Lockdep reports that we may deadlock because we take the RTNL on
the work struct, but flush it under RTNL. Clearly, it's correct.
In practice, this can happen when doing rfkill on an active device.

Fix this by moving the work struct to the wiphy (registered dev)
layer, and iterate over all the wdevs inside there. This then
means we need to track which one of them has work to do, so we
don't update to the driver for all wdevs all the time.

Also fix a locking bug I noticed while working on this - the
registrations list is iterated as if it was an RCU list, but it
isn't handle that way - and we need to lock now for the update
flag anyway, so remove the RCU.

Fixes: 6cd536fe ("cfg80211: change internal management frame registration API")
Reported-by: NMarkus Theil <markus.theil@tu-ilmenau.de>
Reported-and-tested-by: NKenneth R. Crudup <kenny@panix.com>
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
Link: https://lore.kernel.org/r/20200604120420.b1dc540a7e26.I55dcca56bb5bdc5d7ad66a36a0b42afd7034d8be@changeidSigned-off-by: NJohannes Berg <johannes.berg@intel.com>

With some newer AKMs, the KCK and KEK are bigger, so allow that
if the driver advertises support for it. In addition, add a new
attribute for the AKM so we can use it for offloaded rekeying.
Signed-off-by: NNathan Errera <nathan.errera@intel.com>
[reword commit message]
Link: https://lore.kernel.org/r/20200528212237.5eb58b00a5d1.I61b09d77c4f382e8d58a05dcca78096e99a6bc15@changeidSigned-off-by: NJohannes Berg <johannes.berg@intel.com>

On 6 GHz, the 6 GHz capabilities element should be added, do that.
Signed-off-by: NIlan Peer <ilan.peer@intel.com>
[add commit message]
Link: https://lore.kernel.org/r/20200528213443.8ee764f0cde0.I2b0c66b60e11818c97c9803e04a6a197c6376243@changeidSigned-off-by: NJohannes Berg <johannes.berg@intel.com>

These capabilities cover what would otherwise be transported
in HT/VHT capabilities, but only a subset thereof that is
actually needed on 6 GHz with HE already present. Expose the
capabilities to userspace, drivers are expected to set them
as using the 6 GHz band (currently) requires HE capability.

Link: https://lore.kernel.org/r/20200528213443.244cd5cb9db8.Icd8c773277a88c837e7e3af1d4d1013cc3b66543@changeidSigned-off-by: NJohannes Berg <johannes.berg@intel.com>

Handle 6 GHz HE capability while adding new station. It will be used
later in mac80211 station processing.
Signed-off-by: NRajkumar Manoharan <rmanohar@codeaurora.org>
Link: https://lore.kernel.org/r/1589399105-25472-2-git-send-email-rmanohar@codeaurora.org
[handle nl80211_set_station, require WME,
 remove NL80211_HE_6GHZ_CAPABILITY_LEN]
Link: https://lore.kernel.org/r/20200528213443.b6b711fd4312.Ic9b97d57b6c4f2b28d4b2d23d2849d8bc20bd8cc@changeidSigned-off-by: NJohannes Berg <johannes.berg@intel.com>

This allows identifying whether or not a channel is a PSC
(preferred scanning channel).

Link: https://lore.kernel.org/r/20200528213443.414363ecf62c.Ic15e681a0e249eab7350a06ceb582cca8bb9a080@changeidSigned-off-by: NJohannes Berg <johannes.berg@intel.com>

This patch adds support to configure per TID Tx Rate configuration
through NL80211_TID_CONFIG_ATTR_TX_RATE* attributes. And it uses
nl80211_parse_tx_bitrate_mask api to validate the Tx rate mask.
Signed-off-by: NTamizh Chelvam <tamizhr@codeaurora.org>
Link: https://lore.kernel.org/r/1589357504-10175-1-git-send-email-tamizhr@codeaurora.orgSigned-off-by: NJohannes Berg <johannes.berg@intel.com>

This adds the necessary capabilities in nl80211 to allow drivers to
assign a cookie to control port TX frames (returned via extack in
the netlink ACK message of the command) and then later report the
frame's status.
Signed-off-by: NMarkus Theil <markus.theil@tu-ilmenau.de>
Link: https://lore.kernel.org/r/20200508144202.7678-2-markus.theil@tu-ilmenau.de
[use extack cookie instead of explicit message, recombine patches]
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>

The current codebase makes use of the zero-length array language
extension to the C90 standard, but the preferred mechanism to declare
variable-length types such as these ones is a flexible array member[1][2],
introduced in C99:

struct foo {
        int stuff;
        struct boo array[];
};

By making use of the mechanism above, we will get a compiler warning
in case the flexible array does not occur last in the structure, which
will help us prevent some kind of undefined behavior bugs from being
inadvertently introduced[3] to the codebase from now on.

Also, notice that, dynamic memory allocations won't be affected by
this change:

"Flexible array members have incomplete type, and so the sizeof operator
may not be applied. As a quirk of the original implementation of
zero-length arrays, sizeof evaluates to zero."[1]

sizeof(flexible-array-member) triggers a warning because flexible array
members have incomplete type[1]. There are some instances of code in
which the sizeof operator is being incorrectly/erroneously applied to
zero-length arrays and the result is zero. Such instances may be hiding
some bugs. So, this work (flexible-array member conversions) will also
help to get completely rid of those sorts of issues.

This issue was found with the help of Coccinelle.

[1] https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.html
[2] https://github.com/KSPP/linux/issues/21
[3] commit 76497732 ("cxgb3/l2t: Fix undefined behaviour")
Signed-off-by: NGustavo A. R. Silva <gustavoars@kernel.org>
Link: https://lore.kernel.org/r/20200507183909.GA12993@embeddedorSigned-off-by: NJohannes Berg <johannes.berg@intel.com>

Drivers may wish to report the RX frequency in units of
KHz. Provide cfg80211_rx_mgmt_khz() and wrap it with
cfg80211_rx_mgmt() so exisiting drivers which can't report
KHz anyway don't need to change. Add a similar wrapper for
cfg80211_report_obss_beacon() so the frequency units stay
somewhat consistent.

This doesn't actually change the nl80211 API yet.
Signed-off-by: NThomas Pedersen <thomas@adapt-ip.com>
Link: https://lore.kernel.org/r/20200430172554.18383-2-thomas@adapt-ip.com
[fix mac80211 calling the non-khz version of obss beacon report,
 drop trace point name changes]
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>

This patch adds support to control per TID MSDU aggregation
using the NL80211_TID_CONFIG_ATTR_AMSDU_CTRL attribute.
Signed-off-by: NSergey Matyukevich <sergey.matyukevich.os@quantenna.com>
Link: https://lore.kernel.org/r/20200424112905.26770-4-sergey.matyukevich.os@quantenna.comSigned-off-by: NJohannes Berg <johannes.berg@intel.com>

TIDs mask type is u64 in wiphy settings and nl80211 processing, see:
- wiphy TIDs mask sizes in tid_config_support structure
- prepare driver command in parse_tid_conf

Use the same type for TIDs mask in cfg80211_tid_cfg.
Signed-off-by: NSergey Matyukevich <sergey.matyukevich.os@quantenna.com>
Link: https://lore.kernel.org/r/20200424112905.26770-2-sergey.matyukevich.os@quantenna.comSigned-off-by: NJohannes Berg <johannes.berg@intel.com>

- add SPDX header;
- adjust title markup;
- mark code blocks and literals as such;
- adjust identation, whitespaces and blank lines where needed;
- add to networking/index.rst.
Signed-off-by: NMauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Some bands (S1G) define channels centered on a non-integer
MHz. Give ieee80211_channel and cfg80211_chan_def a
freq_offset component where the final frequency can be
expressed as:

MHZ_TO_KHZ(chan->center_freq) + chan->freq_offset;

Also provide some helper functions to do the frequency
conversion and test for equality.

Retain the existing interface to frequency and channel
conversion helpers, and expose new ones which handle
frequencies in units of KHz.

Some internal functions (net/wireless/chan.c) pass around
a frequency value. Convert these to units of KHz.

mesh, ibss, wext, etc. are currently ignored.
Signed-off-by: NThomas Pedersen <thomas@adapt-ip.com>
Link: https://lore.kernel.org/r/20200402011810.22947-3-thomas@adapt-ip.comSigned-off-by: NJohannes Berg <johannes.berg@intel.com>

This extends the support for drivers that rebuilds IEs in the
FW (same as with HT/VHT).
Signed-off-by: NIlan Peer <ilan.peer@intel.com>
Signed-off-by: NLuca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20200326150855.20feaabfb484.I886252639604c8e3e84b8ef97962f1b0e4beec81@changeidSigned-off-by: NJohannes Berg <johannes.berg@intel.com>

For DPP, there's a need to receive multicast action frames,
but many drivers need a special filter configuration for this.

Support announcing from userspace in the management registration
that multicast RX is required, with an extended feature flag if
the driver handles this.
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
Reviewed-by: NSergey Matyukevich <sergey.matyukevich.os@quantenna.com>
Link: https://lore.kernel.org/r/20200417124013.c46238801048.Ib041d437ce0bff28a0c6d5dc915f68f1d8591002@changeidSigned-off-by: NJohannes Berg <johannes.berg@intel.com>

Almost all drivers below cfg80211 get the API wrong (except for
cfg80211) and are unable to cope with multiple registrations for
the same frame type, which is valid due to the match filter.
This seems to indicate the API is wrong, and we should maintain
the full information in cfg80211 instead of the drivers.

Change the API to no longer inform the driver about individual
registrations and unregistrations, but rather every time about
the entire state of the entire wiphy and single wdev, whenever
it may have changed. This also simplifies the code in cfg80211
as it no longer has to track exactly what was unregistered and
can free things immediately.
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
Acked-by: NArend van Spriel <arend.vanspriel@broadcom.com>
Reviewed-by: NSergey Matyukevich <sergey.matyukevich.os@quantenna.com>
Link: https://lore.kernel.org/r/20200417124300.f47f3828afc8.I7f81ef59c2c5a340d7075fb3c6d0e08e8aeffe07@changeidSigned-off-by: NJohannes Berg <johannes.berg@intel.com>

Extend cfg80211_rx_unprot_mlme_mgmt() to cover indication of unprotected
Beacon frames in addition to the previously used Deauthentication and
Disassociation frames. The Beacon frame case is quite similar, but has
couple of exceptions: this is used both with fully unprotected and also
incorrectly protected frames and there is a rate limit on the events to
avoid unnecessary flooding netlink events in case something goes wrong.
Signed-off-by: NJouni Malinen <jouni@codeaurora.org>
Link: https://lore.kernel.org/r/20200401142548.6990-1-jouni@codeaurora.org
[add missing kernel-doc]
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>

Update missing kernel-doc annotations and fix of related warnings
at 'make htmldocs'.
Signed-off-by: NLothar Rubusch <l.rubusch@gmail.com>
Link: https://lore.kernel.org/r/20200408231013.28370-1-l.rubusch@gmail.com
[fix indentation, attribute references]
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>

Drivers that trigger roaming need to know the lifetime of the configured
PMKSA for deciding whether to trigger the full or PMKSA cache based
authentication. The configured PMKSA is invalid after the PMK lifetime
has expired and must not be used after that and the STA needs to
disassociate if the PMK expires. Hence the STA is expected to refresh
the PMK with a full authentication before this happens (e.g., when
reassociating to a new BSS the next time or by performing EAPOL
reauthentication depending on the AKM) to avoid unnecessary
disconnection.

The PMK reauthentication threshold is the percentage of the PMK lifetime
value and indicates to the driver to trigger a full authentication roam
(without PMKSA caching) after the reauthentication threshold time, but
before the PMK timer has expired. Authentication methods like SAE need
to be able to generate a new PMKSA entry without having to force a
disconnection after this threshold timeout. If no roaming occurs between
the reauthentication threshold time and PMK lifetime expiration,
disassociation is still forced.

The new attributes for providing these values correspond to the dot11
MIB variables dot11RSNAConfigPMKLifetime and
dot11RSNAConfigPMKReauthThreshold.

This type of functionality is already available in cases where user
space component is in control of roaming. This commit extends that same
capability into cases where parts or all of this functionality is
offloaded to the driver.
Signed-off-by: NVeerendranath Jakkam <vjakkam@codeaurora.org>
Signed-off-by: NJouni Malinen <jouni@codeaurora.org>
Link: https://lore.kernel.org/r/20200312235903.18462-1-jouni@codeaurora.orgSigned-off-by: NJohannes Berg <johannes.berg@intel.com>

Pass the AP's HE operation element to the driver.
Signed-off-by: NShaul Triebitz <shaul.triebitz@intel.com>
Signed-off-by: NLuca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/20200131111300.891737-18-luca@coelho.fiSigned-off-by: NJohannes Berg <johannes.berg@intel.com>

Add support for requesting that the ranging measurement will use
the trigger-based / non trigger-based flow instead of the EDCA based
flow.
Signed-off-by: NAvraham Stern <avraham.stern@intel.com>
Signed-off-by: NLuca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/20200131111300.891737-2-luca@coelho.fiSigned-off-by: NJohannes Berg <johannes.berg@intel.com>

This patch adds support for disabling pre-auth rx over the nl80211 control
port for mac80211.
Signed-off-by: NMarkus Theil <markus.theil@tu-ilmenau.de>
Link: https://lore.kernel.org/r/20200312091055.54257-3-markus.theil@tu-ilmenau.de
[fix indentation slightly, squash feature enablement]
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>

Kernel-doc complains if the line isn't prefixed with an
asterisk, fix that.
Reported-by: NStephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
Link: https://lore.kernel.org/r/20200320144110.2786ad5fb234.I369d103d11c71e39e3a3f97ed68a528c5b875f1e@changeidSigned-off-by: NJohannes Berg <johannes.berg@intel.com>

This patch adds support to configure per TID RTSCTS control
configuration to enable/disable through the
NL80211_TID_CONFIG_ATTR_RTSCTS_CTRL attribute.
Signed-off-by: NTamizh chelvam <tamizhr@codeaurora.org>
Link: https://lore.kernel.org/r/1579506687-18296-5-git-send-email-tamizhr@codeaurora.orgSigned-off-by: NJohannes Berg <johannes.berg@intel.com>

This patch adds support to configure per TID AMPDU control
configuration to enable/disable aggregation through the
NL80211_TID_CONFIG_ATTR_AMPDU_CTRL attribute.
Signed-off-by: NTamizh chelvam <tamizhr@codeaurora.org>
Link: https://lore.kernel.org/r/1579506687-18296-4-git-send-email-tamizhr@codeaurora.orgSigned-off-by: NJohannes Berg <johannes.berg@intel.com>

This patch adds support to configure per TID retry configuration
through the NL80211_TID_CONFIG_ATTR_RETRY_SHORT and
NL80211_TID_CONFIG_ATTR_RETRY_LONG attributes. This TID specific
retry configuration will have more precedence than phy level
configuration.
Signed-off-by: NTamizh chelvam <tamizhr@codeaurora.org>
Link: https://lore.kernel.org/r/1579506687-18296-3-git-send-email-tamizhr@codeaurora.org
[rebase completely on top of my previous API changes]
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>

Make some changes to the TID-config API:
 * use u16 in nl80211 (only, and restrict to using 8 bits for now),
   to avoid issues in the future if we ever want to use higher TIDs.
 * reject empty TIDs mask (via netlink policy)
 * change feature advertising to not use extended feature flags but
   have own mechanism for this, which simplifies the code
 * fix all variable names from 'tid' to 'tids' since it's a mask
 * change to cfg80211_ name prefixes, not ieee80211_
 * fix some minor docs/spelling things.

Change-Id: Ia234d464b3f914cdeab82f540e018855be580dce
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>

Add the new NL80211_CMD_SET_TID_CONFIG command to support
data TID specific configuration. Per TID configuration is
passed in the nested NL80211_ATTR_TID_CONFIG attribute.

This patch adds support to configure per TID noack policy
through the NL80211_TID_CONFIG_ATTR_NOACK attribute.
Signed-off-by: NTamizh chelvam <tamizhr@codeaurora.org>
Link: https://lore.kernel.org/r/1579506687-18296-2-git-send-email-tamizhr@codeaurora.orgSigned-off-by: NJohannes Berg <johannes.berg@intel.com>

IEEE P802.11-REVmd/D3.0 adds support for protecting Beacon frames using
a new set of keys (BIGTK; key index 6..7) similarly to the way
group-addressed Robust Management frames are protected (IGTK; key index
4..5). Extend cfg80211 and nl80211 to allow the new BIGTK to be
configured. Add an extended feature flag to indicate driver support for
the new key index values to avoid array overflows in driver
implementations and also to indicate to user space when this
functionality is available.
Signed-off-by: NJouni Malinen <jouni@codeaurora.org>
Link: https://lore.kernel.org/r/20200222132548.20835-2-jouni@codeaurora.orgSigned-off-by: NJohannes Berg <johannes.berg@intel.com>

Signed-off-by: NJérôme Pouiller <jerome.pouiller@silabs.com>
Link: https://lore.kernel.org/r/20200221115604.594035-10-Jerome.Pouiller@silabs.comSigned-off-by: NJohannes Berg <johannes.berg@intel.com>

The field "dev" was documented on two places. This patch merges the
comments.
Signed-off-by: NJérôme Pouiller <jerome.pouiller@silabs.com>
Link: https://lore.kernel.org/r/20200221115604.594035-8-Jerome.Pouiller@silabs.comSigned-off-by: NJohannes Berg <johannes.berg@intel.com>

The field "privid" is documented twice. Comments were more or less the
same. The patch merge them.
Signed-off-by: NJérôme Pouiller <jerome.pouiller@silabs.com>
Link: https://lore.kernel.org/r/20200221115604.594035-7-Jerome.Pouiller@silabs.comSigned-off-by: NJohannes Berg <johannes.berg@intel.com>

The field "reg_notifier" was already documented above the definition of
struct wiphy. The comment inside the definition of the struct did not
bring more information.
Signed-off-by: NJérôme Pouiller <jerome.pouiller@silabs.com>
Link: https://lore.kernel.org/r/20200221115604.594035-6-Jerome.Pouiller@silabs.comSigned-off-by: NJohannes Berg <johannes.berg@intel.com>

The field "perm_addr" was already documented above the definition of
struct wiphy. Comments were almost identical.
Signed-off-by: NJérôme Pouiller <jerome.pouiller@silabs.com>
Link: https://lore.kernel.org/r/20200221115604.594035-5-Jerome.Pouiller@silabs.comSigned-off-by: NJohannes Berg <johannes.berg@intel.com>

The field "_net" was already documented above the definition of struct
wiphy. Both comments were identical.
Signed-off-by: NJérôme Pouiller <jerome.pouiller@silabs.com>
Link: https://lore.kernel.org/r/20200221115604.594035-4-Jerome.Pouiller@silabs.comSigned-off-by: NJohannes Berg <johannes.berg@intel.com>

Field "registered" was documented three times: twice in the
documentation block of struct wiphy and once inside the struct
definition. This patch keep only one comment.
Signed-off-by: NJérôme Pouiller <jerome.pouiller@silabs.com>
Link: https://lore.kernel.org/r/20200221115604.594035-3-Jerome.Pouiller@silabs.comSigned-off-by: NJohannes Berg <johannes.berg@intel.com>

The field "privid" was already documented above the definition of struct
wiphy. Comments were not identical, but they said more or less the same
thing.
Signed-off-by: NJérôme Pouiller <jerome.pouiller@silabs.com>
Link: https://lore.kernel.org/r/20200221115604.594035-2-Jerome.Pouiller@silabs.comSigned-off-by: NJohannes Berg <johannes.berg@intel.com>

The field "probe_resp_offload" was already documented above the
definition of struct wiphy. Both comments were identical.
Signed-off-by: NJérôme Pouiller <jerome.pouiller@silabs.com>
Link: https://lore.kernel.org/r/20200221115604.594035-1-Jerome.Pouiller@silabs.comSigned-off-by: NJohannes Berg <johannes.berg@intel.com>

This reverts commit 8c3ed7aa.

As Jouni points out, there's really no need for this, since the
RSN pre-authentication frames are normal data frames, not port
control frames (locally).

We can still revert this now since it hasn't actually gone beyond
-next.

Fixes: 8c3ed7aa ("nl80211: add src and dst addr attributes for control port tx/rx")
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
Link: https://lore.kernel.org/r/20200224101910.b746e263287a.I9eb15d6895515179d50964dec3550c9dc784bb93@changeidSigned-off-by: NJohannes Berg <johannes.berg@intel.com>