Currently, a number of structure and function definitions related
to the broadcast functionality are unnecessarily exposed in the file
bcast.h. This obscures the fact that the external interface towards
the broadcast link in fact is very narrow, and causes unnecessary
recompilations of other files when anything changes in those
definitions.

In this commit, we move as many of those definitions as is currently
possible to the file bcast.c.

We also rename the structure 'tipc_bclink' to 'tipc_bc_base', both
since the name does not correctly describe the contents of this
struct, and will do so even less in the future, and because we want
to use the term 'link' more appropriately in the functionality
introduced later in this series.

Finally, we rename a couple of functions, such as tipc_bclink_xmit()
and others that will be kept in the future, to include the term 'bcast'
instead.

There are no functional changes in this commit.
Signed-off-by: NJon Maloy <jon.maloy@ericsson.com>
Reviewed-by: NYing Xue <ying.xue@windriver.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Conflicts:
	net/ipv6/xfrm6_output.c
	net/openvswitch/flow_netlink.c
	net/openvswitch/vport-gre.c
	net/openvswitch/vport-vxlan.c
	net/openvswitch/vport.c
	net/openvswitch/vport.h

The openvswitch conflicts were overlapping changes.  One was
the egress tunnel info fix in 'net' and the other was the
vport ->send() op simplification in 'net-next'.

The xfrm6_output.c conflicts was also a simplification
overlapping a bug fix.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Merge branch 'for-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next

Johan Hedberg says:

====================
pull request: bluetooth-next 2015-10-22

Here's probably the last bluetooth-next pull request for 4.4. Among
several other changes it contains the rest of the fixes & cleanups from
the Bluetooth UnplugFest (that didn't need to be hurried to 4.3).

 - Refactoring & cleanups to 6lowpan code
 - New USB ids for two Atheros controllers and BCM43142A0 from Broadcom
 - Fix (quirk) for broken Broadcom BCM2045 controllers
 - Support for latest Apple controllers
 - Improvements to the vendor diagnostic message support

Please let me know if there are any issues pulling. Thanks.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

struct bnxt_pf_info needs to be always defined.  Move bnxt_update_vf_mac()
to bnxt_sriov.c and add some missing #ifdef CONFIG_BNXT_SRIOV.
Reported-by: NJim Hull <jim.hull@hpe.com>
Tested-by: NJim Hull <jim.hull@hpe.com>
Signed-off-by: NMichael Chan <mchan@broadcom.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Jeff Kirsher says:

====================
Intel Wired LAN Driver Updates 2015-10-23

This series contains updates to i40e, i40evf, if_link, ixgbe and ixgbevf.

Anjali adds a workaround to drop any flow control frames from being
transmitted from any VSI, so that a malicious VF cannot send flow control
or PFC packets out on the wire.  Also fixed a bug in debugfs by grabbing
the filter list lock before adding or deleting a filter.

Akeem fixes an issue where we were unconditionally returning VEB bridge
mode before allowing LB in the add VSI routine, resolve by checking if
the bridge is actually in VEB mode first.

Mitch fixed an issue where the incorrect structure was being used for
VLAN filter list, which meant the VLAN filter list did not get
processed correctly and VLAN filters would not be re-enabled after any
kind of reset.

Helin fixed a problem of possibly getting inconsistent flow control
status after a PF reset.  The issue was requested_mode was being set
with a default value during probe, but the hardware state could be a
different value from this mode.

Carolyn fixed a problem where the driver output of the OEM version
string varied from the other tools.

Jean Sacren fixes up kernel documentation by fixing function header
comments to match actual variables used in the functions.  Also
cleaned up variable initialization, when the variable would be
over-written immediately.

Hiroshi Shimanoto provides three patches to add "trusted" VF by adding
netlink directives and an NDO entry.  Then implement these new controls
in ixgbe and ixgbevf.  This series has gone through several iterations
to address all the suggested community changes and concerns.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Roopa Prabhu says:

====================
mpls: multipath support

This patch adds support for MPLS multipath routes.

Includes following changes to support multipath:
- splits struct mpls_route into 'struct mpls_route + struct mpls_nh'.

- struct mpls_nh represents a mpls nexthop label forwarding entry

- Adds support to parse/fill RTA_MULTIPATH netlink attribute for
multipath routes similar to ipv4/v6 fib

- In the process of restructuring, this patch also consistently changes all
labels to u8

$ip -f mpls route add 100 nexthop as 200 via inet 10.1.1.2 dev swp1 \
		nexthop as 700 via inet 10.1.1.6 dev swp2 \
		nexthop as 800 via inet 40.1.1.2 dev swp3

$ip  -f mpls route show
100
	nexthop as to 200 via inet 10.1.1.2  dev swp1
	nexthop as to 700 via inet 10.1.1.6  dev swp2
	nexthop as to 800 via inet 40.1.1.2  dev swp3
====================
Signed-off-by: NRoopa Prabhu <roopa@cumulusnetworks.com>
Acked-by: NEric W. Biederman <ebiederm@xmission.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Change the selection of a multipath route to use a flow-based
hash. This more suitable for traffic sensitive to reordering within a
flow (e.g. TCP, L2VPN) and whilst still allowing a good distribution
of traffic given enough flows.

Selection of the path for a multipath route is done using a hash of:
1. Label stack up to MAX_MP_SELECT_LABELS labels or up to and
   including entropy label, whichever is first.
2. 3-tuple of (L3 src, L3 dst, proto) from IPv4/IPv6 header in MPLS
   payload, if present.

Naturally, a 5-tuple hash using L4 information in addition would be
possible and be better in some scenarios, but there is a tradeoff
between looking deeper into the packet to achieve good distribution,
and packet forwarding performance, and I have erred on the side of the
latter as the default.
Signed-off-by: NRobert Shearman <rshearma@brocade.com>
Signed-off-by: NRoopa Prabhu <roopa@cumulusnetworks.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch adds support for MPLS multipath routes.

Includes following changes to support multipath:
- splits struct mpls_route into 'struct mpls_route + struct mpls_nh'

- 'struct mpls_nh' represents a mpls nexthop label forwarding entry

- moves mpls route and nexthop structures into internal.h

- A mpls_route can point to multiple mpls_nh structs

- the nexthops are maintained as a array (similar to ipv4 fib)

- In the process of restructuring, this patch also consistently changes
  all labels to u8

- Adds support to parse/fill RTA_MULTIPATH netlink attribute for
multipath routes similar to ipv4/v6 fib

- In this patch, the multipath route nexthop selection algorithm
simply returns the first nexthop. It is replaced by a
hash based algorithm from Robert Shearman in the next patch

- mpls_route_update cleanup: remove 'dev' handling in mpls_route_update.
mpls_route_update though implemented to update based on dev, it was
never used that way. And the dev handling gets tricky with multiple
nexthops. Cannot match against any single nexthops dev. So, this patch
removes the unused 'dev' handling in mpls_route_update.

- dead route/path handling will be implemented in a subsequent patch

Example:

$ip -f mpls route add 100 nexthop as 200 via inet 10.1.1.2 dev swp1 \
                nexthop as 700 via inet 10.1.1.6 dev swp2 \
                nexthop as 800 via inet 40.1.1.2 dev swp3

$ip  -f mpls route show
100
        nexthop as to 200 via inet 10.1.1.2  dev swp1
        nexthop as to 700 via inet 10.1.1.6  dev swp2
        nexthop as to 800 via inet 40.1.1.2  dev swp3
Signed-off-by: NRoopa Prabhu <roopa@cumulusnetworks.com>
Acked-by: NRobert Shearman <rshearma@brocade.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

the returned buffer of register_sysctl() is stored into net_header
variable, but net_header is not used after, and compiler maybe
optimise the variable out, and lead kmemleak reported the below warning

	comm "swapper/0", pid 1, jiffies 4294937448 (age 267.270s)
	hex dump (first 32 bytes):
	90 38 8b 01 c0 ff ff ff 00 00 00 00 01 00 00 00 .8..............
	01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
	backtrace:
	[<ffffffc00020f134>] create_object+0x10c/0x2a0
	[<ffffffc00070ff44>] kmemleak_alloc+0x54/0xa0
	[<ffffffc0001fe378>] __kmalloc+0x1f8/0x4f8
	[<ffffffc00028e984>] __register_sysctl_table+0x64/0x5a0
	[<ffffffc00028eef0>] register_sysctl+0x30/0x40
	[<ffffffc00099c304>] net_sysctl_init+0x20/0x58
	[<ffffffc000994dd8>] sock_init+0x10/0xb0
	[<ffffffc0000842e0>] do_one_initcall+0x90/0x1b8
	[<ffffffc000966bac>] kernel_init_freeable+0x218/0x2f0
	[<ffffffc00070ed6c>] kernel_init+0x1c/0xe8
	[<ffffffc000083bfc>] ret_from_fork+0xc/0x50
	[<ffffffffffffffff>] 0xffffffffffffffff <<end check kmemleak>>

Before fix, the objdump result on ARM64:
0000000000000000 <net_sysctl_init>:
   0:   a9be7bfd        stp     x29, x30, [sp,#-32]!
   4:   90000001        adrp    x1, 0 <net_sysctl_init>
   8:   90000000        adrp    x0, 0 <net_sysctl_init>
   c:   910003fd        mov     x29, sp
  10:   91000021        add     x1, x1, #0x0
  14:   91000000        add     x0, x0, #0x0
  18:   a90153f3        stp     x19, x20, [sp,#16]
  1c:   12800174        mov     w20, #0xfffffff4                // #-12
  20:   94000000        bl      0 <register_sysctl>
  24:   b4000120        cbz     x0, 48 <net_sysctl_init+0x48>
  28:   90000013        adrp    x19, 0 <net_sysctl_init>
  2c:   91000273        add     x19, x19, #0x0
  30:   9101a260        add     x0, x19, #0x68
  34:   94000000        bl      0 <register_pernet_subsys>
  38:   2a0003f4        mov     w20, w0
  3c:   35000060        cbnz    w0, 48 <net_sysctl_init+0x48>
  40:   aa1303e0        mov     x0, x19
  44:   94000000        bl      0 <register_sysctl_root>
  48:   2a1403e0        mov     w0, w20
  4c:   a94153f3        ldp     x19, x20, [sp,#16]
  50:   a8c27bfd        ldp     x29, x30, [sp],#32
  54:   d65f03c0        ret
After:
0000000000000000 <net_sysctl_init>:
   0:   a9bd7bfd        stp     x29, x30, [sp,#-48]!
   4:   90000000        adrp    x0, 0 <net_sysctl_init>
   8:   910003fd        mov     x29, sp
   c:   a90153f3        stp     x19, x20, [sp,#16]
  10:   90000013        adrp    x19, 0 <net_sysctl_init>
  14:   91000000        add     x0, x0, #0x0
  18:   91000273        add     x19, x19, #0x0
  1c:   f90013f5        str     x21, [sp,#32]
  20:   aa1303e1        mov     x1, x19
  24:   12800175        mov     w21, #0xfffffff4                // #-12
  28:   94000000        bl      0 <register_sysctl>
  2c:   f9002260        str     x0, [x19,#64]
  30:   b40001a0        cbz     x0, 64 <net_sysctl_init+0x64>
  34:   90000014        adrp    x20, 0 <net_sysctl_init>
  38:   91000294        add     x20, x20, #0x0
  3c:   9101a280        add     x0, x20, #0x68
  40:   94000000        bl      0 <register_pernet_subsys>
  44:   2a0003f5        mov     w21, w0
  48:   35000080        cbnz    w0, 58 <net_sysctl_init+0x58>
  4c:   aa1403e0        mov     x0, x20
  50:   94000000        bl      0 <register_sysctl_root>
  54:   14000004        b       64 <net_sysctl_init+0x64>
  58:   f9402260        ldr     x0, [x19,#64]
  5c:   94000000        bl      0 <unregister_sysctl_table>
  60:   f900227f        str     xzr, [x19,#64]
  64:   2a1503e0        mov     w0, w21
  68:   f94013f5        ldr     x21, [sp,#32]
  6c:   a94153f3        ldp     x19, x20, [sp,#16]
  70:   a8c37bfd        ldp     x29, x30, [sp],#48
  74:   d65f03c0        ret

Add the possible error handle to free the net_header to remove the
kmemleak warning
Signed-off-by: NLi RongQing <roy.qing.li@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Neil Armstrong says:

====================
Refactor nested mdiobus read/write functions

In order to avoid locked signal false positive for nested mdiobus
read/write calls, nested code was introduced in mv88e6xxx and
mdio-mux.
But mv88e6060 also needs such nested mdiobus read/write calls.
For sake of refactoring, introduce nested variants of mdiobus read/write
and make them used by mv88e6xxx and mv88e6060.
In a next patch, mdio-mux should also use these variant calls.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Like mv88e6xxx and mdio-mux, to avoid lockdep give false positives
because of nested MDIO busses, switch to previously introduced
nested mdiobus_read/write variants.
Signed-off-by: NNeil Armstrong <narmstrong@baylibre.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Make the mv88e6xxx driver use the previously introduced nested
variants of mdiobus_read/write functions.
Signed-off-by: NNeil Armstrong <narmstrong@baylibre.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Since nested variants of mdiobus_read/write are used in multiple
drivers, add nested variants in the mdiobus core.
Suggested-by: NAndrew Lunn <andrew@lunn.ch>
Signed-off-by: NNeil Armstrong <narmstrong@baylibre.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The limitation of the number of multicast address for VF is not enough
for the large scale server with SR-IOV feature. IPv6 requires the multicast
MAC address for each IP address to handle the Neighbor Solicitation
message. We couldn't assign over 30 IPv6 addresses to a single VF.

This patch introduces the new mailbox API, IXGBE_VF_UPDATE_XCAST_MODE,
to update multicast mode of VF. This adds 3 modes;
  - NONE     only L2 exact match addresses or Flow Director enabled
  - MULTI    BAM and ROMPE set
  - ALLMULTI BAM, ROMPE and MPE set

If a guest VF user wants over 30 MAC multicast addresses, set IFF_ALLMULTI
to request PF to update xcast mode to enable VF multicast promiscuous mode.

On the other hand, enabling VF multicast promiscuous mode may affect
security and performance in the network of the NIC. Only trusted VF can
enable multicast promiscuous mode. The behavior of untrusted VF is the
same as previous version.
Signed-off-by: NHiroshi Shimamoto <h-shimamoto@ct.jp.nec.com>
Tested-by: NKrishneil Singh <Krishneil.k.singh@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>

Implements the new netdev op to trust VF in ixgbe.

The administrator can turn on and off VF trusted by ip command which
supports trust message.
 # ip link set dev eth0 vf 1 trust on
or
 # ip link set dev eth0 vf 1 trust off

Send a ping to reset VF on changing the status of trusting.
VF driver will reconfigure its features on reset.
Signed-off-by: NHiroshi Shimamoto <h-shimamoto@ct.jp.nec.com>
Tested-by: NKrishneil Singh <Krishneil.k.singh@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>

There is no reasons to probe cpsw from late_initcall level
and it's not recommended. Hence, use module_platform_driver()
to register and probe cpsw driver from module_init() level.

Cc: Tony Lindgren <tony@atomide.com>
Acked-by: NMugunthan V N <mugunthanvnm@ti.com>
Signed-off-by: NGrygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Add netlink directives and ndo entry to trust VF user.

This controls the special permission of VF user.
The administrator will dedicatedly trust VF user to use some features
which impacts security and/or performance.

The administrator never turn it on unless VF user is fully trusted.

CC: Sy Jong Choi <sy.jong.choi@intel.com>
Signed-off-by: NHiroshi Shimamoto <h-shimamoto@ct.jp.nec.com>
Acked-by: NGreg Rose <gregory.v.rose@intel.com>
Tested-by: NKrishneil Singh <Krishneil.k.singh@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>

Multiple cpus can process duplicates of incoming ACK messages
matching a SYN_RECV request socket. This is a rare event under
normal operations, but definitely can happen.

Only one must win the race, otherwise corruption would occur.

To fix this without adding new atomic ops, we use logic in
inet_ehash_nolisten() to detect the request was present in the same
ehash bucket where we try to insert the new child.

If request socket was not found, we have to undo the child creation.

This actually removes a spin_lock()/spin_unlock() pair in
reqsk_queue_unlink() for the fast path.

Fixes: e994b2f0 ("tcp: do not lock listener to process SYN packets")
Fixes: 079096f1 ("tcp/dccp: install syn_recv requests into ehash table")
Signed-off-by: NEric Dumazet <edumazet@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The commit 3092e5e4cc79 ("i40e: add little endian conversion for
checksum") fixed the checksum bug on big-endian architecture.

But we should not execute cpu_to_le16() unconditionally. Thus, put
cpu_to_le16() under certain condition.

Cc: Jesse Brandeburg <jesse.brandeburg@intel.com>
Cc: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: NJean Sacren <sakiwit@gmail.com>
Tested-by: NAndrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>

In both i40e_calc_nvm_checksum() and i40e_update_nvm_checksum(), the
local variables designated by 'ret_code' are overwritten immediately. As
such, they should merely be declared.
Signed-off-by: NJean Sacren <sakiwit@gmail.com>
Tested-by: NAndrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>

In i40evf_msix_aq(), the first two lines of rd32() are mainly to clear
the registers. If we initialize 'val' at this point, it will be
overwritten immediately. We shall simply discard the return value here.

When we initialize 'val', we might as well include the mask in one step.
Signed-off-by: NJean Sacren <sakiwit@gmail.com>
Tested-by: NAndrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>

The following kernel-doc arguments for their respective functions are
missing:

1) @cd_type_cmd_tso_mss for i40e_tso();
2) @cd_type_cmd_tso_mss for i40e_tsyn();
3) @tx_ring for i40e_tx_enable_csum().

Add them all for the kernel-doc requirement.
Signed-off-by: NJean Sacren <sakiwit@gmail.com>
Tested-by: NAndrew Bowers <andrewx.bowers@intel.com>
Acked-by: NJesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>

@flush has been missing since the inception of i40evf_irq_enable(). Add
it for the kernel doc.
Signed-off-by: NJean Sacren <sakiwit@gmail.com>
Tested-by: NAndrew Bowers <andrewx.bowers@intel.com>
Acked-by: NJesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>

Instead of using a custom approach change the code to use %*ph format
specifier.
Signed-off-by: NAndy Shevchenko <andriy.shevchenko@linux.intel.com>
Tested-by: NAndrew Bowers <andrewx.bowers@intel.com>
Acked-by: NJesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>

Bump up the version...

Change-ID: Ib8d501021671ba20250115ed54330e2c182255b7
Signed-off-by: NCatherine Sullivan <catherine.sullivan@intel.com>
Tested-by: NAndrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>

If a call to enable SR-IOV in the kernel failed, we need to disable
I40E_FLAG_VEB_MODE_ENABLED, so that bridge mode could fall back to
VEPA, which is a default.

Change-ID: I12b6f776769506db85b29bea94b9c88d0b5ee65e
Signed-off-by: NAkeem G Abodunrin <akeem.g.abodunrin@intel.com>
Tested-by: NAndrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>

This patch fixes a problem where the driver output of the OEM
version string varied from the other tools.  The mask value
and the order of operations were incorrect, per the original
change request.  Without this patch, the version string will
appear incorrect from the driver.

Change-ID: Ie1ca6485284b4ce3b57e5a99b18b7641617c7ef7
Signed-off-by: NCarolyn Wyborny <carolyn.wyborny@intel.com>
Tested-by: NAndrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>

This patch fixes a problem of possibly getting inconsistent flow control
statuses after a PF reset. Requested_mode was being set with a default
value during probing, but the initial HW state could be different from
this mode.

Change-ID: I772bf07b78616e87086418d4bd87954b66fa17cd
Signed-off-by: NHelin Zhang <helin.zhang@intel.com>
Tested-by: NAndrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>

Not sure how this compiles at all. Use the correct struct for
manipulating the VLAN filter list. Without this, the VLAN filter
list doesn't get processed correctly, and VLAN filters will not
be re-enabled after any kind of reset.

Change-ID: Iceff2dc089f303058fb71ecb08419eed471e0e90
Signed-off-by: NMitch Williams <mitch.a.williams@intel.com>
Tested-by: NAndrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>

Fix i40e_is_vsi_uplink_mode_veb to check if bridge is actually
in VEB mode before allowing LB in the add VSI routine, instead of
unconditionally returning VEB bridge mode.

Change-ID: I162397b1bdd02367735fe9baaeb51465be2a3ce9
Signed-off-by: NAkeem G Abodunrin <akeem.g.abodunrin@intel.com>
Tested-by: NAndrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>

The new code flow requires us to grab the filter list lock before
adding/deleting the filter.

Change-ID: I4eaef508ab4da2d1b2e23f20f2a78d931d5b6aeb
Signed-off-by: NAnjali Singhai Jain <anjali.singhai@intel.com>
Tested-by: NAndrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>

This patch adds a workaround to drop any flow control frames from being
transmitted from any VSI. FW can still send flow control frames if flow
control is enabled.

With this patch in place a malicious VF cannot send flow control or PFC
packets out on the wire.

Change-ID: I4303b24e98b93066d2767fec24dfe78be591c277
Signed-off-by: NAnjali Singhai Jain <anjali.singhai@intel.com>
Tested-by: NAndrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>

We can't rely on PPPOX_ZOMBIE to decide whether to clear po->pppoe_dev.
PPPOX_ZOMBIE can be set by pppoe_disc_rcv() even when po->pppoe_dev is
NULL. So we have no guarantee that (sk->sk_state & PPPOX_ZOMBIE) implies
(po->pppoe_dev != NULL).
Since we're releasing a PPPoE socket, we want to release the pppoe_dev
if it exists and reset sk_state to PPPOX_DEAD, no matter the previous
value of sk_state. So we can just check for po->pppoe_dev and avoid any
assumption on sk->sk_state.

Fixes: 2b018d57 ("pppoe: drop PPPOX_ZOMBIEs in pppoe_release")
Signed-off-by: NGuillaume Nault <g.nault@alphalink.fr>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NLi RongQing <roy.qing.li@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The code currently uses the lightweight dma_wmb barrier before updating
the current descriptor count. Under heavy load, the Tx cleanup routine
was seeing the updated current descriptor count before the updated
descriptor information. As a result, the Tx descriptor was being cleaned
up before it was used because it was not "owned" by the hardware yet,
resulting in a Tx queue hang.

Using the wmb barrier insures that the descriptor is updated before the
descriptor counter preventing the Tx queue hang. For extra insurance,
the Tx cleanup routine is changed to grab the current decriptor count on
entry and uses that initial value in the processing loop rather than
trying to chase the current value.
Signed-off-by: NTom Lendacky <thomas.lendacky@amd.com>
Tested-by: NChristoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Very rarely, the KSZ9031 will appear to complete autonegotiation, but
will drop all traffic afterwards.  When this happens, the idle error
count will read 0xFF after autonegotiation completes.  Reset the PHY
when in that state.
Signed-off-by: NNathan Sullivan <nathan.sullivan@ni.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Currently adding a new ipv4 address always cause the creation of the
related network route, with default metric. When a host has multiple
interfaces on the same network, multiple routes with the same metric
are created.

If the userspace wants to set specific metric on each routes, i.e.
giving better metric to ethernet links in respect to Wi-Fi ones,
the network routes must be deleted and recreated, which is error-prone.

This patch implements the support for IFA_F_NOPREFIXROUTE for ipv4
address. When an address is added with such flag set, no associated
network route is created, no network route is deleted when
said IP is gone and it's up to the user space manage such route.
Signed-off-by: NPaolo Abeni <pabeni@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Hannes Frederic Sowa says:

====================
overflow-arith: begin to add support for overflow builtins functions

I add a new header, linux/overflow-arith.h, as the central place to add
overflow and wrap-around checking functions. The reason I am doing so
is that it can make use of compiler supported builtin functions which
can leverage hardware.

As I need this for a fix in the ipv6 stack, which is also included in
this series, I propose to add it sooner than later over Davem's net
tree. This is also the reason why I start slowly with only the one
function I need at this time.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Raw sockets with hdrincl enabled can insert ipv6 extension headers
right into the data stream. In case we need to fragment those packets,
we reparse the options header to find the place where we can insert
the fragment header. If the extension headers exceed the link's MTU we
actually cannot make progress in such a case.

Instead of ending up in broken arithmetic or rounding towards 0 and
entering an endless loop in ip6_fragment, just prevent those cases by
aborting early and signal -EMSGSIZE to user space.
Reported-by: NDmitry Vyukov <dvyukov@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: NHannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The idea of the overflow-arith.h header is to collect overflow checking
functions in one central place.

If gcc compiler supports the __builtin_overflow_* builtins we use them
because they might give better performance, otherwise the code falls
back to normal overflow checking functions.

The builtin_overflow functions are supported by gcc-5 and clang. The
matter of supporting clang is to just provide a corresponding
CC_HAVE_BUILTIN_OVERFLOW, because the specific overflow checking builtins
don't differ between gcc and clang.

I just provide overflow_usub function here as I intend this to get merged
into net, more functions will definitely follow as they are needed.
Signed-off-by: NHannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>