The capture with 44.1kHz on ca0106 seems to cause loud noises on
later playbacks, which doesn't support 44.1kHz.  A simple fix is to
disable 44.1kHz, as the "default" PCM with dsnoop is anyway only with
48kHz.

Reference: Novell bnc#447624
	https://bugzilla.novell.com/show_bug.cgi?id=447624Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Added the missing card->private_data initialization that caused obvious
problems at PM.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Check the availability of ac97 at PM suspend/resume callbacks.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

The register and channel_id pair were twisted in the pm code...
Oh my.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Don't override some values in ca0106_init_chip() at resume.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

This patch removes an inconsistency that became apparent when I
documented the fields of snd_ca0106_details. spi_dac is always
used in a 'boolean' sense, so this cleanup should make no difference.

[Actually, there is one place checking explicitly spi_dac == 1, so
 this will change the behavior.  But, supposing it's rather a typo,
 I apply this clean-up patch -- tiwai]
Signed-off-by: NBen Stanley <Ben.Stanley@exemail.com.au>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Takashi wrote an email [1] explaining the fields of snd_ca0106_details,
so I captured the information into the ca0106.h header file.

[1] http://article.gmane.org/gmane.linux.alsa.devel/56783/match=takashi+gpio_typeSigned-off-by: NBen Stanley <Ben.Stanley@exemail.com.au>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

The return value of pci_enable_device() must be checked even in resume
callback:
  sound/pci/ca0106/ca0106_main.c:1779: warning: ignoring return value of ‘pci_enable_device’, declared with attribute warn_unused_result
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Added the missing PM support for snd-ca0106 driver.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Reduce the command timeout to 0.5sec. Should be enough to allow a
working command interface but removes a RCU stall and slow resume on
some revisions where the AC97 revision detection stalls in resume.
Signed-off-by: NPeter Gruber <nokos@gmx.net>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

The WM9715 is software compatible with the WM9711 and WM9712.
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Fix a build warning
  sound/pci/cs46xx/cs46xx_lib.c:3643: warning: unused variable ‘i’
when CONFIG_SND_CS46XX_NEW_DSP=n.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

The function snd_mixart_create creates a link between mgr and card that
allows snd_mixart_free to free card as well.  But if snd_mixart_create
fails, then the link has not been created and card has to be freed explicitly.

The semantic match that finds the problem is as follows:
(http://www.emn.fr/x-info/coccinelle/)

// <smpl>
@r exists@
local idexpression x;
statement S,S1;
position p1,p2,p3;
expression E,E1;
type T,T1;
expression *ptr != NULL;
@@

(
 if ((x@p1 = snd_card_new(...)) == NULL) S
|
 x@p1 = snd_card_new(...);
)
 ... when != snd_card_free(...,(T)x,...)
     when != if (...) { <+... snd_card_free(...,(T)x,...) ...+> }
     when != true x == NULL || ...
     when != x = E
     when != E = (T)x
     when any
(
 if (x == NULL || ...) S1
|
 if@p2 (...) {
  ... when != snd_card_free(...,(T1)x,...)
      when != if (...) { <+... snd_card_free(...,(T1)x,...) ...+> }
      when != x = E1
      when != E1 = (T1)x
(
  return \(0\|<+...x...+>\|ptr\);
|
  return@p3 ...;
)
}
)

@ script:python @
p1 << r.p1;
p3 << r.p3;
@@

print "* file: %s snd_card_new: %s return: %s" % (p1[0].file,p1[0].line,p3[0].line)

// </smpl>
Signed-off-by: NJulia Lawall <julia@diku.dk>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Check the model type instead of PCI SSID for detection of the mic types
on Dell laptops with IDT 92HD73xx codecs.  In this way, a new laptop
can be tested via model module option.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Fixed the quirk string for Dell studio 1535 (the product name wasn't
published at the time the patch was made).
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

STAC/IDT driver creates "Headphone as Line-Out" switch even if there
is no line-out pins on the machine.  For devices only with headpohnes
and speaker-outs, this switch shouldn't be created.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

The AFG pin power-mapping isn't properly set for the fixed I/O pins
on IDT 92HD* codecs.  This resulted in the low power mode after the
boot until any jack detection is executed, thus no output from the
speaker.

This patch fixes the power mapping for the fixed pins, and also fixes
the GPIO bits and digital I/O pin settings properly in stac92xx_ini().

Reference: Novell bnc#446025
	https://bugzilla.novell.com/show_bug.cgi?id=446025Signed-off-by: NTakashi Iwai <tiwai@suse.de>

SPDIF status bits controls are written via snd_hda_codec_write()
without caching.  This causes a regression at resume that the bits
are lost.

Simply replacing it with the cached version fixes the problem.

Reference:
	http://lkml.org/lkml/2008/11/24/324Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Added the matching model=dell-m6 for Dell Studio 15 laptop.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Added STAC_DELL_M4_3 quirk for Dell systems, also reorganized the
board config switch to assign number of digital muxes, microphones,
and SPDIF muxes via the PCI quirk defined.
Signed-off-by: NMatthew Ranostay <mranostay@embeddedalley.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Add support for EAPD on system suspend and disabling EAPD on headphone jack
detection for STAC_DELL_M6 laptops.

This patch fixes the regressions, the silent output on HP of some Dell
laptops (see Novell bnc#446025):
	https://bugzilla.novell.com/show_bug.cgi?id=446025Signed-off-by: NMatthew Ranostay <mranostay@embeddedalley.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Use cached write for setting the GPIO unsolicited event mask to be
restored properly at resume.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Added the quirk entries for HP Pavilion DV5 and DV7 with model=hp-m4.

Reference: Novell bnc#445321, bnc#445161
	https://bugzilla.novell.com/show_bug.cgi?id=445321
	https://bugzilla.novell.com/show_bug.cgi?id=445161Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Fixed the GPIO mask and co initialization in patch_stac92hd71bxx()
so that the gpio_maks for HP_M4 model is set properly.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Check board preset model instead of codec->subsystem_id in
patch_92hd71bxx() so that other hardwares configured via the model
option work like the given model.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Error handling code following a kzalloc should free the allocated data.
The error handling code is adjusted to call pci_disable_device(pci); as
well, as done later in the function

The semantic match that finds the problem is as follows:
(http://www.emn.fr/x-info/coccinelle/)

// <smpl>
@r exists@
local idexpression x;
statement S;
expression E;
identifier f,l;
position p1,p2;
expression *ptr != NULL;
@@

(
if ((x@p1 = \(kmalloc\|kzalloc\|kcalloc\)(...)) == NULL) S
|
x@p1 = \(kmalloc\|kzalloc\|kcalloc\)(...);
...
if (x == NULL) S
)
<... when != x
     when != if (...) { <+...x...+> }
x->f = E
...>
(
 return \(0\|<+...x...+>\|ptr\);
|
 return@p2 ...;
)

@script:python@
p1 << r.p1;
p2 << r.p2;
@@

print "* file: %s kmalloc %s return %s" % (p1[0].file,p1[0].line,p2[0].line)
// </smpl>
Signed-off-by: NJulia Lawall <julia@diku.dk>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Changed value for STAC_VREF_EVENT from 0x40 to 0x00 because the
unsol response value is only 6-bits width and the former value
was 1<<6 which is an overrun.
Signed-off-by: NMatthew Ranostay <mranostay@embeddedalley.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Added a NULL check of input_allocate_device() in hda_beep.c.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

The digital beep widget may have no mute control, and always enabling
the beep is ofen pretty annoying, especially on laptops.

This patch adds a mixer control "PC Beep Playback Switch" when there
is no mixer amp mute is found, and controls it on software.

Reference: Novell bnc#444572
	https://bugzilla.novell.com/show_bug.cgi?id=444572Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Due to the recent change for multiple HP as line-out switch, only
one of the multiple headphons (usually a wrong one) is toggled
and the other pins are still disabled.  This causes the silent output
problem on some Dell laptops.

Also, the hp_switch check is screwed up when a line-in or a mic-in
jack exists.  This is added as an additional output, but hp_switch
check doesn't take it into account.

This patch fixes these issues: simplify hp_switch check by using
the NID instead of bool, and clean up / fix the toggle of HP pins
in unsol event handler code.

Reference: Novell bnc#443267
	https://bugzilla.novell.com/show_bug.cgi?id=443267Signed-off-by: NTakashi Iwai <tiwai@suse.de>

The input pins are sometimes not initialized properly because
of the optimization check of the current pinctl code.

Force to initialize the mic input pins so that they can be set up
properly even if they were in a weird state.  But keep other input
pins if already set up as input, since this could be an extra mic
pin.

Reference: Novell bnc#443738
	https://bugzilla.novell.com/show_bug.cgi?id=443738Signed-off-by: NTakashi Iwai <tiwai@suse.de>

The creation of analog-mux mixer element is missing in
patch_stac9200() due to the dynamic allocation patch.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Added a QUIRK to patch_analog.c for the HP Elitebook 8530p
(IDs 0x103c:0x30e7) to use AD1884A model 'laptop' by default.
Playback and Capture confirmed working.
Signed-off-by: NTravis Place <wishie@wishie.net>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

currently, the error message when trying to run hdspmixer or hdspconf
if the breakout box is not connected is somehow misleading, since it
asks the user to upload the firmware.

this patch adds a test, whether the breakout box is connected and
tries to upload the firmware in the case, that it is not present, e.g.
because of power failures of the breakout box.

[Minor coding-style fixes by tiwai]
Signed-off-by: NTim Blechmann <tim@klingt.org>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

currently the hdsp driver tries to upload the firmware, even if the
io box is not connected. this patch adds a check for the io box
before trying to upload the firmware.
thus instead of messages complaining about the fifo status and firmware
loading failure, the driver gives a message that no multiface or
digiface is connected.

[A minor coding-style fix by tiwai]
Signed-off-by: NTim Blechmann <tim@klingt.org>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Added model=laptop for another HP machine (103c:3614) with AD1884A
codec.
Signed-off-by: NMichel Marti <mma@objectxp.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

The previous IRQ mask initialization was wrong.  It must set the bits
to be masked.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Use model=lenovo-ms7195-dig for MEDION MD96630 laptop (17c0:4085)
with ALC888 codec.
Reference: Novell bnc#412548
	https://bugzilla.novell.com/show_bug.cgi?id=412528Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Limit the number of GPIOs shown in proc.  Otherwise it gets too long
unnecessarily, and hard to analyze.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Add support for explicitly enabling the EQ distortion hack for
systems without software biquad support.
Signed-off-by: NMatthew Ranostay <mranostay@embeddedalley.com>
Cc: stable@kernel.org
Signed-off-by: NTakashi Iwai <tiwai@suse.de>