This patch checks if the CEC device is well created at intialization
time.
Tested-by: NRussell King <rmk+kernel@arm.linux.org.uk>
Acked-by: NRussell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: NJean-Francois Moine <moinejf@free.fr>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

The AIF has an uninitialized byte. This patch clears the whole buffer
before filling it.
Tested-by: NRussell King <rmk+kernel@arm.linux.org.uk>
Acked-by: NRussell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: NJean-Francois Moine <moinejf@free.fr>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Tested-by: NSebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Reviewed-by: NRob Clark <robdclark@gmail.com>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Fix a bug that was introduced in commit c4c11dd1 ("drm/i2c: tda998x:
add video and audio input configuration") when Sebastian cleaned up my
original patch.  Without this being fixed, audio is muted when the
display is turned off, never to be re-enabled.
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
Cc: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Cc: Darren Etheridge <detheridge@ti.com>
Cc: Dave Airlie <airlied@redhat.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Suppress warning of unused-variables by adding a BUG()+return for invalid
audio-formats.

Cc: Rob Clark <robdclark@gmail.com>
Signed-off-by: NDavid Herrmann <dh.herrmann@gmail.com>
Signed-off-by: NDave Airlie <airlied@gmail.com>

Some LCD controller cannot provide valid VESA style sync, i.e. coincident
HS/VS edges. First, this patch adds hskew passed from the adjusted_mode to
reference pixel calculation to allow those controllers to add an offset
relative to the expected reference pixel.
Signed-off-by: NDarren Etheridge <detheridge@ti.com>
Signed-off-by: NSebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Tested-by: NRussell King <rmk_kernel@arm.linux.org.uk>
Signed-off-by: NDave Airlie <airlied@redhat.com>

This fixes the wrong sync generation and sync calculation of TDA998x
for HS/VS-based sync detection.
Signed-off-by: NSebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Tested-by: NDarren Etheridge <detheridge@ti.com>
Tested-by: NRussell King <rmk_kernel@arm.linux.org.uk>
Signed-off-by: NDave Airlie <airlied@redhat.com>

This patch adds tda998x specific parameters to allow it to be configured
for different boards using it. Also, this implements rudimentary audio
support for S/PDIF attached controllers.
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: NSebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Tested-by: NDarren Etheridge <detheridge@ti.com>
Tested-by: NRussell King <rmk_kernel@arm.linux.org.uk>
Tested-by: NRussell King <rmk_kernel@arm.linux.org.uk>
Signed-off-by: NDave Airlie <airlied@redhat.com>

The video-input-port (VIP) is highly configurable. This prepares
current driver to allow to configure VIP configuration, as some
boards connect lcd controller and TDA998x "pin-swapped" and depend
on VIP to swap the pins by register configuration.
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
Tested-by: NDarren Etheridge <detheridge@ti.com>
Tested-by: NSebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Tested-by: NRussell King <rmk_kernel@arm.linux.org.uk>
Signed-off-by: NDave Airlie <airlied@redhat.com>

The npix/nline registers are supposed to be programmed with the total
number of pixels/lines, not the displayed pixels/lines, and not minus
one either.
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
Tested-by: NDarren Etheridge <detheridge@ti.com>
Tested-by: NSebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Tested-by: NRussell King <rmk_kernel@arm.linux.org.uk>
Signed-off-by: NDave Airlie <airlied@redhat.com>

When switching between various drivers for this device, it's possible
that some critical registers are left containing values which affect
the device operation.  One such case encountered is the VIP output
mux register.  This defaults to 0x24 on powerup, but other drivers may
set this to 0x12.  This results in incorrect colours.

Fix this by ensuring that the register is always set to the power on
default setting.
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
Tested-by: NDarren Etheridge <detheridge@ti.com>
Tested-by: NSebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Tested-by: NRussell King <rmk_kernel@arm.linux.org.uk>
Signed-off-by: NDave Airlie <airlied@redhat.com>

TDA19988 devices need their RAM enabled in order to read EDID
information.  Add support for this.
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: NRob Clark <robdclark@gmail.com>
Tested-by: NDarren Etheridge <detheridge@ti.com>
Tested-by: NSebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Tested-by: NRussell King <rmk_kernel@arm.linux.org.uk>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Driver for the NXP TDA998X i2c hdmi encoder slave.

v1: original
v2: fix npix/nline programming
v3: add Kconfig, fix dup'd MODULE_DESCRIPTION
Signed-off-by: NRob Clark <robdclark@gmail.com>
Reviewed-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Tested-by: NKoen Kooi <koen@dominion.thruhere.net>