- 29 11月, 2011 32 次提交
-
-
由 Neal Cardwell 提交于
Since 2005 (c1b4a7e6) tcp_tso_should_defer has been using tcp_max_burst() as a target limit for deciding how large to make outgoing TSO packets when not using sysctl_tcp_tso_win_divisor. But since 2008 (dd9e0dda) tcp_max_burst() returns the reordering degree. We should not have tcp_tso_should_defer attempt to build larger segments just because there is more reordering. This commit splits the notion of deferral size used in TSO from the notion of burst size used in cwnd moderation, and returns the TSO deferral limit to its original value. Signed-off-by: NNeal Cardwell <ncardwell@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Pascal Hambourg 提交于
Use memcmp() instead of cast to u16 when checking the PAD field. Signed-off-by: NPascal Hambourg <pascal@plouf.fr.eu.org> Signed-off-by: Nchas williams - CONTRACTOR <chas@cmf.nrl.navy.mil> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Pascal Hambourg 提交于
Routed payload requires less headroom than bridged payload. So do not reallocate headroom if not needed. Also, add worst case AAL5 overhead to netdev->hard_header_len. Signed-off-by: NPascal Hambourg <pascal@plouf.fr.eu.org> Signed-off-by: Nchas williams - CONTRACTOR <chas@cmf.nrl.navy.mil> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
We can test/set multiple bits from sk_flags at once, to shorten a bit socket setup/dismantle phase. Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
Igor Maravic reported an error caused by jump_label_dec() being called from IRQ context : BUG: sleeping function called from invalid context at kernel/mutex.c:271 in_atomic(): 1, irqs_disabled(): 0, pid: 0, name: swapper 1 lock held by swapper/0: #0: (&n->timer){+.-...}, at: [<ffffffff8107ce90>] call_timer_fn+0x0/0x340 Pid: 0, comm: swapper Not tainted 3.2.0-rc2-net-next-mpls+ #1 Call Trace: <IRQ> [<ffffffff8104f417>] __might_sleep+0x137/0x1f0 [<ffffffff816b9a2f>] mutex_lock_nested+0x2f/0x370 [<ffffffff810a89fd>] ? trace_hardirqs_off+0xd/0x10 [<ffffffff8109a37f>] ? local_clock+0x6f/0x80 [<ffffffff810a90a5>] ? lock_release_holdtime.part.22+0x15/0x1a0 [<ffffffff81557929>] ? sock_def_write_space+0x59/0x160 [<ffffffff815e936e>] ? arp_error_report+0x3e/0x90 [<ffffffff810969cd>] atomic_dec_and_mutex_lock+0x5d/0x80 [<ffffffff8112fc1d>] jump_label_dec+0x1d/0x50 [<ffffffff81566525>] net_disable_timestamp+0x15/0x20 [<ffffffff81557a75>] sock_disable_timestamp+0x45/0x50 [<ffffffff81557b00>] __sk_free+0x80/0x200 [<ffffffff815578d0>] ? sk_send_sigurg+0x70/0x70 [<ffffffff815e936e>] ? arp_error_report+0x3e/0x90 [<ffffffff81557cba>] sock_wfree+0x3a/0x70 [<ffffffff8155c2b0>] skb_release_head_state+0x70/0x120 [<ffffffff8155c0b6>] __kfree_skb+0x16/0x30 [<ffffffff8155c119>] kfree_skb+0x49/0x170 [<ffffffff815e936e>] arp_error_report+0x3e/0x90 [<ffffffff81575bd9>] neigh_invalidate+0x89/0xc0 [<ffffffff81578dbe>] neigh_timer_handler+0x9e/0x2a0 [<ffffffff81578d20>] ? neigh_update+0x640/0x640 [<ffffffff81073558>] __do_softirq+0xc8/0x3a0 Since jump_label_{inc|dec} must be called from process context only, we must defer jump_label_dec() if net_disable_timestamp() is called from interrupt context. Reported-by: NIgor Maravic <igorm@etf.rs> Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Axel Lin 提交于
This patch converts the drivers in drivers/net/ethernet/* to use the module_platform_driver() macro which makes the code smaller and a bit simpler. Cc: "David S. Miller" <davem@davemloft.net> Cc: Pantelis Antoniou <pantelis.antoniou@gmail.com> Cc: Vitaly Bordug <vbordug@ru.mvista.com> Cc: Wan ZongShun <mcuos.com@gmail.com> Cc: Nicolas Pitre <nico@fluxnic.net> Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com> Cc: Marc Kleine-Budde <mkl@pengutronix.de> Cc: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Cc: Jiri Pirko <jpirko@redhat.com> Cc: Daniel Hellstrom <daniel@gaisler.com> Cc: Alexey Dobriyan <adobriyan@gmail.com> Cc: Tobias Klauser <tklauser@distanz.ch> Cc: Grant Likely <grant.likely@secretlab.ca> Cc: Jiri Kosina <jkosina@suse.cz> Cc: Richard Cochran <richard.cochran@omicron.at> Cc: Jonas Bonn <jonas@southpole.se> Cc: Sebastian Poehn <sebastian.poehn@belden.com> Cc: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Cc: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com> Cc: "Michał Mirosław" <mirq-linux@rere.qmqm.pl> Signed-off-by: NAxel Lin <axel.lin@gmail.com> Acked-by: NWan ZongShun <mcuos.com@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Axel Lin 提交于
This patch converts the drivers in drivers/net/can/* to use the module_platform_driver() macro which makes the code smaller and a bit simpler. Cc: Wolfgang Grandegger <wg@grandegger.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Bhupesh Sharma <bhupesh.sharma@st.com> Cc: Jiri Kosina <jkosina@suse.cz> Cc: Grant Likely <grant.likely@secretlab.ca> Cc: Anatolij Gustschin <agust@denx.de> Cc: Paul Bolle <pebolle@tiscali.nl> Cc: Kurt Van Dijck <kurt.van.dijck@eia.be> Cc: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: NAxel Lin <axel.lin@gmail.com> Acked-by: NMarc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ralf Baechle 提交于
The Linux coding style wants the return statement on its own line. Signed-off-by: NRalf Baechle <ralf@linux-mips.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ralf Baechle 提交于
nr_route.ndigis is unsigned int so the nr_route.ndigis < 0 expression is never true and can be dropped. Doing the nr_ax25_dev_get call later allows the nr_route.ndigis test to bail out without having to dev_put. Signed-off-by: NRalf Baechle <ralf@linux-mips.org> Cc: Thomas Osterried <thomas@osterried.de> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ralf Baechle 提交于
struct nr_route_struct's mnemonic permits a string of up to 7 bytes to be used. If userland passes a not zero terminated string to the kernel adding a node to the routing table might result in the kernel attempting to read copy a too long string. Mnemonic is part of the NET/ROM routing protocol; NET/ROM routing table updates only broadcast 6 bytes. The 7th byte in the mnemonic array exists only as a \0 termination character for the kernel code's convenience. Fixed by rejecting mnemonic strings that have no terminating \0 in the first 7 characters. Do this test only NETROM_NODE to avoid breaking NETROM_NEIGH where userland might passing an uninitialized mnemonic field. Initial patch by Dan Carpenter <dan.carpenter@oracle.com>. Signed-off-by: NRalf Baechle <ralf@linux-mips.org> Cc: Dan Carpenter <dan.carpenter@oracle.com> Cc: Walter Harms <wharms@bfs.de> Cc: Thomas Osterried <thomas@osterried.de> Acked-by: NDan Carpenter <dan.carpenter@oracle.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ralf Baechle 提交于
Very large, nonsenical arguments or use in very extreme conditions could result in integer overflows. Check ioctls arguments to avoid such overflows and return -EINVAL for too large arguments. To allow the use of AX.25 for even the most extreme setup (think packet radio to the Phase 5E mars probe) we make no further attempt to clamp the argument range. Originally reported by Fan Long <longfancn@gmail.com> and a first patch was sent by Xi Wang <xi.wang@gmail.com>. Signed-off-by: NRalf Baechle <ralf@linux-mips.org> Cc: Xi Wang <xi.wang@gmail.com> Cc: Joerg Reuter <jreuter@yaina.de> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: Thomas Osterried <thomas@osterried.de> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ben Hutchings 提交于
Support for specific hardware belongs under drivers/net/ not net/. Signed-off-by: NBen Hutchings <ben@decadent.org.uk> Acked-by: NLennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ben Hutchings 提交于
Any headers included by drivers should be under include/, and any definitions they use are not really private to the core as the name "dsa_priv.h" suggests. Signed-off-by: NBen Hutchings <ben@decadent.org.uk> Acked-by: NLennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ben Hutchings 提交于
I mistakenly exported functions from slave.c that are only called from dsa.c, part of the same module. Signed-off-by: NBen Hutchings <ben@decadent.org.uk> Acked-by: NLennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Matt Carlson 提交于
Tg3 normally gets a performance boost by increasing the PCI Maximum Read Request Size (MRRS) to 4k. Unfortunately, this is causing some problems on particular hardware platforms. This patch removes all code that modifies the MRRS except for one case. As part of a solution to fix an internal FIFO problem on the 5719, the driver artificially capped the MRRS to 2k for the entire 5719, and later 5720, ASIC revs. This was overly aggressive and only really needed to be done for the 5719 A0. In the spirit of the rest of this patch, the driver will only reprogram the MRRS for this device if the value exceeds the 2k cap. Signed-off-by: NMatt Carlson <mcarlson@broadcom.com> Signed-off-by: NMichael Chan <mchan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Matt Carlson 提交于
On the earliest TSO capable devices, TSO was accomplished through firmware. The TSO cannot coexist with ASF management firmware though. The tg3 driver determines whether or not ASF is enabled by calling tg3_get_eeprom_hw_cfg(), which checks a particular bit of NIC memory. Commit dabc5c67, entitled "tg3: Move TSO_CAPABLE assignment", accidentally moved the code that determines TSO capabilities earlier than the call to tg3_get_eeprom_hw_cfg(). As a consequence, the driver was attempting to determine TSO capabilities before it had all the data it needed to make the decision. This patch fixes the problem by revisiting and reevaluating the decision after tg3_get_eeprom_hw_cfg() is called. Signed-off-by: NMatt Carlson <mcarlson@broadcom.com> Signed-off-by: NMichael Chan <mchan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
Current SFB double hashing is not fulfilling SFB theory, if two flows share same rxhash value. Using skb_flow_dissect() permits to really have better hash dispersion, and get tunnelling support as well. Double hashing point was mentioned by Florian Westphal Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
Instead of using a custom flow dissector, use skb_flow_dissect() and benefit from tunnelling support. This lack of tunnelling support was mentioned by Dan Siemon. Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
No functional changes. This uses the code we factorized in skb_flow_dissect() Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
We use at least two flow dissectors in network stack, with known limitations and code duplication. Introduce skb_flow_dissect() to factorize this, highly inspired from existing dissector from __skb_get_rxhash() Note : We extensively use skb_header_pointer(), this permits us to not touch skb at all. Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Yaniv Rosner 提交于
Change comparison order such that the variable will come before the compared value. Signed-off-by: NYaniv Rosner <yanivr@broadcom.com> Signed-off-by: NEilon Greenstein <eilong@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Yaniv Rosner 提交于
Fix spelling, alignment, empty lines, relocate the is_4_port_mode function, and split bnx2x_link_status_update function. Signed-off-by: NYaniv Rosner <yanivr@broadcom.com> Signed-off-by: NEilon Greenstein <eilong@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Yaniv Rosner 提交于
Fix the MAC test of the 1G port of the BCM57800 to use the UMAC instead of the XMAC. Signed-off-by: NYaniv Rosner <yanivr@broadcom.com> Signed-off-by: NEilon Greenstein <eilong@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Yaniv Rosner 提交于
The populate function will fail in case an unknown external PHY is detected. Signed-off-by: NYaniv Rosner <yanivr@broadcom.com> Signed-off-by: NEilon Greenstein <eilong@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Yaniv Rosner 提交于
This patch enables the usage of simpler MDC/MDIO work-around when accessing Warpcore registers. Signed-off-by: NYaniv Rosner <yanivr@broadcom.com> Signed-off-by: NEilon Greenstein <eilong@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Yaniv Rosner 提交于
This patch contain several fixes for the BCM84833. This PHY is still not in bnx2x production, hence this patch can be considered as enhancement. Signed-off-by: NYaniv Rosner <yanivr@broadcom.com> Signed-off-by: NEilon Greenstein <eilong@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Yaniv Rosner 提交于
Put Warpcore in low power mode in case of fan failure to reduce heat. Signed-off-by: NYaniv Rosner <yanivr@broadcom.com> Signed-off-by: NEilon Greenstein <eilong@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Yaniv Rosner 提交于
Fix a problem when new traffic class is created with 0% BW, the ETS is not conforming. Signed-off-by: NYaniv Rosner <yanivr@broadcom.com> Signed-off-by: NEilon Greenstein <eilong@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Yaniv Rosner 提交于
Change BRB to work in per class guaranteed mode and handle cases for BW 0%. Signed-off-by: NYaniv Rosner <yanivr@broadcom.com> Signed-off-by: NEilon Greenstein <eilong@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
Now sk_route_caps is u64, its dangerous to use an integer to store result of an AND operator. It wont work if NETIF_F_SG is moved on the upper part of u64. Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com> CC: Michał Mirosław <mirq-linux@rere.qmqm.pl> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 John W. Linville 提交于
Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next into for-davem
-
- 28 11月, 2011 8 次提交
-
-
由 Axel Lin 提交于
This patch converts the drivers in drivers/net/irda/* to use the module_platform_driver() macro which makes the code smaller and a bit simpler. Cc: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: NAxel Lin <axel.lin@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Neal Cardwell 提交于
The problem: Senders were overriding cwnd values picked during an undo by calling tcp_moderate_cwnd() in tcp_try_to_open(). The fix: Don't moderate cwnd in tcp_try_to_open() if we're in TCP_CA_Open, since doing so is generally unnecessary and specifically would override a DSACK-based undo of a cwnd reduction made in fast recovery. Signed-off-by: NNeal Cardwell <ncardwell@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Neal Cardwell 提交于
Previously, SACK-enabled connections hung around in TCP_CA_Disorder state while snd_una==high_seq, just waiting to accumulate DSACKs and hopefully undo a cwnd reduction. This could and did lead to the following unfortunate scenario: if some incoming ACKs advance snd_una beyond high_seq then we were setting undo_marker to 0 and moving to TCP_CA_Open, so if (due to reordering in the ACK return path) we shortly thereafter received a DSACK then we were no longer able to undo the cwnd reduction. The change: Simplify the congestion avoidance state machine by removing the behavior where SACK-enabled connections hung around in the TCP_CA_Disorder state just waiting for DSACKs. Instead, when snd_una advances to high_seq or beyond we typically move to TCP_CA_Open immediately and allow an undo in either TCP_CA_Open or TCP_CA_Disorder if we later receive enough DSACKs. Other patches in this series will provide other changes that are necessary to fully fix this problem. Signed-off-by: NNeal Cardwell <ncardwell@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Neal Cardwell 提交于
The bug: When the ACK field is below snd_una (which can happen when ACKs are reordered), senders ignored DSACKs (preventing undo) and did not call tcp_fastretrans_alert, so they did not increment prr_delivered to reflect newly-SACKed sequence ranges, and did not call tcp_xmit_retransmit_queue, thus passing up chances to send out more retransmitted and new packets based on any newly-SACKed packets. The change: When the ACK field is below snd_una (the "old_ack" goto label), call tcp_fastretrans_alert to allow undo based on any newly-arrived DSACKs and try to send out more packets based on newly-SACKed packets. Other patches in this series will provide other changes that are necessary to fully fix this problem. Signed-off-by: NNeal Cardwell <ncardwell@google.com> Acked-by: NIlpo Järvinen <ilpo.jarvinen@helsinki.fi> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Neal Cardwell 提交于
The bug: Senders ignored DSACKs after recovery when there were no outstanding packets (a common scenario for HTTP servers). The change: when there are no outstanding packets (the "no_queue" goto label), call tcp_fastretrans_alert() in order to use DSACKs to undo congestion window reductions. Other patches in this series will provide other changes that are necessary to fully fix this problem. Signed-off-by: NNeal Cardwell <ncardwell@google.com> Acked-by: NIlpo Järvinen <ilpo.jarvinen@helsinki.fi> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Neal Cardwell 提交于
Allow callers to decide whether an ACK is a duplicate ACK. This is a prerequisite to allowing fastretrans_alert to be called from new contexts, such as the no_queue and old_ack code paths, from which we have extra info that tells us whether an ACK is a dupack. Signed-off-by: NNeal Cardwell <ncardwell@google.com> Acked-by: NIlpo Järvinen <ilpo.jarvinen@helsinki.fi> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Amir Vadai 提交于
When using vlan 0 and UP 0, vlan header wasn't placed. Signed-off-by: NAmir Vadai <amirv@mellanox.co.il> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Amir Vadai 提交于
Device must be in promiscuous mode or DMAC must be same as the host MAC, or else packet will be dropped by the HW rx filtering. Signed-off-by: NAmir Vadai <amirv@mellanox.co.il> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-