Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Not entirely convinced 0x004018 transitions are correct yet, but, it's
an improvement.

The 750MHz value comes from fiddling with the binary driver + coolbits on
two different DDR3 NVA8 chipsets (T510 NVS3100M, and NVS300), not a clue
where this number comes from.
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Probably not quite right, but this is enough now to make NVS300 reclock
between all 3 of its perflvls correctly.
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

This probably wants a cleanup, but I'm holding off until I know for sure
how the rest of the things that need doing fit together.

Tested on NVS300 by hacking up perflvl 1 to require PLL mode, and switching
between perflvl 3 and 1.
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

The binary driver appears to do various bits and pieces of the memory
clock frequency change at different times, depending on the particular
transition that's occuring.  I've attempted to replicate this here
for div->pll, pll->div and div->div transitions.

With some additional (patches upcoming) magic regs being bashed, this
allows me to correctly transition between all 3 perflvls on NVS300.

pll->pll transitions will *not* work correctly at the moment, pending
me tricking the binary driver into doing one and seeing how to correctly
handle it.

This patch also handles (hopefully) 0x1110e0, which appears to need
changing depending on whether in PLL or divider mode.. Maybe.  We'll
see.
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

The reg calculation may get moved elsewhere at some point, but lets
figure out what exactly we need to do first.
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

This gets us a start on memory timings.
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Reported-by: wfg@linux.intel.com
Signed-off-by: NDave Airlie <airlied@redhat.com>

these functions and the table can all be static/static const.

Reported-by: wfg@linux.intel.com
Signed-off-by: NDave Airlie <airlied@redhat.com>

New drivers merged after changes were done in prime TTM code.

Fix build.
Signed-off-by: NDave Airlie <airlied@redhat.com>

* 'prime-merge' of ssh://people.freedesktop.org/~airlied/linux:
  drm/radeon: add PRIME support (v2)
  i915: add dmabuf/prime buffer sharing support.
  nouveau: add PRIME support
  ttm: add prime sharing support to TTM (v2)
  udl: add prime fd->handle support.
  drm/prime: add exported buffers to current fprivs imported buffer list (v2)
  drm/prime: introduce sg->pages/addr arrays helper

This adds prime->fd and fd->prime support to radeon.
It passes the sg object to ttm and then populates
the gart entries using it.

Compile tested only.

v2: stub kmap + use new helpers + add reimporting
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Reviewed-by: NJerome Glisse <jglisse@redhat.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

This adds handle->fd and fd->handle support to i915, this is to allow
for offloading of rendering in one direction and outputs in the other.

v2 from Daniel Vetter:
- fixup conflicts with the prepare/finish gtt prep work.
- implement ppgtt binding support.

Note that we have squat i-g-t testcoverage for any of the lifetime and
access rules dma_buf/prime support brings along. And there are quite a
few intricate situations here.

Also note that the integration with the existing code is a bit
hackish, especially around get_gtt_pages and put_gtt_pages. It imo
would be easier with the prep code from Chris Wilson's unbound series,
but that is for 3.6.

Also note that I didn't bother to put the new prepare/finish gtt hooks
to good use by moving the dma_buf_map/unmap_attachment calls in there
(like we've originally planned for).

Last but not least this patch is only compile-tested, but I've changed
very little compared to Dave Airlie's version. So there's a decent
chance v2 on drm-next works as well as v1 on 3.4-rc.

v3: Right when I've hit sent I've noticed that I've screwed up one
obj->sg_list (for dmar support) and obj->sg_table (for prime support)
disdinction. We should be able to merge these 2 paths, but that's
material for another patch.

v4: fix the error reporting bugs pointed out by ickle.

v5: fix another error, and stop non-gtt mmaps on shared objects
stop pread/pwrite on imported objects, add fake kmap
Signed-off-by: NDave Airlie <airlied@redhat.com>
Signed-Off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

This adds prime->fd and fd->prime support to nouveau,
it passes the SG object to TTM, and then populates the
GART entries using it.

v2: add stubbed kmap + use new function to fill out pages array
for faulting + add reimport test.
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

This adds the ability for ttm common code to take an SG table
and use it as the backing for a slave TTM object.

The drivers can then populate their GTT tables using the SG object.

v2: make sure to setup VM for sg bos as well.
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Reviewed-by: NJerome Glisse <jglisse@redhat.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

udl can only be used as an output offload so doesn't need to support
handle->fd direction.
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

If userspace attempts to import a buffer it exported on the same device,
we need to return the same GEM handle for it, not a new handle pointing
at the same GEM object.

v2: move removals into a single fn, no need to set to NULL. (Chris Wilson)
Signed-off-by: NDave Airlie <airlied@redhat.com>

the ttm drivers need this currently, in order to get fault handling
working and efficient.

It also allows addrs to be NULL for devices like udl.
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

The omapdrm driver uses this for setting per-overlay rotation.  It
is likely also useful for setting YUV->RGB colorspace conversion
matrix, etc.
Signed-off-by: NRob Clark <rob@ti.com>
Reviewed-by: NPaulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

A bitmask property is similar to an enum.  The enum value is a bit
position (0-63), and valid property values consist of a mask of
zero or more of (1 << enum_val[n]).

[airlied: 1LL -> 1ULL]
Signed-off-by: NRob Clark <rob@ti.com>
Reviewed-by: NPaulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Merge branch 'exynos-drm-next' of git://git.infradead.org/users/kmpark/linux-samsung into drm-core-next

* 'exynos-drm-next' of git://git.infradead.org/users/kmpark/linux-samsung:
  drm/exynos: add G2D driver
  drm/exynos: added vp scaling feature for hdmi
  drm/exynos: added source size to overlay structure
  drm/exynos: add additional display mode for hdmi
  drm/exynos: enable dvi mode for dvi monitor
  drm/exynos: fixed wrong pageflip finish event for interlace mode
  drm/exynos: add PM functions for hdmi and mixer
  drm/exynos: add dpms for hdmi
  drm/exynos: use threaded irq for hdmi hotplug
  drm/exynos: use platform_get_irq_byname for hdmi
  drm/exynos: cleanup for hdmi platform data
  drm/exynos: added a feature to get gem buffer information.
  drm/exynos: added drm prime feature.
  drm/exynos: added cache attribute support for gem.
  vgaarb: Provide dummy default device functions

Drivers for hardware without gamma support should not be forced to
implement a no-op gamma set operation.
Signed-off-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Rob Clark <rob.clark@linaro.org>
Signed-off-by: NDave Airlie <airlied@redhat.com>

The DRM mode config functions structure declared by drivers and pointed
to by the drm_mode_config funcs field is never modified. Make it a const
pointer.
Signed-off-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Inki Dae <inki.dae@samsung.com>
Cc: Alan Cox <alan@linux.intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Ben Skeggs <bskeggs@redhat.com>
Cc: Thomas Hellstrom <thellstrom@vmware.com>
Cc: Rob Clark <rob.clark@linaro.org>
Reviwed-by: NAlex Deucher <alexdeucher@gmail.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

The GEM vm operations structure is passed to the VM core that stores it
in a const field. There vm operations structures can thus be const in
DRM as well.
Signed-off-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Inki Dae <inki.dae@samsung.com>
Cc: Alan Cox <alan@linux.intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Rob Clark <rob.clark@linaro.org>
Reviewed-by: NAlex Deucher <alexdeucher@gmail.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Signed-off-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Signed-off-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

A race condition exists in drm_vblank_cleanup() if the vblank disable
timer callback runs after freeing the memory that its callback function
tries to access. Fix this by deleting the timer synchronously.
Signed-off-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

The power field was never correctly initialized.

[airlied: just took the two drm specific bits]
Signed-off-by: NCorentin Chary <corentin.chary@gmail.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

(airlied: v2: fix missing struct - fixes compile)
Signed-off-by: NAdam Jackson <ajax@redhat.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Signed-off-by: NAdam Jackson <ajax@redhat.com>
Acked-by: NAlex Deucher <alexander.deucher@amd.com>
Reviewed-by: NJerome Glisse <jglisse@redhat.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Signed-off-by: NAdam Jackson <ajax@redhat.com>
Acked-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Low four bits are downstream port count.  High bit indicates peer OUI
support.  OUI matching will allow us to do additional per-sink handling
for things like DP->VGA bandwidth limits or (hopefully) the iMac-as-
display hack.
Signed-off-by: NAdam Jackson <ajax@redhat.com>
Reviewed-by: NJerome Glisse <jglisse@redhat.com>
Acked-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

DisplayPort has an escape hatch by which sources and sinks can identify
each other.  We would prefer not to notice this, but I suspect we're
going to need to.
Signed-off-by: NAdam Jackson <ajax@redhat.com>
Reviewed-by: NJerome Glisse <jglisse@redhat.com>
Acked-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Reported-by: NGuillaume Clément <guillaume@baobob.org>
Signed-off-by: NAlan Cox <alan@linux.intel.com>
Cc: stable@vger.kernel.org
Signed-off-by: NDave Airlie <airlied@redhat.com>

Poulsbo needs a physical address in the cursor base register. We allocate a
stolen memory buffer and copy the cursor image provided by userspace into it.
When/If we get our own userspace driver we can map this stolen memory directly.
The patch also adds a mark in chip ops so we can identify devices that has this
requirement.
Signed-off-by: NPatrik Jakobsson <patrik.r.jakobsson@gmail.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Some devices don't have a panel connected to LVDS and thus will never power up.
This patch checks the power sequence progress bits in PP_STATUS to prevent an
endless loop on such devices.
Signed-off-by: NPatrik Jakobsson <patrik.r.jakobsson@gmail.com>
Signed-off-by: NAlan Cox <alan@linux.intel.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>