This adds a helper check if a vq has been setup. The next patches
will use this when we move the vhost scsi cmd preallocation from per
session to per vq. In the per vq case, we only want to allocate cmds
for vqs that have actually been setup and not for all the possible
vqs.
Signed-off-by: NMike Christie <michael.christie@oracle.com>
Link: https://lore.kernel.org/r/1604986403-4931-2-git-send-email-michael.christie@oracle.comSigned-off-by: NMichael S. Tsirkin <mst@redhat.com>
Acked-by: NJason Wang <jasowang@redhat.com>
Acked-by: NStefan Hajnoczi <stefanha@redhat.com>

   ERROR: modpost: "mac_pton" [drivers/vdpa/vdpa_sim/vdpa_sim.ko] undefined!

mac_pton() is defined in lib/net_utils.c and is not built if NET is not set.

Select GENERIC_NET_UTILS as vdpasim doesn't depend on NET.
Reported-by: Nkernel test robot <lkp@intel.com>
Signed-off-by: NLaurent Vivier <lvivier@redhat.com>
Link: https://lore.kernel.org/r/20201113155706.599434-1-lvivier@redhat.comSigned-off-by: NMichael S. Tsirkin <mst@redhat.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org> # build-tested

Add macaddr parameter to the module to set the MAC address to use
Signed-off-by: NLaurent Vivier <lvivier@redhat.com>
Link: https://lore.kernel.org/r/20201029122050.776445-3-lvivier@redhat.comSigned-off-by: NMichael S. Tsirkin <mst@redhat.com>
Acked-by: NJason Wang <jasowang@redhat.com>

vdpa_sim generates a ramdom MAC address but it is never used by upper
layers because the VIRTIO_NET_F_MAC bit is not set in the features list.

Because of that, virtio-net always regenerates a random MAC address each
time it is loaded whereas the address should only change on vdpa_sim
load/unload.

Fix that by adding VIRTIO_NET_F_MAC in the features list of vdpa_sim.

Fixes: 2c53d0f6 ("vdpasim: vDPA device simulator")
Cc: jasowang@redhat.com
Signed-off-by: NLaurent Vivier <lvivier@redhat.com>
Link: https://lore.kernel.org/r/20201029122050.776445-2-lvivier@redhat.comSigned-off-by: NMichael S. Tsirkin <mst@redhat.com>
Acked-by: NJason Wang <jasowang@redhat.com>

LKP considered variable 'ret' in vhost_vdpa_setup_vq_irq() as
a unused variable, so suggest we remove it. Actually it stores
return value of irq_bypass_register_producer(), but we did not
check it, we should handle the failure case.

This commit will print a message if irq bypass register producer
fail, in this case, vqs still remain functional.
Signed-off-by: NZhu Lingshan <lingshan.zhu@intel.com>
Reported-by: Nkernel test robot <lkp@intel.com>
Link: https://lore.kernel.org/r/20201023104046.404794-1-lingshan.zhu@intel.comSigned-off-by: NMichael S. Tsirkin <mst@redhat.com>
Acked-by: NJason Wang <jasowang@redhat.com>

Since commit f959dcd6
("dma-direct: Fix potential NULL pointer dereference")
an error is reported when we load vdpa_sim and virtio-vdpa:

[  129.351207] net eth0: Unexpected TXQ (0) queue failure: -12

It seems that dma_mask is not initialized.

This patch initializes dma_mask() and calls dma_set_mask_and_coherent()
to fix the problem.

Full log:

[  128.548628] ------------[ cut here ]------------
[  128.553268] WARNING: CPU: 23 PID: 1105 at kernel/dma/mapping.c:149 dma_map_page_attrs+0x14c/0x1d0
[  128.562139] Modules linked in: virtio_net net_failover failover virtio_vdpa vdpa_sim vringh vhost_iotlb vdpa xt_CHECKSUM xt_MASQUERADE xt_conntrack ipt_REJECT nf_reject_ipv4 nft_compat nft_counter nft_chain_nat nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 nf_tables nfnetlink tun bridge stp llc iscsi_tcp libiscsi_tcp libiscsi scsi_transport_iscsi rfkill intel_rapl_msr intel_rapl_common isst_if_common sunrpc skx_edac nfit libnvdimm x86_pkg_temp_thermal intel_powerclamp coretemp kvm_intel ipmi_ssif kvm mgag200 i2c_algo_bit irqbypass drm_kms_helper crct10dif_pclmul crc32_pclmul syscopyarea ghash_clmulni_intel iTCO_wdt sysfillrect iTCO_vendor_support sysimgblt rapl fb_sys_fops dcdbas intel_cstate drm acpi_ipmi ipmi_si mei_me dell_smbios intel_uncore ipmi_devintf mei i2c_i801 dell_wmi_descriptor wmi_bmof pcspkr lpc_ich i2c_smbus ipmi_msghandler acpi_power_meter ip_tables xfs libcrc32c sd_mod t10_pi sg ahci libahci libata megaraid_sas tg3 crc32c_intel wmi dm_mirror dm_region_hash dm_log
[  128.562188]  dm_mod
[  128.651334] CPU: 23 PID: 1105 Comm: NetworkManager Tainted: G S        I       5.10.0-rc1+ #59
[  128.659939] Hardware name: Dell Inc. PowerEdge R440/04JN2K, BIOS 2.8.1 06/30/2020
[  128.667419] RIP: 0010:dma_map_page_attrs+0x14c/0x1d0
[  128.672384] Code: 1c 25 28 00 00 00 0f 85 97 00 00 00 48 83 c4 10 5b 5d 41 5c 41 5d c3 4c 89 da eb d7 48 89 f2 48 2b 50 18 48 89 d0 eb 8d 0f 0b <0f> 0b 48 c7 c0 ff ff ff ff eb c3 48 89 d9 48 8b 40 40 e8 2d a0 aa
[  128.691131] RSP: 0018:ffffae0f0151f3c8 EFLAGS: 00010246
[  128.696357] RAX: ffffffffc06b7400 RBX: 00000000000005fa RCX: 0000000000000000
[  128.703488] RDX: 0000000000000040 RSI: ffffcee3c7861200 RDI: ffff9e2bc16cd000
[  128.710620] RBP: 0000000000000000 R08: 0000000000000002 R09: 0000000000000000
[  128.717754] R10: 0000000000000002 R11: 0000000000000000 R12: ffff9e472cb291f8
[  128.724886] R13: ffff9e2bc14da780 R14: ffff9e472bc20000 R15: ffff9e2bc1b14940
[  128.732020] FS:  00007f887bae23c0(0000) GS:ffff9e4ac01c0000(0000) knlGS:0000000000000000
[  128.740105] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  128.745852] CR2: 0000562bc09de998 CR3: 00000003c156c006 CR4: 00000000007706e0
[  128.752982] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[  128.760114] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[  128.767247] PKRU: 55555554
[  128.769961] Call Trace:
[  128.772418]  virtqueue_add+0x81e/0xb00
[  128.776176]  virtqueue_add_inbuf_ctx+0x26/0x30
[  128.780625]  try_fill_recv+0x3a2/0x6e0 [virtio_net]
[  128.785509]  virtnet_open+0xf9/0x180 [virtio_net]
[  128.790217]  __dev_open+0xe8/0x180
[  128.793620]  __dev_change_flags+0x1a7/0x210
[  128.797808]  dev_change_flags+0x21/0x60
[  128.801646]  do_setlink+0x328/0x10e0
[  128.805227]  ? __nla_validate_parse+0x121/0x180
[  128.809757]  ? __nla_parse+0x21/0x30
[  128.813338]  ? inet6_validate_link_af+0x5c/0xf0
[  128.817871]  ? cpumask_next+0x17/0x20
[  128.821535]  ? __snmp6_fill_stats64.isra.54+0x6b/0x110
[  128.826676]  ? __nla_validate_parse+0x47/0x180
[  128.831120]  __rtnl_newlink+0x541/0x8e0
[  128.834962]  ? __nla_reserve+0x38/0x50
[  128.838713]  ? security_sock_rcv_skb+0x2a/0x40
[  128.843158]  ? netlink_deliver_tap+0x2c/0x1e0
[  128.847518]  ? netlink_attachskb+0x1d8/0x220
[  128.851793]  ? skb_queue_tail+0x1b/0x50
[  128.855641]  ? fib6_clean_node+0x43/0x170
[  128.859652]  ? _cond_resched+0x15/0x30
[  128.863406]  ? kmem_cache_alloc_trace+0x3a3/0x420
[  128.868110]  rtnl_newlink+0x43/0x60
[  128.871602]  rtnetlink_rcv_msg+0x12c/0x380
[  128.875701]  ? rtnl_calcit.isra.39+0x110/0x110
[  128.880147]  netlink_rcv_skb+0x50/0x100
[  128.883987]  netlink_unicast+0x1a5/0x280
[  128.887913]  netlink_sendmsg+0x23d/0x470
[  128.891839]  sock_sendmsg+0x5b/0x60
[  128.895331]  ____sys_sendmsg+0x1ef/0x260
[  128.899255]  ? copy_msghdr_from_user+0x5c/0x90
[  128.903702]  ___sys_sendmsg+0x7c/0xc0
[  128.907369]  ? dev_forward_change+0x130/0x130
[  128.911731]  ? sysctl_head_finish.part.29+0x24/0x40
[  128.916616]  ? new_sync_write+0x11f/0x1b0
[  128.920628]  ? mntput_no_expire+0x47/0x240
[  128.924727]  __sys_sendmsg+0x57/0xa0
[  128.928309]  do_syscall_64+0x33/0x40
[  128.931887]  entry_SYSCALL_64_after_hwframe+0x44/0xa9
[  128.936937] RIP: 0033:0x7f88792e3857
[  128.940518] Code: c3 66 90 41 54 41 89 d4 55 48 89 f5 53 89 fb 48 83 ec 10 e8 0b ed ff ff 44 89 e2 48 89 ee 89 df 41 89 c0 b8 2e 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 35 44 89 c7 48 89 44 24 08 e8 44 ed ff ff 48
[  128.959263] RSP: 002b:00007ffdca60dea0 EFLAGS: 00000293 ORIG_RAX: 000000000000002e
[  128.966827] RAX: ffffffffffffffda RBX: 000000000000000c RCX: 00007f88792e3857
[  128.973960] RDX: 0000000000000000 RSI: 00007ffdca60def0 RDI: 000000000000000c
[  128.981095] RBP: 00007ffdca60def0 R08: 0000000000000000 R09: 0000000000000000
[  128.988224] R10: 0000000000000001 R11: 0000000000000293 R12: 0000000000000000
[  128.995357] R13: 0000000000000000 R14: 00007ffdca60e0a8 R15: 00007ffdca60e09c
[  129.002492] CPU: 23 PID: 1105 Comm: NetworkManager Tainted: G S        I       5.10.0-rc1+ #59
[  129.011093] Hardware name: Dell Inc. PowerEdge R440/04JN2K, BIOS 2.8.1 06/30/2020
[  129.018571] Call Trace:
[  129.021027]  dump_stack+0x57/0x6a
[  129.024346]  __warn.cold.14+0xe/0x3d
[  129.027925]  ? dma_map_page_attrs+0x14c/0x1d0
[  129.032283]  report_bug+0xbd/0xf0
[  129.035602]  handle_bug+0x44/0x80
[  129.038922]  exc_invalid_op+0x13/0x60
[  129.042589]  asm_exc_invalid_op+0x12/0x20
[  129.046602] RIP: 0010:dma_map_page_attrs+0x14c/0x1d0
[  129.051566] Code: 1c 25 28 00 00 00 0f 85 97 00 00 00 48 83 c4 10 5b 5d 41 5c 41 5d c3 4c 89 da eb d7 48 89 f2 48 2b 50 18 48 89 d0 eb 8d 0f 0b <0f> 0b 48 c7 c0 ff ff ff ff eb c3 48 89 d9 48 8b 40 40 e8 2d a0 aa
[  129.070311] RSP: 0018:ffffae0f0151f3c8 EFLAGS: 00010246
[  129.075536] RAX: ffffffffc06b7400 RBX: 00000000000005fa RCX: 0000000000000000
[  129.082669] RDX: 0000000000000040 RSI: ffffcee3c7861200 RDI: ffff9e2bc16cd000
[  129.089803] RBP: 0000000000000000 R08: 0000000000000002 R09: 0000000000000000
[  129.096936] R10: 0000000000000002 R11: 0000000000000000 R12: ffff9e472cb291f8
[  129.104068] R13: ffff9e2bc14da780 R14: ffff9e472bc20000 R15: ffff9e2bc1b14940
[  129.111200]  virtqueue_add+0x81e/0xb00
[  129.114952]  virtqueue_add_inbuf_ctx+0x26/0x30
[  129.119399]  try_fill_recv+0x3a2/0x6e0 [virtio_net]
[  129.124280]  virtnet_open+0xf9/0x180 [virtio_net]
[  129.128984]  __dev_open+0xe8/0x180
[  129.132390]  __dev_change_flags+0x1a7/0x210
[  129.136575]  dev_change_flags+0x21/0x60
[  129.140415]  do_setlink+0x328/0x10e0
[  129.143994]  ? __nla_validate_parse+0x121/0x180
[  129.148528]  ? __nla_parse+0x21/0x30
[  129.152107]  ? inet6_validate_link_af+0x5c/0xf0
[  129.156639]  ? cpumask_next+0x17/0x20
[  129.160306]  ? __snmp6_fill_stats64.isra.54+0x6b/0x110
[  129.165443]  ? __nla_validate_parse+0x47/0x180
[  129.169890]  __rtnl_newlink+0x541/0x8e0
[  129.173731]  ? __nla_reserve+0x38/0x50
[  129.177483]  ? security_sock_rcv_skb+0x2a/0x40
[  129.181928]  ? netlink_deliver_tap+0x2c/0x1e0
[  129.186286]  ? netlink_attachskb+0x1d8/0x220
[  129.190560]  ? skb_queue_tail+0x1b/0x50
[  129.194401]  ? fib6_clean_node+0x43/0x170
[  129.198411]  ? _cond_resched+0x15/0x30
[  129.202163]  ? kmem_cache_alloc_trace+0x3a3/0x420
[  129.206869]  rtnl_newlink+0x43/0x60
[  129.210361]  rtnetlink_rcv_msg+0x12c/0x380
[  129.214462]  ? rtnl_calcit.isra.39+0x110/0x110
[  129.218908]  netlink_rcv_skb+0x50/0x100
[  129.222747]  netlink_unicast+0x1a5/0x280
[  129.226672]  netlink_sendmsg+0x23d/0x470
[  129.230599]  sock_sendmsg+0x5b/0x60
[  129.234090]  ____sys_sendmsg+0x1ef/0x260
[  129.238015]  ? copy_msghdr_from_user+0x5c/0x90
[  129.242461]  ___sys_sendmsg+0x7c/0xc0
[  129.246128]  ? dev_forward_change+0x130/0x130
[  129.250487]  ? sysctl_head_finish.part.29+0x24/0x40
[  129.255368]  ? new_sync_write+0x11f/0x1b0
[  129.259381]  ? mntput_no_expire+0x47/0x240
[  129.263478]  __sys_sendmsg+0x57/0xa0
[  129.267058]  do_syscall_64+0x33/0x40
[  129.270639]  entry_SYSCALL_64_after_hwframe+0x44/0xa9
[  129.275689] RIP: 0033:0x7f88792e3857
[  129.279268] Code: c3 66 90 41 54 41 89 d4 55 48 89 f5 53 89 fb 48 83 ec 10 e8 0b ed ff ff 44 89 e2 48 89 ee 89 df 41 89 c0 b8 2e 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 35 44 89 c7 48 89 44 24 08 e8 44 ed ff ff 48
[  129.298015] RSP: 002b:00007ffdca60dea0 EFLAGS: 00000293 ORIG_RAX: 000000000000002e
[  129.305581] RAX: ffffffffffffffda RBX: 000000000000000c RCX: 00007f88792e3857
[  129.312712] RDX: 0000000000000000 RSI: 00007ffdca60def0 RDI: 000000000000000c
[  129.319846] RBP: 00007ffdca60def0 R08: 0000000000000000 R09: 0000000000000000
[  129.326978] R10: 0000000000000001 R11: 0000000000000293 R12: 0000000000000000
[  129.334109] R13: 0000000000000000 R14: 00007ffdca60e0a8 R15: 00007ffdca60e09c
[  129.341249] ---[ end trace c551e8028fbaf59d ]---
[  129.351207] net eth0: Unexpected TXQ (0) queue failure: -12
[  129.360445] net eth0: Unexpected TXQ (0) queue failure: -12
[  129.824428] net eth0: Unexpected TXQ (0) queue failure: -12

Fixes: 2c53d0f6 ("vdpasim: vDPA device simulator")
Signed-off-by: NLaurent Vivier <lvivier@redhat.com>
Link: https://lore.kernel.org/r/20201027175914.689278-1-lvivier@redhat.comSigned-off-by: NMichael S. Tsirkin <mst@redhat.com>
Cc: stable@vger.kernel.org
Acked-by: NJason Wang <jasowang@redhat.com>

This reverts commit 7ed9e3d9.

The patch creates a DoS risk since it can result in a high order memory
allocation.

Fixes: 7ed9e3d9 ("vhost-vdpa: fix page pinning leakage in error path")
Cc: stable@vger.kernel.org
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

Fix to return the variable "err" from the error handling case instead
of "ret".

Fixes: 94abbccd ("vdpa/mlx5: Add shared memory registration code")
Signed-off-by: NJing Xiangfeng <jingxiangfeng@huawei.com>
Link: https://lore.kernel.org/r/20201026070637.164321-1-jingxiangfeng@huawei.comSigned-off-by: NMichael S. Tsirkin <mst@redhat.com>
Acked-by: NEli Cohen <elic@nvidia.com>
Cc: stable@vger.kernel.org
Acked-by: NJason Wang <jasowang@redhat.com>

The copy_to/from_user() functions return the number of bytes which we
weren't able to copy but the ioctl should return -EFAULT if they fail.

Fixes: a127c5bb ("vhost-vdpa: fix backend feature ioctls")
Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com>
Link: https://lore.kernel.org/r/20201023120853.GI282278@mwandaSigned-off-by: NMichael S. Tsirkin <mst@redhat.com>
Cc: stable@vger.kernel.org
Acked-by: NJason Wang <jasowang@redhat.com>

This implements a sample get_iova_range() for the simulator which
advertise [0, ULLONG_MAX] as the valid range.
Signed-off-by: NJason Wang <jasowang@redhat.com>
Link: https://lore.kernel.org/r/20201023090043.14430-4-jasowang@redhat.comSigned-off-by: NMichael S. Tsirkin <mst@redhat.com>

This patch introduces a new ioctl for vhost-vdpa device that can
report the iova range by the device.

For device that implements get_iova_range() method, we fetch it from
the vDPA device. If device doesn't implement get_iova_range() but
depends on platform IOMMU, we will query via DOMAIN_ATTR_GEOMETRY,
otherwise [0, ULLONG_MAX] is assumed.

For safety, this patch also rules out the map request which is not in
the valid range.
Signed-off-by: NJason Wang <jasowang@redhat.com>
Link: https://lore.kernel.org/r/20201023090043.14430-3-jasowang@redhat.comSigned-off-by: NMichael S. Tsirkin <mst@redhat.com>

This commit removed unnecessary spin_locks in vhost_vring_call
and related operations. Because we manipulate irq offloading
contents in vhost_vdpa ioctl code path which is already
protected by dev mutex and vq mutex.
Signed-off-by: NZhu Lingshan <lingshan.zhu@intel.com>
Link: https://lore.kernel.org/r/20200909065234.3313-1-lingshan.zhu@intel.comSigned-off-by: NMichael S. Tsirkin <mst@redhat.com>
Acked-by: NJason Wang <jasowang@redhat.com>

If riov and wiov are both defined and they point to different
objects, only riov is initialized. If the wiov is not initialized
by the caller, the function fails returning -EINVAL and printing
"Readable desc 0x... after writable" error message.

This issue happens when descriptors have both readable and writable
buffers (eg. virtio-blk devices has virtio_blk_outhdr in the readable
buffer and status as last byte of writable buffer) and we call
__vringh_iov() to get both type of buffers in two different iovecs.

Let's replace the 'else if' clause with 'if' to initialize both
riov and wiov if they are not NULL.

As checkpatch pointed out, we also avoid crashing the kernel
when riov and wiov are both NULL, replacing BUG() with WARN_ON()
and returning -EINVAL.

Fixes: f87d0fbb ("vringh: host-side implementation of virtio rings.")
Cc: stable@vger.kernel.org
Signed-off-by: NStefano Garzarella <sgarzare@redhat.com>
Link: https://lore.kernel.org/r/20201008204256.162292-1-sgarzare@redhat.comSigned-off-by: NMichael S. Tsirkin <mst@redhat.com>

set_map() is used by mlx5 vdpa to create a memory region based on the
address map passed by the iotlb argument. If we get successive calls, we
will destroy the current memory region and build another one based on
the new address mapping. We also need to setup the hardware resources
since they depend on the memory region.

If these calls happen before DRIVER_OK, It means that driver VQs may
also not been setup and we may not create them yet. In this case we want
to avoid setting up the other resources and defer this till we get
DRIVER OK.

Fixes: 1a86b377 ("vdpa/mlx5: Add VDPA driver for supported mlx5 devices")
Signed-off-by: NEli Cohen <elic@nvidia.com>
Link: https://lore.kernel.org/r/20200908123346.GA169007@mtl-vdi-166.wap.labs.mlnxSigned-off-by: NMichael S. Tsirkin <mst@redhat.com>

An architecture may restrict host access to guest memory,
e.g. IBM s390 Secure Execution or AMD SEV.

Provide a new Kconfig entry the architecture can select,
CONFIG_ARCH_HAS_RESTRICTED_VIRTIO_MEMORY_ACCESS, when it provides
the arch_has_restricted_virtio_memory_access callback to advertise
to VIRTIO common code when the architecture restricts memory access
from the host.

The common code can then fail the probe for any device where
VIRTIO_F_ACCESS_PLATFORM is required, but not set.
Signed-off-by: NPierre Morel <pmorel@linux.ibm.com>
Reviewed-by: NCornelia Huck <cohuck@redhat.com>
Reviewed-by: NHalil Pasic <pasic@linux.ibm.com>
Link: https://lore.kernel.org/r/1599728030-17085-2-git-send-email-pmorel@linux.ibm.comSigned-off-by: NMichael S. Tsirkin <mst@redhat.com>
Acked-by: NChristian Borntraeger <borntraeger@de.ibm.com>

linux/kernel.h is included more than once, Remove the one that isn't
necessary.
Signed-off-by: NTian Tao <tiantao6@hisilicon.com>
Link: https://lore.kernel.org/r/1600131102-24672-1-git-send-email-tiantao6@hisilicon.comSigned-off-by: NMichael S. Tsirkin <mst@redhat.com>
Acked-by: NJason Wang <jasowang@redhat.com>

Fix the warning: [-Werror=-Wframe-larger-than=]

drivers/vhost/vhost.c: In function log_used:
drivers/vhost/vhost.c:1906:1:
warning: the frame size of 1040 bytes is larger than 1024 bytes
Signed-off-by: NLi Wang <li.wang@windriver.com>
Link: https://lore.kernel.org/r/1600106889-25013-1-git-send-email-li.wang@windriver.comSigned-off-by: NMichael S. Tsirkin <mst@redhat.com>
Acked-by: NJason Wang <jasowang@redhat.com>

mem_id_table is not modified, so make it const to allow the compiler to
put it in read-only memory.
Signed-off-by: NRikard Falkeborn <rikard.falkeborn@gmail.com>
Link: https://lore.kernel.org/r/20200911203509.26505-4-rikard.falkeborn@gmail.comSigned-off-by: NMichael S. Tsirkin <mst@redhat.com>
Acked-by: NDavid Hildenbrand <david@redhat.com>

id_table is not modified, so make it const to allow the compiler to put
it in read-only memory.
Signed-off-by: NRikard Falkeborn <rikard.falkeborn@gmail.com>
Link: https://lore.kernel.org/r/20200911203509.26505-3-rikard.falkeborn@gmail.comSigned-off-by: NMichael S. Tsirkin <mst@redhat.com>
Reviewed-by: NDavid Hildenbrand <david@redhat.com>

id_table is not modified, so make it const to allow the compiler to put
it in read-only memory.
Signed-off-by: NRikard Falkeborn <rikard.falkeborn@gmail.com>
Link: https://lore.kernel.org/r/20200911203509.26505-2-rikard.falkeborn@gmail.comSigned-off-by: NMichael S. Tsirkin <mst@redhat.com>
Acked-by: NDavid Hildenbrand <david@redhat.com>

Set VIRTIO_NET_S_LINK_UP in config status to allow the get the bring the
net device's link up.

Fixes: 1a86b377 ("vdpa/mlx5: Add VDPA driver for supported mlx5 devices")
Signed-off-by: NEli Cohen <elic@nvidia.com>
Link: https://lore.kernel.org/r/20200917121540.GA98184@mtl-vdi-166.wap.labs.mlnxSigned-off-by: NMichael S. Tsirkin <mst@redhat.com>
Acked-by: NJason Wang <jasowang@redhat.com>

Introduce a dedicated function to be used for setting 16 bit fields per
virio endianness requirements and use it to set the mtu field.
Signed-off-by: NEli Cohen <elic@nvidia.com>
Link: https://lore.kernel.org/r/20200917121425.GA98139@mtl-vdi-166.wap.labs.mlnxSigned-off-by: NMichael S. Tsirkin <mst@redhat.com>
Acked-by: NJason Wang <jasowang@redhat.com>

When the NACK and BUS error bits are set by the hardware, the driver is
responsible for clearing them by writing "1" into the corresponding
status registers.

Hence perform the necessary operations in owl_i2c_interrupt().

Fixes: d211e62a ("i2c: Add Actions Semiconductor Owl family S900 I2C driver")
Reported-by: NManivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: NCristian Ciocaltea <cristian.ciocaltea@gmail.com>
Signed-off-by: NWolfram Sang <wsa@kernel.org>

This reverts commit fa4d3055. An updated
version was sent. So, revert this version and give the new version more
time for testing.
Signed-off-by: NWolfram Sang <wsa@kernel.org>

In mmc_queue_setup_discard() the mmc driver queue's discard_granularity
might be set as 0 (when card->pref_erase > max_discard) while the mmc
device still declares to support discard operation. This is buggy and
triggered the following kernel warning message,

WARNING: CPU: 0 PID: 135 at __blkdev_issue_discard+0x200/0x294
CPU: 0 PID: 135 Comm: f2fs_discard-17 Not tainted 5.9.0-rc6 #1
Hardware name: Google Kevin (DT)
pstate: 00000005 (nzcv daif -PAN -UAO BTYPE=--)
pc : __blkdev_issue_discard+0x200/0x294
lr : __blkdev_issue_discard+0x54/0x294
sp : ffff800011dd3b10
x29: ffff800011dd3b10 x28: 0000000000000000 x27: ffff800011dd3cc4 x26: ffff800011dd3e18 x25: 000000000004e69b x24: 0000000000000c40 x23: ffff0000f1deaaf0 x22: ffff0000f2849200 x21: 00000000002734d8 x20: 0000000000000008 x19: 0000000000000000 x18: 0000000000000000 x17: 0000000000000000 x16: 0000000000000000 x15: 0000000000000000 x14: 0000000000000394 x13: 0000000000000000 x12: 0000000000000000 x11: 0000000000000000 x10: 00000000000008b0 x9 : ffff800011dd3cb0 x8 : 000000000004e69b x7 : 0000000000000000 x6 : ffff0000f1926400 x5 : ffff0000f1940800 x4 : 0000000000000000 x3 : 0000000000000c40 x2 : 0000000000000008 x1 : 00000000002734d8 x0 : 0000000000000000 Call trace:
__blkdev_issue_discard+0x200/0x294
__submit_discard_cmd+0x128/0x374
__issue_discard_cmd_orderly+0x188/0x244
__issue_discard_cmd+0x2e8/0x33c
issue_discard_thread+0xe8/0x2f0
kthread+0x11c/0x120
ret_from_fork+0x10/0x1c
---[ end trace e4c8023d33dfe77a ]---

This patch fixes the issue by setting discard_granularity as SECTOR_SIZE
instead of 0 when (card->pref_erase > max_discard) is true. Now no more
complain from __blkdev_issue_discard() for the improper value of discard
granularity.

This issue is exposed after commit b35fd742 ("block: check queue's
limits.discard_granularity in __blkdev_issue_discard()"), a "Fixes:" tag
is also added for the commit to make sure people won't miss this patch
after applying the change of __blkdev_issue_discard().

Fixes: e056a1b5 ("mmc: queue: let host controllers specify maximum discard timeout")
Fixes: b35fd742 ("block: check queue's limits.discard_granularity in __blkdev_issue_discard()").
Reported-and-tested-by: NVicente Bergas <vicencb@gmail.com>
Signed-off-by: NColy Li <colyli@suse.de>
Acked-by: NAdrian Hunter <adrian.hunter@intel.com>
Cc: Ulf Hansson <ulf.hansson@linaro.org>
Link: https://lore.kernel.org/r/20201002013852.51968-1-colyli@suse.deSigned-off-by: NUlf Hansson <ulf.hansson@linaro.org>

Looks like the I2C tunnel implementation from Chromebook's
embedded controller does not handle PEC correctly. Fix this
by disabling PEC for batteries behind those I2C tunnels as
a workaround.

Note, that some Chromebooks actually have been reported to
have working PEC support (with I2C tunnel). Since the problem
has not yet been fully understood this simply reverts all
Chromebooks to not use PEC for now.
Reported-by: N"Milan P. Stanić" <mps@arvanta.net>
Reported-by: NVicente Bergas <vicencb@gmail.com>
CC: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Fixes: 7222bd60 ("power: supply: sbs-battery: add PEC support")
Tested-by: NVicente Bergas <vicencb@gmail.com>
Tested-by: N"Milan P. Stanić" <mps@arvanta.net>
Signed-off-by: NSebastian Reichel <sebastian.reichel@collabora.com>

[Why & How]
change abm config init interface to support multiple ABMs.
Signed-off-by: NYongqiang Sun <yongqiang.sun@amd.com>
Reviewed-by: NChris Park <Chris.Park@amd.com>
Acked-by: NRodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Remove propmt for selecting MLX5_VDPA by the user and modify
MLX5_VDPA_NET to select MLX5_VDPA. Also modify MLX5_VDPA_NET to depend
on mlx5_core.

This fixes an issue where configuration sets 'y' for MLX5_VDPA_NET while
MLX5_CORE is compiled as a module causing link errors.
Reported-by: Nkernel test robot <lkp@intel.com>
Fixes: 1a86b377 ("vdpa/mlx5: Add VDPA driver for supported mlx5 device")s
Signed-off-by: NEli Cohen <elic@nvidia.com>
Link: https://lore.kernel.org/r/20201007064011.GA50074@mtl-vdi-166.wap.labs.mlnxSigned-off-by: NMichael S. Tsirkin <mst@redhat.com>

A VM with mlx5 vDPA has below warnings while being reset:

vhost VQ 0 ring restore failed: -1: Resource temporarily unavailable (11)
vhost VQ 1 ring restore failed: -1: Resource temporarily unavailable (11)

We should allow userspace emulating the virtio device be
able to get to vq's avail_index, regardless of vDPA device
status. Save the index that was last seen when virtq was
stopped, so that userspace doesn't complain.
Signed-off-by: NSi-Wei Liu <si-wei.liu@oracle.com>
Link: https://lore.kernel.org/r/1601583511-15138-1-git-send-email-si-wei.liu@oracle.comSigned-off-by: NMichael S. Tsirkin <mst@redhat.com>
Acked-by: NEli Cohen <elic@nvidia.com>

Add usb ids of the Cellient MPL200 card.
Signed-off-by: NWilken Gottwalt <wilken.gottwalt@mailbox.org>
Acked-by: NBjørn Mork <bjorn@mork.no>
Signed-off-by: NJakub Kicinski <kuba@kernel.org>

De-referencing skb after call to gro_cells_receive() is not allowed.
We need to fetch skb->len earlier.

Fixes: 5491e7c6 ("macsec: enable GRO and RPS on macsec devices")
Signed-off-by: NEric Dumazet <edumazet@google.com>
Cc: Paolo Abeni <pabeni@redhat.com>
Acked-by: NPaolo Abeni <pabeni@redhat.com>
Signed-off-by: NJakub Kicinski <kuba@kernel.org>

Some firmware files trigger a PHY soft reset and don't wait for it to
be finished. PHY register writes directly after applying the firmware
may fail or provide unexpected results therefore. Fix this by waiting
for bit BMCR_RESET to be cleared after applying firmware.

There's nothing wrong with the referenced change, it's just that the
fix will apply cleanly only after this change.

Fixes: 89fbd26c ("r8169: fix firmware not resetting tp->ocp_base")
Signed-off-by: NHeiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: NJakub Kicinski <kuba@kernel.org>

Apparently, 15 cycles of the peripheral clock are used by the controller
for sampling and filtering. Because this was not known before, the rate
calculation is slightly off.

Clean up and fix the calculation taking this filtering delay into account.

Fixes: 30021e37 ("i2c: add support for Amlogic Meson I2C controller")
Signed-off-by: NNicolas Belin <nbelin@baylibre.com>
Signed-off-by: NJerome Brunet <jbrunet@baylibre.com>
Signed-off-by: NWolfram Sang <wsa@kernel.org>

SCL rate appears to be different than what is expected. For example,
We get 164kHz on i2c3 of the vim3 when 400kHz is expected. This is
partially due to the peripheral clock being disabled when the clock is
set.

Let's keep the peripheral clock on after probe to fix the problem. This
does not affect the SCL output which is still gated when i2c is idle.

Fixes: 09af1c2f ("i2c: meson: set clock divider in probe instead of setting it for each transfer")
Signed-off-by: NJerome Brunet <jbrunet@baylibre.com>
Signed-off-by: NWolfram Sang <wsa@kernel.org>

When the slave address is written in do_start(), SLAVE_ADDR is written
completely. This may overwrite some setting related to the clock rate
or signal filtering.

Fix this by writing only the bits related to slave address. To avoid
causing unexpected changed, explicitly disable filtering or high/low
clock mode which may have been left over by the bootloader.

Fixes: 30021e37 ("i2c: add support for Amlogic Meson I2C controller")
Signed-off-by: NJerome Brunet <jbrunet@baylibre.com>
Signed-off-by: NWolfram Sang <wsa@kernel.org>

According to the "VFxxx Controller Reference Manual" (and the comment
block starting at line 97), Vybrid requires writing a one for clearing
an interrupt flag. Syncing the method for clearing I2SR_IIF in
i2c_imx_isr().
Signed-off-by: NChristian Eggers <ceggers@arri.de>
Fixes: 4b775022 ("i2c: imx: add struct to hold more configurable quirks")
Reviewed-by: NUwe Kleine-König <u.kleine-koenig@pengutronix.de>
Cc: stable@vger.kernel.org
Signed-off-by: NWolfram Sang <wsa@kernel.org>

We want to use the dev_* functions here rather than the pr_* variants.
Switch to using dev_warn() which mirrors what we do on other asics.

Fixes the following build errors on ARC:

../drivers/gpu/drm/amd/amdgpu/../powerplay/navi10_ppt.c: In function 'navi10_fill_i2c_req':
../arch/arc/include/asm/bug.h:24:2: error: implicit declaration of function 'pr_warn'; did you mean 'drm_warn'? [-Werror=implicit-function-declaration]

../drivers/gpu/drm/amd/amdgpu/../powerplay/sienna_cichlid_ppt.c: In function 'sienna_cichlid_fill_i2c_req':
../arch/arc/include/asm/bug.h:24:2: error: implicit declaration of function 'pr_warn'; did you mean 'drm_warn'? [-Werror=implicit-function-declaration]
Reported-by: Nkernel test robot <lkp@intel.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Evan Quan <evan.quan@amd.com>
Cc: Vineet Gupta <vgupta@synopsys.com>
Cc: linux-snps-arc@lists.infradead.org
Acked-by: NRandy Dunlap <rdunlap@infradead.org>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Commit c1cf79ca ("drm/amdgpu: use IP discovery table for renoir")
introduced a NULL pointer dereference when booting with
amdgpu.discovery=0, because it removed the call of vega10_reg_base_init()
for that case.

Fix this by calling that funcion if amdgpu_discovery == 0 in addition to
the case that amdgpu_discovery_reg_base_init() failed.

Fixes: c1cf79ca ("drm/amdgpu: use IP discovery table for renoir")
Signed-off-by: NDirk Gouders <dirk@gouders.net>
Cc: Hawking Zhang <Hawking.Zhang@amd.com>
Cc: Evan Quan <evan.quan@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

The pca953x driver never checks the result of irq_find_mapping(),
which returns 0 when no mapping is found. When a spurious interrupt
is delivered (which can happen under obscure circumstances), the
kernel explodes as it still tries to handle the error code as
a real interrupt.

Handle this particular case and warn on spurious interrupts.
Signed-off-by: NMarc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20201005140217.1390851-1-maz@kernel.orgSigned-off-by: NLinus Walleij <linus.walleij@linaro.org>

It appears that UML (arch/um) has no compat.h header defined and hence
can't compile a recently provided piece of code in GPIO library.

Disable compat ->read() code in UML case to avoid compilation errors.

While at it, use pattern which is already being used in the kernel elsewhere.

Fixes: 5ad284ab ("gpiolib: Fix line event handling in syscall compatible mode")
Reported-by: NGeert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: NAndy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20201005131044.87276-1-andriy.shevchenko@linux.intel.comSigned-off-by: NLinus Walleij <linus.walleij@linaro.org>