- 06 10月, 2012 1 次提交
-
-
由 Joe Mario 提交于
Fix the const sections for the code generated by crc32 table. There's no ro version of the cacheline aligned section, so we cannot put in const data without a conflict Just don't make the crc tables const for now. [ak@linux.intel.com: some fixes and new description] [akpm@linux-foundation.org: checkpatch fixes] Signed-off-by: NJoe Mario <jmario@redhat.com> Signed-off-by: NAndi Kleen <ak@linux.intel.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 25 9月, 2012 1 次提交
-
-
由 Jan Kara 提交于
When racing with CPU hotplug, percpu_counter_sum() can return negative values for the number of observed events. This confuses fprop_new_period(), which uses unsigned type and as a result number of events is set to big *positive* number. From that moment on, things go pear shaped and can result e.g. in division by zero as denominator is later truncated to 32-bits. This bug causes a divide-by-zero oops in bdi_dirty_limit() in Borislav's 3.6.0-rc6 based kernel. Fix the issue by using a signed type in fprop_new_period(). That makes us bail out from the function without doing anything (mistakenly) thinking there are no events to age. That makes aging somewhat inaccurate but getting accurate data would be rather hard. Signed-off-by: NJan Kara <jack@suse.cz> Reported-by: NBorislav Petkov <bp@amd64.org> Reported-by: NSrivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: <stable@vger.kernel.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 23 9月, 2012 1 次提交
-
-
由 Paul E. McKenney 提交于
There have been some recent bugs that were triggered only when preemptible RCU's __rcu_read_unlock() was preempted just after setting ->rcu_read_lock_nesting to INT_MIN, which is a low-probability event. Therefore, reproducing those bugs (to say nothing of gaining confidence in alleged fixes) was quite difficult. This commit therefore creates a new debug-only RCU kernel config option that forces a short delay in __rcu_read_unlock() to increase the probability of those sorts of bugs occurring. Signed-off-by: NPaul E. McKenney <paul.mckenney@linaro.org> Signed-off-by: NPaul E. McKenney <paulmck@linux.vnet.ibm.com> Reviewed-by: NJosh Triplett <josh@joshtriplett.org>
-
- 17 9月, 2012 5 次提交
-
-
由 Joe Perches 提交于
Convert direct calls of vprintk_emit and printk_emit to the dev_ equivalents. Make create_syslog_header static. Signed-off-by: NJoe Perches <joe@perches.com> Acked-by: NDavid S. Miller <davem@davemloft.net> Tested-by: NJim Cromie <jim.cromie@gmail.com> Acked-by: NJason Baron <jbaron@redhat.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Joe Perches 提交于
netdev_printk originally called dev_printk with %pV. This style emitted the complete dev_printk header with a colon followed by the netdev_name prefix followed by a colon. Now that netdev_printk does not call dev_printk, the extra colon is superfluous. Remove it. Example: old: sky2 0000:02:00.0: eth0: Link is up at 100 Mbps, full duplex, flow control both new: sky2 0000:02:00.0 eth0: Link is up at 100 Mbps, full duplex, flow control both Signed-off-by: NJoe Perches <joe@perches.com> Acked-by: NDavid S. Miller <davem@davemloft.net> Tested-by: NJim Cromie <jim.cromie@gmail.com> Acked-by: NJason Baron <jbaron@redhat.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Joe Perches 提交于
A lot of stack is used in recursive printks with %pV. Using multiple levels of %pV (a logging function with %pV that calls another logging function with %pV) can consume more stack than necessary. Avoid excessive stack use by not calling dev_printk from netdev_printk and dynamic_netdev_dbg. Duplicate the logic and form of dev_printk instead. Make __netdev_printk static. Remove EXPORT_SYMBOL(__netdev_printk) Whitespace and brace style neatening. Signed-off-by: NJoe Perches <joe@perches.com> Acked-by: NDavid S. Miller <davem@davemloft.net> Tested-by: NJim Cromie <jim.cromie@gmail.com> Acked-by: NJason Baron <jbaron@redhat.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Joe Perches 提交于
commit c4e00daa ("driver-core: extend dev_printk() to pass structured data") changed __dev_printk and broke dynamic-debug's ability to control the dynamic prefix of dev_dbg(dev,..). commit af7f2158 ("drivers-core: make structured logging play nice with dynamic-debug") made a minimal correction. The current dynamic debug code uses up to 3 recursion levels via %pV. This can consume quite a bit of stack. Directly call printk_emit to reduce the recursion depth. These changes include: dev_dbg: o Create and use function create_syslog_header to format the syslog header for printk_emit uses. o Call create_syslog_header and neaten __dev_printk o Make __dev_printk static not global o Remove include header declaration of __dev_printk o Remove now unused EXPORT_SYMBOL() of __dev_printk o Whitespace neatening dynamic_dev_dbg: o Remove KERN_DEBUG from dynamic_emit_prefix o Call create_syslog_header and printk_emit o Whitespace neatening Signed-off-by: NJoe Perches <joe@perches.com> Acked-by: NDavid S. Miller <davem@davemloft.net> Tested-by: NJim Cromie <jim.cromie@gmail.com> Acked-by: NJason Baron <jbaron@redhat.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Catalin Marinas 提交于
This patch adds Makefile and Kconfig files required for building an AArch64 kernel. Signed-off-by: NWill Deacon <will.deacon@arm.com> Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com> Acked-by: NTony Lindgren <tony@atomide.com> Acked-by: NNicolas Pitre <nico@linaro.org> Acked-by: NOlof Johansson <olof@lixom.net> Acked-by: NSantosh Shilimkar <santosh.shilimkar@ti.com> Acked-by: NArnd Bergmann <arnd@arndb.de>
-
- 13 9月, 2012 1 次提交
-
-
由 Dmitry Kasatkin 提交于
When pkcs_1_v1_5_decode_emsa() returns without error and hash sizes do not match, hash comparision is not done and digsig_verify_rsa() returns no error. This is a bug and this patch fixes it. The bug was introduced in v3.3 by commit b35e286a ("lib/digsig: pkcs_1_v1_5_decode_emsa cleanup"). Cc: stable@vger.kernel.org Signed-off-by: NDmitry Kasatkin <dmitry.kasatkin@intel.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 11 9月, 2012 1 次提交
-
-
The kernel's version number is used as decimal in the bcdDevice field of the RH descriptor. For kernel version v3.12 we would see 3.0c in lsusb. I am not sure how important it is to stick with bcd values since this is this way since we started git history and nobody complained (however back then we reported only 2.6). Signed-off-by: NSebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
- 09 9月, 2012 2 次提交
-
-
由 Pablo Neira Ayuso 提交于
This patch defines netlink_kernel_create as a wrapper function of __netlink_kernel_create to hide the struct module *me parameter (which seems to be THIS_MODULE in all existing netlink subsystems). Suggested by David S. Miller. Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Pablo Neira Ayuso 提交于
Replace netlink_set_nonroot by one new field `flags' in struct netlink_kernel_cfg that is passed to netlink_kernel_create. This patch also renames NL_NONROOT_* to NL_CFG_F_NONROOT_* since now the flags field in nl_table is generic (so we can add more flags if needed in the future). Also adjust all callers in the net-next tree to use these flags instead of netlink_set_nonroot. Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 31 8月, 2012 1 次提交
-
-
由 Julian Anastasov 提交于
Signed-off-by: NJulian Anastasov <ja@ssi.bg> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 22 8月, 2012 1 次提交
-
-
由 Konrad Rzeszutek Wilk 提交于
This enables the caller to initialize swiotlb with its own iotlb memory late in the bootup. See git commit eb605a57 "swiotlb: add swiotlb_tbl_map_single library function" which will explain the full details of what it can be used for. CC: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> [v1: Fold in smatch warning] Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>
-
- 31 7月, 2012 15 次提交
-
-
由 Al Viro 提交于
... making percpu_counter_destroy() non-blocking Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Mandeep Singh Baines 提交于
We are seeing a lot of sg_alloc_table allocation failures using the new drm prime infrastructure. We isolated the cause to code in __sg_alloc_table that was re-writing the gfp_flags. There is a comment in the code that suggest that there is an assumption about the allocation coming from a memory pool. This was likely true when sg lists were primarily used for disk I/O. Signed-off-by: NMandeep Singh Baines <msb@chromium.org> Cc: Jens Axboe <axboe@kernel.dk> Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: Cong Wang <amwang@redhat.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Rob Clark <rob.clark@linaro.org> Cc: Sumit Semwal <sumit.semwal@linaro.org> Cc: Inki Dae <inki.dae@samsung.com> Cc: Dave Airlie <airlied@redhat.com> Cc: Sonny Rao <sonnyrao@chromium.org> Cc: Olof Johansson <olofj@chromium.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Akinobu Mita 提交于
This provides the ability to inject artifical errors to pSeries reconfig notifier chain callbacks. It is controlled through debugfs interface under /sys/kernel/debug/notifier-error-inject/pSeries-reconfig If the notifier call chain should be failed with some events notified, write the error code to "actions/<notifier event>/error". Signed-off-by: NAkinobu Mita <akinobu.mita@gmail.com> Cc: Pavel Machek <pavel@ucw.cz> Cc: "Rafael J. Wysocki" <rjw@sisk.pl> Cc: Greg KH <greg@kroah.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Michael Ellerman <michael@ellerman.id.au> Cc: Dave Jones <davej@redhat.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Akinobu Mita 提交于
This provides the ability to inject artifical errors to memory hotplug notifier chain callbacks. It is controlled through debugfs interface under /sys/kernel/debug/notifier-error-inject/memory If the notifier call chain should be failed with some events notified, write the error code to "actions/<notifier event>/error". Example: Inject memory hotplug offline error (-12 == -ENOMEM) # cd /sys/kernel/debug/notifier-error-inject/memory # echo -12 > actions/MEM_GOING_OFFLINE/error # echo offline > /sys/devices/system/memory/memoryXXX/state bash: echo: write error: Cannot allocate memory Signed-off-by: NAkinobu Mita <akinobu.mita@gmail.com> Cc: Pavel Machek <pavel@ucw.cz> Cc: "Rafael J. Wysocki" <rjw@sisk.pl> Cc: Greg KH <greg@kroah.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Michael Ellerman <michael@ellerman.id.au> Cc: Dave Jones <davej@redhat.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Akinobu Mita 提交于
This provides the ability to inject artifical errors to PM notifier chain callbacks. It is controlled through debugfs interface under /sys/kernel/debug/notifier-error-inject/pm Each of the files in "error" directory represents an event which can be failed and contains the error code. If the notifier call chain should be failed with some events notified, write the error code to the files. If the notifier call chain should be failed with some events notified, write the error code to "actions/<notifier event>/error". Example: Inject PM suspend error (-12 = -ENOMEM) # cd /sys/kernel/debug/notifier-error-inject/pm # echo -12 > actions/PM_SUSPEND_PREPARE/error # echo mem > /sys/power/state bash: echo: write error: Cannot allocate memory Signed-off-by: NAkinobu Mita <akinobu.mita@gmail.com> Acked-by: N"Rafael J. Wysocki" <rjw@sisk.pl> Cc: Pavel Machek <pavel@ucw.cz> Cc: Greg KH <greg@kroah.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Michael Ellerman <michael@ellerman.id.au> Cc: Dave Jones <davej@redhat.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Akinobu Mita 提交于
Rewrite existing cpu-notifier-error-inject module to use debugfs based new framework. This change removes cpu_up_prepare_error and cpu_down_prepare_error module parameters which were used to specify error code to be injected. We could keep these module parameters for backward compatibility by module_param_cb but it seems overkill for this module. This provides the ability to inject artifical errors to CPU notifier chain callbacks. It is controlled through debugfs interface under /sys/kernel/debug/notifier-error-inject/cpu If the notifier call chain should be failed with some events notified, write the error code to "actions/<notifier event>/error". Example1: inject CPU offline error (-1 == -EPERM) # cd /sys/kernel/debug/notifier-error-inject/cpu # echo -1 > actions/CPU_DOWN_PREPARE/error # echo 0 > /sys/devices/system/cpu/cpu1/online bash: echo: write error: Operation not permitted Example2: inject CPU online error (-2 == -ENOENT) # cd /sys/kernel/debug/notifier-error-inject/cpu # echo -2 > actions/CPU_UP_PREPARE/error # echo 1 > /sys/devices/system/cpu/cpu1/online bash: echo: write error: No such file or directory Signed-off-by: NAkinobu Mita <akinobu.mita@gmail.com> Cc: Pavel Machek <pavel@ucw.cz> Cc: "Rafael J. Wysocki" <rjw@sisk.pl> Cc: Greg KH <greg@kroah.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Michael Ellerman <michael@ellerman.id.au> Cc: Dave Jones <davej@redhat.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Akinobu Mita 提交于
This patchset provides kernel modules that can be used to test the error handling of notifier call chain failures by injecting artifical errors to the following notifier chain callbacks. * CPU notifier * PM notifier * memory hotplug notifier * powerpc pSeries reconfig notifier Example: Inject CPU offline error (-1 == -EPERM) # cd /sys/kernel/debug/notifier-error-inject/cpu # echo -1 > actions/CPU_DOWN_PREPARE/error # echo 0 > /sys/devices/system/cpu/cpu1/online bash: echo: write error: Operation not permitted The patchset also adds cpu and memory hotplug tests to tools/testing/selftests These tests first do simple online and offline test and then do fault injection tests if notifier error injection module is available. This patch: The notifier error injection provides the ability to inject artifical errors to specified notifier chain callbacks. It is useful to test the error handling of notifier call chain failures. This adds common basic functions to define which type of events can be fail and to initialize the debugfs interface to control what error code should be returned and which event should be failed. Signed-off-by: NAkinobu Mita <akinobu.mita@gmail.com> Cc: Pavel Machek <pavel@ucw.cz> Cc: "Rafael J. Wysocki" <rjw@sisk.pl> Cc: Greg KH <greg@kroah.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Michael Ellerman <michael@ellerman.id.au> Cc: Dave Jones <davej@redhat.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Thiago Rafael Becker 提交于
Variables t4, t5, t6 and t7 are only used when CRC_LE_BITS != 32. Fix the following compilation warnings: lib/crc32.c: In function 'crc32_body': lib/crc32.c:77:55: warning: unused variable 't7' lib/crc32.c:77:41: warning: unused variable 't6' lib/crc32.c:77:27: warning: unused variable 't5' lib/crc32.c:77:13: warning: unused variable 't4' Signed-off-by: NThiago Rafael Becker <trbecker@trbecker.org> Cc: "Darrick J. Wong" <djwong@us.ibm.com> Cc: Bob Pearson <rpearson@systemfabricworks.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Stephen Boyd 提交于
If there are two spinlocks embedded in a structure that kallsyms knows about and one of the spinlocks locks up we will print the name of the containing structure instead of the address of the lock. This is quite bad, so let's use %pS instead of %ps so we get an offset in addition to the symbol so we can determine which particular lock is having problems. Signed-off-by: NStephen Boyd <sboyd@codeaurora.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Catalin Marinas 提交于
Introduce CONFIG_ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE and use this instead of the multitude of #if defined() checks in atomic64_test.c Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Akinobu Mita 提交于
memweight() is the function that counts the total number of bits set in memory area. Unlike bitmap_weight(), memweight() takes pointer and size in bytes to specify a memory area which does not need to be aligned to long-word boundary. [akpm@linux-foundation.org: rename `w' to `ret'] Signed-off-by: NAkinobu Mita <akinobu.mita@gmail.com> Cc: Anders Larsen <al@alarsen.net> Cc: Alasdair Kergon <agk@redhat.com> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: Mark Fasheh <mfasheh@suse.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Jan Kara <jack@suse.cz> Cc: Andreas Dilger <adilger.kernel@dilger.ca> Cc: "Theodore Ts'o" <tytso@mit.edu> Cc: Matthew Wilcox <matthew@wil.cx> Cc: Mauro Carvalho Chehab <mchehab@infradead.org> Cc: Tony Luck <tony.luck@gmail.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Andy Shevchenko 提交于
There are many places in the kernel where the drivers print small buffers as a hex string. This patch adds a support of the variable width buffer to print it as a hex string with a delimiter. The idea came from Pavel Roskin here: http://www.digipedia.pl/usenet/thread/18835/17449/ Sample output of pr_info("buf[%d:%d] %*phC\n", from, len, len, &buf[from]); could be look like this: [ 0.726130] buf[51:8] e8:16:b6:ef:e3:74:45:6e [ 0.750736] buf[59:15] 31:81:b8:3f:35:49:06:ae:df:32:06:05:4a:af:55 [ 0.757602] buf[17:5] ac:16:d5:2c:ef Signed-off-by: NAndy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Joe Perches <joe@perches.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Dan Rosenberg 提交于
When using ALT+SysRq+Q all the pointers are replaced with "pK-error" like this: [23153.208033] .base: pK-error with echo h > /proc/sysrq-trigger it works: [23107.776363] .base: ffff88023e60d540 The intent behind this behavior was to return "pK-error" in cases where the %pK format specifier was used in interrupt context, because the CAP_SYSLOG check wouldn't be meaningful. Clearly this should only apply when kptr_restrict is actually enabled though. Reported-by: NStevie Trujillo <stevie.trujillo@gmail.com> Signed-off-by: NDan Rosenberg <dan.j.rosenberg@gmail.com> Cc: <stable@vger.kernel.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Andrew Morton 提交于
Cc: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Andrei Emeltchenko 提交于
Bluetooth uses mostly LE byte order which is reversed for visual interpretation. Currently in Bluetooth in use unsafe batostr function. This is a slightly modified version of Joe's patch (sent Sat, Dec 4, 2010). Signed-off-by: NAndrei Emeltchenko <andrei.emeltchenko@intel.com> Cc: Joe Perches <joe@perches.com> Cc: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 30 7月, 2012 1 次提交
-
-
由 Tomasz Stanislawski 提交于
This patch adds a new constructor for an sg table. The table is constructed from an array of struct pages. All contiguous chunks of the pages are merged into a single sg nodes. A user may provide an offset and a size of a buffer if the buffer is not page-aligned. The function is dedicated for DMABUF exporters which often perform conversion from an page array to a scatterlist. Moreover the scatterlist should be squashed in order to save memory and to speed-up the process of DMA mapping using dma_map_sg. The code is based on the patch 'v4l: vb2-dma-contig: add support for scatterlist in userptr mode' and hints from Laurent Pinchart. Signed-off-by: NTomasz Stanislawski <t.stanislaws@samsung.com> Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com> Acked-by: NDaniel Vetter <daniel.vetter@ffwll.ch> Acked-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: NMarek Szyprowski <m.szyprowski@samsung.com> CC: Andrew Morton <akpm@linux-foundation.org>
-
- 23 7月, 2012 1 次提交
-
-
由 David Daney 提交于
libfdt is part of the device tree support in scripts/dtc/libfdt. For some platforms that use the Device Tree, we want to be able to edit the flattened device tree form. We don't want to burden kernel builds that do not require it, so we gate compilation of libfdt files with CONFIG_LIBFDT. So if it is needed, you need to do this in your Kconfig: select LIBFDT And in the Makefile of the code using libfdt something like: ccflags-y := -I$(src)/../../../scripts/dtc/libfdt Signed-off-by: NDavid Daney <david.daney@cavium.com> Cc: linux-mips@linux-mips.org Cc: devicetree-discuss@lists.ozlabs.org Cc: Grant Likely <grant.likely@secretlab.ca> Cc: linux-kernel@vger.kernel.org Acked-by: NRob Herring <rob.herring@calxeda.com> Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
- 20 7月, 2012 1 次提交
-
-
由 Tony Luck 提交于
The stack_not_used() function in <linux/sched.h> assumes that stacks grow downwards. This is not true on IA64 or PARISC, so this function would walk off in the wrong direction and into the weeds. Found on IA64 because of a compilation failure with recursive dependencies on IA64_TASKSIZE and IA64_THREAD_INFO_SIZE. Fixing the code is possible, but should be combined with other infrastructure additions to set up the "canary" at the end of the stack. Reported-by: Fengguang Wu <fengguang.wu@intel.com> (failed allmodconfig build) Signed-off-by: NTony Luck <tony.luck@intel.com>
-
- 06 7月, 2012 1 次提交
-
-
由 Paul E. McKenney 提交于
Although the C language allows you to break strings across lines, doing this makes it hard for people to find the Linux kernel code corresponding to a given console message. This commit therefore fixes broken strings throughout RCU's source code. Suggested-by: NJosh Triplett <josh@joshtriplett.org> Suggested-by: NIngo Molnar <mingo@kernel.org> Signed-off-by: NPaul E. McKenney <paulmck@linux.vnet.ibm.com>
-
- 02 7月, 2012 1 次提交
-
-
由 Dan Carpenter 提交于
Even though it has "bool" in the name, you have pass a u32 pointer to debugfs_create_bool(). Otherwise you get memory corruption in write_file_bool(). Fortunately in this case the corruption happens in an alignment hole between variables so it doesn't cause any problems. Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com> Signed-off-by: NJoerg Roedel <joerg.roedel@amd.com>
-
- 30 6月, 2012 1 次提交
-
-
由 Pablo Neira Ayuso 提交于
This patch adds the following structure: struct netlink_kernel_cfg { unsigned int groups; void (*input)(struct sk_buff *skb); struct mutex *cb_mutex; }; That can be passed to netlink_kernel_create to set optional configurations for netlink kernel sockets. I've populated this structure by looking for NULL and zero parameters at the existing code. The remaining parameters that always need to be set are still left in the original interface. That includes optional parameters for the netlink socket creation. This allows easy extensibility of this interface in the future. This patch also adapts all callers to use this new interface. Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 28 6月, 2012 1 次提交
-
-
由 Akinobu Mita 提交于
Signed-off-by: NAkinobu Mita <akinobu.mita@gmail.com> Cc: Jiri Kosina <trivial@kernel.org> Signed-off-by: NJiri Kosina <jkosina@suse.cz>
-
- 21 6月, 2012 1 次提交
-
-
由 Anton Blanchard 提交于
After enabling CONFIG_FAILSLAB I noticed random32 in profiles even if slub fault injection wasn't enabled at runtime. should_fail forces a comparison against random32() even if probability is 0: if (attr->probability <= random32() % 100) return false; Add a check up front for probability == 0 and avoid all of the more complicated checks. Signed-off-by: NAnton Blanchard <anton@samba.org> Acked-by: NAkinobu Mita <akinobu.mita@gmail.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 09 6月, 2012 2 次提交
-
-
由 Jan Kara 提交于
When percpu counter function in fprop_new_period() is interrupted by an interrupt while holding counter lock, it can cause deadlock when the interrupt wants to take the lock as well. Fix the problem by disabling interrupts when calling percpu counter functions. Signed-off-by: NJan Kara <jack@suse.cz> Signed-off-by: NFengguang Wu <fengguang.wu@intel.com>
-
由 Jan Kara 提交于
Implement code computing proportions of events of different type (like code in lib/proportions.c) but allowing periods to have different lengths. This allows us to have aging periods of fixed wallclock time which gives better proportion estimates given the hugely varying throughput of different devices - previous measuring of aging period by number of events has the problem that a reasonable period length for a system with low-end USB stick is not a reasonable period length for a system with high-end storage array resulting either in too slow proportion updates or too fluctuating proportion updates. Acked-by: NPeter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: NJan Kara <jack@suse.cz> Signed-off-by: NFengguang Wu <fengguang.wu@intel.com>
-
- 08 6月, 2012 1 次提交
-
-
由 Joern Engel 提交于
Storing NULL values in the btree is illegal and can lead to memory corruption and possible other fun as well. Catch it on insert, instead of waiting for the inevitable. Signed-off-by: NJoern Engel <joern@logfs.org> Signed-off-by: NRoland Dreier <roland@purestorage.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-