Instead of iterating through all instructions to find the last
instruction each time .rela.discard.(un)reachable points beyond the
section, use find_insn to locate the last instruction by looking at
the last bytes of the section instead.
Suggested-by: NJosh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: NSami Tolvanen <samitolvanen@google.com>
Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20200421220843.188260-3-samitolvanen@google.com

Randy reported a false-positive:

  arch/x86/hyperv/hv_apic.o: warning: objtool: hv_apic_write()+0x25: alternative modifies stack

What happens is that:

	alternative_io("movl %0, %P1", "xchgl %0, %P1", X86_BUG_11AP,
 13d:   89 9d 00 d0 7f ff       mov    %ebx,-0x803000(%rbp)

decodes to an instruction with CFI-ops because it modifies RBP.
However, due to this being a !frame-pointer build, that should not in
fact change the CFI state.

So instead of dis-allowing any CFI-op, verify the op would've actually
changed the CFI state.

Fixes: 7117f16b ("objtool: Fix ORC vs alternatives")
Reported-by: NRandy Dunlap <rdunlap@infradead.org>
Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: NJosh Poimboeuf <jpoimboe@redhat.com>
Acked-by: NRandy Dunlap <rdunlap@infradead.org>
Tested-by: NRandy Dunlap <rdunlap@infradead.org>

Change objtool to support intra-function calls. On x86, an intra-function
call is represented in objtool as a push onto the stack (of the return
address), and a jump to the destination address. That way the stack
information is correctly updated and the call flow is still accurate.
Signed-off-by: NAlexandre Chartre <alexandre.chartre@oracle.com>
Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: NMiroslav Benes <mbenes@suse.cz>
Acked-by: NJosh Poimboeuf <jpoimboe@redhat.com>
Link: https://lkml.kernel.org/r/20200414103618.12657-4-alexandre.chartre@oracle.com

Quoting Julien:

  "And the other suggestion is my other email was that you don't even
  need to add INSN_EXCEPTION_RETURN. You can keep IRET as
  INSN_CONTEXT_SWITCH by default and x86 decoder lookups the symbol
  conaining an iret. If it's a function symbol, it can just set the type
  to INSN_OTHER so that it caries on to the next instruction after
  having handled the stack_op."
Suggested-by: NJulien Thierry <jthierry@redhat.com>
Signed-off-by: NMiroslav Benes <mbenes@suse.cz>
Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: NMiroslav Benes <mbenes@suse.cz>
Acked-by: NJosh Poimboeuf <jpoimboe@redhat.com>
Link: https://lkml.kernel.org/r/20200428191659.913283807@infradead.org

With the unconditional use of handle_insn_ops(), INSN_STACK has lost
its purpose. Remove it.
Suggested-by: NJulien Thierry <jthierry@redhat.com>
Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: NMiroslav Benes <mbenes@suse.cz>
Acked-by: NJosh Poimboeuf <jpoimboe@redhat.com>
Link: https://lkml.kernel.org/r/20200428191659.854203028@infradead.org

Now that every instruction has a list of stack_ops; we can trivially
distinquish those instructions that do not have stack_ops, their list
is empty.

This means we can now call handle_insn_ops() unconditionally.
Suggested-by: NJulien Thierry <jthierry@redhat.com>
Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: NMiroslav Benes <mbenes@suse.cz>
Acked-by: NJosh Poimboeuf <jpoimboe@redhat.com>
Link: https://lkml.kernel.org/r/20200428191659.795115188@infradead.org

UNWIND_HINT_RET_OFFSET will adjust a modified stack. However if a
callee-saved register was pushed on the stack then the stack frame
will still appear modified. So stop checking registers when
UNWIND_HINT_RET_OFFSET is used.
Signed-off-by: NAlexandre Chartre <alexandre.chartre@oracle.com>
Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: NMiroslav Benes <mbenes@suse.cz>
Acked-by: NJosh Poimboeuf <jpoimboe@redhat.com>
Link: https://lkml.kernel.org/r/20200407073142.20659-3-alexandre.chartre@oracle.com

Fix is_fentry_call() so that it works if a call has no destination
set (call_dest). This needs to be done in order to support intra-
function calls.
Signed-off-by: NAlexandre Chartre <alexandre.chartre@oracle.com>
Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: NMiroslav Benes <mbenes@suse.cz>
Acked-by: NJosh Poimboeuf <jpoimboe@redhat.com>
Link: https://lkml.kernel.org/r/20200414103618.12657-2-alexandre.chartre@oracle.com

Jann reported that (for instance) entry_64.o:general_protection has
very odd ORC data:

  0000000000000f40 <general_protection>:
  #######sp:sp+8 bp:(und) type:iret end:0
    f40:       90                      nop
  #######sp:(und) bp:(und) type:call end:0
    f41:       90                      nop
    f42:       90                      nop
  #######sp:sp+8 bp:(und) type:iret end:0
    f43:       e8 a8 01 00 00          callq  10f0 <error_entry>
  #######sp:sp+0 bp:(und) type:regs end:0
    f48:       f6 84 24 88 00 00 00    testb  $0x3,0x88(%rsp)
    f4f:       03
    f50:       74 00                   je     f52 <general_protection+0x12>
    f52:       48 89 e7                mov    %rsp,%rdi
    f55:       48 8b 74 24 78          mov    0x78(%rsp),%rsi
    f5a:       48 c7 44 24 78 ff ff    movq   $0xffffffffffffffff,0x78(%rsp)
    f61:       ff ff
    f63:       e8 00 00 00 00          callq  f68 <general_protection+0x28>
    f68:       e9 73 02 00 00          jmpq   11e0 <error_exit>
  #######sp:(und) bp:(und) type:call end:0
    f6d:       0f 1f 00                nopl   (%rax)

Note the entry at 0xf41. Josh found this was the result of commit:

  764eef4b ("objtool: Rewrite alt->skip_orig")

Due to the early return in validate_branch() we no longer set
insn->cfi of the original instruction stream (the NOPs at 0xf41 and
0xf42) and we'll end up with the above weirdness.

In other discussions we realized alternatives should be ORC invariant;
that is, due to there being only a single ORC table, it must be valid
for all alternatives. The easiest way to ensure this is to not allow
any stack modifications in alternatives.

When we enforce this latter observation, we get the property that the
whole alternative must have the same CFI, which we can employ to fix
the former report.

Fixes: 764eef4b ("objtool: Rewrite alt->skip_orig")
Reported-by: NJann Horn <jannh@google.com>
Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: NMiroslav Benes <mbenes@suse.cz>
Acked-by: NJosh Poimboeuf <jpoimboe@redhat.com>
Link: https://lkml.kernel.org/r/20200428191659.499074346@infradead.org

Assign a unique identifier to every alternative instruction group in
order to be able to tell which instructions belong to what
alternative.

[peterz: extracted from a larger patch]
Signed-off-by: NAlexandre Chartre <alexandre.chartre@oracle.com>
Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: NMiroslav Benes <mbenes@suse.cz>

While jumping from outside an alternative region to the middle of an
alternative region is very likely wrong, jumping from an alternative
region into the same region is valid. It is a common pattern on arm64.

The first pattern is unlikely to happen in practice and checking only
for this adds a lot of complexity.

Just remove the current check.
Suggested-by: NJosh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: NJulien Thierry <jthierry@redhat.com>
Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: NMiroslav Benes <mbenes@suse.cz>
Link: https://lkml.kernel.org/r/20200327152847.15294-6-jthierry@redhat.com

'struct elf *' handling is an open/close paradigm, make sure the naming
matches that:

   elf_open_read()
   elf_write()
   elf_close()
Acked-by: NJosh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: NIngo Molnar <mingo@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sami Tolvanen <samitolvanen@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20200422103205.61900-3-mingo@kernel.org

Consider all of .entry.text as noinstr. This gets us coverage across
the PTI boundary. While we could add everything .noinstr.text into
.entry.text that would bloat the amount of code in the user mapping.
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: NMiroslav Benes <mbenes@suse.cz>
Reviewed-by: NAlexandre Chartre <alexandre.chartre@oracle.com>
Acked-by: NJosh Poimboeuf <jpoimboe@redhat.com>
Link: https://lkml.kernel.org/r/20200416115119.525037514@infradead.orgSigned-off-by: NIngo Molnar <mingo@kernel.org>

Make sure to also check STT_NOTYPE symbols for noinstr violations.
Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: NMiroslav Benes <mbenes@suse.cz>
Reviewed-by: NAlexandre Chartre <alexandre.chartre@oracle.com>
Acked-by: NJosh Poimboeuf <jpoimboe@redhat.com>
Link: https://lkml.kernel.org/r/20200416115119.465335884@infradead.orgSigned-off-by: NIngo Molnar <mingo@kernel.org>

In preparation of further changes, once again break out the loop body.
No functional changes intended.
Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: NMiroslav Benes <mbenes@suse.cz>
Reviewed-by: NAlexandre Chartre <alexandre.chartre@oracle.com>
Acked-by: NJosh Poimboeuf <jpoimboe@redhat.com>
Link: https://lkml.kernel.org/r/20200416115119.405863817@infradead.orgSigned-off-by: NIngo Molnar <mingo@kernel.org>

validate_functions() iterates all sections their symbols; this is
pointless to do for !text sections as they won't have instructions
anyway.
Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: NMiroslav Benes <mbenes@suse.cz>
Reviewed-by: NAlexandre Chartre <alexandre.chartre@oracle.com>
Acked-by: NJosh Poimboeuf <jpoimboe@redhat.com>
Link: https://lkml.kernel.org/r/20200416115119.346582716@infradead.orgSigned-off-by: NIngo Molnar <mingo@kernel.org>

In preparation for find_insn_containing(), change insn_hash to use
sec_offset_hash().

This actually reduces runtime; probably because mixing in the section
index reduces the collisions due to text sections all starting their
instructions at offset 0.

Runtime on vmlinux.o from 3.1 to 2.5 seconds.
Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: NMiroslav Benes <mbenes@suse.cz>
Reviewed-by: NAlexandre Chartre <alexandre.chartre@oracle.com>
Acked-by: NJosh Poimboeuf <jpoimboe@redhat.com>
Link: https://lkml.kernel.org/r/20200416115119.227240432@infradead.orgSigned-off-by: NIngo Molnar <mingo@kernel.org>

Validate that any call out of .noinstr.text is in between
instr_begin() and instr_end() annotations.

This annotation is useful to ensure correct behaviour wrt tracing
sensitive code like entry/exit and idle code. When we run code in a
sensitive context we want a guarantee no unknown code is ran.

Since this validation relies on knowing the section of call
destination symbols, we must run it on vmlinux.o instead of on
individual object files.

Add two options:

 -d/--duplicate "duplicate validation for vmlinux"
 -l/--vmlinux "vmlinux.o validation"

Where the latter auto-detects when objname ends with "vmlinux.o" and
the former will force all validations, also those already done on
!vmlinux object files.
Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: NMiroslav Benes <mbenes@suse.cz>
Reviewed-by: NAlexandre Chartre <alexandre.chartre@oracle.com>
Acked-by: NJosh Poimboeuf <jpoimboe@redhat.com>
Link: https://lkml.kernel.org/r/20200416115119.106268040@infradead.orgSigned-off-by: NIngo Molnar <mingo@kernel.org>

Objtool keeps per instruction CFI state in struct insn_state and will
save/restore this where required. However, insn_state has grown some
!CFI state, and this must not be saved/restored (that would
loose/destroy state).

Fix this by moving the CFI specific parts of insn_state into struct
cfi_state.
Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: NMiroslav Benes <mbenes@suse.cz>
Reviewed-by: NAlexandre Chartre <alexandre.chartre@oracle.com>
Acked-by: NJosh Poimboeuf <jpoimboe@redhat.com>
Link: https://lkml.kernel.org/r/20200416115119.045821071@infradead.orgSigned-off-by: NIngo Molnar <mingo@kernel.org>

There's going to be a new struct cfi_state, rename this one to make
place.
Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: NMiroslav Benes <mbenes@suse.cz>
Reviewed-by: NAlexandre Chartre <alexandre.chartre@oracle.com>
Acked-by: NJosh Poimboeuf <jpoimboe@redhat.com>
Link: https://lkml.kernel.org/r/20200416115118.986441913@infradead.orgSigned-off-by: NIngo Molnar <mingo@kernel.org>

The SAVE/RESTORE hints are now unused; remove them.
Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: NMiroslav Benes <mbenes@suse.cz>
Reviewed-by: NAlexandre Chartre <alexandre.chartre@oracle.com>
Acked-by: NJosh Poimboeuf <jpoimboe@redhat.com>
Link: https://lkml.kernel.org/r/20200416115118.926738768@infradead.orgSigned-off-by: NIngo Molnar <mingo@kernel.org>

Normally objtool ensures a function keeps the stack layout invariant.
But there is a useful exception, it is possible to stuff the return
stack in order to 'inject' a 'call':

	push $fun
	ret

In this case the invariant mentioned above is violated.

Add an objtool HINT to annotate this and allow a function exit with a
modified stack frame.
Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: NMiroslav Benes <mbenes@suse.cz>
Reviewed-by: NAlexandre Chartre <alexandre.chartre@oracle.com>
Acked-by: NJosh Poimboeuf <jpoimboe@redhat.com>
Link: https://lkml.kernel.org/r/20200416115118.690601403@infradead.orgSigned-off-by: NIngo Molnar <mingo@kernel.org>

Teach objtool a little more about IRET so that we can avoid using the
SAVE/RESTORE annotation. In particular, make the weird corner case in
insn->restore go away.

The purpose of that corner case is to deal with the fact that
UNWIND_HINT_RESTORE lands on the instruction after IRET, but that
instruction can end up being outside the basic block, consider:

	if (cond)
		sync_core()
	foo();

Then the hint will land on foo(), and we'll encounter the restore
hint without ever having seen the save hint.

By teaching objtool about the arch specific exception frame size, and
assuming that any IRET in an STT_FUNC symbol is an exception frame
sized POP, we can remove the use of save/restore hints for this code.
Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: NMiroslav Benes <mbenes@suse.cz>
Reviewed-by: NAlexandre Chartre <alexandre.chartre@oracle.com>
Acked-by: NJosh Poimboeuf <jpoimboe@redhat.com>
Link: https://lkml.kernel.org/r/20200416115118.631224674@infradead.orgSigned-off-by: NIngo Molnar <mingo@kernel.org>

Instruction sets can include more or less complex operations which might
not fit the currently defined set of stack_ops.

Combining more than one stack_op provides more flexibility to describe
the behaviour of an instruction. This also reduces the need to define
new stack_ops specific to a single instruction set.

Allow instruction decoders to generate multiple stack_op per
instruction.
Signed-off-by: NJulien Thierry <jthierry@redhat.com>
Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: NMiroslav Benes <mbenes@suse.cz>
Reviewed-by: NAlexandre Chartre <alexandre.chartre@oracle.com>
Acked-by: NJosh Poimboeuf <jpoimboe@redhat.com>
Link: https://lkml.kernel.org/r/20200327152847.15294-11-jthierry@redhat.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

If the prefix of section name is not '.rodata', the following
function call can never return 0.

    strcmp(sec->name, C_JUMP_TABLE_SECTION)

So the name comparison is pointless, just remove it.
Signed-off-by: NMuchun Song <songmuchun@bytedance.com>
Signed-off-by: NJosh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: NIngo Molnar <mingo@kernel.org>

The jump and call destination relocation offsets are x86-specific.
Abstract them by calling arch-specific implementations.

[ jthierry: Remove superfluous comment; replace other addend offsets
      	    with arch_dest_rela_offset() ]
Signed-off-by: NRaphael Gault <raphael.gault@arm.com>
Signed-off-by: NJulien Thierry <jthierry@redhat.com>
Acked-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: NMiroslav Benes <mbenes@suse.cz>
Signed-off-by: NJosh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: NIngo Molnar <mingo@kernel.org>

The initial register state is set up by arch specific code. Use the
value the arch code has set when restoring registers from the stack.
Suggested-by: NRaphael Gault <raphael.gault@arm.com>
Signed-off-by: NJulien Thierry <jthierry@redhat.com>
Acked-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: NMiroslav Benes <mbenes@suse.cz>
Signed-off-by: NJosh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: NIngo Molnar <mingo@kernel.org>

The .alternatives section can contain entries with no original
instructions. Objtool will currently crash when handling such an entry.

Just skip that entry, but still give a warning to discourage useless
entries.
Signed-off-by: NJulien Thierry <jthierry@redhat.com>
Acked-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: NMiroslav Benes <mbenes@suse.cz>
Signed-off-by: NJosh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: NIngo Molnar <mingo@kernel.org>

When a function fails its validation, it might leave a stale state
that will be used for the validation of other functions. That would
cause false warnings on potentially valid functions.

Reset the instruction state before the validation of each individual
function.
Signed-off-by: NJulien Thierry <jthierry@redhat.com>
Acked-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: NMiroslav Benes <mbenes@suse.cz>
Signed-off-by: NJosh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: NIngo Molnar <mingo@kernel.org>

POP operations are already in the code path where the destination
operand is OP_DEST_REG. There is no need to check the operand type
again.
Signed-off-by: NJulien Thierry <jthierry@redhat.com>
Acked-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: NMiroslav Benes <mbenes@suse.cz>
Signed-off-by: NJosh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: NIngo Molnar <mingo@kernel.org>

If func is NULL, a seg fault can result.

This is a theoretical issue which was found by Coverity, ID: 1492002
("Dereference after null check").

Fixes: c705cecc ("objtool: Track original function across branches")
Reported-by: NGustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: NJosh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: NBorislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/afc628693a37acd287e843bcc5c0430263d93c74.1585761021.git.jpoimboe@redhat.com

If a switch jump table's indirect branch is in a ".cold" subfunction in
.text.unlikely, objtool doesn't detect it, and instead prints a false
warning:

  drivers/media/v4l2-core/v4l2-ioctl.o: warning: objtool: v4l_print_format.cold()+0xd6: sibling call from callable instruction with modified stack frame
  drivers/hwmon/max6650.o: warning: objtool: max6650_probe.cold()+0xa5: sibling call from callable instruction with modified stack frame
  drivers/media/dvb-frontends/drxk_hard.o: warning: objtool: init_drxk.cold()+0x16f: sibling call from callable instruction with modified stack frame

Fix it by comparing the function, instead of the section and offset.

Fixes: 13810435 ("objtool: Support GCC 8's cold subfunctions")
Signed-off-by: NJosh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: NBorislav Petkov <bp@suse.de>
Reviewed-by: NMiroslav Benes <mbenes@suse.cz>
Acked-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/157c35d42ca9b6354bbb1604fe9ad7d1153ccb21.1585761021.git.jpoimboe@redhat.com

CONFIG_UBSAN_TRAP causes GCC to emit a UD2 whenever it encounters an
unreachable code path.  This includes __builtin_unreachable().  Because
the BUG() macro uses __builtin_unreachable() after it emits its own UD2,
this results in a double UD2.  In this case objtool rightfully detects
that the second UD2 is unreachable:

  init/main.o: warning: objtool: repair_env_string()+0x1c8: unreachable instruction

We weren't able to figure out a way to get rid of the double UD2s, so
just silence the warning.
Reported-by: NRandy Dunlap <rdunlap@infradead.org>
Signed-off-by: NJosh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: NBorislav Petkov <bp@suse.de>
Reviewed-by: NKees Cook <keescook@chromium.org>
Reviewed-by: NMiroslav Benes <mbenes@suse.cz>
Acked-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/6653ad73c6b59c049211bd7c11ed3809c20ee9f5.1585761021.git.jpoimboe@redhat.com

it's not really different from e.g. __sanitizer_cov_trace_cmp4();
as it is, the switches that generate an array of labels get
rejected by objtool, while slightly different set of cases
that gets compiled into a series of comparisons is accepted.
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

In preparation to adding a vmlinux.o specific pass, rearrange some
code. No functional changes intended.
Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: NMiroslav Benes <mbenes@suse.cz>
Acked-by: NJosh Poimboeuf <jpoimboe@redhat.com>
Link: https://lkml.kernel.org/r/20200324160924.924304616@infradead.org

Perf shows we spend a measurable amount of time spend cleaning up
right before we exit anyway. Avoid the needsless work and just
terminate.

This reduces objtool on vmlinux.o runtime from 5.4s to 4.8s
Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: NMiroslav Benes <mbenes@suse.cz>
Acked-by: NJosh Poimboeuf <jpoimboe@redhat.com>
Link: https://lkml.kernel.org/r/20200324160924.800720170@infradead.org

Perf showed that __hash_init() is a significant portion of
read_sections(), so instead of doing a per section rela_hash, use an
elf-wide rela_hash.

Statistics show us there are about 1.1 million relas, so size it
accordingly.

This reduces the objtool on vmlinux.o runtime to a third, from 15 to 5
seconds.
Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: NMiroslav Benes <mbenes@suse.cz>
Acked-by: NJosh Poimboeuf <jpoimboe@redhat.com>
Link: https://lkml.kernel.org/r/20200324160924.739153726@infradead.org

Have it print a few numbers which can be used to size the hashtables.
Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: NMiroslav Benes <mbenes@suse.cz>
Acked-by: NJosh Poimboeuf <jpoimboe@redhat.com>
Link: https://lkml.kernel.org/r/20200324160924.321381240@infradead.org

Now that func_for_each_insn() is available, rename
func_for_each_insn_all(). This gets us:

  sym_for_each_insn()  - iterate on symbol offset/len
  func_for_each_insn() - iterate on insn->func
Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: NMiroslav Benes <mbenes@suse.cz>
Acked-by: NJosh Poimboeuf <jpoimboe@redhat.com>
Link: https://lkml.kernel.org/r/20200324160924.083720147@infradead.org

There is func_for_each_insn() and func_for_each_insn_all(), the both
iterate the instructions, but the first uses symbol offset/length
while the second uses insn->func.

Rename func_for_each_insn() to sym_for_eac_insn() because it iterates
on symbol information.
Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: NMiroslav Benes <mbenes@suse.cz>
Acked-by: NJosh Poimboeuf <jpoimboe@redhat.com>
Link: https://lkml.kernel.org/r/20200324160924.024341229@infradead.org