- 21 12月, 2009 7 次提交
-
-
由 Paul Mundt 提交于
This follows the x86 change to select perf events when hw_breakpoint support is enabled. This fixes up build issues where perf events can otherwise be disabled on their own. Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
由 Paul Mundt 提交于
The event callback handling has been removed in favour of going through a generic event handler to handle overflows. Follows the x86 change. Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
由 Paul Mundt 提交于
-
由 Paul Mundt 提交于
-
由 Paul Mundt 提交于
We don't actually require this in the cpu_relax() polling case, so just cuddle these around the sleeping version. Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
由 Paul Mundt 提交于
This fixes up some crashes with IRQs racing the need_resched() test under QEMU. Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
- 20 12月, 2009 10 次提交
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/mattst88/alpha-2.6由 Linus Torvalds 提交于
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mattst88/alpha-2.6: alpha: Convert BUG() to use unreachable() alpha: Add minimal support for software performance events alpha: Wire up missing/new syscalls
-
git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev由 Linus Torvalds 提交于
* 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev: sata_mv: remove pointless NULL test pata_hpt3x2n: fix clock turnaround libata: fix reporting of drained bytes when clearing DRQ sata_mv: add power management support for the PCI controllers. sata_mv: store the board_idx into the host private data pata_octeon_cf: use resource_size(), to fix resource sizing bug libata: use the WRITE_SAME_16 define sata_mv: move the PCI bar description initialization code sata_mv: add power management support for the platform driver sata_mv: support clkdev framework sata_mv: increase PIO IORDY timeout Fixed crazy mode-change in merge.
-
由 Linus Torvalds 提交于
Merge branch 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: perf session: Make events_stats u64 to avoid overflow on 32-bit arches hw-breakpoints: Fix hardware breakpoints -> perf events dependency perf events: Dont report side-band events on each cpu for per-task-per-cpu events perf events, x86/stacktrace: Fix performance/softlockup by providing a special frame pointer-only stack walker perf events, x86/stacktrace: Make stack walking optional perf events: Remove unused perf_counter.h header file perf probe: Check new event name kprobe-tracer: Check new event/group name perf probe: Check whether debugfs path is correct perf probe: Fix libdwarf include path for Debian
-
由 Linus Torvalds 提交于
Merge branch 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: x86, irq: Allow 0xff for /proc/irq/[n]/smp_affinity on an 8-cpu system Makefile: Unexport LC_ALL instead of clearing it x86: Fix objdump version check in arch/x86/tools/chkobjdump.awk x86: Reenable TSC sync check at boot, even with NONSTOP_TSC x86: Don't use POSIX character classes in gen-insn-attr-x86.awk Makefile: set LC_CTYPE, LC_COLLATE, LC_NUMERIC to C x86: Increase MAX_EARLY_RES; insufficient on 32-bit NUMA x86: Fix checking of SRAT when node 0 ram is not from 0 x86, cpuid: Add "volatile" to asm in native_cpuid() x86, msr: msrs_alloc/free for CONFIG_SMP=n x86, amd: Get multi-node CPU info from NodeId MSR instead of PCI config space x86: Add IA32_TSC_AUX MSR and use it x86, msr/cpuid: Register enough minors for the MSR and CPUID drivers initramfs: add missing decompressor error check bzip2: Add missing checks for malloc returning NULL bzip2/lzma/gzip: pre-boot malloc doesn't return NULL on failure
-
由 Linus Torvalds 提交于
Merge branch 'sched-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'sched-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (25 commits) sched: Fix broken assertion sched: Assert task state bits at build time sched: Update task_state_arraypwith new states sched: Add missing state chars to TASK_STATE_TO_CHAR_STR sched: Move TASK_STATE_TO_CHAR_STR near the TASK_state bits sched: Teach might_sleep() about preemptible RCU sched: Make warning less noisy sched: Simplify set_task_cpu() sched: Remove the cfs_rq dependency from set_task_cpu() sched: Add pre and post wakeup hooks sched: Move kthread_bind() back to kthread.c sched: Fix select_task_rq() vs hotplug issues sched: Fix sched_exec() balancing sched: Ensure set_task_cpu() is never called on blocked tasks sched: Use TASK_WAKING for fork wakups sched: Select_task_rq_fair() must honour SD_LOAD_BALANCE sched: Fix task_hot() test order sched: Fix set_cpu_active() in cpu_down() sched: Mark boot-cpu active before smp_init() sched: Fix cpu_clock() in NMIs, on !CONFIG_HAVE_UNSTABLE_SCHED_CLOCK ...
-
由 Linus Torvalds 提交于
Merge branch 'core-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'core-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: sys: Fix missing rcu protection for __task_cred() access signals: Fix more rcu assumptions signal: Fix racy access to __task_cred in kill_pid_info_as_uid()
-
由 Linus Torvalds 提交于
Merge branch 'timers-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'timers-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: timers: Remove duplicate setting of new_base in __mod_timer() clockevents: Prevent clockevent_devices list corruption on cpu hotplug
-
git://git390.marist.edu/pub/scm/linux-2.6由 Linus Torvalds 提交于
* 'for-linus' of git://git390.marist.edu/pub/scm/linux-2.6: [S390] Use strim instead of strstrip to avoid false warnings. [S390] qdio: add counter for input queue full condition [S390] qdio: remove superfluous log entries and WARN_ONs. [S390] ptrace: dont abuse PT_PTRACED [S390] cio: fix channel path vary [S390] drivers: Correct size given to memset [S390] tape: Add pr_fmt() macro to all tape source files [S390] rename NT_PRXSTATUS to NT_S390_HIGHREGS [S390] tty: PTR_ERR return of wrong pointer in fs3270_open() [S390] s390: PTR_ERR return of wrong pointer in fallback_init_cip() [S390] dasd: PTR_ERR return of wrong pointer in [S390] dasd: move dasd-diag kmsg to dasd [S390] cio: fix drvdata usage for the console subchannel [S390] wire up sys_recvmmsg
-
由 Al Viro 提交于
Several leaks in audit_tree didn't get caught by commit 318b6d3d, including the leak on normal exit in case of multiple rules refering to the same chunk. Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Al Viro 提交于
... aka "Al had badly fscked up when writing that thing and nobody noticed until Eric had fixed leaks that used to mask the breakage". The function essentially creates a copy of old array sans one element and replaces the references to elements of original (they are on cyclic lists) with those to corresponding elements of new one. After that the old one is fair game for freeing. First of all, there's a dumb braino: when we get to list_replace_init we use indices for wrong arrays - position in new one with the old array and vice versa. Another bug is more subtle - termination condition is wrong if the element to be excluded happens to be the last one. We shouldn't go until we fill the new array, we should go until we'd finished the old one. Otherwise the element we are trying to kill will remain on the cyclic lists... That crap used to be masked by several leaks, so it was not quite trivial to hit. Eric had fixed some of those leaks a while ago and the shit had hit the fan... Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 19 12月, 2009 15 次提交
-
-
由 Andres Salomon 提交于
Update to the new cs5535_mfgpt* API. The geode-specific wording should eventually be dropped from this driver... Signed-off-by: NAndres Salomon <dilinger@collabora.co.uk> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Heiko Carstens 提交于
Cc: Michael Holzheu <holzheu@linux.vnet.ibm.com> Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Jan Glauber 提交于
Add a counter to the qdio performance statistics that indicates that no free buffers were left in the input queue. If the counter gets increased it means that the qdio adapter filled all available buffers and possibly had more buffers ready but could not transmit them. Signed-off-by: NJan Glauber <jang@linux.vnet.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Jan Glauber 提交于
* Don't write debug feature log entries for sl, slsb and sbal since these elements can be located from the qdio_q pointer which is also logged. * Convert WARN_ON for wrong alignment of sbal to BUG_ON. * Remove WARN_ON's for wrong alignment of q / qib / slib since these alignments should be guaranteed by kmem_cache_alloc alignment / struct aligned attribute / __get_free_page. Signed-off-by: NJan Glauber <jang@linux.vnet.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Oleg Nesterov 提交于
Nobody except ptrace itself should use task->ptrace or PT_PTRACED directly, change arch/s390/kernel/traps.c to use the helper. Signed-off-by: NOleg Nesterov <oleg@redhat.com> Acked-by: NRoland McGrath <roland@redhat.com> Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Peter Oberparleiter 提交于
Channel path vary is currently broken: channel paths which are varied offline are still used by Linux. The reason for this is that: * the path mask indicating which paths of an I/O device can be used is reset by each internal I/O request * the logic that checks if a path group is already in its designated target state incorrectly interprets the result "is correctly set" as "is correctly set and available" Fix this by resetting the path mask only for internal I/O requests which affect the path mask and by correcting the pgid check logic. Signed-off-by: NPeter Oberparleiter <peter.oberparleiter@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Julia Lawall 提交于
Memset should be given the size of the structure, not the size of the pointer. The semantic patch that makes this change is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ type T; T *x; expression E; @@ memset(x, E, sizeof( + * x)) // </smpl> Signed-off-by: NJulia Lawall <julia@diku.dk> Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Michael Holzheu 提交于
Without defining the pr_fmt() macro, the "tape: " prefix will not be printed when using the pr_xxx printk macros. This patch adds the missing definitions. Signed-off-by: NMichael Holzheu <holzheu@linux.vnet.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Martin Schwidefsky 提交于
The elf notes number for the upper register halves is s390 specific. Change the name of the elf notes to include S390. Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Roel Kluin 提交于
Return the PTR_ERR of the correct pointer. Signed-off-by: NRoel Kluin <roel.kluin@gmail.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Roel Kluin 提交于
Return the PTR_ERR of the correct pointer. Signed-off-by: NRoel Kluin <roel.kluin@gmail.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Roel Kluin 提交于
Return the PTR_ERR of the correct pointer. Signed-off-by: NRoel Kluin <roel.kluin@gmail.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Stefan Haberland 提交于
The DIAG discipline does not have a own driver name. It shows up as dasd-eckd or dasd-fba. So messages for dasd-diag are moved to the generic dasd part. Signed-off-by: NStefan Haberland <stefan.haberland@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Sebastian Ott 提交于
Using dev_set_drvdata prior to device_register will force the driver core to kmalloc its private data. Since we use this for the console subchannel lets set the drvdata before taking the subchannels spinlock. Signed-off-by: NSebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Heiko Carstens 提交于
Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
- 18 12月, 2009 8 次提交
-
-
由 Arnaldo Carvalho de Melo 提交于
Pekka Enberg reported weird percentages in perf report. It turns out we are overflowing a 32-bit variables in struct events_stats on 32-bit architectures. Before: [acme@ana linux-2.6-tip]$ perf report -i pekka.perf.data 2> /dev/null | head -10 281.96% Xorg b710a561 [.] 0x000000b710a561 140.15% Xorg [kernel] [k] __initramfs_end 51.56% metacity libgobject-2.0.so.0.2000.1 [.] 0x00000000026e46 35.12% evolution libcairo.so.2.10800.6 [.] 0x000000000203bd 33.84% metacity libpthread-2.9.so [.] 0x00000000007a3d After: [acme@ana linux-2.6-tip]$ perf report -i pekka.perf.data 2> /dev/null | head -10 30.04% Xorg b710a561 [.] 0x000000b710a561 14.93% Xorg [kernel] [k] __initramfs_end 5.49% metacity libgobject-2.0.so.0.2000.1 [.] 0x00000000026e46 3.74% evolution libcairo.so.2.10800.6 [.] 0x000000000203bd 3.61% metacity libpthread-2.9.so [.] 0x00000000007a3d Reported-by: NPekka Enberg <penberg@cs.helsinki.fi> Tested-by: NPekka Enberg <penberg@cs.helsinki.fi> Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> LKML-Reference: <1261148583-20395-1-git-send-email-acme@infradead.org> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Frederic Weisbecker 提交于
The kbuild's select command doesn't propagate through the config dependencies. Hence the current rules of hardware breakpoint's config can't ensure perf can never be disabled under us. We have: config X86 selects HAVE_HW_BREAKPOINTS config HAVE_HW_BREAKPOINTS select PERF_EVENTS config PERF_EVENTS [...] x86 will select the breakpoints but that won't propagate to perf events. The user can still disable the latter, but it is necessary for the breakpoints. What we need is: - x86 selects HAVE_HW_BREAKPOINTS and PERF_EVENTS - HAVE_HW_BREAKPOINTS depends on PERF_EVENTS so that we ensure PERF_EVENTS is enabled and frozen for x86. This fixes the following kind of build errors: In file included from arch/x86/kernel/hw_breakpoint.c:31: include/linux/hw_breakpoint.h: In function 'hw_breakpoint_addr': include/linux/hw_breakpoint.h:39: error: 'struct perf_event' has no member named 'attr' v2: Select also ANON_INODES from x86, required for perf Reported-by: NCyrill Gorcunov <gorcunov@gmail.com> Reported-by: NMichal Marek <mmarek@suse.cz> Reported-by: NAndrew Randrianasulu <randrik_a@yahoo.com> Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Randy Dunlap <randy.dunlap@oracle.com> Cc: K.Prasad <prasad@linux.vnet.ibm.com> LKML-Reference: <1261010034-7786-1-git-send-regression-fweisbec@gmail.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 David Daney 提交于
Use the new unreachable() macro instead of for(;;); Signed-off-by: NDavid Daney <ddaney@caviumnetworks.com> CC: Richard Henderson <rth@twiddle.net> CC: Ivan Kokshaysky <ink@jurassic.park.msu.ru> CC: linux-alpha@vger.kernel.org Signed-off-by: NMatt Turner <mattst88@gmail.com>
-
由 Michael Cree 提交于
In the kernel the patch enables configuration of the perf event option, adds the perf_event_open syscall, and includes a minimal architecture specific asm/perf_event.h header file. Signed-off-by: NMichael Cree <mcree@orcon.net.nz> Cc: Richard Henderson <rth@twiddle.net> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> Cc: Ingo Molnar <mingo@elte.hu> Signed-off-by: NMatt Turner <mattst88@gmail.com>
-
由 Daniele Calore 提交于
This wire up the: fallocate, timerfd_create, timerfd_settime, timerfd_gettime, signalfd4, eventfd2, epoll_create1, dup3, pipe2, inotify_init1, preadv, pwritev and rt_tgsigqueueinfo syscalls for the alpha port. For umount2, alpha have an "old" and "new" version called: oldumount and umount; so ignore umount2. Rebased on top of 6e17e8b9 by Matt Turner. Signed-off-by: NDaniele Calore <orkaan@orkaan.org> Cc: Richard Henderson <rth@twiddle.net> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Signed-off-by: NMatt Turner <mattst88@gmail.com>
-
由 Suresh Siddha 提交于
John Blackwood reported: > on an older Dell PowerEdge 6650 system with 8 cpus (4 are hyper-threaded), > and 32 bit (x86) kernel, once you change the irq smp_affinity of an irq > to be less than all cpus in the system, you can never change really the > irq smp_affinity back to be all cpus in the system (0xff) again, > even though no error status is returned on the "/bin/echo ff > > /proc/irq/[n]/smp_affinity" operation. > > This is due to that fact that BAD_APICID has the same value as > all cpus (0xff) on 32bit kernels, and thus the value returned from > set_desc_affinity() via the cpu_mask_to_apicid_and() function is treated > as a failure in set_ioapic_affinity_irq_desc(), and no affinity changes > are made. set_desc_affinity() is already checking if the incoming cpu mask intersects with the cpu online mask or not. So there is no need for the apic op cpu_mask_to_apicid_and() to check again and return BAD_APICID. Remove the BAD_APICID return value from cpu_mask_to_apicid_and() and also fix set_desc_affinity() to return -1 instead of using BAD_APICID to represent error conditions (as cpu_mask_to_apicid_and() can return logical or physical apicid values and BAD_APICID is really to represent bad physical apic id). Reported-by: NJohn Blackwood <john.blackwood@ccur.com> Root-caused-by: NJohn Blackwood <john.blackwood@ccur.com> Signed-off-by: NSuresh Siddha <suresh.b.siddha@intel.com> LKML-Reference: <1261103386.2535.409.camel@sbs-t61> Signed-off-by: NH. Peter Anvin <hpa@zytor.com>
-
由 Linus Torvalds 提交于
-
由 Linus Torvalds 提交于
Merge branch 'cpumask-cleanups' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6-for-linus * 'cpumask-cleanups' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6-for-linus: cpumask: rename tsk_cpumask to tsk_cpus_allowed cpumask: don't recommend set_cpus_allowed hack in Documentation/cpu-hotplug.txt cpumask: avoid dereferencing struct cpumask cpumask: convert drivers/idle/i7300_idle.c to cpumask_var_t cpumask: use modern cpumask style in drivers/scsi/fcoe/fcoe.c cpumask: avoid deprecated function in mm/slab.c cpumask: use cpu_online in kernel/perf_event.c
-