- 12 6月, 2021 15 次提交
-
-
由 Julian Wiedmann 提交于
qeth_tx_complete_buf() is the only remaining user of buf->q, and the callers can easily provide this as a parameter instead. Signed-off-by: NJulian Wiedmann <jwi@linux.ibm.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Julian Wiedmann 提交于
Maintaining a pointer inside the aob's user-definable area is fragile and unnecessary. At this stage we only need it to overload the buffer's state field, and to access the buffer's TX queue. The first part is easily solved by tracking the aob's state within the aob itself. This also feels much cleaner and self-contained. For enabling the access to the associated TX queue, we can store the queue's index in the aob. Signed-off-by: NJulian Wiedmann <jwi@linux.ibm.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Julian Wiedmann 提交于
With commit 396c1004 ("s390/qdio: let driver manage the QAOB") a pending TX buffer now has access to its associated QAOB during TX completion processing. We can thus reduce the amount of work & state propagation that needs to be done by qeth_qdio_handle_aob(). Move all this logic into the respective TX completion paths. Doing so even allows us to determine more precise TX_NOTIFY_* values via qeth_compute_cq_notification(aob->aorc, ...). Signed-off-by: NJulian Wiedmann <jwi@linux.ibm.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Julian Wiedmann 提交于
Use a recently introduced helper to fill our ethtool stats strings. Signed-off-by: NJulian Wiedmann <jwi@linux.ibm.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Julian Wiedmann 提交于
We have one field to track _whether_ a cmd is active on a ccw device ('irq_pending'), and one to track _which_ cmd it is ('active_cmd'). Get rid of the irq_pending field, by testing active_cmd for NULL. Signed-off-by: NJulian Wiedmann <jwi@linux.ibm.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Julian Wiedmann 提交于
Set scan_threshold = 0 to opt out from the qdio layer's internal tasklet & timer mechanism for TX completions, and replace it with the TX NAPI infrastructure that qeth already uses for IQD devices. This avoids the fragile logic in qdio_check_output_queue(), enables tighter integration and gives us more tuning options via ethtool in the future. For now we continue to apply the same policy as the qdio layer: scan for completions if 32 TX buffers are in use, or after 1 sec. A re-scan is done after 10 sec, but only if no TX interrupt is pending. With scan_threshold = 0 we no longer get TX completion scans from within qdio_get_next_buffers(). So trigger these manually in qeth_poll() and in the RX path switch to the equivalent qdio_inspect_queue(). Signed-off-by: NJulian Wiedmann <jwi@linux.ibm.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Julian Wiedmann 提交于
While the qdio layer already tracks the number of HW interrupts for a device, there's value in understanding how many of them have been raised due to our TX completion logic. Signed-off-by: NJulian Wiedmann <jwi@linux.ibm.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Vladimir Oltean 提交于
The TX timestamping procedure for SJA1105 is a bit unconventional because the transmit procedure itself is unconventional. Control packets (and therefore PTP as well) are transmitted to a specific port in SJA1105 using "management routes" which must be written over SPI to the switch. These are one-shot rules that match by destination MAC address on traffic coming from the CPU port, and select the precise destination port for that packet. So to transmit a packet from NET_TX softirq context, we actually need to defer to a process context so that we can perform that SPI write before we send the packet. The DSA master dev_queue_xmit() runs in process context, and we poll until the switch confirms it took the TX timestamp, then we annotate the skb clone with that TX timestamp. This is why the sja1105 driver does not need an skb queue for TX timestamping. But the SJA1110 is a bit (not much!) more conventional, and you can request 2-step TX timestamping through the DSA header, as well as give the switch a cookie (timestamp ID) which it will give back to you when it has the timestamp. So now we do need a queue for keeping the skb clones until their TX timestamps become available. The interesting part is that the metadata frames from SJA1105 haven't disappeared completely. On SJA1105 they were used as follow-ups which contained RX timestamps, but on SJA1110 they are actually TX completion packets, which contain a variable (up to 32) array of timestamps. Why an array? Because: - not only is the TX timestamp on the egress port being communicated, but also the RX timestamp on the CPU port. Nice, but we don't care about that, so we ignore it. - because a packet could be multicast to multiple egress ports, each port takes its own timestamp, and the TX completion packet contains the individual timestamps on each port. This is unconventional because switches typically have a timestamping FIFO and raise an interrupt, but this one doesn't. So the tagger needs to detect and parse meta frames, and call into the main switch driver, which pairs the timestamps with the skbs in the TX timestamping queue which are waiting for one. Signed-off-by: NVladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Vladimir Oltean 提交于
This is really easy, since the full RX timestamp is in the DSA trailer and the tagger code transfers it to SJA1105_SKB_CB(skb)->tstamp, we just need to move it to the skb shared info region. This is as opposed to SJA1105, where the RX timestamp was received in a meta frame (so there needed to be a state machine to pair the 2 packets) and the timestamp was partial (so the packet, once matched with its timestamp, needed to be added to an RX timestamping queue where the PTP aux worker would reconstruct that timestamp). Signed-off-by: NVladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Vladimir Oltean 提交于
The SJA1110 has improved a few things compared to SJA1105: - To send a control packet from the host port with SJA1105, one needed to program a one-shot "management route" over SPI. This is no longer true with SJA1110, you can actually send "in-band control extensions" in the packets sent by DSA, these are in fact DSA tags which contain the destination port and switch ID. - When receiving a control packet from the switch with SJA1105, the source port and switch ID were written in bytes 3 and 4 of the destination MAC address of the frame (which was a very poor shot at a DSA header). If the control packet also had an RX timestamp, that timestamp was sent in an actual follow-up packet, so there were reordering concerns on multi-core/multi-queue DSA masters, where the metadata frame with the RX timestamp might get processed before the actual packet to which that timestamp belonged (there is no way to pair a packet to its timestamp other than the order in which they were received). On SJA1110, this is no longer true, control packets have the source port, switch ID and timestamp all in the DSA tags. - Timestamps from the switch were partial: to get a 64-bit timestamp as required by PTP stacks, one would need to take the partial 24-bit or 32-bit timestamp from the packet, then read the current PTP time very quickly, and then patch in the high bits of the current PTP time into the captured partial timestamp, to reconstruct what the full 64-bit timestamp must have been. That is awful because packet processing is done in NAPI context, but reading the current PTP time is done over SPI and therefore needs sleepable context. But it also aggravated a few things: - Not only is there a DSA header in SJA1110, but there is a DSA trailer in fact, too. So DSA needs to be extended to support taggers which have both a header and a trailer. Very unconventional - my understanding is that the trailer exists because the timestamps couldn't be prepared in time for putting them in the header area. - Like SJA1105, not all packets sent to the CPU have the DSA tag added to them, only control packets do: * the ones which match the destination MAC filters/traps in MAC_FLTRES1 and MAC_FLTRES0 * the ones which match FDB entries which have TRAP or TAKETS bits set So we could in theory hack something up to request the switch to take timestamps for all packets that reach the CPU, and those would be DSA-tagged and contain the source port / switch ID by virtue of the fact that there needs to be a timestamp trailer provided. BUT: - The SJA1110 does not parse its own DSA tags in a way that is useful for routing in cross-chip topologies, a la Marvell. And the sja1105 driver already supports cross-chip bridging from the SJA1105 days. It does that by automatically setting up the DSA links as VLAN trunks which contain all the necessary tag_8021q RX VLANs that must be communicated between the switches that span the same bridge. So when using tag_8021q on sja1105, it is possible to have 2 switches with ports sw0p0, sw0p1, sw1p0, sw1p1, and 2 VLAN-unaware bridges br0 and br1, and br0 can take sw0p0 and sw1p0, and br1 can take sw0p1 and sw1p1, and forwarding will happen according to the expected rules of the Linux bridge. We like that, and we don't want that to go away, so as a matter of fact, the SJA1110 tagger still needs to support tag_8021q. So the sja1110 tagger is a hybrid between tag_8021q for data packets, and the native hardware support for control packets. On RX, packets have a 13-byte trailer if they contain an RX timestamp. That trailer is padded in such a way that its byte 8 (the start of the "residence time" field - not parsed by Linux because we don't care) is aligned on a 16 byte boundary. So the padding has a variable length between 0 and 15 bytes. The DSA header contains the offset of the beginning of the padding relative to the beginning of the frame (and the end of the padding is obviously the end of the packet minus 13 bytes, the length of the trailer). So we discard it. Packets which don't have a trailer contain the source port and switch ID information in the header (they are "trap-to-host" packets). Packets which have a trailer contain the source port and switch ID in the trailer. On TX, the destination port mask and switch ID is always in the trailer, so we always need to say in the header that a trailer is present. The header needs a custom EtherType and this was chosen as 0xdadc, after 0xdada which is for Marvell and 0xdadb which is for VLANs in VLAN-unaware mode on SJA1105 (and SJA1110 in fact too). Because we use tag_8021q in concert with the native tagging protocol, control packets will have 2 DSA tags. Signed-off-by: NVladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Vladimir Oltean 提交于
In SJA1105, RX timestamps for packets sent to the CPU are transmitted in separate follow-up packets (metadata frames). These contain partial timestamps (24 or 32 bits) which are kept in SJA1105_SKB_CB(skb)->meta_tstamp. Thankfully, SJA1110 improved that, and the RX timestamps are now transmitted in-band with the actual packet, in the timestamp trailer. The RX timestamps are now full-width 64 bits. Because we process the RX DSA tags in the rcv() method in the tagger, but we would like to preserve the DSA code structure in that we populate the skb timestamp in the port_rxtstamp() call which only happens later, the implication is that we must somehow pass the 64-bit timestamp from the rcv() method all the way to port_rxtstamp(). We can use the skb->cb for that. Rename the meta_tstamp from struct sja1105_skb_cb from "meta_tstamp" to "tstamp", and increase its size to 64 bits. Signed-off-by: NVladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Vladimir Oltean 提交于
On SJA1105, there is support for a cascade port which is presumably connected to a downstream SJA1105 switch. The upstream one does not take PTP timestamps for packets received on this port, presumably because the downstream switch already did (and for PTP, it only makes sense for the leaf nodes in a DSA switch tree to do that). I haven't been able to validate that feature in a fully assembled setup, so I am disabling the feature by setting the cascade port to an unused port value (ds->num_ports). In SJA1110, multiple cascade ports are supported, and CASC_PORT became a bit mask from a port number. So when CASC_PORT is set to ds->num_ports (which is 11 on SJA1110), it is actually set to 0b1011, so ports 3, 1 and 0 are configured as cascade ports and we cannot take RX timestamps on them. So we need to introduce a check for SJA1110 and set things differently (to zero there), so that the cascading feature is properly disabled and RX timestamps can be taken on all ports. Signed-off-by: NVladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Vladimir Oltean 提交于
As opposed to SJA1105 where there are parts with TTEthernet and parts without, in SJA1110 all parts support it, but it must be enabled in the static config. So enable it unconditionally. We use it for the tc-taprio and tc-gate offload. Signed-off-by: NVladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Huazhong Tan 提交于
Add a debugfs interface for dumping ptp information, which is helpful for debugging. Signed-off-by: NHuazhong Tan <tanhuazhong@huawei.com> Signed-off-by: NYufeng Mo <moyufeng@huawei.com> Signed-off-by: NGuangbin Huang <huangguangbin2@huawei.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Huazhong Tan 提交于
Adds PTP support for HNS3 ethernet driver. Signed-off-by: NHuazhong Tan <tanhuazhong@huawei.com> Signed-off-by: NYufeng Mo <moyufeng@huawei.com> Signed-off-by: NGuangbin Huang <huangguangbin2@huawei.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 11 6月, 2021 25 次提交
-
-
由 Alex Elder 提交于
Finally the code handles the IPA memory region array in the configuration data without assuming it is indexed by region ID. Get rid of the array index designators where these arrays are initialized. As a result, there's no more need to define an explicitly undefined memory region ID, so get rid of that. Change ipa_mem_find() so it no longer assumes the ipa->mem[] array is indexed by memory region ID. Instead, have it search the array for the entry having the requested memory ID, and return the address of the descriptor if found. Otherwise return NULL. Stop allowing memory regions to be defined with zero size and zero canary value. Check for this condition in ipa_mem_valid_one(). As a result, it is not necessary to check for this case in ipa_mem_config(). Finally, there is no need for IPA_MEM_UNDEFINED to be defined any more, so get rid of it. Signed-off-by: NAlex Elder <elder@linaro.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Alex Elder 提交于
Introduce a new function that abstracts finding information about a region in IPA-local memory, given its memory region ID. For now it simply uses the region ID as an index into the IPA memory array. If the region is not defined, ipa_mem_find() returns a null pointer. Update all code that accesses the ipa->mem[] array directly to use ipa_mem_find() instead. The return value must be checked for null when optional memory regions are sought. Signed-off-by: NAlex Elder <elder@linaro.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Alex Elder 提交于
Stop passing most of the Boolean flags to ipa_table_valid_one(), and just pass a memory region ID to it instead. We still need to indicate whether we're operating on a routing or filter table. Signed-off-by: NAlex Elder <elder@linaro.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Alex Elder 提交于
Pass a memory region ID rather than the address of a memory region descriptor to ipa_table_reset_add() to simplify callers. Similarly, pass memory region IDs to ipa_table_init_add(). Signed-off-by: NAlex Elder <elder@linaro.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Alex Elder 提交于
Pass a memory region ID rather than the address of a memory region descriptor to ipa_mem_zero_region_add() to simplify callers. Signed-off-by: NAlex Elder <elder@linaro.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Alex Elder 提交于
Pass a memory region ID rather than the address of a memory region descriptor to ipa_filter_reset_table(), to simplify callers. We can eliminate the check for a zero region size in this function because ipa_table_reset_add() checks that before adding anything to the transaction. Note that here and in subsequent commits there is no need to check whether a memory region exists, because we will have already verified that during initialization. Signed-off-by: NAlex Elder <elder@linaro.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Alex Elder 提交于
Do some general cleanup in ipa_cmd_header_valid(): - Delay assigning the mem variable until just before it's used. - Assign the maximum offset and size values together. - Improve comments explaining the single range of memory being made up of a modem portion and an AP portion. - Record the offset of the combined range in a local variable. - Do the initial size assignment right after assigning the offset. Signed-off-by: NAlex Elder <elder@linaro.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Alex Elder 提交于
Change ipa_mem_valid() to iterate over the entries using a u32 index variable rather than using a memory region ID. Use the ID found inside the memory descriptor rather than the loop index. Change ipa_mem_size_valid() to iterate over the entries but without assuming the array index is the memory region ID. "Empty" entries will have zero size; and we'll temporarily assume such entries have zero offset as well (they all do, currently). Similarly, don't assume the mem[] array is indexed by ID in ipa_mem_config(). There, "empty" entries will have a zero canary count, so no special assumptions are needed to handle them correctly. Signed-off-by: NAlex Elder <elder@linaro.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Cristobal Forno 提交于
Allow the device to be initialized at a later time if it is not available at boot. The device will be allowed to probe but will be given a "down" state. After completing device probe and registering the net device, the driver will await an interrupt signal from its partner device, indicating that it is ready for boot. The driver will schedule a work event to perform the necessary procedure and begin operation. Co-developed-by: NThomas Falcon <tlfalcon@linux.ibm.com> Signed-off-by: NThomas Falcon <tlfalcon@linux.ibm.com> Signed-off-by: NCristobal Forno <cforno12@linux.ibm.com> Acked-by: NLijun Pan <lijunp213@gmail.com> Reviewed-by: NDany Madden <drt@linux.ibm.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Serhiy Boiko 提交于
The following features are supported: - LAG basic operations - create/delete LAG - add/remove a member to LAG - enable/disable member in LAG - LAG Bridge support - LAG VLAN support - LAG FDB support Limitations: - Only HASH lag tx type is supported - The Hash parameters are not configurable. They are applied during the LAG creation stage. - Enslaving a port to the LAG device that already has an upper device is not supported. Co-developed-by: NAndrii Savka <andrii.savka@plvision.eu> Signed-off-by: NAndrii Savka <andrii.savka@plvision.eu> Signed-off-by: NSerhiy Boiko <serhiy.boiko@plvision.eu> Co-developed-by: NVadym Kochan <vkochan@marvell.com> Signed-off-by: NVadym Kochan <vkochan@marvell.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Vadym Kochan 提交于
Replace prestera_bridge_port_event(...) by prestera_bridge_port_join(...) and prestera_bridge_port_leave(). It simplifies the code by reading netdev event specific handling only once in prestera_main.c Signed-off-by: NVadym Kochan <vkochan@marvell.com> CC: Vladimir Oltean <olteanv@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Vadym Kochan 提交于
Move handling of PRECHANGEUPPER event from prestera_switchdev to prestera_main which is responsible for basic netdev events handling and routing them to related module. Signed-off-by: NVadym Kochan <vkochan@marvell.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Tan Zhongjun 提交于
The platform_get_irq() prints error message telling that interrupt is missing,hence there is no need to duplicated that message in the drivers. Signed-off-by: NTan Zhongjun <tanzhongjun@yulong.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Wang Hai 提交于
Convert list_for_each() to list_for_each_entry() where applicable. This simplifies the code. Reported-by: NHulk Robot <hulkci@huawei.com> Signed-off-by: NWang Hai <wanghai38@huawei.com> Acked-by: NLijun Pan <lijunp213@gmail.com> Reviewed-by: NDany Madden <drt@linux.ibm.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Yang Yingliang 提交于
Use devm_platform_get_and_ioremap_resource() to simplify code. Signed-off-by: NYang Yingliang <yangyingliang@huawei.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Yang Yingliang 提交于
Use devm_platform_get_and_ioremap_resource() to simplify code and avoid a null-ptr-deref by checking 'res' in it. Signed-off-by: NYang Yingliang <yangyingliang@huawei.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Wong Vee Khee 提交于
The commit 5a558611 ("net: stmmac: support FPE link partner hand-shaking procedure") introduced the following coverity warning: "Parse warning (PW.MIXED_ENUM_TYPE)" "1. mixed_enum_type: enumerated type mixed with another type" This is due to both "lo_state" and "lp_sate" which their datatype are enum stmmac_fpe_state type, and being assigned with "FPE_EVENT_UNKNOWN" which is a macro-defined of 0. Fixed this by assigned both these variables with the correct enum value. Fixes: 5a558611 ("net: stmmac: support FPE link partner hand-shaking procedure") Signed-off-by: NWong Vee Khee <vee.khee.wong@linux.intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Yang Yingliang 提交于
It will cause null-ptr-deref if platform_get_resource() returns NULL, we need check the return value. Signed-off-by: NYang Yingliang <yangyingliang@huawei.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Yang Yingliang 提交于
Use devm_platform_get_and_ioremap_resource() to simplify code. Signed-off-by: NYang Yingliang <yangyingliang@huawei.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Yang Yingliang 提交于
Use devm_platform_get_and_ioremap_resource() to simplify code. Signed-off-by: NYang Yingliang <yangyingliang@huawei.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Peng Li 提交于
Braces {} should be used on all arms of this statement. Signed-off-by: NPeng Li <lipeng321@huawei.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Peng Li 提交于
Networking block comments don't use an empty /* line, use /* Comment... Block comments use * on subsequent lines. Block comments use a trailing */ on a separate line. This patch fixes the comments style issues. Signed-off-by: NPeng Li <lipeng321@huawei.com> Signed-off-by: NGuangbin Huang <huangguangbin2@huawei.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Peng Li 提交于
According to the chackpatch.pl, space prohibited after that open parenthesis '('. Signed-off-by: NPeng Li <lipeng321@huawei.com> Signed-off-by: NGuangbin Huang <huangguangbin2@huawei.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Peng Li 提交于
Add space required before the open parenthesis '('. Add space required after that close brace '}'. Signed-off-by: NPeng Li <lipeng321@huawei.com> Signed-off-by: NGuangbin Huang <huangguangbin2@huawei.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Peng Li 提交于
Should not use assignment in if condition. Signed-off-by: NPeng Li <lipeng321@huawei.com> Signed-off-by: NGuangbin Huang <huangguangbin2@huawei.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-