Defined the plane input csc coefficient registers and macros.
6 registers are used to program a total of 9 coefficients,
added macros to define each of them for all the planes
supporting the feature on pipes. On ICL, bottom 3 planes
have this capability.

v2: Segregated the register macro definition as separate patch
as per Maarten's suggestion.

v3: Removed a redundant 3rd Pipe register definition and
simplified the equally spaced register definition by adding an
offset as per Matt's comment.

v4: No Change

v5: Renamed the register Macro as per Matt's suggestion.

v6: No Change

v7: No Change

v8: No Change

v9: No Change
Signed-off-by: NUma Shankar <uma.shankar@intel.com>
Reviewed-by: NMatt Roper <matthew.d.roper@intel.com>
Reviewed-by: NMaarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: NMaarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1541099420-12419-2-git-send-email-uma.shankar@intel.com

The registers DPCSSS,DPSP,DPMLE1 and DPPMS are all at an offset
from the base - which is the FLexi IO Adaptor. Lets follow the
offset calculation while accessing these registers.

v2:
- Follow spec for numbering - s/0/1(Lucas)
- s/FIA_1/FIA1_BASE (Anusha)

v3:
- Remove register offset defines. (Jani)
- Update comment. (Anusha)

v4: rebase. Remove comment.(Lucas)

Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: NAnusha Srivatsa <anusha.srivatsa@intel.com>
Reviewed-by: NLucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: NRodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181101185557.29585-1-anusha.srivatsa@intel.com

Keep the register choosing macros together. No functional changes.
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181031110453.12722-4-jani.nikula@intel.com

Try to make it slightly less of an eye sore. No functional changes.
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181031110453.12722-3-jani.nikula@intel.com

Minor semantic nit, no functional changes.
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181031110453.12722-2-jani.nikula@intel.com

The device info offset arrays for unevenly spaced register offsets is
great for widely used registers. However, the palette registers are only
used in one function, i9xx_load_luts_internal(), and only for GMCH
platforms, wasting device info. Replace palette_offsets with _PICK() in
palette register definition.

While the use of _PICK() does not check for pipe C existence, neither
does the current offset array usage, and leads to bogus address when
pipe C is passed to PALETTE() on non-CHV. Using _PICK() at least leads
to a sensible register offset, just non-existing on non-CHV. Either way,
this shouldn't happen anyway.

Remove unused old palette macros while at it.

Bloat-o-meter results below for completeness.

add/remove: 0/0 grow/shrink: 3/6 up/down: 94/-278 (-184)
Function                                     old     new   delta
i9xx_load_luts_internal                      394     483     +89
i915_driver_load                            5103    5107      +4
g4x_pre_enable_dp                            378     379      +1
intel_engines_init_mmio                     1117    1116      -1
intel_engine_lookup_user                      47      46      -1
hdmi_port_clock_valid                        310     309      -1
gen11_irq_handler                            707     706      -1
intel_device_info_dump_runtime               329     311     -18
intel_device_info_runtime_init              5166    4910    -256
Total: Before=918650, After=918466, chg -0.02%

add/remove: 0/0 grow/shrink: 0/48 up/down: 0/-576 (-576)
Data                                         old     new   delta
intel_valleyview_info                        200     188     -12
intel_skylake_gt4_info                       200     188     -12
intel_skylake_gt3_info                       200     188     -12
intel_skylake_gt2_info                       200     188     -12
intel_skylake_gt1_info                       200     188     -12
intel_sandybridge_m_gt2_info                 200     188     -12
intel_sandybridge_m_gt1_info                 200     188     -12
intel_sandybridge_d_gt2_info                 200     188     -12
intel_sandybridge_d_gt1_info                 200     188     -12
intel_pineview_info                          200     188     -12
intel_kabylake_gt3_info                      200     188     -12
intel_kabylake_gt2_info                      200     188     -12
intel_kabylake_gt1_info                      200     188     -12
intel_ivybridge_q_info                       200     188     -12
intel_ivybridge_m_gt2_info                   200     188     -12
intel_ivybridge_m_gt1_info                   200     188     -12
intel_ivybridge_d_gt2_info                   200     188     -12
intel_ivybridge_d_gt1_info                   200     188     -12
intel_ironlake_m_info                        200     188     -12
intel_ironlake_d_info                        200     188     -12
intel_icelake_11_info                        200     188     -12
intel_i965gm_info                            200     188     -12
intel_i965g_info                             200     188     -12
intel_i945gm_info                            200     188     -12
intel_i945g_info                             200     188     -12
intel_i915gm_info                            200     188     -12
intel_i915g_info                             200     188     -12
intel_i865g_info                             200     188     -12
intel_i85x_info                              200     188     -12
intel_i845g_info                             200     188     -12
intel_i830_info                              200     188     -12
intel_haswell_gt3_info                       200     188     -12
intel_haswell_gt2_info                       200     188     -12
intel_haswell_gt1_info                       200     188     -12
intel_gm45_info                              200     188     -12
intel_geminilake_info                        200     188     -12
intel_g45_info                               200     188     -12
intel_g33_info                               200     188     -12
intel_coffeelake_gt3_info                    200     188     -12
intel_coffeelake_gt2_info                    200     188     -12
intel_coffeelake_gt1_info                    200     188     -12
intel_cherryview_info                        200     188     -12
intel_cannonlake_info                        200     188     -12
intel_broxton_info                           200     188     -12
intel_broadwell_rsvd_info                    200     188     -12
intel_broadwell_gt3_info                     200     188     -12
intel_broadwell_gt2_info                     200     188     -12
intel_broadwell_gt1_info                     200     188     -12
Total: Before=195529, After=194953, chg -0.29%

Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181031110453.12722-1-jani.nikula@intel.com

This patch fixes the naming of the registers:

s/PIPE_DSS_CTL/ICL_PIPE_DSS_CTL

And also fix the hex values to lower case, to match
rest of the definitions.

Manasi noticed this with the patch that was merged.

v2: fix "Fixes" tag.

Fixes: 8b1b558d ("drm/i915/icl: Add DSS_CTL Registers")
Suggested-by: NManasi Navare <manasi.d.navare@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Manasi Navare <manasi.d.navare@intel.com>
Signed-off-by: NAnusha Srivatsa <anusha.srivatsa@intel.com>
Reviewed-by: NManasi Navare <manasi.d.navare@intel.com>
Signed-off-by: NManasi Navare <manasi.d.navare@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181101214216.8958-1-anusha.srivatsa@intel.com

Required for Bindless samplers.
Userspace consumer: mesa

V2: Rebase
V3: Update commit message

Cc: Anusha Srivatsa <anusha.srivatsa@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Signed-off-by: NOscar Mateo <oscar.mateo@intel.com>
Signed-off-by: NRadhakrishna Sripada <radhakrishna.sripada@intel.com>
Reviewed-by: NAnusha Srivatsa <anusha.srivatsa@intel.com>
Signed-off-by: NRodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181030084504.21537-4-radhakrishna.sripada@intel.com

Gen11 Display suports 32 planes in total. Enable the new format in context
status to be used and expanded to 32 planes.

V2: Move the WA to display WA's(Chris)

Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Michel Thierry <michel.thierry@intel.com>
Cc: James Ausmus <james.ausmus@intel.com>
Reviewed-by: NAnusha Srivatsa <anusha.srivatsa@intel.com>
Signed-off-by: NRadhakrishna Sripada <radhakrishna.sripada@intel.com>
Signed-off-by: NRodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181030084504.21537-1-radhakrishna.sripada@intel.com

Add defines for DSS_CTL registers.
These registers specify the big joiner, splitter,
overlap pixels and info regarding
compression enabled on left or right branch.

v2:
- rebase. Remove overlapping defines(James Ausmus)
- Rename the register to ICL_DSS_CTL1/2_PIPE_ (manasi)
- take pixels as an argument for overlap.(Manasi)

v3:
- rebase. merge DSS_CTL1/2 introduced in Madhav's patch
  to avoid confusion (madhav chauhan)
- Rename registers in accordance to BSpec (Madhav, Rodrigo)
- Add define to conditionally check the buffer target depth (James Ausmus)

v4:
- remove redundant definitions.(madhav)

v5:
- Add mask for overlap pixels.
- Code Style changes.(Madhav)
v6:
- Code style changes. (Madhav)
Suggested-by: NMadhav Chauhan <madhav.chauhan@intel.com>
Cc: Madhav Chauhan <madhav.chauhan@intel.com>
cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: James Ausmus <james.ausmus@intel.com>
Cc: Gaurav Singh <gaurav.k.singh@intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Manasi Navare <manasi.d.navare@intel.com>
Signed-off-by: NAnusha Srivatsa <anusha.srivatsa@intel.com>
Reviewed-by: NJani Nikula <jani.nikula@intel.com>
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/07021336cb87d09e8f97fbff709c4e686d7de536.1540900289.git.jani.nikula@intel.com

This patch defines payload/header registers for each DSI
transcoder used for transmitting DSI packets.

v2 by Jani:
 - Drop full register mask and shift for payload
 - Use lower case for hex 0x
Signed-off-by: NMadhav Chauhan <madhav.chauhan@intel.com>
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/18275c49215e512347a14bc38715314c2d6f95a4.1540900289.git.jani.nikula@intel.com

This patch fixes the macros used for defining the DFLEXDPMLE
register bit fields. This accounts for changes in the spec.

Fixes: a2bc69a1 ("drm/i915/icl: Add register definition for DFLEXDPMLE")
Cc: Animesh Manna <animesh.manna@intel.com>
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Cc: Jose Roberto de Souza <jose.souza@intel.com>
Cc: <stable@vger.kernel.org> # v4.19+
Signed-off-by: NManasi Navare <manasi.d.navare@intel.com>
Reviewed-by: NJosé Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181023191248.26418-1-manasi.d.navare@intel.com

Add the newly added slice_row_per_frame parameter
in the Picture Parameter Set registers.
This defines the number of vertically stacked slices
in a frame.

Credits to Manasi for noticing bSpec change.
Suggested-by: NManasi Navare <manasi.d.navare@intel.com>
Cc: Manasi Navare <manasi.d.navare@intel.com>
Signed-off-by: NAnusha Srivatsa <anusha.srivatsa@intel.com>
Reviewed-by: NManasi Navare <manasi.d.navare@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181031001923.31442-1-manasi.d.navare@intel.com

This patch defines DSI_HTX_TO, DSI_LRX_H_TO, DSI_PWAIT_TO
and DSI_TA_TO registers for DSI transcoders '0' and '1'.
They are used for contention recovery on DPHY.

v2: Define SHIFT for bitfields.

v3 by Jani:
- Fix timeout bit definitions
Signed-off-by: NMadhav Chauhan <madhav.chauhan@intel.com>
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/0b943c028a05edfd61c511d712c65c7e8bf70211.1540900289.git.jani.nikula@intel.com

The bits weren't defined in descending order.
v2: Move definitions in a separate patch (Manasi)

Cc: Manasi Navare <manasi.d.navare@intel.com>
Signed-off-by: NDhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Reviewed-by: NManasi Navare <manasi.d.navare@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181005185643.31660-2-dhinakaran.pandiyan@intel.com

The shifts for VSC_SELECT bits are wrong, fix it. Good thing is the
definitions are unused.

v2: Moves definitions in another patch (Manasi)
Cc: Manasi Navare <manasi.d.navare@intel.com>
Cc: Anusha Srivatsa <anusha.srivatsa@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Fixes: 7af2be6d ("drm/i915/icl: Add VIDEO_DIP registers")
Signed-off-by: NDhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Reviewed-by: NManasi Navare <manasi.d.navare@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181005185643.31660-1-dhinakaran.pandiyan@intel.com

Intel HDCP2.2 registers are defined with addr offsets and bit details.

v2:
  Replaced the arith calc with _PICK [Sean Paul]
v3:
  No changes.
v4:
  %s/HDCP2_CTR_DDI/HDCP2_CTL_DDI [Uma]
v5:
  Added parentheses for the parameters of macro.
v6:
  No changes
v7:
  No changes
Signed-off-by: NRamalingam C <ramalingam.c@intel.com>
Reviewed-by: NSean Paul <seanpaul@chromium.org>
Reviewed-by: NUma Shankar <uma.shankar@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/1540806351-7137-7-git-send-email-ramalingam.c@intel.com

The UV plane is the master plane that does all color correction etc.
It needs to be programmed with the dimensions for color plane 1 (UV).

The Y plane just feeds the Y pixels to it. Program the scaler from the
master only, and set PLANE_CTL_YUV420_Y_PLANE on the slave plane.

Changes since v1:
- Make a common skl_program_plane, and use it for both plane updates.
Changes since v2:
- Make color_plane explicit, to clarify skl_update_plane(). (Ville)
Signed-off-by: NMaarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181018115134.9061-8-maarten.lankhorst@linux.intel.com

We configure the chroma upsampler with the same chroma siting as
used by the scaler for consistency, the chroma upsampler is used
instead of the scaler for YUV 4:2:0 on ICL's HDR planes.
Signed-off-by: NMaarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181018115134.9061-7-maarten.lankhorst@linux.intel.com

The first 3 planes (primary, sprite 0 and 1) have a dedicated chroma
upsampler to upscale YUV420 to YUV444 and the scaler should only be
used for upscaling. Because of this we shouldn't program the scalers
in planar mode if NV12 and the chroma upsampler are used. Instead
program the scalers like on normal planes.

Sprite 2 and 3 have no dedicated scaler, and need to program the
selected Y plane in the scaler mode.

Changes since v1:
- Make the comment less confusing.
Changes since v2:
- Fix checkpatch warning (Matt)
- gen10- -> Pre-gen11 (Ville)
- PS_SCALER_MODE_PACKED -> PS_SCALER_MODE_NORMAL. (Matt)
- Add comment about scaler mode in intel_atomic_setup_scaler(). (Matt)
- Rename need_scaling to need_scaler. (Matt)
- Move the crtc need_scaling check to skl_update_scaler_crtc().
Signed-off-by: NMaarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181018115134.9061-6-maarten.lankhorst@linux.intel.com

The way our hardware is designed doesn't seem to let us use the
MI_RECORD_PERF_COUNT command without setting up a circular buffer.

In the case where the user didn't request OA reports to be available
through the i915 perf stream, we can set the OA buffer to the minimum
size to avoid consuming memory which won't be used by the driver.

v2: Simplify oa buffer size exponent selection (Chris)
    Reuse vma size field (Lionel)

v3: Restrict size opening parameter to values supported by HW (Chris)

v4: Drop out of date comment (Matt)
    Add debug message when buffer size is rejected (Matt)
Signed-off-by: NLionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: NMatthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181023100707.31738-5-lionel.g.landwerlin@intel.com

This patch defines DSI_CMD_RXCTL, DSI_CMD_TXCTL registers,
bitfields, masks and macros used for configuring DSI panel.

v2: Define remaining bitfields

v3 by Jani:
 - Alignment fix
Signed-off-by: NMadhav Chauhan <madhav.chauhan@intel.com>
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/37b41fe08ce50c3d9ef7d55c03d12a8a10a252d6.1539613303.git.jani.nikula@intel.com

This patch defines TRANS_CONF registers for DSI ports
0 and 1. Bitfields of these registers used for enabling
and reading the current state of transcoder.

v2: Add blank line before comment

v3 by Jani:
 - Move DSI specific .pipe_offsets to GEN11_FEATURES
 - Macro placement and comment juggling
Signed-off-by: NMadhav Chauhan <madhav.chauhan@intel.com>
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/3aa11e41ea0d4eb434423cc5ddf0a63b19d54deb.1539613303.git.jani.nikula@intel.com

This patch defines registers and bitfields used for
programming DSI transcoder's horizontal and vertical
timings.

v2: Remove TRANS_TIMING_SHIFT definition

v3 by Jani:
 - Group macros by transcoder
Signed-off-by: NMadhav Chauhan <madhav.chauhan@intel.com>
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/dcc329280e3aca5b4fc3482c5bcaa0cac043c5d8.1539613303.git.jani.nikula@intel.com

This patch defines TRANS_DDI_FUNC_CTL and TRANS_DDI_FUNC_CTL2
registers and their bitfields for DSI. These registers are used
for enabling port sync mode, input pipe select, data lane width
configuration etc.

v2: Changes:
    - Remove redundant extra line
    - Correct some of bitfield definition

v3 by Jani:
 - Move DSI transcoder offsets to GEN11_FEATURES
Signed-off-by: NMadhav Chauhan <madhav.chauhan@intel.com>
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/6b2d87db82660320be10e423742cbf5a31e18037.1539613303.git.jani.nikula@intel.com

This patch defines transcoder function configuration
registers and its bitfields for both DSI ports.
Used while programming/enabling DSI transcoder.

v2: Changes (Jani N)
    - Define _SHIFT and _MASK for bitfields
    - Define values for fields already shifted in place

v3 by Jani:
 - Fix _SHIFT fields copy-pasted from _MASK
 - Indentation fixes
 - Reduce S3D orientation to single macro
 - Wrap a macro parameter in parens
Signed-off-by: NMadhav Chauhan <madhav.chauhan@intel.com>
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/f188d3e59f27cbcac87d331af3d0222249db7fe4.1539613303.git.jani.nikula@intel.com

This patch adds _MMIO_DSI macros for accessing DSI
transcoder registers.

v2: Use _MMIO_TRANS() (Ville)

Credits-to: Jani N

Cc: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: NMadhav Chauhan <madhav.chauhan@intel.com>
Reviewed-by: NJani Nikula <jani.nikula@intel.com>
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/3ab94184357d63f2f87b90ef6f5029fb19bef73a.1539613303.git.jani.nikula@intel.com

DDI/TC clock-off bits are not equally distanced. TC1-3 bits are
from offset 12 & TC4 is at offset 21.
Create a function to choose correct clk-off bit.

v2: Add fixes tag (Lucas)

Fixes: c27e917e ("drm/i915/icl: add basic support for the ICL clocks")
Signed-off-by: NMahesh Kumar <mahesh1.kumar@intel.com>
Signed-off-by: NVandita Kulkarni <vandita.kulkarni@intel.com>
Reviewed-by: NLucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: NRodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181016023752.9285-1-lucas.demarchi@intel.com
(cherry picked from commit bb1c7edc)
Signed-off-by: NJoonas Lahtinen <joonas.lahtinen@linux.intel.com>

DDI/TC clock-off bits are not equally distanced. TC1-3 bits are
from offset 12 & TC4 is at offset 21.
Create a function to choose correct clk-off bit.

v2: Add fixes tag (Lucas)

Fixes: c27e917e ("drm/i915/icl: add basic support for the ICL clocks")
Signed-off-by: NMahesh Kumar <mahesh1.kumar@intel.com>
Signed-off-by: NVandita Kulkarni <vandita.kulkarni@intel.com>
Reviewed-by: NLucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: NRodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181016023752.9285-1-lucas.demarchi@intel.com

combo-phy register instances are at same offset from base for each
combo-phy port, i.e.

Port A base offset: 0x16200
Port B base offset: 0x6C000

All the other addresses for both ports can be derived by calculating
offset to these base addresses.

PORT_CL_DW_OFFSET	0x0
PORT_CL_DW<x>		0 + x * 4

PORT_COMP_OFFSET	0x100
PORT_COMP_DW<x>		0x100 + x * 4

PORT_PCS_AUX_OFFSET     0x300
PORT_PCS_GRP_OFFSET     0x600
PORT_PCS_LN<y>_OFFSET   0x800 + y * 0x100

PORT_TX_AUX_OFFSET      0x380
PORT_TX_GRP_OFFSET      0x680
PORT_TX_LN<y>_OFFSET    0x880 + y * 0x100

And inside each PORT_TX_[AUX|GRP|LN] we add `dw * 4`.

Based on original patch by Mahesh Kumar <mahesh1.kumar@intel.com>.

v2: make port, dw and ln arguments follow the order in
    register's name
Signed-off-by: NLucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: NMahesh Kumar <mahesh1.kumar@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: NRodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: NRodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181016023517.8576-1-lucas.demarchi@intel.com

This patch combines CNL/ICL specific port/combophy macros together
at one location. This is prework for patches later in series where
new macros to find port/combophy register will be introduced.

v2: remove wrong empty line
Signed-off-by: NMahesh Kumar <mahesh1.kumar@intel.com>
Signed-off-by: NLucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: NRodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: NRodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181012234717.8284-1-lucas.demarchi@intel.com

Display WA #1178 is meant to fix Aux channel voltage swing too low with
some type C dongles. It applies to external ports on combo phy. On
Icelake this is port A and B when those are not eDP.

v2: follow the spec to the letter: include Aux A and just check if it's
    not eDP instead of checking only for Aux B.

Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Signed-off-by: NLucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: NRodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: NImre Deak <imre.deak@intel.com>
Signed-off-by: NRodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181012215758.25342-1-lucas.demarchi@intel.com

LSPCON chips can generate YCBCR outputs, if asked nicely :).

In order to generate YCBCR 4:2:0 outputs, a source must:
- send YCBCR 4:4:4 signals to LSPCON
- program color space as 4:2:0 in AVI infoframes

Whereas for YCBCR 4:4:4 outputs, the source must:
- send YCBCR 4:4:4 signals to LSPCON
- program color space as 4:4:4 in AVI infoframes

So for both 4:2:0 as well as 4:4:4 outputs, we are driving the
pipe for YCBCR 4:4:4 output, but AVI infoframe's color space
information indicates LSPCON FW to start scaling down from YCBCR
4:4:4 and generate YCBCR 4:2:0 output. As the scaling is done by
LSPCON device, we need not to reserve a scaler for 4:2:0 outputs.

V2: rebase
V3: Addressed review comments from Ville
    - add enum crtc_output_format instead of bool ycbcr420
    - use crtc_output_format=4:4:4 for modeset of LSPCON 4:2:0 output
      cases in this way we will have YCBCR 4:4:4 framework ready (except
      the ABI part)
V4: Added r-b from Maarten (for v3)
    Addressed review comments from Ville:
    - Do not add a non-atomic state variable to determine lspcon output.
      Instead add bool in CRTC state to indicate lspcon based scaling.
V5: Addressed review comments from Ville:
    - Change the state bool name from external scaling to something more
      relavent.
    - Keep the info and adjusted_mode structures const.
    - use crtc_state instead of pipe_config.
    - Push all the config change into lspcon_ycbcr420_config function.
V6: Rebase, small changes to accommodate changes in patch 2.
V7: Fixed checkpatch warnings for alignment
V8: Rebase

    PS: Ignored following warnings to match the current formatting:
    drm/i915: Add YCBCR 4:2:0/4:4:4 support for LSPCON
     -:53: CHECK:SPACING: spaces preferred around that '<<' (ctx:VxV)
    #53: FILE: drivers/gpu/drm/i915/i915_reg.h:8721:
    +#define  TRANS_MSA_SAMPLING_444        (2<<1)
                                          ^
    -:54: CHECK:SPACING: spaces preferred around that '<<' (ctx:VxV)
    #54: FILE: drivers/gpu/drm/i915/i915_reg.h:8722:
    +#define  TRANS_MSA_CLRSP_YCBCR         (2<<3)
V9: Rebase
V10: Rebase
V11: Rebase

Cc: Ville Syrjala <ville.syrjala@linux.intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: NMaarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: NShashank Sharma <shashank.sharma@intel.com>
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1539325394-20788-8-git-send-email-shashank.sharma@intel.com

Incorrect TDL's SSP address shift in SARB for 16:6 & 18:8 modes.
Disable the Sampler state prefetch functionality in the SARB by
programming 0xB000[30] to '1'. This is to be done at boot time
and the feature must remain disabled permanently.

Fixes flaky tex-mip-level-selection* piglit tests with Mesa i965
driver.

Cc: Radhakrishna Sripada <radhakrishna.sripada@intel.com>
Signed-off-by: NAnuj Phogat <anuj.phogat@gmail.com>
Reviewed-by: NMika Kuoppala <mika.kuoppala@linux.intel.com>
Signed-off-by: NMika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181004182939.7668-6-radhakrishna.sripada@intel.com

Shader feature to prefetch binding tables does not support 16:6 18:8 BTP
formats. Enabling fault handling could result in hangs with faults.
Disabling demand prefetch would disable binding table prefetch.

V2: Fix the stepping rivision to B0(Mika)

References: HSDES#1406609255, HSDES#1406573985
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Signed-off-by: NRadhakrishna Sripada <radhakrishna.sripada@intel.com>
Reviewed-by: NMika Kuoppala <mika.kuoppala@linux.intel.com>
Signed-off-by: NMika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181004182939.7668-5-radhakrishna.sripada@intel.com

ICL spec states that this bit is now reserved.

Bspec: 7722

v2(Dhinakaran and Jani):
- instead of remove bit in gen11 now only setting if if gen < 11
- changed commit title

Cc: Jani Nikula <jani.nikula@linux.intel.com>
Reviewed-by: NDhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Signed-off-by: NJosé Roberto de Souza <jose.souza@intel.com>
Signed-off-by: NDhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181003205031.32474-2-jose.souza@intel.com

Add plane alpha blending support with the different blend modes.
This has been tested on a icl to show the correct results,
on earlier platforms small rounding errors cause issues. But this
already happens case with fully transparant or fully opaque RGB8888
fb's.

The recommended HW workaround is to disable alpha blending when the
plane alpha is 0 (transparant, hide plane) or 0xff (opaque, disable blending).
This is easy to implement on any platform, so just do that.

The tests for userspace are also available, and pass on gen11.

Changes since v1:
- Change mistaken < 0xff0 to 0xff00.
- Only set PLANE_KEYMSK_ALPHA_ENABLE when plane alpha < 0xff00, ignore blend mode.
- Rework disabling FBC when per pixel alpha is used.
Signed-off-by: NMaarten Lankhorst <maarten.lankhorst@linux.intel.com>
[mlankhorst: Change MISSING_CASE default to explicit alpha disable (mattrope)]
Link: https://patchwork.freedesktop.org/patch/msgid/20180815103405.22679-1-maarten.lankhorst@linux.intel.comReviewed-by: NMatt Roper <matthew.d.roper@intel.com>

This patch defines DSI_TA_TIMING_PARAM and
DPHY_TA_TIMING_PARAM registers used in
dphy programming.

v2: Changes (Jani N)
    - Define mask/shift for bitfields
    - Use bitfields name as per BSPEC
    - Define remaining bitfields
Signed-off-by: NMadhav Chauhan <madhav.chauhan@intel.com>
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1537095223-5184-8-git-send-email-madhav.chauhan@intel.com

This patch defines DSI_CLK_TIMING_PARAM, DPHY_CLK_TIMING_PARAM,
DSI_DATA_TIMING_PARAM, DPHY_DATA_TIMING_PARAM register used in
dphy programming.

v2: Define mask/shift for bitfields and keep names as per BSPEC (Jani N)
Signed-off-by: NMadhav Chauhan <madhav.chauhan@intel.com>
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1537095223-5184-6-git-send-email-madhav.chauhan@intel.com

On skylake we can switch to a high quality scaler mode when only 1 out
of 2 scalers are used, but on GLK and later bit 28 has a different
meaning. Don't set it, and make clear the distinction between
SKL and later PS values.

Changes since v1:
- Add missing break statement.
Signed-off-by: NMaarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: NMatt Roper <matthew.d.roper@intel.com>
[mlankhorst: Remove extra newline]
Link: https://patchwork.freedesktop.org/patch/msgid/20180921144437.20037-1-maarten.lankhorst@linux.intel.com