to plat-omap and make it
  work also on omap24xx by Tony Lindgren
- Add support for dmtimer idle check for PM by Tuukka Tikkanen
Signed-off-by: NTony Lindgren <tony@atomide.com>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

The default is already 'n' so there's no need to explicitly state it.
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Patch from Tony Lindgren

This patch syncs the mainline kernel with linux-omap tree.
The highlights of the patch are:
- Clock updates by Tuukka Tikkanen, Juha Yrjola,
  Daniel Petrini and Tony Lindgren
- DMA fixes by Imre Deak, Juha Yrjola and Daniel Petrini
- Add support to dual-mode hardware timers by Lauri Leukkunen
- GPIO support for 24xx by Paul Mundt
- GPIO wake-up support by Tony Lindgren
- Better GPIO interrupt handler to not lose interrupts by
  Ralph Walden and Ladislav Michl
- Power Management updates by Tuukka Tikkanen
- Make Power Management code use new SRAM functions by
  Tony Lindgren
Signed-off-by: NTony Lindgren <tony@atomide.com>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Patch from Tony Lindgren

This patch by various OMAP developers syncs the OMAP
specific arch files with the linux-omap tree.
Signed-off-by: NTony Lindgren <tony@atomide.com>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Patch from Tony Lindgren

This patch move common OMAP code from arch-omap to plat-omap
directory.
Signed-off-by: NTony Lindgren <tony@atomide.com>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>