1. 01 2月, 2008 4 次提交
  2. 16 10月, 2007 3 次提交
  3. 11 5月, 2007 4 次提交
  4. 09 2月, 2007 2 次提交
  5. 20 12月, 2006 1 次提交
  6. 05 10月, 2006 1 次提交
    • D
      IRQ: Maintain regs pointer globally rather than passing to IRQ handlers · 7d12e780
      David Howells 提交于
      Maintain a per-CPU global "struct pt_regs *" variable which can be used instead
      of passing regs around manually through all ~1800 interrupt handlers in the
      Linux kernel.
      
      The regs pointer is used in few places, but it potentially costs both stack
      space and code to pass it around.  On the FRV arch, removing the regs parameter
      from all the genirq function results in a 20% speed up of the IRQ exit path
      (ie: from leaving timer_interrupt() to leaving do_IRQ()).
      
      Where appropriate, an arch may override the generic storage facility and do
      something different with the variable.  On FRV, for instance, the address is
      maintained in GR28 at all times inside the kernel as part of general exception
      handling.
      
      Having looked over the code, it appears that the parameter may be handed down
      through up to twenty or so layers of functions.  Consider a USB character
      device attached to a USB hub, attached to a USB controller that posts its
      interrupts through a cascaded auxiliary interrupt controller.  A character
      device driver may want to pass regs to the sysrq handler through the input
      layer which adds another few layers of parameter passing.
      
      I've build this code with allyesconfig for x86_64 and i386.  I've runtested the
      main part of the code on FRV and i386, though I can't test most of the drivers.
      I've also done partial conversion for powerpc and MIPS - these at least compile
      with minimal configurations.
      
      This will affect all archs.  Mostly the changes should be relatively easy.
      Take do_IRQ(), store the regs pointer at the beginning, saving the old one:
      
      	struct pt_regs *old_regs = set_irq_regs(regs);
      
      And put the old one back at the end:
      
      	set_irq_regs(old_regs);
      
      Don't pass regs through to generic_handle_irq() or __do_IRQ().
      
      In timer_interrupt(), this sort of change will be necessary:
      
      	-	update_process_times(user_mode(regs));
      	-	profile_tick(CPU_PROFILING, regs);
      	+	update_process_times(user_mode(get_irq_regs()));
      	+	profile_tick(CPU_PROFILING);
      
      I'd like to move update_process_times()'s use of get_irq_regs() into itself,
      except that i386, alone of the archs, uses something other than user_mode().
      
      Some notes on the interrupt handling in the drivers:
      
       (*) input_dev() is now gone entirely.  The regs pointer is no longer stored in
           the input_dev struct.
      
       (*) finish_unlinks() in drivers/usb/host/ohci-q.c needs checking.  It does
           something different depending on whether it's been supplied with a regs
           pointer or not.
      
       (*) Various IRQ handler function pointers have been moved to type
           irq_handler_t.
      Signed-Off-By: NDavid Howells <dhowells@redhat.com>
      (cherry picked from 1b16e7ac850969f38b375e511e3fa2f474a33867 commit)
      7d12e780
  7. 13 7月, 2006 1 次提交
  8. 03 7月, 2006 1 次提交
  9. 23 6月, 2006 2 次提交
  10. 28 4月, 2006 1 次提交
  11. 22 3月, 2006 1 次提交
  12. 03 1月, 2006 1 次提交
  13. 11 11月, 2005 1 次提交
  14. 04 11月, 2005 2 次提交
  15. 12 9月, 2005 3 次提交
    • C
      [ALSA] set owner field in struct pci_driver · 3bcd4649
      Clemens Ladisch 提交于
      AD1889 driver,ALS4000 driver,ATIIXP driver,ATIIXP-modem driver
      AZT3328 driver,BT87x driver,CMIPCI driver,CS4281 driver
      ENS1370/1+ driver,ES1938 driver,ES1968 driver,FM801 driver
      Intel8x0 driver,Intel8x0-modem driver,Maestro3 driver,RME32 driver
      RME96 driver,SonicVibes driver,VIA82xx driver,VIA82xx-modem driver
      ALI5451 driver,au88x0 driver,CS46xx driver,EMU10K1/EMU10K2 driver
      HDA Intel driver,ICE1712 driver,ICE1724 driver,KORG1212 driver
      MIXART driver,NM256 driver,RME HDSP driver,RME9652 driver
      Trident driver,Digigram VX222 driver,YMFPCI driver
      Set the module owner field in each driver's struct pci_driver to get
      the driver symlink in the sysfs device directory.
      Signed-off-by: NClemens Ladisch <clemens@ladisch.de>
      3bcd4649
    • T
      [ALSA] Replace with kzalloc() - pci stuff · e560d8d8
      Takashi Iwai 提交于
      AD1889 driver,ATIIXP driver,ATIIXP-modem driver,AZT3328 driver
      BT87x driver,CMIPCI driver,CS4281 driver,ENS1370/1+ driver
      ES1938 driver,ES1968 driver,FM801 driver,Intel8x0 driver
      Intel8x0-modem driver,Maestro3 driver,SonicVibes driver,VIA82xx driver
      VIA82xx-modem driver,AC97 Codec,AK4531 codec,au88x0 driver
      CA0106 driver,CS46xx driver,EMU10K1/EMU10K2 driver,HDA Codec driver
      HDA generic driver,HDA Intel driver,ICE1712 driver,ICE1724 driver
      KORG1212 driver,MIXART driver,NM256 driver,Trident driver,YMFPCI driver
      Replace kcalloc(1,..) with kzalloc().
      Signed-off-by: NTakashi Iwai <tiwai@suse.de>
      e560d8d8
    • T
      [ALSA] Remove superfluous PCI ID definitions · 8cdfd251
      Takashi Iwai 提交于
      CS46xx driver,EMU10K1/EMU10K2 driver,PCM Midlevel,Trident driver
      YMFPCI driver,BT87x driver,CMIPCI driver,CS4281 driver
      ENS1370/1+ driver,ES1938 driver,ES1968 driver,Intel8x0 driver
      Intel8x0-modem driver,Maestro3 driver,RME32 driver,RME96 driver
      SonicVibes driver,VIA82xx driver,ALI5451 driver,ICE1712 driver
      ICE1724 driver,NM256 driver,RME HDSP driver,RME9652 driver
      Remove superfluous PCI ID definitions.
      Signed-off-by: NTakashi Iwai <tiwai@suse.de>
      8cdfd251
  16. 30 8月, 2005 2 次提交
    • C
      [ALSA] use SNDRV_CTL_NAME_IEC958 macro · 10e8d78a
      Clemens Ladisch 提交于
      CMI8330 driver,ENS1370/1+ driver,FM801 driver,VIA82xx driver,AC97 Codec
      ALI5451 driver,CS46xx driver,EMU10K1/EMU10K2 driver,HDA Codec driver
      ICE1712 driver,ICE1724 driver
      Where appropriate, use the SNDRV_CTL_NAME_IEC958 instead of a literal
      string.
      Signed-off-by: NClemens Ladisch <clemens@ladisch.de>
      10e8d78a
    • C
      [ALSA] sound - fix .iface field of mixer control elements · 67ed4161
      Clemens Ladisch 提交于
      Documentation,CS46xx driver,EMU10K1/EMU10K2 driver,AD1848 driver
      SB16/AWE driver,CMIPCI driver,ENS1370/1+ driver,RME32 driver
      RME96 driver,ICE1712 driver,ICE1724 driver,KORG1212 driver
      RME HDSP driver,RME9652 driver
      This patch changes .iface to SNDRV_CTL_ELEM_IFACE_MIXER whre _PCM or
      _HWDEP was used in controls that are not associated with a specific PCM
      (sub)stream or hwdep device, and changes some controls that got
      inconsitent .iface values due to copy+paste errors.  Furthermore, it
      makes sure that all control that do use _PCM or _HWDEP use the correct
      number in the .device field.
      Signed-off-by: NClemens Ladisch <clemens@ladisch.de>
      67ed4161
  17. 29 5月, 2005 1 次提交
    • T
      [ALSA] Replace pci_module_init() with pci_register_driver() · 01d25d46
      Takashi Iwai 提交于
      Documentation,ALS4000 driver,ATIIXP driver,ATIIXP-modem driver
      AZT3328 driver,BT87x driver,CMIPCI driver,CS4281 driver
      ENS1370/1+ driver,ES1938 driver,ES1968 driver,FM801 driver
      Intel8x0 driver,Intel8x0-modem driver,Maestro3 driver,RME32 driver
      RME96 driver,SonicVibes driver,VIA82xx driver,VIA82xx-modem driver
      ALI5451 driver,au88x0 driver,CA0106 driver,CS46xx driver
      EMU10K1/EMU10K2 driver,HDA Intel driver,ICE1712 driver,ICE1724 driver
      KORG1212 driver,MIXART driver,NM256 driver,RME HDSP driver
      RME9652 driver,Trident driver,Digigram VX222 driver,YMFPCI driver
      Replace the obsolete pci_module_init() with pci_register_driver().
      Signed-off-by: NTakashi Iwai <tiwai@suse.de>
      01d25d46
  18. 17 4月, 2005 1 次提交
    • L
      Linux-2.6.12-rc2 · 1da177e4
      Linus Torvalds 提交于
      Initial git repository build. I'm not bothering with the full history,
      even though we have it. We can create a separate "historical" git
      archive of that later if we want to, and in the meantime it's about
      3.2GB when imported into git - space that would just make the early
      git days unnecessarily complicated, when we don't have a lot of good
      infrastructure for it.
      
      Let it rip!
      1da177e4