Skip to content

K
Kernel

openeuler / Kernel
1 年多 前同步成功

通知 8
Star 0
Fork 0
K
Kernel
切换分支/标签
  1. 11 9月, 2020 1 次提交
    • D
      Bluetooth: Add MGMT capability flags for tx power and ext advertising · d5ea32da
      由 Daniel Winkler 提交于 
      For new advertising features, it will be important for userspace to
know the capabilities of the controller and kernel. If the controller
and kernel support extended advertising, we include flags indicating
hardware offloading support and support for setting tx power of adv
instances.

In the future, vendor-specific commands may allow the setting of tx
power in advertising instances, but for now this feature is only
marked available if extended advertising is supported.

This change is manually verified in userspace by ensuring the
advertising manager's supported_flags field is updated with new flags on
hatch chromebook (ext advertising supported).
Signed-off-by: NDaniel Winkler <danielwinkler@google.com>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>
      d5ea32da
  3. 01 8月, 2020 4 次提交
  5. 31 7月, 2020 13 次提交
  7. 30 7月, 2020 4 次提交
  9. 29 7月, 2020 1 次提交
  11. 28 7月, 2020 1 次提交
  13. 25 7月, 2020 9 次提交
  15. 24 7月, 2020 1 次提交
    • V
      net: dsa: stop overriding master's ndo_get_phys_port_name · 5df5661a
      由 Vladimir Oltean 提交于 
      The purpose of this override is to give the user an indication of what
the number of the CPU port is (in DSA, the CPU port is a hardware
implementation detail and not a network interface capable of traffic).

However, it has always failed (by design) at providing this information
to the user in a reliable fashion.

Prior to commit 3369afba ("net: Call into DSA netdevice_ops
wrappers"), the behavior was to only override this callback if it was
not provided by the DSA master.

That was its first failure: if the DSA master itself was a DSA port or a
switchdev, then the user would not see the number of the CPU port in
/sys/class/net/eth0/phys_port_name, but the number of the DSA master
port within its respective physical switch.

But that was actually ok in a way. The commit mentioned above changed
that behavior, and now overrides the master's ndo_get_phys_port_name
unconditionally. That comes with problems of its own, which are worse in
a way.

The idea is that it's typical for switchdev users to have udev rules for
consistent interface naming. These are based, among other things, on
the phys_port_name attribute. If we let the DSA switch at the bottom
to start randomly overriding ndo_get_phys_port_name with its own CPU
port, we basically lose any predictability in interface naming, or even
uniqueness, for that matter.

So, there are reasons to let DSA override the master's callback (to
provide a consistent interface, a number which has a clear meaning and
must not be interpreted according to context), and there are reasons to
not let DSA override it (it breaks udev matching for the DSA master).

But, there is an alternative method for users to retrieve the number of
the CPU port of each DSA switch in the system:

  $ devlink port
  pci/0000:00:00.5/0: type eth netdev swp0 flavour physical port 0
  pci/0000:00:00.5/2: type eth netdev swp2 flavour physical port 2
  pci/0000:00:00.5/4: type notset flavour cpu port 4
  spi/spi2.0/0: type eth netdev sw0p0 flavour physical port 0
  spi/spi2.0/1: type eth netdev sw0p1 flavour physical port 1
  spi/spi2.0/2: type eth netdev sw0p2 flavour physical port 2
  spi/spi2.0/4: type notset flavour cpu port 4
  spi/spi2.1/0: type eth netdev sw1p0 flavour physical port 0
  spi/spi2.1/1: type eth netdev sw1p1 flavour physical port 1
  spi/spi2.1/2: type eth netdev sw1p2 flavour physical port 2
  spi/spi2.1/3: type eth netdev sw1p3 flavour physical port 3
  spi/spi2.1/4: type notset flavour cpu port 4

So remove this duplicated, unreliable and troublesome method. From this
patch on, the phys_port_name attribute of the DSA master will only
contain information about itself (if at all). If the users need reliable
information about the CPU port they're probably using devlink anyway.
Signed-off-by: NVladimir Oltean <olteanv@gmail.com>
Acked-by: Nflorian Fainelli <f.fainelli@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      5df5661a
  17. 22 7月, 2020 2 次提交
  19. 21 7月, 2020 2 次提交
  21. 20 7月, 2020 2 次提交
    • W
      icmp: support rfc 4884 · eba75c58
      由 Willem de Bruijn 提交于 
      Add setsockopt SOL_IP/IP_RECVERR_4884 to return the offset to an
extension struct if present.

ICMP messages may include an extension structure after the original
datagram. RFC 4884 standardized this behavior. It stores the offset
in words to the extension header in u8 icmphdr.un.reserved[1].

The field is valid only for ICMP types destination unreachable, time
exceeded and parameter problem, if length is at least 128 bytes and
entire packet does not exceed 576 bytes.

Return the offset to the start of the extension struct when reading an
ICMP error from the error queue, if it matches the above constraints.

Do not return the raw u8 field. Return the offset from the start of
the user buffer, in bytes. The kernel does not return the network and
transport headers, so subtract those.

Also validate the headers. Return the offset regardless of validation,
as an invalid extension must still not be misinterpreted as part of
the original datagram. Note that !invalid does not imply valid. If
the extension version does not match, no validation can take place,
for instance.

For backward compatibility, make this optional, set by setsockopt
SOL_IP/IP_RECVERR_RFC4884. For API example and feature test, see
github.com/wdebruij/kerneltools/blob/master/tests/recv_icmp_v2.c

For forward compatibility, reserve only setsockopt value 1, leaving
other bits for additional icmp extensions.

Changes
  v1->v2:
  - convert word offset to byte offset from start of user buffer
    - return in ee_data as u8 may be insufficient
  - define extension struct and object header structs
  - return len only if constraints met
  - if returning len, also validate
Signed-off-by: NWillem de Bruijn <willemb@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      eba75c58
    • L
      xdp: introduce xdp_get_shared_info_from_{buff, frame} utility routines · 2f0bc54b
      由 Lorenzo Bianconi 提交于 
      Introduce xdp_get_shared_info_from_{buff,frame} utility routines to get
skb_shared_info from xdp buffer/frame pointer.
xdp_get_shared_info_from_{buff,frame} will be used to implement xdp
multi-buffer support
Signed-off-by: NLorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      2f0bc54b