Currently __qdisc_run calls qdisc_run_end() but does not call
qdisc_run_begin(). This makes it hard to track pairs of
qdisc_run_{begin,end} across function calls.

To simplify reading these code paths this patch moves begin/end calls
into qdisc_run().
Signed-off-by: NJohn Fastabend <john.fastabend@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Since commit 39e6c820 ("net: solve a NAPI race") napi has been able
to be rescheduled within napi_complete_done() even in non-busypoll case,
but virtnet_poll() always enabled interrupts before complete, and when
napi was rescheduled within napi_complete_done() it did not disable
interrupts.
This caused more interrupts when event idx is disabled.

According to commit cbdadbbf ("virtio_net: fix race in RX VQ
processing") we cannot place virtqueue_enable_cb_prepare() after
NAPI_STATE_SCHED is cleared, so disable interrupts again if
napi_complete_done() returned false.

Tested with vhost-user of OVS 2.7 on host, which does not have the event
idx feature.

* Before patch:

$ netperf -t UDP_STREAM -H 192.168.150.253 -l 60 -- -m 1472
MIGRATED UDP STREAM TEST from 0.0.0.0 (0.0.0.0) port 0 AF_INET to 192.168.150.253 () port 0 AF_INET
Socket  Message  Elapsed      Messages
Size    Size     Time         Okay Errors   Throughput
bytes   bytes    secs            #      #   10^6bits/sec

212992    1472   60.00     32763206      0    6430.32
212992           60.00     23384299           4589.56

Interrupts on guest: 9872369
Packets/interrupt:   2.37

* After patch

$ netperf -t UDP_STREAM -H 192.168.150.253 -l 60 -- -m 1472
MIGRATED UDP STREAM TEST from 0.0.0.0 (0.0.0.0) port 0 AF_INET to 192.168.150.253 () port 0 AF_INET
Socket  Message  Elapsed      Messages
Size    Size     Time         Okay Errors   Throughput
bytes   bytes    secs            #      #   10^6bits/sec

212992    1472   60.00     32794646      0    6436.49
212992           60.00     32793501           6436.27

Interrupts on guest: 4941299
Packets/interrupt:   6.64
Signed-off-by: NToshiaki Makita <makita.toshiaki@lab.ntt.co.jp>
Acked-by: NMichael S. Tsirkin <mst@redhat.com>
Acked-by: NJason Wang <jasowang@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Alexei Starovoitov says:

====================
pull-request: bpf-next 2017-12-07

The following pull-request contains BPF updates for your net-next tree.

The main changes are:

1) Detailed documentation of BPF development process from Daniel.

2) Addition of is_fullsock, snd_cwnd and srtt_us fields to bpf_sock_ops
   from Lawrence.

3) Minor follow up for bpf_skb_set_tunnel_key() from William.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Private destructor could be called when register_netdev() fail with
rtnl lock held. This will lead deadlock in tun_free_netdev() who tries
to hold rtnl_lock. Fixing this by switching to use spinlock to
synchronize.

Fixes: 96f84061 ("tun: add eBPF based queue selection method")
Reported-by: NEric Dumazet <eric.dumazet@gmail.com>
Cc: Eric Dumazet <eric.dumazet@gmail.com>
Cc: Willem de Bruijn <willemb@google.com>
Signed-off-by: NJason Wang <jasowang@redhat.com>
Acked-by: NMichael S. Tsirkin <mst@redhat.com>
Reviewed-by: NEric Dumazet <edumazet@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Ursula Braun says:

====================
smc: fixes 2017-12-07

here are some smc-patches. The initial 4 patches are cleanups.
Patch 5 gets rid of ib_post_sends in tasklet context to avoid peer drops due
to out-of-order receivals.
Patch 6 makes sure, the Linux SMC code understands variable sized CLC proposal
messages built according to RFC7609.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

According to RFC7609 [1] the CLC proposal message contains an area of
unknown length for future growth. Additionally it may contain up to
8 IPv6 prefixes. The current version of the SMC-code does not
understand CLC proposal messages using these variable length fields and,
thus, is incompatible with SMC implementations in other operating
systems.

This patch makes sure, SMC understands incoming CLC proposals
* with arbitrary length values for future growth
* with up to 8 IPv6 prefixes

[1] SMC-R Informational RFC: http://www.rfc-editor.org/info/rfc7609Signed-off-by: NUrsula Braun <ubraun@linux.vnet.ibm.com>
Reviewed-by: NHans Wippel <hwippel@linux.vnet.ibm.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The SMC protocol requires to send a separate consumer cursor update,
if it cannot be piggybacked to updates of the producer cursor.
When receiving a blocked signal from the sender, this update is sent
already in tasklet context. In addition consumer cursor updates are
sent after data receival.
Sending of cursor updates is controlled by sequence numbers.
Assuming receiving stray messages the receiver drops updates with older
sequence numbers than an already received cursor update with a higher
sequence number.
Sending consumer cursor updates in tasklet context may result in
wrong order sends and its corresponding drops at the receiver. Since
it is sufficient to send consumer cursor updates once the data is
received, this patch gets rid of the consumer cursor update in tasklet
context to guarantee in-sequence arrival of cursor updates.
Signed-off-by: NUrsula Braun <ubraun@linux.vnet.ibm.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When waiting for data to be received it must be checked if the
peer signals shutdown. The SMC code uses two different checks
for this purpose, even though just one check is sufficient.
This patch removes the superfluous test for SOCK_DONE.
Signed-off-by: NUrsula Braun <ubraun@linux.vnet.ibm.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The smc code never checks the sk_write_pending sock field.
Thus there is no need to update it.
Signed-off-by: NUrsula Braun <ubraun@linux.vnet.ibm.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Let smc_clc_send_decline() return with an error, if the amount
sent is smaller than the length of an smc decline message.
Signed-off-by: NUrsula Braun <ubraun@linux.vnet.ibm.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

smc_close_active_abort() is used in smc_close.c only.
Make it static.
Signed-off-by: NUrsula Braun <ubraun@linux.vnet.ibm.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Introduce a configuration option: CONFIG_NET_DSA_LEGACY allowing to compile out
support for the old platform device and Device Tree binding registration.
Support for these configurations is scheduled to be removed in 4.17.
Signed-off-by: NFlorian Fainelli <f.fainelli@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

On some dual port NICs, the 2 ports have to be configured with compatible
link speeds.  Under some conditions, a port's configured speed may no
longer be supported.  The firmware will send a message to the driver
when this happens.

Improve this logic that prints out the warning by only printing it if
we can determine the link speed that is no longer supported.  If the
speed is unknown or it is in autoneg mode, skip the warning message.
Reported-by: NThomas Bogendoerfer <tbogendoerfer@suse.de>
Signed-off-by: NMichael Chan <michael.chan@broadcom.com>
Tested-by: NThomas Bogendoerfer <tbogendoerfer@suse.de>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Daniel Borkmann says:

====================
Few BPF doc updates

Two changes, i) add BPF trees into maintainers file, and ii) add
a BPF doc around the development process, similarly as we have
with netdev FAQ, but just describing BPF specifics. Thanks!
====================
Signed-off-by: NAlexei Starovoitov <ast@kernel.org>

In the same spirit of netdev FAQ, start a BPF FAQ as a collection
of expectations and/or workflow details in the context of BPF patch
processing.
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>
Acked-by: NAlexei Starovoitov <ast@kernel.org>
Signed-off-by: NAlexei Starovoitov <ast@kernel.org>

i) Add the bpf and bpf-next trees to the maintainers entry
   so they can be found easily and picked up by test bots
   etc that would integrate all trees from maintainers file.
   Suggested by Stephen while integrating the trees into
   linux-next.

ii) Add the two headers defining BPF/XDP tracepoints to the
    list of files as well.
Suggested-by: NStephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>
Acked-by: NAlexei Starovoitov <ast@kernel.org>
Signed-off-by: NAlexei Starovoitov <ast@kernel.org>

The recv flow of ipvlan l2 mode performs as same as l3 mode for
non-multicast packet, so use the existing func ipvlan_handle_mode_l3
instead of these duplicated statements in non-multicast case.
Signed-off-by: NGao Feng <gfree.wind@vip.163.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Currently, whenever the NETIF_F_HW_TC feature changes, we silently
always allow it, but we actually do not disable the flows in HW
on disable. That breaks user's expectations. So just forbid
the feature disable in case there are any filters offloaded.
Signed-off-by: NJiri Pirko <jiri@mellanox.com>
Reviewed-by: NIdo Schimmel <idosch@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The statement no longer serves a purpose.

Commit fa35864e ("tuntap: Fix for a race in accessing numqueues")
added the ACCESS_ONCE to avoid a race condition with skb_queue_len.

Commit 436acceb ("tuntap: remove unnecessary sk_receive_queue
length check during xmit") removed the affected skb_queue_len check.

Commit 96f84061 ("tun: add eBPF based queue selection method")
split the function, reading the field a second time in the callee.
The temp variable is now only read once, so just remove it.
Signed-off-by: NWillem de Bruijn <willemb@google.com>
Acked-by: NJason Wang <jasowang@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

t_name cannot be NULL since it is an array field of a struct.
Replacing null check on static array with string length check using
strnlen()
Signed-off-by: NPrashant Bhole <bhole_prashant_q7@lab.ntt.co.jp>
Acked-by: NSowmini Varadhan <sowmini.varadhan@oracle.com>
Acked-by: NSantosh Shilimkar <santosh.shilimkar@oracle.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

TC actions are no longer freed in RCU callbacks and we should
always have RTNL lock, so this spinlock is no longer needed.

Cc: Eric Dumazet <eric.dumazet@gmail.com>
Cc: Jiri Pirko <jiri@mellanox.com>
Cc: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: NCong Wang <xiyou.wangcong@gmail.com>
Acked-by: NJiri Pirko <jiri@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

tcfm_dev always points to the correct netdev and we already
hold a refcnt, so no need to use tcfm_ifindex to lookup again.

If we would support moving target netdev across netns, using
pointer would be better than ifindex.

This also fixes dumping obsolete ifindex, now after the
target device is gone we just dump 0 as ifindex.

Cc: Jiri Pirko <jiri@mellanox.com>
Cc: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: NCong Wang <xiyou.wangcong@gmail.com>
Acked-by: NJiri Pirko <jiri@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

William Tu says:

====================
ipv6: add ip6erspan collect_md mode

Similar to erspan collect_md mode in ipv4, the first patch adds
support for ip6erspan collect metadata mode.  The second patch
adds the test case using bpf_skb_[gs]et_tunnel_key helpers.

The corresponding iproute2 patch:
https://marc.info/?l=linux-netdev&m=151251545410047&w=2
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Extend the existing tests for ip6erspan.
Signed-off-by: NWilliam Tu <u9012063@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Similar to ip6 gretap and ip4 gretap, the patch allows
erspan tunnel to operate in collect metadata mode.
bpf_skb_[gs]et_tunnel_key() helpers can make use of
it right away.
Signed-off-by: NWilliam Tu <u9012063@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Smatch warns that:

    drivers/net/ethernet/broadcom/bnxt/bnxt_tc.c:160 bnxt_tc_parse_actions()
    error: uninitialized symbol 'rc'.

"rc" is either uninitialized or set to zero here so we can just remove
the check.

Fixes: 8c95f773 ("bnxt_en: add support for Flower based vxlan encap/decap offload")
Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com>
Acked-by: NMichael Chan <michael.chan@broadcom.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Julia Cartwright says:

====================
macb rx filter cleanups

Here's a proper patchset based on net-next.

v1 -> v2:
  - Rebased on net-next
  - Add Nicolas's Acks
  - Reorder commits, putting the list_empty() cleanups prior to the
    others.
  - Added commit reverting the GFP_ATOMIC change.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Now that the rx_fs_lock is no longer held across allocation, it's safe
to use GFP_KERNEL for allocating new entries.

This reverts commit 81da3bf6 ("net: macb: change GFP_KERNEL to
GFP_ATOMIC").

Cc: Julia Lawall <julia.lawall@lip6.fr>
Signed-off-by: NJulia Cartwright <julia@ni.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Commit ae8223de ("net: macb: Added support for RX filtering")
introduces a lock, rx_fs_lock which is intended to protect the list of
rx_flow items and synchronize access to the hardware rx filtering
registers.

However, the region protected by this lock is overscoped, unnecessarily
including things like slab allocation.  Reduce this lock scope to only
include operations which must be performed atomically: list traversal,
addition, and removal, and hitting the macb filtering registers.

This fixes the use of kmalloc w/ GFP_KERNEL in atomic context.

Fixes: ae8223de ("net: macb: Added support for RX filtering")
Cc: Rafal Ozieblo <rafalo@cadence.com>
Cc: Julia Lawall <julia.lawall@lip6.fr>
Acked-by: NNicolas Ferre <nicolas.ferre@microchip.com>
Signed-off-by: NJulia Cartwright <julia@ni.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The list_for_each_entry() macro already handles the case where the list
is empty (by not executing the loop body).  It's not necessary to handle
this case specially, so stop doing so.

Cc: Rafal Ozieblo <rafalo@cadence.com>
Acked-by: NNicolas Ferre <nicolas.ferre@microchip.com>
Signed-off-by: NJulia Cartwright <julia@ni.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

No one actually uses it.

Cc: Jiri Pirko <jiri@mellanox.com>
Cc: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: NCong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Vivien Didelot says:

====================
net: dsa: use per-port upstream port

An upstream port is a local switch port used to reach a CPU port.

DSA still considers a unique CPU port in the whole switch fabric and
thus return a unique upstream port for a given switch. This is wrong in
a multiple CPU ports environment.

We are now switching to using the dedicated CPU port assigned to each
port in order to get rid of the deprecated unique tree CPU port.

This patchset makes the dsa_upstream_port() helper take a port argument
and goes one step closer complete support for multiple CPU ports.

Changes in v2:
  - reverse-christmas-tree-fy variables
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The current dsa_upstream_port() helper still assumes a unique CPU port
in the whole switch fabric. This is becoming wrong, as every port in the
fabric has its dedicated CPU port, thus every port has an upstream port.

Add a port argument to the dsa_upstream_port() helper and fetch its CPU
port instead of the deprecated unique fabric CPU port. A CPU or unused
port has no dedicated CPU port, so return itself in this case.

At the same time, change the return value from u8 to unsigned int since
there is no need to limit the size here.
Signed-off-by: NVivien Didelot <vivien.didelot@savoirfairelinux.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

DSA ports also need to have a dedicated CPU port assigned to them,
because they need to know where to egress frames targeting the CPU,
e.g. To_Cpu frames received on a Marvell Tag port.
Signed-off-by: NVivien Didelot <vivien.didelot@savoirfairelinux.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Move the setup of the global upstream port within the
mv88e6xxx_setup_upstream_port function.
Signed-off-by: NVivien Didelot <vivien.didelot@savoirfairelinux.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Add a helper function to setup the upstream port of a given port.

This is the port used to reach the dedicated CPU port. This function
will be extended later to setup the global upstream port as well.
Signed-off-by: NVivien Didelot <vivien.didelot@savoirfairelinux.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The mv88e6xxx driver currently assumes a single CPU port in the fabric
and thus floods frames with unknown DA on a single DSA port, the one
that is one hop closer to the CPU port.

With multiple CPU ports in mind, this isn't true anymore because CPU
ports could be found behind both DSA ports of a device in-between
others.

For example in a A <-> B <-> C fabric, both A and C having CPU ports,
device B will have to flood such frame to its two DSA ports.

This patch considers both CPU and DSA ports of a device as upstream
ports, where to flood frames with unknown DA addresses.
Signed-off-by: NVivien Didelot <vivien.didelot@savoirfairelinux.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Alexander Aring says:

====================
net: sched: sch_api: fix coding style issues for extack

this patch prepares to handle extack for qdiscs and fixes checkpatch
issues.

There are a bunch of warnings issued by checkpatch which bothered me.
This first patchset is to get rid of those warnings to make way for
the next patchsets.

I plan to followup with qdiscs, classifiers and actions after this.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch fixes the following checkpatch error:

ERROR: do not use assignment in if condition

by rearranging the if condition to execute init callback only if init
callback exists. The whole setup afterwards is called in any case,
doesn't matter if init callback is set or not. This patch has the same
behaviour as before, just without assign err variable in if condition.
It also makes the code easier to read.
Reviewed-by: NJamal Hadi Salim <jhs@mojatatu.com>
Cc: David Ahern <dsahern@gmail.com>
Signed-off-by: NAlexander Aring <aring@mojatatu.com>
Acked-by: NJamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch fix checkpatch issues for upcomming patches according to the
sched api file. It changes checking on null pointer, remove unnecessary
brackets, add variable names for parameters and adjust 80 char width.

Cc: David Ahern <dsahern@gmail.com>
Signed-off-by: NAlexander Aring <aring@mojatatu.com>
Acked-by: NJamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>