If a queue is preempted before it gets slice assigned, the queue doesn't get
compensation, which looks unfair. For such queue, we compensate it for a whole
slice.
Signed-off-by: NShaohua Li <shaohua.li@intel.com>
Signed-off-by: NJens Axboe <jaxboe@fusionio.com>

I got this:
             fio-874   [007]  2157.724514:   8,32   m   N cfq874 preempt
             fio-874   [007]  2157.724519:   8,32   m   N cfq830 slice expired t=1
             fio-874   [007]  2157.724520:   8,32   m   N cfq830 sl_used=1 disp=0 charge=1 iops=0 sect=0
             fio-874   [007]  2157.724521:   8,32   m   N cfq830 set_active wl_prio:0 wl_type:0
             fio-874   [007]  2157.724522:   8,32   m   N cfq830 Not idling. st->count:1

cfq830 is an async queue, and preempted by a sync queue cfq874. But since we
have cfqg->saved_workload_slice mechanism, the preempt is a nop.
Looks currently our preempt is totally broken if the two queues are not from
the same workload type.
Below patch fixes it. This will might make async queue starvation, but it's
what our old code does before cgroup is added.
Signed-off-by: NShaohua Li <shaohua.li@intel.com>
Signed-off-by: NJens Axboe <jaxboe@fusionio.com>

cfq_group->ref is used with queue_lock hold, the only exception is
cfq_set_request, which looks like a bug to me, so ref doesn't need
to be an atomic and atomic operation is slower.
Signed-off-by: NShaohua Li <shaohua.li@intel.com>
Reviewed-by: NJeff Moyer <jmoyer@redhat.com>
Acked-by: NVivek Goyal <vgoyal@redhat.com>
Signed-off-by: NJens Axboe <jaxboe@fusionio.com>

cfq_queue->ref is used with queue_lock hold, so ref doesn't need to be an atomic
and atomic operation is slower.
Signed-off-by: NShaohua Li <shaohua.li@intel.com>
Reviewed-by: NJeff Moyer <jmoyer@redhat.com>
Acked-by: NVivek Goyal <vgoyal@redhat.com>
Signed-off-by: NJens Axboe <jaxboe@fusionio.com>

We can't use krefs since it's apparently restricted to very basic
reference counting.

This reverts commit e4a683c8.
Signed-off-by: NJens Axboe <jaxboe@fusionio.com>

/proc/diskstats would display a strange output as follows.

$ cat /proc/diskstats |grep sda
   8       0 sda 90524 7579 102154 20464 0 0 0 0 0 14096 20089
   8       1 sda1 19085 1352 21841 4209 0 0 0 0 4294967064 15689 4293424691
                                                ~~~~~~~~~~
   8       2 sda2 71252 3624 74891 15950 0 0 0 0 232 23995 1562390
   8       3 sda3 54 487 2188 92 0 0 0 0 0 88 92
   8       4 sda4 4 0 8 0 0 0 0 0 0 0 0
   8       5 sda5 81 2027 2130 138 0 0 0 0 0 87 137

Its reason is the wrong way of accounting hd_struct->in_flight. When a bio is
merged into a request belongs to different partition by ELEVATOR_FRONT_MERGE.

The detailed root cause is as follows.

Assuming that there are two partition, sda1 and sda2.

1. A request for sda2 is in request_queue. Hence sda1's hd_struct->in_flight
   is 0 and sda2's one is 1.

        | hd_struct->in_flight
   ---------------------------
   sda1 |          0
   sda2 |          1
   ---------------------------

2. A bio belongs to sda1 is issued and is merged into the request mentioned on
   step1 by ELEVATOR_BACK_MERGE. The first sector of the request is changed
   from sda2 region to sda1 region. However the two partition's
   hd_struct->in_flight are not changed.

        | hd_struct->in_flight
   ---------------------------
   sda1 |          0
   sda2 |          1
   ---------------------------

3. The request is finished and blk_account_io_done() is called. In this case,
   sda2's hd_struct->in_flight, not a sda1's one, is decremented.

        | hd_struct->in_flight
   ---------------------------
   sda1 |         -1
   sda2 |          1
   ---------------------------

The patch fixes the problem by caching the partition lookup
inside the request structure, hence making sure that the increment
and decrement will always happen on the same partition struct. This
also speeds up IO with accounting enabled, since it cuts down on
the number of lookups we have to do.

Also add a refcount to struct hd_struct to keep the partition in
memory as long as users exist. We use kref_test_and_get() to ensure
we don't add a reference to a partition which is going away.
Signed-off-by: NJerome Marchand <jmarchan@redhat.com>
Signed-off-by: NYasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com>
Cc: stable@kernel.org
Signed-off-by: NJens Axboe <jaxboe@fusionio.com>

kblockd is used for unplugging and may affect IO latency and
throughput and the max number of concurrent work items are bound by
the number of block devices.  Make it HIGHPRI workqueue w/ default max
concurrency.
Signed-off-by: NTejun Heo <tj@kernel.org>
Signed-off-by: NJens Axboe <jaxboe@fusionio.com>

This patch fixes a spelling error in a source code comment and removes
superfluous braces in the function exit_io_context().
Signed-off-by: NBart Van Assche <bvanassche@acm.org>
Cc: Jens Axboe <jaxboe@fusionio.com>
Signed-off-by: NJens Axboe <jaxboe@fusionio.com>

The major/minor device numbers are always defined and used as `unsigned'.
Signed-off-by: NYang Zhang <kthreadd@gmail.com>
Signed-off-by: NJens Axboe <jaxboe@fusionio.com>

Signed-off-by: NYang Zhang <kthreadd@gmail.com>
Signed-off-by: NJens Axboe <jaxboe@fusionio.com>

When cfq_choose_cfqg() is called in select_queue(), there must be at least one
backlogged CFQ queue waiting for dispatching, hence there must be at least one
backlogged CFQ group on service tree. So we never call choose_service_tree()
with cfqg == NULL.
Signed-off-by: NGui Jianfeng <guijianfeng@cn.fujitsu.com>
Reviewed-by: NJeff Moyer <jmoyer@redhat.com>
Acked-by: NVivek Goyal <vgoyal@redhat.com>
Signed-off-by: NJens Axboe <jaxboe@fusionio.com>

Implement blk_limits_max_hw_sectors() and make
blk_queue_max_hw_sectors() a wrapper around it.

DM needs this to avoid setting queue_limits' max_hw_sectors and
max_sectors directly.  dm_set_device_limits() now leverages
blk_limits_max_hw_sectors() logic to establish the appropriate
max_hw_sectors minimum (PAGE_SIZE).  Fixes issue where DM was
incorrectly setting max_sectors rather than max_hw_sectors (which
caused dm_merge_bvec()'s max_hw_sectors check to be ineffective).
Signed-off-by: NMike Snitzer <snitzer@redhat.com>
Cc: stable@kernel.org
Acked-by: NMartin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: NJens Axboe <jaxboe@fusionio.com>

When stacking devices, a request_queue is not always available. This
forced us to have a no_cluster flag in the queue_limits that could be
used as a carrier until the request_queue had been set up for a
metadevice.

There were several problems with that approach. First of all it was up
to the stacking device to remember to set queue flag after stacking had
completed. Also, the queue flag and the queue limits had to be kept in
sync at all times. We got that wrong, which could lead to us issuing
commands that went beyond the max scatterlist limit set by the driver.

The proper fix is to avoid having two flags for tracking the same thing.
We deprecate QUEUE_FLAG_CLUSTER and use the queue limit directly in the
block layer merging functions. The queue_limit 'no_cluster' is turned
into 'cluster' to avoid double negatives and to ease stacking.
Clustering defaults to being enabled as before. The queue flag logic is
removed from the stacking function, and explicitly setting the cluster
flag is no longer necessary in DM and MD.
Reported-by: NEd Lin <ed.lin@promise.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
Acked-by: NMike Snitzer <snitzer@redhat.com>
Cc: stable@kernel.org
Signed-off-by: NJens Axboe <jaxboe@fusionio.com>

Currently, media presence polling for removeable block devices is done
from userland.  There are several issues with this.

* Polling is done by periodically opening the device.  For SCSI
  devices, the command sequence generated by such action involves a
  few different commands including TEST_UNIT_READY.  This behavior,
  while perfectly legal, is different from Windows which only issues
  single command, GET_EVENT_STATUS_NOTIFICATION.  Unfortunately, some
  ATAPI devices lock up after being periodically queried such command
  sequences.

* There is no reliable and unintrusive way for a userland program to
  tell whether the target device is safe for media presence polling.
  For example, polling for media presence during an on-going burning
  session can make it fail.  The polling program can avoid this by
  opening the device with O_EXCL but then it risks making a valid
  exclusive user of the device fail w/ -EBUSY.

* Userland polling is unnecessarily heavy and in-kernel implementation
  is lighter and better coordinated (workqueue, timer slack).

This patch implements framework for in-kernel disk event handling,
which includes media presence polling.

* bdops->check_events() is added, which supercedes ->media_changed().
  It should check whether there's any pending event and return if so.
  Currently, two events are defined - DISK_EVENT_MEDIA_CHANGE and
  DISK_EVENT_EJECT_REQUEST.  ->check_events() is guaranteed not to be
  called parallelly.

* gendisk->events and ->async_events are added.  These should be
  initialized by block driver before passing the device to add_disk().
  The former contains the mask of all supported events and the latter
  the mask of all events which the device can report without polling.
  /sys/block/*/events[_async] export these to userland.

* Kernel parameter block.events_dfl_poll_msecs controls the system
  polling interval (default is 0 which means disable) and
  /sys/block/*/events_poll_msecs control polling intervals for
  individual devices (default is -1 meaning use system setting).  Note
  that if a device can report all supported events asynchronously and
  its polling interval isn't explicitly set, the device won't be
  polled regardless of the system polling interval.

* If a device is opened exclusively with write access, event checking
  is automatically disabled until all write exclusive accesses are
  released.

* There are event 'clearing' events.  For example, both of currently
  defined events are cleared after the device has been successfully
  opened.  This information is passed to ->check_events() callback
  using @clearing argument as a hint.

* Event checking is always performed from system_nrt_wq and timer
  slack is set to 25% for polling.

* Nothing changes for drivers which implement ->media_changed() but
  not ->check_events().  Going forward, all drivers will be converted
  to ->check_events() and ->media_change() will be dropped.
Signed-off-by: NTejun Heo <tj@kernel.org>
Cc: Kay Sievers <kay.sievers@vrfy.org>
Cc: Jan Kara <jack@suse.cz>
Signed-off-by: NJens Axboe <jaxboe@fusionio.com>

There's no reason for register_disk() and del_gendisk() to be in
fs/partitions/check.c.  Move both to genhd.c.  While at it, collapse
unlink_gendisk(), which was artificially in a separate function due to
genhd.c / check.c split, into del_gendisk().
Signed-off-by: NTejun Heo <tj@kernel.org>
Signed-off-by: NJens Axboe <jaxboe@fusionio.com>

There's no user of the facility.  Kill it.
Signed-off-by: NTejun Heo <tj@kernel.org>
Signed-off-by: NJens Axboe <jaxboe@fusionio.com>

If priority is changed, continuing to check workload_expires and service tree
count of the previous workload does not make sense. We should always choose
the workload with lowest key of new priority in such case.
Signed-off-by: NShaohua Li <shaohua.li@intel.com>
Reviewed-by: NJeff Moyer <jmoyer@redhat.com>
Signed-off-by: NJens Axboe <jaxboe@fusionio.com>

This patch corrects an issue in bsg that results in a general protection
fault if an LLD is removed while an application is using an open file
handle to a bsg device, and the application issues an ioctl. The fault
occurs because the class_dev is NULL, having been cleared in
bsg_unregister_queue() when the driver was removed.  With this
patch, a check is made for the class_dev, and the application
will receive ENXIO if the related object is gone.
Signed-off-by: NCarl Lajeunesse <carl.lajeunesse@emulex.com>
Signed-off-by: NJames Smart <james.smart@emulex.com>
Signed-off-by: NJames Bottomley <James.Bottomley@suse.de>

o I was discussing what are the variable being updated without spin lock and
  why do we need barriers and Oleg pointed out that location of smp_rmb()
  should be between read of td->limits_changed and tg->limits_changed. This
  patch fixes it.

o Following is one possible sequence of events. Say cpu0 is executing
  throtl_update_blkio_group_read_bps() and cpu1 is executing
  throtl_process_limit_change().

 cpu0                                                cpu1

 tg->limits_changed = true;
 smp_mb__before_atomic_inc();
 atomic_inc(&td->limits_changed);

                                     if (!atomic_read(&td->limits_changed))
                                             return;

                                     if (tg->limits_changed)
                                             do_something;

 If cpu0 has updated tg->limits_changed and td->limits_changed, we want to
 make sure that if update to td->limits_changed is visible on cpu1, then
 update to tg->limits_changed should also be visible.

 Oleg pointed out to ensure that we need to insert an smp_rmb() between
 td->limits_changed read and tg->limits_changed read.

o I had erroneously put smp_rmb() before atomic_read(&td->limits_changed).
  This patch fixes it.
Reported-by: NOleg Nesterov <oleg@redhat.com>
Signed-off-by: NVivek Goyal <vgoyal@redhat.com>
Signed-off-by: NJens Axboe <jaxboe@fusionio.com>

o During some testing I did following and noticed throttling stops working.

        - Put a very low limit on a cgroup, say 1 byte per second.
        - Start some reads, this will set slice_end to a very high value.
        - Change the limit to higher value say 1MB/s
        - Now IO unthrottles and finishes as expected.
        - Try to do the read again but IO is not limited to 1MB/s as expected.

o What is happening.
        - Initially low value of limit sets slice_end to a very high value.
        - During updation of limit, slice_end is not being truncated.
        - Very high value of slice_end leads to keeping the existing slice
          valid for a very long time and new slice does not start.
        - tg_may_dispatch() is called in blk_throtle_bio(), and trim_slice()
          is not called in this path. So slice_start is some old value and
          practically we are able to do huge amount of IO.

o There are many ways it can be fixed. I have fixed it by trying to
  adjust/cleanup slice_end in trim_slice(). Generally we extend slices if bio
  is big and can't be dispatched in one slice. After dispatch of bio, readjust
  the slice_end to make sure we don't end up with huge values.
Signed-off-by: NVivek Goyal <vgoyal@redhat.com>
Signed-off-by: NJens Axboe <jaxboe@fusionio.com>

It's able to check whether a CFQ group on a service tree by
checking "cfqg->rb_node". There's no need to maintain an
extra flag here.
Signed-off-by: NGui Jianfeng <guijianfeng@cn.fujitsu.com>
Acked-by: NVivek Goyal <vgoyal@redhat.com>
Signed-off-by: NJens Axboe <jaxboe@fusionio.com>

When a cfq group is running, it won't be dequeued from service tree, so
there's no need to store the active one in st->active. Just gid rid of it.
Signed-off-by: NGui Jianfeng <guijianfeng@cn.fujitsu.com>
Acked-by: NVivek Goyal <vgoyal@redhat.com>
Signed-off-by: NJens Axboe <jaxboe@fusionio.com>

commit 9284bcf4 checks for proper length of iov entries in
blk_rq_map_user_iov(). But if the map is unaligned, kernel
will break out the loop without checking for the proper length.
So we need to check the proper length before the unalign check.
Signed-off-by: NXiaotian Feng <dfeng@redhat.com>
Cc: stable@kernel.org
Signed-off-by: NJens Axboe <jaxboe@fusionio.com>

The big kernel lock has been removed from all these files at some point,
leaving only the #include.

Remove this too as a cleanup.
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Signed-off-by: NKiyoshi Ueda <k-ueda@ct.jp.nec.com>
Signed-off-by: NJun'ichi Nomura <j-nomura@ce.jp.nec.com>
Signed-off-by: NMike Snitzer <snitzer@redhat.com>
Signed-off-by: NJens Axboe <jaxboe@fusionio.com>

o Allow hierarchical cgroup creation for blkio controller

o Currently we disallow it as both the io controller policies (throttling
  as well as proportion bandwidth) do not support hierarhical accounting
  and control. But the flip side is that blkio controller can not be used with
  libvirt as libvirt creates a cgroup hierarchy deeper than 1 level.

  <top-level-cgroup-dir>/<controller>/libvirt/qemu/<virtual-machine-groups>

o So this patch will allow creation of cgroup hierarhcy but at the backend
  everything will be treated as flat. So if somebody created a an hierarchy
  like as follows.

			root
			/  \
		     test1 test2
			|
		     test3

  CFQ and throttling will practically treat all groups at same level.

				pivot
			     /  |   \  \
			root  test1 test2  test3

o Once we have actual support for hierarchical accounting and control
  then we can introduce another cgroup tunable file "blkio.use_hierarchy"
  which will be 0 by default but if user wants to enforce hierarhical
  control then it can be set to 1. This way there should not be any
  ABI problems down the line.

o The only not so pretty part is introduction of extra file "use_hierarchy"
  down the line. Kame-san had mentioned that hierarhical accounting is
  expensive in memory controller hence they keep it off by default. I
  suspect same will be the case for IO controller also as for each IO
  completion we shall have to account IO through hierarchy up to the root.
  if yes, then it probably is not a very bad idea to introduce this extra
  file so that it will be used only when somebody needs it and some people
  might enable hierarchy only in part of the hierarchy.

o This is how basically memory controller also uses "use_hierarhcy" and
  they also allowed creation of hierarchies when actual backend support
  was not available.
Signed-off-by: NVivek Goyal <vgoyal@redhat.com>
Acked-by: NBalbir Singh <balbir@linux.vnet.ibm.com>
Reviewed-by: NGui Jianfeng <guijianfeng@cn.fujitsu.com>
Reviewed-by: NCiju Rajan K <ciju@linux.vnet.ibm.com>
Tested-by: NCiju Rajan K <ciju@linux.vnet.ibm.com>
Signed-off-by: NJens Axboe <jaxboe@fusionio.com>

o Currently we try to dispatch more READS and less WRITES (75%, 25%) in one
  dispatch round. ummy pointed out that there is a bug in max_nr_writes
  calculation. This patch fixes it.
Reported-by: Nummy y <yummylln@yahoo.com.cn>
Signed-off-by: NVivek Goyal <vgoyal@redhat.com>
Signed-off-by: NJens Axboe <jaxboe@fusionio.com>

Over time, block layer has accumulated a set of APIs dealing with bdev
open, close, claim and release.

* blkdev_get/put() are the primary open and close functions.

* bd_claim/release() deal with exclusive open.

* open/close_bdev_exclusive() are combination of open and claim and
  the other way around, respectively.

* bd_link/unlink_disk_holder() to create and remove holder/slave
  symlinks.

* open_by_devnum() wraps bdget() + blkdev_get().

The interface is a bit confusing and the decoupling of open and claim
makes it impossible to properly guarantee exclusive access as
in-kernel open + claim sequence can disturb the existing exclusive
open even before the block layer knows the current open if for another
exclusive access.  Reorganize the interface such that,

* blkdev_get() is extended to include exclusive access management.
  @holder argument is added and, if is @FMODE_EXCL specified, it will
  gain exclusive access atomically w.r.t. other exclusive accesses.

* blkdev_put() is similarly extended.  It now takes @mode argument and
  if @FMODE_EXCL is set, it releases an exclusive access.  Also, when
  the last exclusive claim is released, the holder/slave symlinks are
  removed automatically.

* bd_claim/release() and close_bdev_exclusive() are no longer
  necessary and either made static or removed.

* bd_link_disk_holder() remains the same but bd_unlink_disk_holder()
  is no longer necessary and removed.

* open_bdev_exclusive() becomes a simple wrapper around lookup_bdev()
  and blkdev_get().  It also has an unexpected extra bdev_read_only()
  test which probably should be moved into blkdev_get().

* open_by_devnum() is modified to take @holder argument and pass it to
  blkdev_get().

Most of bdev open/close operations are unified into blkdev_get/put()
and most exclusive accesses are tested atomically at the open time (as
it should).  This cleans up code and removes some, both valid and
invalid, but unnecessary all the same, corner cases.

open_bdev_exclusive() and open_by_devnum() can use further cleanup -
rename to blkdev_get_by_path() and blkdev_get_by_devt() and drop
special features.  Well, let's leave them for another day.

Most conversions are straight-forward.  drbd conversion is a bit more
involved as there was some reordering, but the logic should stay the
same.
Signed-off-by: NTejun Heo <tj@kernel.org>
Acked-by: NNeil Brown <neilb@suse.de>
Acked-by: NRyusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Acked-by: NMike Snitzer <snitzer@redhat.com>
Acked-by: NPhilipp Reisner <philipp.reisner@linbit.com>
Cc: Peter Osterlund <petero2@telia.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andreas Dilger <adilger.kernel@dilger.ca>
Cc: "Theodore Ts'o" <tytso@mit.edu>
Cc: Mark Fasheh <mfasheh@suse.com>
Cc: Joel Becker <joel.becker@oracle.com>
Cc: Alex Elder <aelder@sgi.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: dm-devel@redhat.com
Cc: drbd-dev@lists.linbit.com
Cc: Leo Chen <leochen@broadcom.com>
Cc: Scott Branden <sbranden@broadcom.com>
Cc: Chris Mason <chris.mason@oracle.com>
Cc: Steven Whitehouse <swhiteho@redhat.com>
Cc: Dave Kleikamp <shaggy@linux.vnet.ibm.com>
Cc: Joern Engel <joern@logfs.org>
Cc: reiserfs-devel@vger.kernel.org
Cc: Alexander Viro <viro@zeniv.linux.org.uk>

Reported-by: NOleg Nesterov <oleg@redhat.com>
Signed-off-by: NJens Axboe <jaxboe@fusionio.com>

REQ_HARDBARRIER is dead now, so remove the leftovers.  What's left
at this point is:

 - various checks inside the block layer.
 - sanity checks in bio based drivers.
 - now unused bio_empty_barrier helper.
 - Xen blockfront use of BLKIF_OP_WRITE_BARRIER - it's dead for a while,
   but Xen really needs to sort out it's barrier situaton.
 - setting of ordered tags in uas - dead code copied from old scsi
   drivers.
 - scsi different retry for barriers - it's dead and should have been
   removed when flushes were converted to FS requests.
 - blktrace handling of barriers - removed.  Someone who knows blktrace
   better should add support for REQ_FLUSH and REQ_FUA, though.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NJens Axboe <jaxboe@fusionio.com>

Structure hd_geometry is copied to userland with 4 padding bytes
between cylinders and start fields uninitialized on 64-bit platforms.
It leads to leaking of contents of kernel stack memory.

Currently there is no memset() in real implementations of getgeo()
in drivers/block/, so it makes sense to have memset() in blkdev_ioctl().
Signed-off-by: NVasiliy Kulikov <segooon@gmail.com>
Signed-off-by: NJens Axboe <jaxboe@fusionio.com>

Convert direct reads of an inode's i_size to using i_size_read().

i_size_{read,write} use a seqcount to protect reads from accessing
incomple writes.  Concurrent i_size_write()s require mutual exclussion
to protect the seqcount that is used by i_size_{read,write}.  But
i_size_read() callers do not need to use additional locking.
Signed-off-by: NMike Snitzer <snitzer@redhat.com>
Acked-by: NNeilBrown <neilb@suse.de>
Acked-by: NLars Ellenberg <lars.ellenberg@linbit.com>
Signed-off-by: NJens Axboe <jaxboe@fusionio.com>

Reported-by: NDan Rosenberg <drosenberg@vsecurity.com>
Cc: stable@kernel.org
Signed-off-by: NJens Axboe <jaxboe@fusionio.com>

Ensure that we pass down properly validated iov segments before
calling into the mapping or copy functions.
Reported-by: NDan Rosenberg <drosenberg@vsecurity.com>
Cc: stable@kernel.org
Signed-off-by: NJens Axboe <jaxboe@fusionio.com>

Vivek suggests we don't need schedule a dispatch when an idle queue
becomes nonidle. And he is right, cfq_should_preempt already covers
the logic.
Signed-off-by: NShaohua Li <shaohua.li@intel.com>
Signed-off-by: NJens Axboe <jaxboe@fusionio.com>

If a deep seek queue slowly deliver requests but disk is much faster, idle
for the queue just wastes disk throughput. If the queue delevers all requests
before half its slice is used, the patch disable idle for it.
In my test, application delivers 32 requests one time, the disk can accept
128 requests at maxium and disk is fast. without the patch, the throughput
is just around 30m/s, while with it, the speed is about 80m/s. The disk is
a SSD, but is detected as a rotational disk. I can configure it as SSD, but
I thought the deep seek queue logic should be fixed too, for example,
considering a fast raid.
Signed-off-by: NShaohua Li <shaohua.li@intel.com>
Signed-off-by: NJens Axboe <jaxboe@fusionio.com>

A queue is idle at cfq_dispatch_requests(), but it gets noidle later. Unless
other task explictly does unplug or all requests are drained, we will not
deliever requests to the disk even cfq_arm_slice_timer doesn't make the
queue idle. For example, cfq_should_idle() returns true because of
service_tree->count == 1, and then other queues are added. Note, I didn't
see obvious performance impacts so far with the patch, but just thought
this could be a problem.
Signed-off-by: NShaohua Li <shaohua.li@intel.com>
Signed-off-by: NJens Axboe <jaxboe@fusionio.com>

Some functions should return boolean.
Signed-off-by: NShaohua Li <shaohua.li@intel.com>
Signed-off-by: NJens Axboe <jaxboe@fusionio.com>

"gadget", "through", "command", "maintain", "maintain", "controller", "address",
"between", "initiali[zs]e", "instead", "function", "select", "already",
"equal", "access", "management", "hierarchy", "registration", "interest",
"relative", "memory", "offset", "already",
Signed-off-by: NUwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

This reverts commit 7681bfee.

Conflicts:

	include/linux/genhd.h

It has numerous issues with the cleanup path and non-elevator
devices. Revert it for now so we can come up with a clean
version without rushing things.
Signed-off-by: NJens Axboe <jaxboe@fusionio.com>