Use setup_timer and mod_timer API instead of structure assignments.

This is done using Coccinelle and semantic patch used
for this as follows:

@@
expression x,y,z,a,b;
@@

-init_timer (&x);
+setup_timer (&x, y, z);
+mod_timer (&a, b);
-x.function = y;
-x.data = z;
-x.expires = b;
-add_timer(&a);
Signed-off-by: NHimanshu Jha <himanshujha199640@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

A SYN packet which arrives with errors from FW should be dropped.
This required adding an additional field to the ll2
rx completion data.
Signed-off-by: NMichal Kalderon <Michal.Kalderon@cavium.com>
Signed-off-by: NAriel Elior <Ariel.Elior@cavium.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The maximum number of CQs supported is bound to the number
of connections supported, which differs between RoCE and iWARP.

This fixes a crash that occurred in iWARP when running 1000 sessions
using perftest.

Fixes: 67b40dcc ("qed: Implement iWARP initialization, teardown and qp operations")
Signed-off-by: NMichal Kalderon <Michal.Kalderon@cavium.com>
Signed-off-by: NAriel Elior <Ariel.Elior@cavium.com>
Reviewed-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

iWARP requires OOO support which is already provided by the ll2
interface (until now was used only for iSCSI offload).
The changes mostly include opening a ll2 dedicated connection for
OOO and notifiying the FW about the handle id.
Signed-off-by: NMichal Kalderon <Michal.Kalderon@cavium.com>
Signed-off-by: NAriel Elior <Ariel.Elior@cavium.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch is the last of the initial iWARP patch series. It
adds the possiblity to actually detect iWARP from the device and enable
it in the critical locations which basically make iWARP available.

It wasn't submitted until now as iWARP hadn't been accepted into
the rdma tree.
Signed-off-by: NMichal Kalderon <Michal.Kalderon@cavium.com>
Signed-off-by: NAriel Elior <Ariel.Elior@cavium.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

IS_ERR() already implies unlikely(), so it can be omitted.
Signed-off-by: NTobias Klauser <tklauser@distanz.ch>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

IS_ERR() already implies unlikely(), so it can be omitted.
Signed-off-by: NTobias Klauser <tklauser@distanz.ch>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

IS_ERR() already implies unlikely(), so it can be omitted.
Signed-off-by: NTobias Klauser <tklauser@distanz.ch>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

IS_ERR() already implies unlikely(), so it can be omitted.
Signed-off-by: NTobias Klauser <tklauser@distanz.ch>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Key length can't be negative.

Leave comparisons against nla_len() signed just in case truncated attribute
can sneak in there.

Space savings:

	add/remove: 0/0 grow/shrink: 0/7 up/down: 0/-7 (-7)
	function                                     old     new   delta
	pneigh_delete                                273     272      -1
	mlx5e_rep_netevent_event                    1415    1414      -1
	mlx5e_create_encap_header_ipv6              1194    1193      -1
	mlx5e_create_encap_header_ipv4              1071    1070      -1
	cxgb4_l2t_get                               1104    1103      -1
	__pneigh_lookup                               69      68      -1
	__neigh_create                              2452    2451      -1
Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

it seems no need to keep tun_get() and __tun_get() at same time.
Signed-off-by: Nyuan linyu <Linyu.Yuan@alcatel-sbell.com.cn>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

reset the driver's DCB state in couple of places
where it was missing.
Signed-off-by: NCasey Leedom <leedom@chelsio.com>
Signed-off-by: NGanesh Goudar <ganeshgr@chelsio.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NRick Farrington <ricardo.farrington@cavium.com>
Signed-off-by: NFelix Manlunas <felix.manlunas@cavium.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NRick Farrington <ricardo.farrington@cavium.com>
Signed-off-by: NFelix Manlunas <felix.manlunas@cavium.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NRick Farrington <ricardo.farrington@cavium.com>
Signed-off-by: NFelix Manlunas <felix.manlunas@cavium.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

For older hosts without multi-channel (vRSS) support, and some error
cases, we still need to set the real number of queues to one.
This patch adds this missing setting.

Fixes: 8195b139 ("hv_netvsc: fix deadlock on hotplug")
Signed-off-by: NHaiyang Zhang <haiyangz@microsoft.com>
Reviewed-by: NStephen Hemminger <sthemmin@microsoft.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Add a TUN/TAP receive mode that exercises the napi_gro_frags()
interface. This mode is available only in TAP mode, as the interface
expects packets with Ethernet headers.

Furthermore, packets follow the layout of the iovec_iter that was
received. The first iovec is the linear data, and every one after the
first is a fragment. If there are more fragments than the max number,
drop the packet. Additionally, invoke eth_get_headlen() to exercise flow
dissector code and to verify that the header resides in the linear data.

The napi_gro_frags() mode requires setting the IFF_NAPI_FRAGS option.
This is imposed because this mode is intended for testing via tools like
syzkaller and packetdrill, and the increased flexibility it provides can
introduce security vulnerabilities. This flag is accepted only if the
device is in TAP mode and has the IFF_NAPI flag set as well. This is
done because both of these are explicit requirements for correct
operation in this mode.
Signed-off-by: NPetar Penkov <peterpenkov96@gmail.com>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Mahesh Bandewar <maheshb@google.com>
Cc: Willem de Bruijn <willemb@google.com>
Cc: davem@davemloft.net
Cc: ppenkov@stanford.edu
Acked-by: NMahesh Bandewar <maheshb@google,com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Changes TUN driver to use napi_gro_receive() upon receiving packets
rather than netif_rx_ni(). Adds flag IFF_NAPI that enables these
changes and operation is not affected if the flag is disabled.  SKBs
are constructed upon packet arrival and are queued to be processed
later.

The new path was evaluated with a benchmark with the following setup:
Open two tap devices and a receiver thread that reads in a loop for
each device. Start one sender thread and pin all threads to different
CPUs. Send 1M minimum UDP packets to each device and measure sending
time for each of the sending methods:
	napi_gro_receive():	4.90s
	netif_rx_ni():		4.90s
	netif_receive_skb():	7.20s
Signed-off-by: NPetar Penkov <peterpenkov96@gmail.com>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Mahesh Bandewar <maheshb@google.com>
Cc: Willem de Bruijn <willemb@google.com>
Cc: davem@davemloft.net
Cc: ppenkov@stanford.edu
Acked-by: NMahesh Bandewar <maheshb@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

These two drivers (dummy and ifb) call ether_setup(), after commit
61e84623 ("net: centralize net_device min/max MTU checking"), the
range of mtu is [min_mtu, max_mtu], which is [68, 1500] by default.

These two devices should not have limits on MTU. This patch set their
min_mtu/max_mtu to 0. So that dev_set_mtu() will not check the mtu range,
and can be set with any value.

CC: Eric Dumazet <edumazet@google.com>
CC: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: NZhang Shengju <zhangshengju@cmss.chinamobile.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Don't populate const array ver_list on the stack, instead make it
static. Makes the object code smaller by over 400 bytes:

Before:
   text	   data	    bss	    dec	    hex	filename
  18444	   3168	    320	  21932	   55ac	drivers/net/hyperv/netvsc.o

After:
   text	   data	    bss	    dec	    hex	filename
  17950	   3224	    320	  21494	   53f6	drivers/net/hyperv/netvsc.o

(gcc 6.3.0, x86-64)
Signed-off-by: NColin Ian King <colin.king@canonical.com>
Reviewed-by: NHaiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

In the xmit/rx fastpath, the function dma_map_single rarely fails.
Therefore, add an unlikely() optimization to this error check
conditional.
Signed-off-by: NZhu Yanjun <yanjun.zhu@oracle.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Add support to retrieve stats from hardware for offloaded tc flower
flows.  Also, poll for the stats of offloaded flows via timer callback.
Signed-off-by: NKumar Sanghvi <kumaras@chelsio.com>
Signed-off-by: NRahul Lakkireddy <rahul.lakkireddy@chelsio.com>
Signed-off-by: NGanesh Goudar <ganeshgr@chelsio.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Add support for offloading tc-flower flows having
vlan actions: pop, push and modify.
Signed-off-by: NKumar Sanghvi <kumaras@chelsio.com>
Signed-off-by: NRahul Lakkireddy <rahul.lakkireddy@chelsio.com>
Signed-off-by: NGanesh Goudar <ganeshgr@chelsio.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Add support to add/remove flows for offload.  Following match
and action are supported for offloading a flow:

Match: ether-protocol, IPv4/IPv6 addresses, L4 ports (TCP/UDP)
Action: drop, redirect to another port on the device.

The qualifying flows can have accompanying mask information.
Signed-off-by: NKumar Sanghvi <kumaras@chelsio.com>
Signed-off-by: NRahul Lakkireddy <rahul.lakkireddy@chelsio.com>
Signed-off-by: NGanesh Goudar <ganeshgr@chelsio.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Add basic skeleton to prepare for offloading tc-flower flows.
Signed-off-by: NKumar Sanghvi <kumaras@chelsio.com>
Signed-off-by: NRahul Lakkireddy <rahul.lakkireddy@chelsio.com>
Signed-off-by: NGanesh Goudar <ganeshgr@chelsio.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

There is no one which would invokes the function skb_header_release.
So just remove it now.
Signed-off-by: NGao Feng <gfree.wind@vip.163.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

We should set xdp_xmit only when xdp_do_redirect() succeed.

Cc: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: NJason Wang <jasowang@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

FW needs the 0th GID Entry in the Table to be preserved before
it's corresponding QP1 is deleted, else it will fail the cmd.
Check for the same and return to prevent error msg being logged for
cmd failure.
Signed-off-by: NSomnath Kotur <somnath.kotur@broadcom.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

This patch fixes a memory leak issue when alloc_mr is used.
mr->pages and mr->npages are used only in alloc_mr path. mr->pages
is allocated when alloc_mr is called or in the case of FRMR, while
creating the MR. mr->npages is updated only when the MR created
is used i.e. after invoking map_mr_sg verb, before data transfer.
In the dereg_mr path, if mr->npages is 0, driver ends up not freeing
the memory created.
Removing the npages check from the dereg_mr path for kernel consumers.
Signed-off-by: NSelvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: NSomnath Kotur <somnath.kotur@broadcom.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

When there is a NETDEV_UNREGISTER event, bnxt_re driver calls
ib_unregister_device() (RTNL lock held).
ib_unregister_device attempts to flush a worker queue scheduled by
ib_core and that queue might have a pending ib_query_port().
ib_query_port in turn calls bnxt_re_query_port(), which while querying the
link speed using ib_get_eth_speed(), tries to acquire the rtnl_lock() which
was already held by NETDEV_UNREGISTER.
Fixing the issue by removing the link speed query from bnxt_re_query_port()
Now the speed is queried post a successful ib_register_device or whenever
there is a NETDEV_CHANGE event.
Signed-off-by: NSomnath Kotur <somnath.kotur@broadcom.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Upon receipt of the NETDEV_REGISTER event from the netdev notifier chain,
the IB stack registration is spawned off to a workqueue since that also
requires an rtnl lock.
There could be 2 kinds of races between the NETDEV_REGISTER and the
NETDEV_UNREGISTER event handling.
a)The NETDEV_UNREGISTER event is received in rapid succession after
the NETDEV_REGISTER event even before the work queue got a chance to run.
b)The NETDEV_UNREGISTER event is received while the workqueue that handles
registration with the IB stack is still in progress.

Handle both the races with a bit flag that is set just before the work item
is queued and cleared in the workqueue after the event is handled just
before the workqueue item is freed.

While adding the new flag, it was noted that the flags are all used in
*_bit() operations which expect a bit number and not a literal constant
with a bit set.  So change the numbers to be bit numbers.
Signed-off-by: NSomnath Kotur <somnath.kotur@broadcom.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Clean up all devices added to the bnxt_re_dev_list in the
module_exit entry point.
Signed-off-by: NSomnath Kotur <somnath.kotur@broadcom.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Driver must assign the user supplied compare/swap values in
the wqe to successfully complete the atomic compare and
swap operation.
Signed-off-by: NDevesh Sharma <devesh.sharma@broadcom.com>
Signed-off-by: NSomnath Kotur <somnath.kotur@broadcom.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Once a cmd to FW times out(after 20s) it is reasonable to
assume the FW or atleast the control path is dead.
No point issuing further cmds to the FW as each subsequent cmd
with another 20s timeout will cascade resulting in unnecessary
traces and/or NMI Lockups.
Signed-off-by: NSomnath Kotur <somnath.kotur@broadcom.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

The MTU value in the qplib_qp.mtu should be
consistent with whatever mtu was set during
INIT to RTR.The Next PSN and number of packets
are calculated based on this member in the qplib_qp structure.
Signed-off-by: NNarender Reddy <narender.reddy@broadcom.com>
Signed-off-by: NDevesh Sharma <devesh.sharma@broadcom.com>
Signed-off-by: NSomnath Kotur <somnath.kotur@broadcom.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

During OpenMPI scale up testing, we observe rdma_connect
failures if ports are reused on multiple connections.
This is because the Control Queue-Pair (CQP) command to add
the reused port to Accelerated Port Bit VectorTable (APBVT)
fails as there already exists an entry.

Check for duplicate port before invoking the CQP command
to add APBVT entry and delete the entry only if the port
is not in use.
Signed-off-by: NShiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Set the VLAN priority which is in the upper 3 bits of the VLAN
tag field in the QP context.
Signed-off-by: NMustafa Ismail <mustafa.ismail@intel.com>
Signed-off-by: NShiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

If QP modify to closing/terminate/error fails, connection is
not torn down as there is no corresponding asynchronous
event that will initiate the teardown.

Add explicit call to i40iw_cm_disconn if not waiting in
modify QP, otherwise schedule it in CM timer.
Signed-off-by: NShiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Netdev event notifier registration/de-registration is not
synchronized with a lock and there is a possibility of a
duplicate registration of notifier before the unregister
completes.

Register netdev event notifiers during module init and
de-register them at module exit.

This avoids the need to tie the registration to first netdev
client interface open and de-registration to last client
interface close and the synchronization to achieve it.

This also fixes a crash due to duplicate registration.

BUG: unable to handle kernel paging request at ffffffffa0d60388
IP: [<ffffffff8160f75d>] notifier_call_chain+0x3d/0x70
PGD 190d067 PUD 190e063 PMD 76c840067 PTE 0
Oops: 0000 [#1] SMP
Modules linked in: i40e(OF-) fuse btrfs zlib_deflate raid6_pq xor vfat msdos
[..]
e1000e vxlan ip_tunnel ptp pps_core i2c_core video [last unloaded: i40iw]
CPU: 1 PID: 27101 Comm: modprobe Tainted: GF       W  O--------------   3.10.0-229.el7.x86_64 #1
Hardware name: Gigabyte Technology Co., Ltd. To be filled by O.E.M./Q87M-D2H, BIOS F7 01/17/2014
task: ffff88076e8a96c0 ti: ffff8806959c8000 task.ti: ffff8806959c8000
RIP: 0010:[<ffffffff8160f75d>]  [<ffffffff8160f75d>] notifier_call_chain+0x3d/0x70
RSP: 0018:ffff8806959cbb38  EFLAGS: 00010282
RAX: ffffffffa0d60380 RBX: 00000000fffffffd RCX: 0000000000000000
0708] RDX: 0000000000000000 RSI: ffff88081227a000 RDI: 0000000000000002
RBP: ffff8806959cbb60 R08: 0000000000000246 R09: 000000000000700c
R10: ffff88080e16ea40 R11: 00000000000ae8df R12: ffffffffa0d60380
R13: 0000000000000002 R14: ffff88076e738800 R15: 0000000000000000
FS:  00007f604ef4a740(0000) GS:ffff88083e240000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: ffffffffa0d60388 CR3: 0000000753cd2000 CR4: 00000000001407e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
Stack:
ffffffff819e73a0 0000000000000000 0000000000000002 ffff88076e738800
00000000ffffffff ffff8806959cbba0 ffffffff8109d61d 0000000000000000
0000000000000000 ffff88076e738800 0000000000000000 ffff88076e738800
Call Trace:
[<ffffffff8109d61d>] __blocking_notifier_call_chain+0x4d/0x70
[<ffffffff8109d656>] blocking_notifier_call_chain+0x16/0x20
[<ffffffff8156b9e4>] __inet_del_ifa+0x154/0x2b0
[<ffffffff8156d102>] inetdev_event+0x182/0x530
[<ffffffff8160f76c>] notifier_call_chain+0x4c/0x70
[<ffffffff8109d446>] raw_notifier_call_chain+0x16/0x20
[<ffffffff814f71fd>] call_netdevice_notifiers+0x2d/0x60
[<ffffffff814f8845>] rollback_registered_many+0x105/0x220
[<ffffffff814f89a0>] rollback_registered+0x40/0x70
[<ffffffff814f9c88>] unregister_netdevice_queue+0x48/0x80
[<ffffffff814f9cdc>] unregister_netdev+0x1c/0x30
[<ffffffffa0067139>] i40e_vsi_release+0x2a9/0x2b0 [i40e]
[<ffffffffa00674e8>] i40e_remove+0x128/0x2b0 [i40e]
[<ffffffff813092db>] pci_device_remove+0x3b/0xb0
[<ffffffff813d26ef>] __device_release_driver+0x7f/0xf0
[<ffffffff813d3068>] driver_detach+0xb8/0xc0
[<ffffffff813d22db>] bus_remove_driver+0x9b/0x120
[<ffffffff813d36dc>] driver_unregister+0x2c/0x50
[<ffffffff81307d4c>] pci_unregister_driver+0x2c/0x90
[<ffffffffa008f9d0>] i40e_exit_module+0x10/0x23 [i40e]
[<ffffffff810dad0b>] SyS_delete_module+0x16b/0x2d0
[<ffffffff81013b0c>] ? do_notify_resume+0x9c/0xb0
[<ffffffff81613da9>] system_call_fastpath+0x16/0x1b
Code: e5 41 57 4d 89 c7 41 56 49 89 d6 41 55 49 89 f5 41 54 53 89 cb
75 14 eb 3d 0f 1f 44 00 00 83 eb 01 74 25 4d 85 e4 74 20 4c 89 e0 <4c>
8b 60 08 4c 89 f2 4c 89 ee 48 89 c7 ff 10 4d 85 ff 74 04 41
RIP  [<ffffffff8160f75d>] notifier_call_chain+0x3d/0x70
Signed-off-by: NShiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Check number of available MSI-X vectors for i40iw.
If there are no available vectors, fail the open.
Signed-off-by: NShiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>