Add stmmac_fpe_stop_wq() in stmmac_suspend() to terminate FPE workqueue
during suspend. So, in suspend mode, there will be no FPE workqueue
available. Without this fix, new additional FPE workqueue will be created
in every suspend->resume cycle.

Fixes: 5a558611 ("net: stmmac: support FPE link partner hand-shaking procedure")
Signed-off-by: NMohammad Athari Bin Ismail <mohammad.athari.ismail@intel.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The current stmmac driver WOL implementation will enable MAC WOL
if MAC HW PMT feature is on. Else, the driver will check for
PHY WOL support. There is another case where MAC HW PMT is
enabled but the platform still goes for the PHY WOL option.
E.g, Intel platform are designed for PHY WOL but not MAC WOL
although HW MAC PMT features are enabled.

Introduce use_phy_wol platform data to select PHY WOL
instead of depending on HW PMT features. Set use_phy_wol
will disable the plat->pmt which currently used to
determine the system to wake up by MAC WOL or PHY WOL.
Signed-off-by: NLing Pei Lee <pei.lee.ling@intel.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The stmmac driver has rcu_read_lock()/rcu_read_unlock() pairs around XDP
program invocations. However, the actual lifetime of the objects referred
by the XDP program invocation is longer, all the way through to the call to
xdp_do_flush(), making the scope of the rcu_read_lock() too small. This
turns out to be harmless because it all happens in a single NAPI poll
cycle (and thus under local_bh_disable()), but it makes the rcu_read_lock()
misleading.

Rather than extend the scope of the rcu_read_lock(), just get rid of it
entirely. With the addition of RCU annotations to the XDP_REDIRECT map
types that take bh execution into account, lockdep even understands this to
be safe, so there's really no reason to keep it around.
Signed-off-by: NToke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>
Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Cc: Alexandre Torgue <alexandre.torgue@foss.st.com>
Cc: Jose Abreu <joabreu@synopsys.com>
Link: https://lore.kernel.org/bpf/20210624160609.292325-19-toke@redhat.com

There is no reason to embed an if within an if, we can just logically
AND the two conditions.
Signed-off-by: NVladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: NWong Vee Khee <vee.khee.wong@linux.intel.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The commit 8532f613 ("net: stmmac: introduce MSI Interrupt routines
for mac, safety, RX & TX") introduced the converity warnings:-

  1. Unused value (UNUSED_VALUE)
     assigned_value: Assigning value REQ_IRQ_ERR_MAC to irq_err here,
     but that stored value is not used.

  2. Unused value (UNUSED_VALUE)
     assigned_value: Assigning value REQ_IRQ_ERR_NO to irq_err here,
     but that stored value is overwritten before it can used.

  3. Unused value (UNUSED_VALUE)
     assigned_value: Assigning value REQ_IRQ_ERR_WOL to irq_err here,
     but that stored value is not used.

Fixed these by removing the unnecessary value assignments.

Fixes: 8532f613 ("net: stmmac: introduce MSI Interrupt routines for mac, safety, RX & TX")
Signed-off-by: NWong Vee Khee <vee.khee.wong@linux.intel.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The commit 5a558611 ("net: stmmac: support FPE link partner
hand-shaking procedure") introduced the following coverity warning:

  "Parse warning (PW.MIXED_ENUM_TYPE)"
  "1. mixed_enum_type: enumerated type mixed with another type"

This is due to both "lo_state" and "lp_sate" which their datatype are
enum stmmac_fpe_state type, and being assigned with "FPE_EVENT_UNKNOWN"
which is a macro-defined of 0. Fixed this by assigned both these
variables with the correct enum value.

Fixes: 5a558611 ("net: stmmac: support FPE link partner hand-shaking procedure")
Signed-off-by: NWong Vee Khee <vee.khee.wong@linux.intel.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

To support XDP, a headroom is prepended to the packet data.
Consider this offset when doing a prefetch.

Fixes: da5ec7f2 ("net: stmmac: refactor stmmac_init_rx_buffers for stmmac_reinit_rx_buffers")
Signed-off-by: NMatteo Croce <mcroce@microsoft.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

There are missing { } around a block of code on an if statement. Fix this
by adding them in.

Addresses-Coverity: ("Nesting level does not match indentation")
Fixes: 46682cb8 ("net: stmmac: enable Intel mGbE 2.5Gbps link speed")
Signed-off-by: NColin Ian King <colin.king@canonical.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

We are currently assuming that GMAC_AHB_RESET will already be deasserted
by the bootloader. However if this has not been done, probing of the GMAC
will fail. To remedy this we must ensure GMAC_AHB_RESET has been deasserted
prior to probing.

v2 changes:
 - remove NULL condition check for stmmac_ahb_rst in stmmac_main.c
 - unwrap dev_err() message in stmmac_main.c
 - add PTR_ERR() around plat->stmmac_ahb_rst in stmmac_platform.c

v3 changes:
 - add error pointer to dev_err() output
 - add reset_control_assert(stmmac_ahb_rst) in stmmac_dvr_remove
 - revert PTR_ERR() around plat->stmmac_ahb_rst since this is performed
   on the returned value of ret by the calling function
Signed-off-by: NMatthew Hagan <mnhagan88@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

priv->plat->mdio_bus_data is optional, some platforms may not set it,
however we proceed to look straight at priv->plat->mdio_bus_data->has_xpcs.

Since the xpcs is instantiated based on the has_xpcs property, we can
avoid looking at the priv->plat->mdio_bus_data structure altogether and
just check for the presence of the xpcs pointer.

Fixes: 11059740 ("net: pcs: xpcs: convert to phylink_pcs_ops")
Reported-by: NDan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: NVladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The Intel mGbE supports 2.5Gbps link speed by increasing the clock rate by
2.5 times of the original rate. In this mode, the serdes/PHY operates at a
serial baud rate of 3.125 Gbps and the PCS data path and GMII interface of
the MAC operate at 312.5 MHz instead of 125 MHz.

For Intel mGbE, the overclocking of 2.5 times clock rate to support 2.5G is
only able to be configured in the BIOS during boot time. Kernel driver has
no access to modify the clock rate for 1Gbps/2.5G mode. The way to
determined the current 1G/2.5G mode is by reading a dedicated adhoc
register through mdio bus. In short, after the system boot up, it is either
in 1G mode or 2.5G mode which not able to be changed on the fly.

Compared to 1G mode, the 2.5G mode selects the 2500BASEX as PHY interface and
disables the xpcs_an_inband. This is to cater for some PHYs that only
supports 2500BASEX PHY interface with no autonegotiation.

v2: remove MAC supported link speed masking
v3: Restructure  to introduce intel_speed_mode_2500() to read serdes registers
    for max speed supported and select the appropritate configuration.
    Use max_speed to determine the supported link speed mask.
Signed-off-by: NVoon Weifeng <weifeng.voon@intel.com>
Signed-off-by: NMichael Sit Wei Hong <michael.wei.hong.sit@intel.com>
Reviewed-by: NVladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch is a preparation patch for the enabling of Intel mGbE 2.5Gbps
link speed. The Intel mGbR link speed configuration (1G/2.5G) is depends on
a mdio ADHOC register which can be configured in the bios menu.
As PHY interface might be different for 1G and 2.5G, the mdio bus need be
ready to check the link speed and select the PHY interface before probing
the xPCS.
Signed-off-by: NVoon Weifeng <weifeng.voon@intel.com>
Signed-off-by: NMichael Sit Wei Hong <michael.wei.hong.sit@intel.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Since all the remaining members of struct mdio_xpcs_ops have direct
equivalents in struct phylink_pcs_ops, it is about time we remove it
altogether.

Since the phylink ops return void, we need to remove the error
propagation from the various xpcs methods and simply print an error
message where appropriate.

Since xpcs_get_state_c73() detects link faults and attempts to reset the
link on its own by calling xpcs_config(), but xpcs_config() now has a
lot of phylink arguments which are not needed and cannot be simply
fabricated by anybody else except phylink, the actual implementation has
been moved into a smaller xpcs_do_config().

The const struct mdio_xpcs_ops *priv->hw->xpcs has been removed, so we
need to look at the struct mdio_xpcs_args pointer now as an indication
whether the port has an XPCS or not.
Signed-off-by: NVladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Unify the 2 existing PCS drivers (lynx and xpcs) by doing a similar
thing on probe, which is to have a *_create function that takes a
struct mdio_device * given by the caller, and builds a private PCS
structure around that.

This changes stmmac to hold only a pointer to the xpcs, as opposed to
the full structure. This will be used in the next patch when struct
mdio_xpcs_ops is removed. Currently a pointer to struct mdio_xpcs_ops
is used as a shorthand to determine whether the port has an XPCS or not.
We can do the same now with the mdio_xpcs_args pointer.
Signed-off-by: NVladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Calling a function pointer with a single implementation through
struct mdio_xpcs_ops is clunky, and the stmmac_do_callback system forces
this to return int, even though it always returns zero.

Simply remove the "validate" function pointer from struct mdio_xpcs_ops
and replace it with an exported xpcs_validate symbol which is called
directly by stmmac.

priv->hw->xpcs is of the type "const struct mdio_xpcs_ops *" and is used
as a placeholder/synonym for priv->plat->mdio_bus_data->has_xpcs. It is
done that way because the mdio_bus_data pointer might or might not be
populated in all stmmac instantiations.
Signed-off-by: NVladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The operating mode of the driver is currently to populate its
struct mdio_xpcs_args::supported and struct mdio_xpcs_args::an_mode
statically in xpcs_probe(), based on the passed phy_interface_t,
and work with those.

However this is not the operation that phylink expects from a PCS
driver, because the port might be attached to an SFP cage that triggers
changes of the phy_interface_t dynamically as one SFP module is
unpluggged and another is plugged.

To migrate towards that model, the struct mdio_xpcs_args should not
cache anything related to the phy_interface_t, but just look up the
statically defined, const struct xpcs_compat structure corresponding to
the detected PCS OUI/model number.

So we delete the "supported" and "an_mode" members of struct
mdio_xpcs_args, and add the "id" structure there (since the ID is not
expected to change at runtime).

Since xpcs->supported is used deep in the code in _xpcs_config_aneg_c73(),
we need to modify some function headers to pass the xpcs_compat from all
callers. In turn, the xpcs_compat is always supplied externally to the
xpcs module:
- Most of the time by phylink
- In xpcs_probe() it is needed because xpcs_soft_reset() writes to
  MDIO_MMD_PCS or to MDIO_MMD_VEND2 depending on whether an_mode is clause
  37 or clause 73. In order to not introduce functional changes related
  to when the soft reset is issued, we continue to require the initial
  phy_interface_t argument to be passed to xpcs_probe() so we can pass
  this on to xpcs_soft_reset().
- stmmac_open() wants to know whether to call stmmac_init_phy() or not,
  and for that it looks inside xpcs->an_mode, because the clause 73
  (backplane) AN modes supposedly do not have a PHY. Because we moved
  an_mode outside of struct mdio_xpcs_args, this is now no longer
  directly possible, so we introduce a helper function xpcs_get_an_mode()
  which protects the data encapsulation of the xpcs module and requires
  a phy_interface_t to be passed as argument. This function can look up
  the appropriate compat based on the phy_interface_t.
Signed-off-by: NVladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

In the case of MDIO bus registration failure due to no external PHY
devices is connected to the MAC, clk_disable_unprepare() is called in
stmmac_bus_clk_config() and intel_eth_pci_probe() respectively.

The second call in intel_eth_pci_probe() will caused the following:-

[   16.578605] intel-eth-pci 0000:00:1e.5: No PHY found
[   16.583778] intel-eth-pci 0000:00:1e.5: stmmac_dvr_probe: MDIO bus (id: 2) registration failed
[   16.680181] ------------[ cut here ]------------
[   16.684861] stmmac-0000:00:1e.5 already disabled
[   16.689547] WARNING: CPU: 13 PID: 2053 at drivers/clk/clk.c:952 clk_core_disable+0x96/0x1b0
[   16.697963] Modules linked in: dwc3 iTCO_wdt mei_hdcp iTCO_vendor_support udc_core x86_pkg_temp_thermal kvm_intel marvell10g kvm sch_fq_codel nfsd irqbypass dwmac_intel(+) stmmac uio ax88179_178a pcs_xpcs phylink uhid spi_pxa2xx_platform usbnet mei_me pcspkr tpm_crb mii i2c_i801 dw_dmac dwc3_pci thermal dw_dmac_core intel_rapl_msr libphy i2c_smbus mei tpm_tis intel_th_gth tpm_tis_core tpm intel_th_acpi intel_pmc_core intel_th i915 fuse configfs snd_hda_intel snd_intel_dspcfg snd_intel_sdw_acpi snd_hda_codec snd_hda_core snd_pcm snd_timer snd soundcore
[   16.746785] CPU: 13 PID: 2053 Comm: systemd-udevd Tainted: G     U            5.13.0-rc3-intel-lts #76
[   16.756134] Hardware name: Intel Corporation Alder Lake Client Platform/AlderLake-S ADP-S DRR4 CRB, BIOS ADLIFSI1.R00.1494.B00.2012031421 12/03/2020
[   16.769465] RIP: 0010:clk_core_disable+0x96/0x1b0
[   16.774222] Code: 00 8b 05 45 96 17 01 85 c0 7f 24 48 8b 5b 30 48 85 db 74 a5 8b 43 7c 85 c0 75 93 48 8b 33 48 c7 c7 6e 32 cc b7 e8 b2 5d 52 00 <0f> 0b 5b 5d c3 65 8b 05 76 31 18 49 89 c0 48 0f a3 05 bc 92 1a 01
[   16.793016] RSP: 0018:ffffa44580523aa0 EFLAGS: 00010086
[   16.798287] RAX: 0000000000000000 RBX: ffff8d7d0eb70a00 RCX: 0000000000000000
[   16.805435] RDX: 0000000000000002 RSI: ffffffffb7c62d5f RDI: 00000000ffffffff
[   16.812610] RBP: 0000000000000287 R08: 0000000000000000 R09: ffffa445805238d0
[   16.819759] R10: 0000000000000001 R11: 0000000000000001 R12: ffff8d7d0eb70a00
[   16.826904] R13: ffff8d7d027370c8 R14: 0000000000000006 R15: ffffa44580523ad0
[   16.834047] FS:  00007f9882fa2600(0000) GS:ffff8d80a0940000(0000) knlGS:0000000000000000
[   16.842177] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[   16.847966] CR2: 00007f9882bea3d8 CR3: 000000010b126001 CR4: 0000000000370ee0
[   16.855144] Call Trace:
[   16.857614]  clk_core_disable_lock+0x1b/0x30
[   16.861941]  intel_eth_pci_probe.cold+0x11d/0x136 [dwmac_intel]
[   16.867913]  pci_device_probe+0xcf/0x150
[   16.871890]  really_probe+0xf5/0x3e0
[   16.875526]  driver_probe_device+0x64/0x150
[   16.879763]  device_driver_attach+0x53/0x60
[   16.883998]  __driver_attach+0x9f/0x150
[   16.887883]  ? device_driver_attach+0x60/0x60
[   16.892288]  ? device_driver_attach+0x60/0x60
[   16.896698]  bus_for_each_dev+0x77/0xc0
[   16.900583]  bus_add_driver+0x184/0x1f0
[   16.904469]  driver_register+0x6c/0xc0
[   16.908268]  ? 0xffffffffc07ae000
[   16.911598]  do_one_initcall+0x4a/0x210
[   16.915489]  ? kmem_cache_alloc_trace+0x305/0x4e0
[   16.920247]  do_init_module+0x5c/0x230
[   16.924057]  load_module+0x2894/0x2b70
[   16.927857]  ? __do_sys_finit_module+0xb5/0x120
[   16.932441]  __do_sys_finit_module+0xb5/0x120
[   16.936845]  do_syscall_64+0x42/0x80
[   16.940476]  entry_SYSCALL_64_after_hwframe+0x44/0xae
[   16.945586] RIP: 0033:0x7f98830e5ccd
[   16.949177] Code: 00 c3 66 2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 93 31 0c 00 f7 d8 64 89 01 48
[   16.967970] RSP: 002b:00007ffc66b60168 EFLAGS: 00000246 ORIG_RAX: 0000000000000139
[   16.975583] RAX: ffffffffffffffda RBX: 000055885de35ef0 RCX: 00007f98830e5ccd
[   16.982725] RDX: 0000000000000000 RSI: 00007f98832541e3 RDI: 0000000000000012
[   16.989868] RBP: 0000000000020000 R08: 0000000000000000 R09: 0000000000000000
[   16.997042] R10: 0000000000000012 R11: 0000000000000246 R12: 00007f98832541e3
[   17.004222] R13: 0000000000000000 R14: 0000000000000000 R15: 00007ffc66b60328
[   17.011369] ---[ end trace df06a3dab26b988c ]---
[   17.016062] ------------[ cut here ]------------
[   17.020701] stmmac-0000:00:1e.5 already unprepared

Removing the stmmac_bus_clks_config() call in stmmac_dvr_probe and let
dwmac-intel to handle the unprepare and disable of the clk device.

Fixes: 5ec55823 ("net: stmmac: add clocks management for gmac driver")
Cc: Joakim Zhang <qiangqing.zhang@nxp.com>
Signed-off-by: NWong Vee Khee <vee.khee.wong@linux.intel.com>
Reviewed-by: NJoakim Zhang <qiangqing.zhang@nxp.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

On Intel platforms, not all safety features are enabled on the hardware.
The current implementation enable all safety features by default. This
will cause mass error and warning printouts after the module is loaded.

Introduce platform specific safety features flag to enable or disable
each safety features.
Signed-off-by: NWong Vee Khee <vee.khee.wong@linux.intel.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Fixed link does not need mdio bus and in that case mdio_bus_data will
not be allocated. Before using mdio_bus_data we should check for NULL.

This patch fix the kernel panic due to NULL pointer dereference of
mdio_bus_data when it is not allocated.

Without this patch we do see following kernel crash caused due to kernel
NULL pointer dereference.

Call trace:
stmmac_dvr_probe+0x3c/0x10b0
dwc_eth_dwmac_probe+0x224/0x378
platform_probe+0x68/0xe0
really_probe+0x130/0x3d8
driver_probe_device+0x68/0xd0
device_driver_attach+0x74/0x80
__driver_attach+0x58/0xf8
bus_for_each_dev+0x7c/0xd8
driver_attach+0x24/0x30
bus_add_driver+0x148/0x1f0
driver_register+0x64/0x120
__platform_driver_register+0x28/0x38
dwc_eth_dwmac_driver_init+0x1c/0x28
do_one_initcall+0x78/0x158
kernel_init_freeable+0x1f0/0x244
kernel_init+0x14/0x118
ret_from_fork+0x10/0x30
Code: f9002bfb 9113e2d9 910e6273 aa0003f7 (f9405c78)
---[ end trace 32d9d41562ddc081 ]---

Fixes: e5e5b771 ("net: stmmac: make in-band AN mode parsing is supported for non-DT")
Signed-off-by: NSriranjani P <sriranjani.p@samsung.com>
Signed-off-by: NPankaj Dubey <pankaj.dubey@samsung.com>
Link: https://lore.kernel.org/r/20210528071056.35252-1-sriranjani.p@samsung.comSigned-off-by: NJakub Kicinski <kuba@kernel.org>

Fix system hang with below sequences:
~# ifconfig ethx down
~# ifconfig ethx hw ether xx:xx:xx:xx:xx:xx

After ethx down, stmmac all clocks gated off and then register access causes
system hang.

Fixes: 5ec55823 ("net: stmmac: add clocks management for gmac driver")
Signed-off-by: NJoakim Zhang <qiangqing.zhang@nxp.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This should be a mistake to fix conflicts when removing RFC tag to
repost the patch.

Fixes: 5ec55823 ("net: stmmac: add clocks management for gmac driver")
Signed-off-by: NJoakim Zhang <qiangqing.zhang@nxp.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Make use of the xdp_{init,prepare}_buff() helpers instead of
an open-coded version.
Signed-off-by: NMatteo Croce <mcroce@microsoft.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Both get and set WoL will check device_can_wakeup(), if MAC supports PMT, it
will set device wakeup capability. After commit 1d8e5b0f ("net: stmmac:
Support WOL with phy"), device wakeup capability will be overwrite in
stmmac_init_phy() according to phy's Wol feature. If phy doesn't support WoL,
then MAC will lose wakeup capability. To fix this issue, only overwrite device
wakeup capability when MAC doesn't support PMT.

For STMMAC now driver checks MAC's WoL capability if MAC supports PMT, if
not support, driver will check PHY's WoL capability.

Fixes: 1d8e5b0f ("net: stmmac: Support WOL with phy")
Reviewed-by: NJisheng Zhang <Jisheng.Zhang@synaptics.com>
Signed-off-by: NJoakim Zhang <qiangqing.zhang@nxp.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The RX FIFO overflows when the system is not able to process all received
packets and they start accumulating (first in the DMA queue in memory,
then in the FIFO). An interrupt is then raised for each overflowing packet
and handled in stmmac_interrupt(). This is counter-productive, since it
brings the system (or more likely, one CPU core) to its knees to process
the FIFO overflow interrupts.

stmmac_interrupt() handles overflow interrupts by writing the rx tail ptr
into the corresponding hardware register (according to the MAC spec, this
has the effect of restarting the MAC DMA). However, without freeing any rx
descriptors, the DMA stops right away, and another overflow interrupt is
raised as the FIFO overflows again. Since the DMA is already restarted at
the end of stmmac_rx_refill() after freeing descriptors, disabling FIFO
overflow interrupts and the corresponding handling code has no side effect,
and eliminates the interrupt storm when the RX FIFO overflows.
Signed-off-by: NYannick Vignon <yannick.vignon@nxp.com>
Link: https://lore.kernel.org/r/20210506143312.20784-1-yannick.vignon@oss.nxp.comSigned-off-by: NJakub Kicinski <kuba@kernel.org>

An issue found when network interface is down and up again, FPE handshake
fails to trigger. This is due to __FPE_REMOVING bit remains being set in
stmmac_fpe_stop_wq() but not cleared in stmmac_fpe_start_wq(). This
cause FPE workqueue task, stmmac_fpe_lp_task() not able to be executed.

To fix this, add clearing __FPE_REMOVING bit in stmmac_fpe_start_wq().

Fixes: 5a558611 ("net: stmmac: support FPE link partner hand-shaking procedure")
Signed-off-by: NMohammad Athari Bin Ismail <mohammad.athari.ismail@intel.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

DWMAC Core 5.20 onwards supports HW descriptor prefetching.
Additionally, it also depends on platform specific RTL configuration.
This capability could be enabled by setting DMA_Mode bit-19 (DCHE).

So, to enable this cability, platform must set plat->dma_cfg->dche = true
and the DWMAC core version must be 5.20 onwards. Else, this capability
wouldn`t be configured
Signed-off-by: NMohammad Athari Bin Ismail <mohammad.athari.ismail@intel.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

TSO and TBS cannot co-exist and current implementation requires two
fixes:

 1) stmmac_open() does not need to call stmmac_enable_tbs() because
    the MAC is reset in stmmac_init_dma_engine() anyway.
 2) Inside stmmac_hw_setup(), we should call stmmac_enable_tso() for
    TX Q that is _not_ configured for TBS.

Fixes: 579a25a8 ("net: stmmac: Initial support for TBS")
Signed-off-by: NOng Boon Leong <boon.leong.ong@intel.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

On driver probe, kmemleak reported the following memory leak which was
due to allocated bitmap that was not being freed in stmmac_dvr_probe().

unreferenced object 0xffff9276014b13c0 (size 8):
  comm "systemd-udevd", pid 2143, jiffies 4294681112 (age 116.720s)
  hex dump (first 8 bytes):
    00 00 00 00 00 00 00 00                          ........
  backtrace:
    [<00000000c51e34b2>] stmmac_dvr_probe+0x1c0/0x440 [stmmac]
    [<00000000b530eb41>] intel_eth_pci_probe.cold+0x2b/0x14e [dwmac_intel]
    [<00000000b10f8929>] pci_device_probe+0xd2/0x150
    [<00000000fb254c74>] really_probe+0xf8/0x410
    [<0000000034128a59>] driver_probe_device+0x5d/0x150
    [<00000000016104d5>] device_driver_attach+0x53/0x60
    [<00000000cb18cd07>] __driver_attach+0x96/0x140
    [<00000000da9ffd5c>] bus_for_each_dev+0x7a/0xc0
    [<00000000af061a88>] bus_add_driver+0x184/0x1f0
    [<000000008be5c1c5>] driver_register+0x6c/0xc0
    [<0000000052b18a9e>] do_one_initcall+0x4d/0x210
    [<00000000154d4f07>] do_init_module+0x5c/0x230
    [<000000009b648d09>] load_module+0x2a5a/0x2d40
    [<000000000d86b76d>] __do_sys_finit_module+0xb5/0x120
    [<000000002b0cef95>] do_syscall_64+0x33/0x40
    [<0000000067b45bbb>] entry_SYSCALL_64_after_hwframe+0x44/0xa9

Fixes: bba2556e ("net: stmmac: Enable RX via AF_XDP zero-copy")
Cc: Ong Boon Leong <boon.leong.ong@intel.com>
Signed-off-by: NWong Vee Khee <vee.khee.wong@linux.intel.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This reverts commit 9c63faaa, which
introduces a suspend/resume regression on Jetson TX2 boards that can be
reproduced every time. Given that the issue that this was supposed to
fix only occurs very sporadically the safest course of action is to
revert before v5.12 and then we can have another go at fixing the more
rare issue in the next release (and perhaps backport it if necessary).

The root cause of the observed problem seems to be that when the system
is suspended, some packets are still in transit. When the descriptors
for these buffers are cleared on resume, the descriptors become invalid
and cause a fatal bus error.

Link: https://lore.kernel.org/r/708edb92-a5df-ecc4-3126-5ab36707e275@nvidia.com/Reported-by: NJonathan Hunter <jonathanh@nvidia.com>
Signed-off-by: NThierry Reding <treding@nvidia.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The Synopsis MAC controller supports auxiliary snapshot feature that
allows user to store a snapshot of the system time based on an external
event.

This patch add supports to the above mentioned feature. Users will be
able to triggered capturing the time snapshot from user-space using
application such as testptp or any other applications that uses the
PTP_EXTTS_REQUEST ioctl request.

Cc: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: NTan Tee Min <tee.min.tan@intel.com>
Co-developed-by: NWong Vee Khee <vee.khee.wong@linux.intel.com>
Signed-off-by: NWong Vee Khee <vee.khee.wong@linux.intel.com>
Acked-by: NRichard Cochran <richardcochran@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

We add the support of XDP ZC TX submission and cleaning into
stmmac_tx_clean(). The function is made to clean as many TX complete
frames as possible, i.e. limit by priv->dma_tx_size instead of NAPI
budget. For TX ring that is associated with XSK pool, the function
stmmac_xdp_xmit_zc() is introduced to TX frame buffers from XSK pool by
using xsk_tx_peek_desc(). To make stmmac_tx_clean() support the cleaning
of XSK TX frames, STMMAC_TXBUF_T_XSK_TX TX buffer type is introduced.

As stmmac_tx_clean() uses the return value to cue whether NAPI function
should continue to poll, we augment the caller of stmmac_tx_clean() to
pass NAPI budget instead of priv->dma_tx_size through 'budget' input and
made stmmac_tx_clean() to always clean up-to the TX ring size instead.
This allows us to use the return boolean status of stmmac_xdp_xmit_zc()
to decide if XSK TX work is done or not: If true, set 'xmits' to return
'budget - 1' so that NAPI poll may exit. Else, set 'xmits' to return
'budget' to make NAPI poll continue to poll since XSK TX work is not
done. Finally, at the end of stmmac_tx_clean(), the function now take
a maximum value between 'count' and 'xmits' so that status from both
TX cleaning and XSK TX (only for XDP ZC) is considered.

This patch adds a new NAPI poll called stmmac_napi_poll_rxtx() that is
meant to be enabled/disabled for RX and TX ring that are bound to XSK
pool. This NAPI poll function starts with cleaning TX ring, then submits
XSK TX frames to TX ring before proceed to perform RX operations, i.e.
, receiving RX frames and replenishing RX ring with RX free buffers
obtained from XSK pool. Therefore, during XSK RX and TX setup, the driver
enables stmmac_napi_poll_rxtx() for RX and TX operations, then during
XSK RX and TX pool tear-down, the driver reenables the exisiting
independent NAPI poll functions accordingly: stmmac_napi_poll_rx() and
stmmac_napi_poll_tx().
Signed-off-by: NOng Boon Leong <boon.leong.ong@intel.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch adds the support for receiving packet via AF_XDP zero-copy
mechanism.

XDP ZC uses 1:1 mapping of XDP buffer to receive packet, therefore the
use of split header is not used currently. The 'xdp_buff' is declared as
union together with a struct that contains 'page', 'addr' and
'page_offset' that are associated with primary buffer.

RX buffers are now allocated either via page_pool or xsk pool. For RX
buffers from xsk_pool they are allocated and deallocated using below
functions:

 * stmmac_alloc_rx_buffers_zc(struct stmmac_priv *priv, u32 queue)
 * dma_free_rx_xskbufs(struct stmmac_priv *priv, u32 queue)

With above functions now available, we then extend the following driver
functions to support XDP ZC:
 * stmmac_reinit_rx_buffers()
 * __init_dma_rx_desc_rings()
 * init_dma_rx_desc_rings()
 * __free_dma_rx_desc_resources()

Note: stmmac_alloc_rx_buffers_zc() may return -ENOMEM due to RX XDP
buffer pool is not allocated (e.g. samples/bpf/xdpsock TX-only). But,
it is still ok to let TX XDP ZC to continue, therefore, the -ENOMEM
is silently ignored to let the driver succcessfully transition to XDP
ZC mode for the said RX and TX queue.

As XDP ZC buffer size is different, the DMA buffer size is required
to be reprogrammed accordingly for RX DMA/Queue that is populated with
XDP buffer from XSK pool.

Next, to add or remove per-queue XSK pool, stmmac_xdp_setup_pool()
will call stmmac_xdp_enable_pool() or stmmac_xdp_disable_pool()
that in-turn coordinates the tearing down and setting up RX ring via
RX buffers and descriptors removal and reallocation through
stmmac_disable_rx_queue() and stmmac_enable_rx_queue(). In addition,
stmmac_xsk_wakeup() is added to initiate XDP RX buffer replenishing
by signalling user application to add available XDP frames back to
FILL queue.

For RX processing using XDP zero-copy buffer, stmmac_rx_zc() is
introduced which is implemented with the assumption that RX split
header is disabled. For XDP verdict is XDP_PASS, the XDP buffer is
copied into a sk_buff allocated through stmmac_construct_skb_zc()
and sent to Linux network GRO inside stmmac_dispatch_skb_zc(). Free RX
buffers are then replenished using stmmac_rx_refill_zc()

v2: introduce __stmmac_disable_all_queues() to contain the original code
    that does napi_disable() and then make stmmac_setup_tc_block_cb()
    to use it. Move synchronize_rcu() into stmmac_disable_all_queues()
    that eventually calls __stmmac_disable_all_queues(). Then,
    make both stmmac_release() and stmmac_suspend() to use
    stmmac_disable_all_queues(). Thanks David Miller for spotting the
    synchronize_rcu() issue in v1 patch.
Signed-off-by: NOng Boon Leong <boon.leong.ong@intel.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Prepare stmmac_xdp_run_prog() for AF_XDP zero-copy support which will be
added by upcoming patches by splitting out the XDP verdict processing
into __stmmac_xdp_run_prog() and it callable for XDP ZC path which does
not need to verify bpf_prog is not NULL.

The stmmac_xdp_run_prog() is used for regular XDP Rx path which requires
bpf_prog to be verified.
Signed-off-by: NOng Boon Leong <boon.leong.ong@intel.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Below functions are made to be per-queue in preparation of XDP ZC:

 __init_dma_rx_desc_rings(struct stmmac_priv *priv, u32 queue, gfp_t flags)
 __init_dma_tx_desc_rings(struct stmmac_priv *priv, u32 queue)

The original functions below are stay maintained for all queue usage:

 init_dma_rx_desc_rings(struct net_device *dev, gfp_t flags)
 init_dma_tx_desc_rings(struct net_device *dev)
Signed-off-by: NOng Boon Leong <boon.leong.ong@intel.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The per-queue RX buffer allocation in stmmac_reinit_rx_buffers() can be
made to use stmmac_alloc_rx_buffers() by merging the page_pool alloc
checks for "buf->page" and "buf->sec_page" in stmmac_init_rx_buffers().

This is in preparation for XSK pool allocation later.
Signed-off-by: NOng Boon Leong <boon.leong.ong@intel.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Rearrange RX buffer page_pool recycling logics into dma_recycle_rx_skbufs,
so that we prepare stmmac_reinit_rx_buffers() for XSK pool expansion.
Signed-off-by: NOng Boon Leong <boon.leong.ong@intel.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch restructures the per RX queue buffer allocation from page_pool
to stmmac_alloc_rx_buffers().

We also rearrange dma_free_rx_skbufs() so that it can be used in
init_dma_rx_desc_rings() during freeing of RX buffer in the event of
page_pool allocation failure to replace the more efficient method earlier.
The replacement is needed to make the RX buffer alloc and free method
scalable to XDP ZC xsk_pool alloc and free later.
Signed-off-by: NOng Boon Leong <boon.leong.ong@intel.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

of_get_mac_address() returns a "const void*" pointer to a MAC address.
Lately, support to fetch the MAC address by an NVMEM provider was added.
But this will only work with platform devices. It will not work with
PCI devices (e.g. of an integrated root complex) and esp. not with DSA
ports.

There is an of_* variant of the nvmem binding which works without
devices. The returned data of a nvmem_cell_read() has to be freed after
use. On the other hand the return of_get_mac_address() points to some
static data without a lifetime. The trick for now, was to allocate a
device resource managed buffer which is then returned. This will only
work if we have an actual device.

Change it, so that the caller of of_get_mac_address() has to supply a
buffer where the MAC address is written to. Unfortunately, this will
touch all drivers which use the of_get_mac_address().

Usually the code looks like:

  const char *addr;
  addr = of_get_mac_address(np);
  if (!IS_ERR(addr))
    ether_addr_copy(ndev->dev_addr, addr);

This can then be simply rewritten as:

  of_get_mac_address(np, ndev->dev_addr);

Sometimes is_valid_ether_addr() is used to test the MAC address.
of_get_mac_address() already makes sure, it just returns a valid MAC
address. Thus we can just test its return code. But we have to be
careful if there are still other sources for the MAC address before the
of_get_mac_address(). In this case we have to keep the
is_valid_ether_addr() call.

The following coccinelle patch was used to convert common cases to the
new style. Afterwards, I've manually gone over the drivers and fixed the
return code variable: either used a new one or if one was already
available use that. Mansour Moufid, thanks for that coccinelle patch!

<spml>
@a@
identifier x;
expression y, z;
@@
- x = of_get_mac_address(y);
+ x = of_get_mac_address(y, z);
  <...
- ether_addr_copy(z, x);
  ...>

@@
identifier a.x;
@@
- if (<+... x ...+>) {}

@@
identifier a.x;
@@
  if (<+... x ...+>) {
      ...
  }
- else {}

@@
identifier a.x;
expression e;
@@
- if (<+... x ...+>@e)
-     {}
- else
+ if (!(e))
      {...}

@@
expression x, y, z;
@@
- x = of_get_mac_address(y, z);
+ of_get_mac_address(y, z);
  ... when != x
</spml>

All drivers, except drivers/net/ethernet/aeroflex/greth.c, were
compile-time tested.
Suggested-by: NAndrew Lunn <andrew@lunn.ch>
Signed-off-by: NMichael Walle <michael@walle.cc>
Reviewed-by: NAndrew Lunn <andrew@lunn.ch>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch adds the support of XDP_REDIRECT to another remote cpu for
further action. It also implements ndo_xdp_xmit ops, enabling the driver
to transmit packets forwarded to it by XDP program running on another
interface.

This patch has been tested using "xdp_redirect_cpu" for XDP_REDIRECT
+ drop testing. It also been tested with "xdp_redirect" sample app
which can be used to exercise ndo_xdp_xmit ops. The burst traffics are
generated using pktgen_sample03_burst_single_flow.sh in samples/pktgen
directory.

v4: Move xdp_do_flush() processing into stmmac_finalize_xdp_rx() and
    combined the XDP verdict of XDP TX and REDIRECT together.

v3: Added 'nq->trans_start = jiffies' to avoid TX time-out as we are
    sharing TX queue between slow path and XDP. Thanks to Jakub Kicinski
    for point out.
Signed-off-by: NOng Boon Leong <boon.leong.ong@intel.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch adds support for XDP_TX action which enables XDP program to
transmit back received frames.

This patch has been tested with the "xdp2" app located in samples/bpf
dir. The DUT receives burst traffic packet generated using pktgen script
'pktgen_sample03_burst_single_flow.sh'.

v4: Moved stmmac_tx_timer_arm() to be done once at the end of NAPI RX.
    Fixed stmmac_xdp_xmit_back() to return STMMAC_XDP_CONSUMED if
    XDP buffer to frame conversion fails. Thanks to Jakub's input.

v3: Added 'nq->trans_start = jiffies' to avoid TX time-out as we are
    sharing TX queue between slow path and XDP. Thanks to Jakub Kicinski
    for pointing out.
Signed-off-by: NOng Boon Leong <boon.leong.ong@intel.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>