Constants used for tuning are generally a bad idea, especially as hardware
changes over time. Replace the constant 2 jiffies with sysctl variable
netdev_budget_usecs to enable sysadmins to tune the softirq processing.
Also document the variable.

For example, a very fast machine might tune this to 1000 microseconds,
while my regression testing 486DX-25 needs it to be 4000 microseconds on
a nearly idle network to prevent time_squeeze from being incremented.

Version 2: changed jiffies to microseconds for predictable units.
Signed-off-by: NMatthew Whitehead <tedheadster@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

To find out if a netdev is an OVS port.
Signed-off-by: NJiri Pirko <jiri@mellanox.com>
Reviewed-by: NIdo Schimmel <idosch@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch adds all the bits that are needed to do
IPsec hardware offload for IPsec states and ESP packets.
We add xfrmdev_ops to the net_device. xfrmdev_ops has
function pointers that are needed to manage the xfrm
states in the hardware and to do a per packet
offloading decision.

Joint work with:
Ilan Tayari <ilant@mellanox.com>
Guy Shapiro <guysh@mellanox.com>
Yossi Kuperman <yossiku@mellanox.com>
Signed-off-by: NGuy Shapiro <guysh@mellanox.com>
Signed-off-by: NIlan Tayari <ilant@mellanox.com>
Signed-off-by: NYossi Kuperman <yossiku@mellanox.com>
Signed-off-by: NSteffen Klassert <steffen.klassert@secunet.com>

This patch adds netdev features to configure IPsec offloads.
Signed-off-by: NSteffen Klassert <steffen.klassert@secunet.com>

This field is never big enough to warrant 16-bitness.

8-bit accesses enjoy shorted encoding on i386/x86_64 than 16-bit
accesses:

	add/remove: 0/0 grow/shrink: 0/2 up/down: 0/-10 (-10)
	function                                     old     new   delta
	loopback_setup                               169     164      -5
	ether_setup                                  148     143      -5
Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Using 16-bit ->hh_len doesn't save any memory, save some .text instead:

	add/remove: 0/0 grow/shrink: 1/6 up/down: 2/-19 (-17)
	function                                     old     new   delta
	neigh_update                                2312    2314      +2
	fwnet_header_cache                           199     197      -2
	eth_header_cache                             101      99      -2
	ip6_finish_output2                          2371    2368      -3
	vrf_finish_output6                          1522    1518      -4
	vrf_finish_output                           1413    1409      -4
	ip_finish_output2                           1627    1623      -4
Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

There is an include loop between netdevice.h, dsa.h, devlink.h because
of NETDEV_ALIGN, making it impossible to use devlink structures in
dsa.h.

Break this loop by taking dsa.h out of netdevice.h, add a forward
declaration of dsa_switch_tree and netdev_set_default_ethtool_ops()
function, which is what netdevice.h requires.

No longer having dsa.h in netdevice.h means the includes in dsa.h no
longer get included. This breaks a few other files which depend on
these includes. Add these directly in the affected file.
Signed-off-by: NAndrew Lunn <andrew@lunn.ch>
Reviewed-by: NFlorian Fainelli <f.fainelli@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The configurable priority to traffic class mapping and the user specified
queue ranges are used to configure the traffic class, overriding the
hardware defaults when the 'hw' option is set to 0. However, when the 'hw'
option is non-zero, the hardware QOS defaults are used.

This patch makes it so that we can pass the data the user provided to
ndo_setup_tc. This allows us to pull in the queue configuration if the
user requested it as well as any additional hardware offload type
requested by using a value other than 1 for the hw value.

Finally it also provides a means for the device driver to return the level
supported for the offload type via the qopt->hw value. Previously we were
just always assuming the value to be 1, in the future values beyond just 1
may be supported.
Signed-off-by: NAmritha Nambiar <amritha.nambiar@intel.com>
Signed-off-by: NAlexander Duyck <alexander.h.duyck@intel.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

While playing with mlx4 hardware timestamping of RX packets, I found
that some packets were received by TCP stack with a ~200 ms delay...

Since the timestamp was provided by the NIC, and my probe was added
in tcp_v4_rcv() while in BH handler, I was confident it was not
a sender issue, or a drop in the network.

This would happen with a very low probability, but hurting RPC
workloads.

A NAPI driver normally arms the IRQ after the napi_complete_done(),
after NAPI_STATE_SCHED is cleared, so that the hard irq handler can grab
it.

Problem is that if another point in the stack grabs NAPI_STATE_SCHED bit
while IRQ are not disabled, we might have later an IRQ firing and
finding this bit set, right before napi_complete_done() clears it.

This can happen with busy polling users, or if gro_flush_timeout is
used. But some other uses of napi_schedule() in drivers can cause this
as well.

thread 1                                 thread 2 (could be on same cpu, or not)

// busy polling or napi_watchdog()
napi_schedule();
...
napi->poll()

device polling:
read 2 packets from ring buffer
                                          Additional 3rd packet is
available.
                                          device hard irq

                                          // does nothing because
NAPI_STATE_SCHED bit is owned by thread 1
                                          napi_schedule();

napi_complete_done(napi, 2);
rearm_irq();

Note that rearm_irq() will not force the device to send an additional
IRQ for the packet it already signaled (3rd packet in my example)

This patch adds a new NAPI_STATE_MISSED bit, that napi_schedule_prep()
can set if it could not grab NAPI_STATE_SCHED

Then napi_complete_done() properly reschedules the napi to make sure
we do not miss something.

Since we manipulate multiple bits at once, use cmpxchg() like in
sk_busy_loop() to provide proper transactions.

In v2, I changed napi_watchdog() to use a relaxed variant of
napi_schedule_prep() : No need to set NAPI_STATE_MISSED from this point.

In v3, I added more details in the changelog and clears
NAPI_STATE_MISSED in busy_poll_stop()

In v4, I added the ideas given by Alexander Duyck in v3 review
Signed-off-by: NEric Dumazet <edumazet@google.com>
Cc: Alexander Duyck <alexander.duyck@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The upcomming IPsec ESP gro callbacks will consume the skb,
so prepare for that.
Signed-off-by: NSteffen Klassert <steffen.klassert@secunet.com>

Add a skb_gro_flush_final helper to prepare for  consuming
skbs in call_gro_receive. We will extend this helper to not
touch the skb if the skb is consumed by a gro callback with
a followup patch. We need this to handle the upcomming IPsec
ESP callbacks as they reinject the skb to the napi_gro_receive
asynchronous. The handler is used in all gro_receive functions
that can call the ESP gro handlers.
Signed-off-by: NSteffen Klassert <steffen.klassert@secunet.com>

garp_port is only used in net/802/garp.c which is only compiled with
CONFIG_GARP enabled. Same goes for mrp_port which is only used in
net/802/mrp.c with CONFIG_MRP enabled.

Only include the two members in struct net_device if their respective
CONFIG_* is enabled. This saves a few bytes in struct net_device in case
CONFIG_GARP or CONFIG_MRP are not enabled.
Signed-off-by: NTobias Klauser <tklauser@distanz.ch>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The stack must not pass packets to device drivers that are shorter
than the minimum link layer header length.

Previously, packet sockets would drop packets smaller than or equal
to dev->hard_header_len, but this has false positives. Zero length
payload is used over Ethernet. Other link layer protocols support
variable length headers. Support for validation of these protocols
removed the min length check for all protocols.

Introduce an explicit dev->min_header_len parameter and drop all
packets below this value. Initially, set it to non-zero only for
Ethernet and loopback. Other protocols can follow in a patch to
net-next.

Fixes: 9ed988cd ("packet: validate variable length ll headers")
Reported-by: NSowmini Varadhan <sowmini.varadhan@oracle.com>
Signed-off-by: NWillem de Bruijn <willemb@google.com>
Acked-by: NEric Dumazet <edumazet@google.com>
Acked-by: NSowmini Varadhan <sowmini.varadhan@oracle.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

In commit 18bfb924 ("net: introduce default neigh_construct/destroy
ndo calls for L2 upper devices") we added these ndos to stacked devices
such as team and bond, so that calls will be propagated to mlxsw.

However, previous commit removed the reliance on these ndos and no new
users of these ndos have appeared since above mentioned commit. We can
therefore safely remove this dead code.
Signed-off-by: NIdo Schimmel <idosch@mellanox.com>
Signed-off-by: NJiri Pirko <jiri@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

All __napi_complete() callers have been converted to
use the more standard napi_complete_done(),
we can now remove this NAPI method for good.
Signed-off-by: NEric Dumazet <edumazet@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

We added generic support for busy polling in NAPI layer in linux-4.5

No network driver uses ndo_busy_poll() anymore, we can get rid
of the pointer in struct net_device_ops, and its use in sk_busy_loop()

Saves NETIF_F_BUSY_POLL features bit.
Signed-off-by: NEric Dumazet <edumazet@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Commit cdba756f ("net: move ndo_features_check() close to
ndo_start_xmit()") inadvertently moved the doc comment for
.ndo_fix_features instead of .ndo_features_check. Fix the comment
ordering.

Fixes: cdba756f ("net: move ndo_features_check() close to ndo_start_xmit()")
Signed-off-by: NDimitris Michailidis <dmichail@google.com>
Acked-by: NEric Dumazet <edumazet@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

For reporting things that may or may not be serious, depending on some
 condition, netif_cond_dbg will check the condition and print the report
 at either dbg (if the condition is true) or the specified level.
Suggested-by: NJon Cooper <jcooper@solarflare.com>
Signed-off-by: NEdward Cree <ecree@solarflare.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Commit 16e5cc64 ("net: rework setup_tc ndo op to consume
general tc operand") changed the ndo_setup_tc() signature, but did not
update the comments in netdevice.h, so do that now.
Signed-off-by: NFlorian Fainelli <f.fainelli@gmail.com>
Acked-by: NJohn Fastabend <john.r.fastabend@intel.com>
Reviewed-by: NJiri Pirko <jiri@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The network stack no longer uses the last_rx member of struct net_device
since the bonding driver switched to use its own private last_rx in
commit 9f242738 ("bonding: use last_arp_rx in slave_last_rx()").

However, some drivers still (ab)use the field for their own purposes and
some driver just update it without actually using it.

Previously, there was an accompanying comment for the last_rx member
added in commit 4dc89133 ("net: add a comment on netdev->last_rx")
which asked drivers not to update is, unless really needed. However,
this commend was removed in commit f8ff080d ("bonding: remove
useless updating of slave->dev->last_rx"), so some drivers added later
on still did update last_rx.

Remove all usage of last_rx and switch three drivers (sky2, atp and
smc91c92_cs) which actually read and write it to use their own private
copy in netdev_priv.

Compile-tested with allyesconfig and allmodconfig on x86 and arm.

Cc: Eric Dumazet <eric.dumazet@gmail.com>
Cc: Jay Vosburgh <j.vosburgh@gmail.com>
Cc: Veaceslav Falico <vfalico@gmail.com>
Cc: Andy Gospodarek <andy@greyhouse.net>
Cc: Mirko Lindner <mlindner@marvell.com>
Cc: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: NTobias Klauser <tklauser@distanz.ch>
Acked-by: NEric Dumazet <edumazet@google.com>
Reviewed-by: NJay Vosburgh <jay.vosburgh@canonical.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

netif_wake_subqueue() is duplicating the same thing that netif_tx_wake_queue()
does, so make it call it directly after looking up the queue from the index.
Signed-off-by: NFlorian Fainelli <f.fainelli@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The GRO fast path caches the frag0 address.  This address becomes
invalid if frag0 is modified by pskb_may_pull or its variants.
So whenever that happens we must disable the frag0 optimization.

This is usually done through the combination of gro_header_hard
and gro_header_slow, however, the IPv6 extension header path did
the pulling directly and would continue to use the GRO fast path
incorrectly.

This patch fixes it by disabling the fast path when we enter the
IPv6 extension header path.

Fixes: 78a478d0 ("gro: Inline skb_gro_header and cache frag0 virtual address")
Reported-by: NSlava Shwartsman <slavash@mellanox.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: NEric Dumazet <edumazet@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The network device operation for reading statistics is only called
in one place, and it ignores the return value. Having a structure
return value is potentially confusing because some future driver could
incorrectly assume that the return value was used.

Fix all drivers with ndo_get_stats64 to have a void function.
Signed-off-by: NStephen Hemminger <sthemmin@microsoft.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Oftenly, introducing side effects on packet processing on the other half
of the stack by adjusting one of TX/RX via sysctl is not desirable.
There are cases of demand for asymmetric, orthogonal configurability.

This holds true especially for nodes where RPS for RFS usage on top is
configured and therefore use the 'old dev_weight'. This is quite a
common base configuration setup nowadays, even with NICs of superior processing
support (e.g. aRFS).

A good example use case are nodes acting as noSQL data bases with a
large number of tiny requests and rather fewer but large packets as responses.
It's affordable to have large budget and rx dev_weights for the
requests. But as a side effect having this large a number on TX
processed in one run can overwhelm drivers.

This patch therefore introduces an independent configurability via sysctl to
userland.
Signed-off-by: NMatthias Tafelmeier <matthias.tafelmeier@gmx.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

RFS is not commonly used, so add a jump label to avoid some conditionals
in fast path.
Signed-off-by: NEric Dumazet <edumazet@google.com>
Cc: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

In order to support hardware offloading when the device given by the tc
rule is different from the Hardware underline device, extract the mirred
(egress) device from the tc action when a filter is added, using the new
tc_action_ops, get_dev().

Flower caches the information about the mirred device and use it for
calling ndo_setup_tc in filter change, update stats and delete.

Calling ndo_setup_tc of the mirred (egress) device instead of the
ingress device will allow a resolution between the software ingress
device and the underline hardware device.

The resolution will take place inside the offloading driver using
'egress_device' flag added to tc_to_netdev struct which is provided to
the offloading driver.
Signed-off-by: NHadar Hen Zion <hadarh@mellanox.com>
Acked-by: NJiri Pirko <jiri@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Add an IFLA_XDP_FLAGS attribute that can be passed for setting up
XDP along with IFLA_XDP_FD, which eventually allows user space to
implement typical add/replace/delete logic for programs. Right now,
calling into dev_change_xdp_fd() will always replace previous programs.

When passed XDP_FLAGS_UPDATE_IF_NOEXIST, we can handle this more
graceful when requested by returning -EBUSY in case we try to
attach a new program, but we find that another one is already
attached. This will be used by upcoming front-end for iproute2 as
well.
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>
Acked-by: NAlexei Starovoitov <ast@kernel.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

sparse warns about context imbalance in any code
that uses HARD_TX_LOCK/UNLOCK - this is because it's
unable to determine that flags don't change so
lock and unlock are paired.

Seems easy enough to fix by adding __acquire/__release
calls.

With this patch af_packet.c is now sparse-clean,
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Some drivers would need to check few internal matters for
that. To be used in downstream mlx5 commit.
Signed-off-by: NOr Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Fix kernel-doc warning in <linux/netdevice.h> (missing ':'):

..//include/linux/netdevice.h:1904: warning: No description found for parameter 'prio_tc_map[TC_BITMASK + 1]'
Signed-off-by: NRandy Dunlap <rdunlap@infradead.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Callers of netpoll_poll_lock() own NAPI_STATE_SCHED

Callers of netpoll_poll_unlock() have BH blocked between
the NAPI_STATE_SCHED being cleared and poll_lock is released.

We can avoid the spinlock which has no contention, and use cmpxchg()
on poll_owner which we need to set anyway.

This removes a possible lockdep violation after the cited commit,
since sk_busy_loop() re-enables BH before calling busy_poll_stop()

Fixes: 217f6974 ("net: busy-poll: allow preemption in sk_busy_loop()")
Signed-off-by: NEric Dumazet <edumazet@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

NAPI drivers use napi_complete_done() or napi_complete() when
they drained RX ring and right before re-enabling device interrupts.

In busy polling, we can avoid interrupts being delivered since
we are polling RX ring in a controlled loop.

Drivers can chose to use napi_complete_done() return value
to reduce interrupts overhead while busy polling is active.

This is optional, legacy drivers should work fine even
if not updated.
Signed-off-by: NEric Dumazet <edumazet@google.com>
Cc: Willem de Bruijn <willemb@google.com>
Cc: Adam Belay <abelay@google.com>
Cc: Tariq Toukan <tariqt@mellanox.com>
Cc: Yuval Mintz <Yuval.Mintz@cavium.com>
Cc: Ariel Elior <ariel.elior@cavium.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

After commit 4cd13c21 ("softirq: Let ksoftirqd do its job"),
sk_busy_loop() needs a bit of care :
softirqs might be delayed since we do not allow preemption yet.

This patch adds preemptiom points in sk_busy_loop(),
and makes sure no unnecessary cache line dirtying
or atomic operations are done while looping.

A new flag is added into napi->state : NAPI_STATE_IN_BUSY_POLL

This prevents napi_complete_done() from clearing NAPIF_STATE_SCHED,
so that sk_busy_loop() does not have to grab it again.

Similarly, netpoll_poll_lock() is done one time.

This gives about 10 to 20 % improvement in various busy polling
tests, especially when many threads are busy polling in
configurations with large number of NIC queues.

This should allow experimenting with bigger delays without
hurting overall latencies.

Tested:
 On a 40Gb mlx4 NIC, 32 RX/TX queues.

 echo 70 >/proc/sys/net/core/busy_read
 for i in `seq 1 40`; do echo -n $i: ; ./super_netperf $i -H lpaa24 -t UDP_RR -- -N -n; done

    Before:      After:
 1:   90072   92819
 2:  157289  184007
 3:  235772  213504
 4:  344074  357513
 5:  394755  458267
 6:  461151  487819
 7:  549116  625963
 8:  544423  716219
 9:  720460  738446
10:  794686  837612
11:  915998  923960
12:  937507  925107
13: 1019677  971506
14: 1046831 1113650
15: 1114154 1148902
16: 1105221 1179263
17: 1266552 1299585
18: 1258454 1383817
19: 1341453 1312194
20: 1363557 1488487
21: 1387979 1501004
22: 1417552 1601683
23: 1550049 1642002
24: 1568876 1601915
25: 1560239 1683607
26: 1640207 1745211
27: 1706540 1723574
28: 1638518 1722036
29: 1734309 1757447
30: 1782007 1855436
31: 1724806 1888539
32: 1717716 1944297
33: 1778716 1869118
34: 1805738 1983466
35: 1815694 2020758
36: 1893059 2035632
37: 1843406 2034653
38: 1888830 2086580
39: 1972827 2143567
40: 1877729 2181851
Signed-off-by: NEric Dumazet <edumazet@google.com>
Cc: Willem de Bruijn <willemb@google.com>
Cc: Adam Belay <abelay@google.com>
Cc: Tariq Toukan <tariqt@mellanox.com>
Cc: Yuval Mintz <Yuval.Mintz@cavium.com>
Cc: Ariel Elior <ariel.elior@cavium.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

If the bpf program calls bpf_redirect(dev, 0) and dev is
an ipip/ip6tnl, it currently includes the mac header.
e.g. If dev is ipip, the end result is IP-EthHdr-IP instead
of IP-IP.

The fix is to pull the mac header.  At ingress, skb_postpull_rcsum()
is not needed because the ethhdr should have been pulled once already
and then got pushed back just before calling the bpf_prog.
At egress, this patch calls skb_postpull_rcsum().

If bpf_redirect(dev, BPF_F_INGRESS) is called,
it also fails now because it calls dev_forward_skb() which
eventually calls eth_type_trans(skb, dev).  The eth_type_trans()
will set skb->type = PACKET_OTHERHOST because the mac address
does not match the redirecting dev->dev_addr.  The PACKET_OTHERHOST
will eventually cause the ip_rcv() errors out.  To fix this,
____dev_forward_skb() is added.

Joint work with Daniel Borkmann.

Fixes: cfc7381b ("ip_tunnel: add collect_md mode to IPIP tunnel")
Fixes: 8d79266b ("ip6_tunnel: add collect_md mode to IPv6 tunnels")
Acked-by: NDaniel Borkmann <daniel@iogearbox.net>
Acked-by: NAlexei Starovoitov <ast@fb.com>
Signed-off-by: NMartin KaFai Lau <kafai@fb.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

There are no more users except from net/core/dev.c
napi_hash_add() can now be static.
Signed-off-by: NEric Dumazet <edumazet@google.com>
Cc: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch adds support for setting and using XPS when QoS via traffic
classes is enabled.  With this change we will factor in the priority and
traffic class mapping of the packet and use that information to correctly
select the queue.

This allows us to define a set of queues for a given traffic class via
mqprio and then configure the XPS mapping for those queues so that the
traffic flows can avoid head-of-line blocking between the individual CPUs
if so desired.
Signed-off-by: NAlexander Duyck <alexander.h.duyck@intel.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Add a sysfs attribute for a Tx queue that allows us to determine the
traffic class for a given queue.  This will allow us to more easily
determine this in the future.  It is needed as XPS will take the traffic
class for a group of queues into account in order to avoid pulling traffic
from one traffic class into another.
Signed-off-by: NAlexander Duyck <alexander.h.duyck@intel.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The functions for configuring the traffic class to queue mappings have
other effects that need to be addressed.  Instead of trying to export a
bunch of new functions just relocate the functions so that we can
instrument them directly with the functionality they will need.
Signed-off-by: NAlexander Duyck <alexander.h.duyck@intel.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Currently, GRO can do unlimited recursion through the gro_receive
handlers.  This was fixed for tunneling protocols by limiting tunnel GRO
to one level with encap_mark, but both VLAN and TEB still have this
problem.  Thus, the kernel is vulnerable to a stack overflow, if we
receive a packet composed entirely of VLAN headers.

This patch adds a recursion counter to the GRO layer to prevent stack
overflow.  When a gro_receive function hits the recursion limit, GRO is
aborted for this skb and it is processed normally.  This recursion
counter is put in the GRO CB, but could be turned into a percpu counter
if we run out of space in the CB.

Thanks to Vladimír Beneš <vbenes@redhat.com> for the initial bug report.

Fixes: CVE-2016-7039
Fixes: 9b174d88 ("net: Add Transparent Ethernet Bridging GRO support.")
Fixes: 66e5133f ("vlan: Add GRO support for non hardware accelerated vlan")
Signed-off-by: NSabrina Dubroca <sd@queasysnail.net>
Reviewed-by: NJiri Benc <jbenc@redhat.com>
Acked-by: NHannes Frederic Sowa <hannes@stressinduktion.org>
Acked-by: NTom Herbert <tom@herbertland.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Tamir reported the following trace when processing ARP requests received
via a vlan device on top of a VLAN-aware bridge:

 NMI watchdog: BUG: soft lockup - CPU#1 stuck for 22s! [swapper/1:0]
[...]
 CPU: 1 PID: 0 Comm: swapper/1 Tainted: G        W       4.8.0-rc7 #1
 Hardware name: Mellanox Technologies Ltd. "MSN2100-CB2F"/"SA001017", BIOS 5.6.5 06/07/2016
 task: ffff88017edfea40 task.stack: ffff88017ee10000
 RIP: 0010:[<ffffffff815dcc73>]  [<ffffffff815dcc73>] netdev_all_lower_get_next_rcu+0x33/0x60
[...]
 Call Trace:
  <IRQ>
  [<ffffffffa015de0a>] mlxsw_sp_port_lower_dev_hold+0x5a/0xa0 [mlxsw_spectrum]
  [<ffffffffa016f1b0>] mlxsw_sp_router_netevent_event+0x80/0x150 [mlxsw_spectrum]
  [<ffffffff810ad07a>] notifier_call_chain+0x4a/0x70
  [<ffffffff810ad13a>] atomic_notifier_call_chain+0x1a/0x20
  [<ffffffff815ee77b>] call_netevent_notifiers+0x1b/0x20
  [<ffffffff815f2eb6>] neigh_update+0x306/0x740
  [<ffffffff815f38ce>] neigh_event_ns+0x4e/0xb0
  [<ffffffff8165ea3f>] arp_process+0x66f/0x700
  [<ffffffff8170214c>] ? common_interrupt+0x8c/0x8c
  [<ffffffff8165ec29>] arp_rcv+0x139/0x1d0
  [<ffffffff816e505a>] ? vlan_do_receive+0xda/0x320
  [<ffffffff815e3794>] __netif_receive_skb_core+0x524/0xab0
  [<ffffffff815e6830>] ? dev_queue_xmit+0x10/0x20
  [<ffffffffa06d612d>] ? br_forward_finish+0x3d/0xc0 [bridge]
  [<ffffffffa06e5796>] ? br_handle_vlan+0xf6/0x1b0 [bridge]
  [<ffffffff815e3d38>] __netif_receive_skb+0x18/0x60
  [<ffffffff815e3dc0>] netif_receive_skb_internal+0x40/0xb0
  [<ffffffff815e3e4c>] netif_receive_skb+0x1c/0x70
  [<ffffffffa06d7856>] br_pass_frame_up+0xc6/0x160 [bridge]
  [<ffffffffa06d63d7>] ? deliver_clone+0x37/0x50 [bridge]
  [<ffffffffa06d656c>] ? br_flood+0xcc/0x160 [bridge]
  [<ffffffffa06d7b14>] br_handle_frame_finish+0x224/0x4f0 [bridge]
  [<ffffffffa06d7f94>] br_handle_frame+0x174/0x300 [bridge]
  [<ffffffff815e3599>] __netif_receive_skb_core+0x329/0xab0
  [<ffffffff81374815>] ? find_next_bit+0x15/0x20
  [<ffffffff8135e802>] ? cpumask_next_and+0x32/0x50
  [<ffffffff810c9968>] ? load_balance+0x178/0x9b0
  [<ffffffff815e3d38>] __netif_receive_skb+0x18/0x60
  [<ffffffff815e3dc0>] netif_receive_skb_internal+0x40/0xb0
  [<ffffffff815e3e4c>] netif_receive_skb+0x1c/0x70
  [<ffffffffa01544a1>] mlxsw_sp_rx_listener_func+0x61/0xb0 [mlxsw_spectrum]
  [<ffffffffa005c9f7>] mlxsw_core_skb_receive+0x187/0x200 [mlxsw_core]
  [<ffffffffa007332a>] mlxsw_pci_cq_tasklet+0x63a/0x9b0 [mlxsw_pci]
  [<ffffffff81091986>] tasklet_action+0xf6/0x110
  [<ffffffff81704556>] __do_softirq+0xf6/0x280
  [<ffffffff8109213f>] irq_exit+0xdf/0xf0
  [<ffffffff817042b4>] do_IRQ+0x54/0xd0
  [<ffffffff8170214c>] common_interrupt+0x8c/0x8c

The problem is that netdev_all_lower_get_next_rcu() never advances the
iterator, thereby causing the loop over the lower adjacency list to run
forever.

Fix this by advancing the iterator and avoid the infinite loop.

Fixes: 7ce856aa ("mlxsw: spectrum: Add couple of lower device helper functions")
Signed-off-by: NIdo Schimmel <idosch@mellanox.com>
Reported-by: NTamir Winetroub <tamirw@mellanox.com>
Reviewed-by: NJiri Pirko <jiri@mellanox.com>
Acked-by: NDavid Ahern <dsa@cumulusnetworks.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>