- 05 7月, 2011 4 次提交
-
-
由 Marek Lindner 提交于
The primary interface OGM has to be broadcasted on all hard-interfaces even if the primary interface is not the first interface (if_num = 0). Therefore the code has to compare the originating interface with the primary interface instead of checking the if_num. Reported-by: NLinus Luessing <linus.luessing@web.de> Signed-off-by: NMarek Lindner <lindner_marek@yahoo.de>
-
由 Antonio Quartulli 提交于
now tt_local_event() takes a flags argument instead of a sequence of boolean values which would grow up with the time. Signed-off-by: NAntonio Quartulli <ordex@autistici.org> Signed-off-by: NMarek Lindner <lindner_marek@yahoo.de>
-
由 Antonio Quartulli 提交于
In order to make possible to use the broadcast list for delayed sendings the "delay" parameter is now provided instead of using 1 as hardcoded value. Signed-off-by: NAntonio Quartulli <ordex@autistici.org> Signed-off-by: NMarek Lindner <lindner_marek@yahoo.de>
-
由 Antonio Quartulli 提交于
The tt_local_entry structure now has a 'flags' field. This helps to unify the flags format to all the client related structures (tt_global_entry and tt_change). The 'never_purge' field is now encoded in the 'flags' one. To optimise the usage of this field, its length has been increased to 16bit in order to use the eight leading bits (from 0 to 7) to store flags that have to be sent on the wire, while the eight ending ones are used for local computation only. Moreover 'enum tt_change_flags' is now called 'enum tt_client_flags' and the defined values apply to the tt_local_entry, tt_global_entry and the tt_change 'flags' field. Signed-off-by: NAntonio Quartulli <ordex@autistici.org> Signed-off-by: NMarek Lindner <lindner_marek@yahoo.de>
-
- 20 6月, 2011 12 次提交
-
-
由 Antonio Quartulli 提交于
If a client issues a DHCPREQUEST for renewal, the packet is dropped if the old destination (the old gateway for the client) TQ is smaller than the current best gateway TQ less GW_THRESHOLD Signed-off-by: NAntonio Quartulli <ordex@autistici.org> Signed-off-by: NMarek Lindner <lindner_marek@yahoo.de> Signed-off-by: NSven Eckelmann <sven@narfation.org>
-
由 Antonio Quartulli 提交于
In case of new default gw, changing the default gw or deleting the default gw a uevent is triggered with type=gw, action=add/change/del and data={GW_ORIG_ADDRESS} (if any). Signed-off-by: NAntonio Quartulli <ordex@autistici.org> Signed-off-by: NMarek Lindner <lindner_marek@yahoo.de> Signed-off-by: NSven Eckelmann <sven@narfation.org>
-
由 Antonio Quartulli 提交于
The gateway election mechanism has been a little revised. Now the gw_election is trigered by an atomic_t flag (gw_reselect) which is set to 1 in case of election needed, avoding to set curr_gw to NULL. Signed-off-by: NAntonio Quartulli <ordex@autistici.org> Signed-off-by: NMarek Lindner <lindner_marek@yahoo.de> Signed-off-by: NSven Eckelmann <sven@narfation.org>
-
由 Antonio Quartulli 提交于
Using throw_uevent() is now possible to trigger uevent signal that can be recognised in userspace. Uevents will be triggered through the /devices/virtual/net/{MESH_IFACE} kobject. A triggered uevent has three properties: - type: the event class. Who generates the event (only 'gw' is currently defined). Corresponds to the BATTYPE uevent variable. - action: the associated action with the event ('add'/'change'/'del' are currently defined). Corresponds to the BATACTION uevent variable. - data: any useful data for the userspace. Corresponds to the BATDATA uevent variable. Signed-off-by: NAntonio Quartulli <ordex@autistici.org> Signed-off-by: NSven Eckelmann <sven@narfation.org>
-
由 Antonio Quartulli 提交于
The local and the global translation-tables are now lock free and rcu protected. Signed-off-by: NAntonio Quartulli <ordex@autistici.org> Acked-by: NSimon Wunderlich <siwu@hrz.tu-chemnitz.de> Signed-off-by: NSven Eckelmann <sven@narfation.org>
-
由 Antonio Quartulli 提交于
With the current client announcement implementation, in case of roaming, an update is triggered on the new AP serving the client. At that point the new information is spread around by means of the OGM broadcasting mechanism. Until this operations is not executed, no node is able to correctly route traffic towards the client. This obviously causes packet drops and introduces a delay in the time needed by the client to recover its connections. A new packet type called ROAMING_ADVERTISEMENT is added to account this issue. This message is sent in case of roaming from the new AP serving the client to the old one and will contain the client MAC address. In this way an out-of-OGM update is immediately committed, so that the old node can update its global translation table. Traffic reaching this node will then be redirected to the correct destination utilising the fresher information. Thus reducing the packet drops and the connection recovery delay. Signed-off-by: NAntonio Quartulli <ordex@autistici.org> Signed-off-by: NSven Eckelmann <sven@narfation.org>
-
由 Antonio Quartulli 提交于
The client announcement mechanism informs every mesh node in the network of any connected non-mesh client, in order to find the path towards that client from any given point in the mesh. The old implementation was based on the simple idea of appending a data buffer to each OGM containing all the client MAC addresses the node is serving. All other nodes can populate their global translation tables (table which links client MAC addresses to node addresses) using this MAC address buffer and linking it to the node's address contained in the OGM. A node that wants to contact a client has to lookup the node the client is connected to and its address in the global translation table. It is easy to understand that this implementation suffers from several issues: - big overhead (each and every OGM contains the entire list of connected clients) - high latencies for client route updates due to long OGM trip time and OGM losses The new implementation addresses these issues by appending client changes (new client joined or a client left) to the OGM instead of filling it with all the client addresses each time. In this way nodes can modify their global tables by means of "updates", thus reducing the overhead within the OGMs. To keep the entire network in sync each node maintains a translation table version number (ttvn) and a translation table checksum. These values are spread with the OGM to allow all the network participants to determine whether or not they need to update their translation table information. When a translation table lookup is performed in order to send a packet to a client attached to another node, the destination's ttvn is added to the payload packet. Forwarding nodes can compare the packet's ttvn with their destination's ttvn (this node could have a fresher information than the source) and re-route the packet if necessary. This greatly reduces the packet loss of clients roaming from one AP to the next. Signed-off-by: NAntonio Quartulli <ordex@autistici.org> Signed-off-by: NMarek Lindner <lindner_marek@yahoo.de> Signed-off-by: NSven Eckelmann <sven@narfation.org>
-
由 Antonio Quartulli 提交于
The amount of duplicated code in the receive and routing code can be reduced when all headers provide the packet type, version and ttl in the same first bytes. Signed-off-by: NAntonio Quartulli <ordex@autistici.org> Signed-off-by: NSven Eckelmann <sven@narfation.org>
-
由 Sven Eckelmann 提交于
char was used in different places to store information without really using the characteristics of that data type or by ignoring the fact that char has not a well defined signedness. Signed-off-by: NSven Eckelmann <sven@narfation.org>
-
由 David Howells 提交于
count_real_packets() in batman-adv assumes char is signed, and returns -1 through it: net/batman-adv/routing.c: In function 'receive_bat_packet': net/batman-adv/routing.c:739: warning: comparison is always false due to limited range of data type Use int instead. Signed-off-by: NDavid Howells <dhowells@redhat.com> [sven@narfation.org: Rebase on top of current version] Signed-off-by: NSven Eckelmann <sven@narfation.org>
-
由 Sven Eckelmann 提交于
interface_tx is not used outside of soft-interface.c and thus doesn't need to be declared inside soft-interface.h Signed-off-by: NSven Eckelmann <sven@narfation.org>
-
由 Sven Eckelmann 提交于
compare_orig is only used in context of orig_node which is managed inside originator.c. It is not necessary to keep that function inside the header originator.h. Signed-off-by: NSven Eckelmann <sven@narfation.org>
-
- 10 6月, 2011 6 次提交
-
-
由 Marek Lindner 提交于
The definition NO_FLAGS was introduced to make the code more readable and shall be used to initialize flag fields. Signed-off-by: NMarek Lindner <lindner_marek@yahoo.de> Signed-off-by: NSven Eckelmann <sven@narfation.org>
-
由 Sven Eckelmann 提交于
CodingStyle "Chapter 12: Macros, Enums and RTL" recommends to use enums for several related constants. Internal states can be used without defining the actual value, but all values which are visible to the outside must be defined as before. Normal values are assigned as usual and flags are defined by shifts of a bit. Signed-off-by: NSven Eckelmann <sven@narfation.org>
-
由 Sven Eckelmann 提交于
CodingStyle "Chapter 12: Macros, Enums and RTL" highly recommends to use functions instead of macros were possible. This ensures type safety and prevents shadowing of other variables. Signed-off-by: NSven Eckelmann <sven@narfation.org>
-
由 Sven Eckelmann 提交于
strict_strtoul as used in parse_gw_bandwidth is defined for unsigned long and strict_strtol should be used instead for long. Signed-off-by: NSven Eckelmann <sven@narfation.org>
-
由 Sven Eckelmann 提交于
gw_node_delete is defined with "void" as return type, but still tries to return a value. The called function gw_node_delete is also return as void and thus doesn't provide a value for us. Signed-off-by: NSven Eckelmann <sven@narfation.org>
-
由 Daniele Furlan 提交于
When a link is saturated (re)broadcasts of OGMs are delayed. Under heavy load this delay may exceed the orig interval which leads to OGMs being dropped (the code would only accept an OGM rebroadcast if it arrived before the next OGM was broadcasted). With this patch batman-adv will also accept delayed OGMs in order to avoid a bogus influence on the routing metric. Signed-off-by: NDaniele Furlan <daniele.furlan@gmail.com> Signed-off-by: NSven Eckelmann <sven@narfation.org>
-
- 30 5月, 2011 18 次提交
-
-
由 Sven Eckelmann 提交于
The debug output of update_route has tests for "route deleted" and "route added". All other situations are handled as "route changed". This is not true because neigh_node and curr_router could be both NULL. The function is not called in this situation, but the code might be interpreted wrong when reading it without this test. Signed-off-by: NSven Eckelmann <sven@narfation.org>
-
由 Antonio Quartulli 提交于
This comment has been wrongly put after the variable it refers to and was also bad indented Signed-off-by: NAntonio Quartulli <ordex@autistici.org> Acked-by: NSven Eckelmann <sven@narfation.org> Signed-off-by: NSven Eckelmann <sven@narfation.org>
-
由 Antonio Quartulli 提交于
Instead of comparing mac addresses with the broadcast address by means of compare_eth(), the is_broadcast_ether_addr() kernel function has to be used. Signed-off-by: NAntonio Quartulli <ordex@autistici.org> Acked-by: NSven Eckelmann <sven@narfation.org> Signed-off-by: NSven Eckelmann <sven@narfation.org>
-
由 Sven Eckelmann 提交于
seq_before and seq_after depend on the fact that both sequence numbers have the same type and thus the same bitwidth. We can ensure that by compile time checking using a compare between the pointer to the temporary buffers which were created using the typeof of both parameters. For example gcc would create a warning like "warning: comparison of distinct pointer types lacks a cast". Signed-off-by: NSven Eckelmann <sven@narfation.org>
-
由 Antonio Quartulli 提交于
smallest_signed_int(), seq_before() and seq_after() are very useful functions that help to handle comparisons between sequence numbers. However they were only defined in vis.c. With this patch every batman-adv function will be able to use them. Signed-off-by: NAntonio Quartulli <ordex@autistici.org> Signed-off-by: NSven Eckelmann <sven@narfation.org>
-
由 Sven Eckelmann 提交于
Usually rcu_dereference isn't necessary in situations were the RCU-protected data structure cannot change, but sparse and lockdep still need a similar functionality for analysis. rcu_dereference_protected implements the reduced version which should be used to support the dynamic and static analysis. Signed-off-by: NSven Eckelmann <sven@narfation.org>
-
由 Sven Eckelmann 提交于
Documentation/CodingStyle recommends to use the form p = kmalloc(sizeof(*p), ...); to calculate the size of a struct and not the version where the struct name is spelled out to prevent bugs when the type of p changes. This also seems appropriate for manipulation of buffers when they are directly associated with p. Signed-off-by: NSven Eckelmann <sven@narfation.org>
-
由 Sven Eckelmann 提交于
Casting from pointer like 'struct orig_node*' to 'struct orig_node *' doesn't provide any additional functionality and can be savely removed. Signed-off-by: NSven Eckelmann <sven@narfation.org>
-
由 Sven Eckelmann 提交于
It is not necessary to cast a void* to the pointer type when we just store it and don't want to do pointer arithmetic before the actual assignment. Signed-off-by: NSven Eckelmann <sven@narfation.org>
-
由 Sven Eckelmann 提交于
It is not save to provide memory for an int and then cast the pointer to it to long*. It is better to standardize the up and down gateway bandwith representation to simple ints and only use long inside conversation routines. Signed-off-by: NSven Eckelmann <sven@narfation.org>
-
由 Sven Eckelmann 提交于
batman-adv uses pointers which are marked as const and should not violate that type qualifier by passing it to functions which force a cast to the non-const version. Signed-off-by: NSven Eckelmann <sven@narfation.org>
-
由 Sven Eckelmann 提交于
The size of void is currently set by gcc to 1, but is not well defined in general. Therefore it is more advisable to cast it to char* before doing pointer arithmetic. Signed-off-by: NSven Eckelmann <sven@narfation.org>
-
由 Sven Eckelmann 提交于
Signed-off-by: NSven Eckelmann <sven@narfation.org>
-
由 Sven Eckelmann 提交于
Signed-off-by: NSven Eckelmann <sven@narfation.org>
-
由 Sven Eckelmann 提交于
Signed-off-by: NSven Eckelmann <sven@narfation.org>
-
由 Sven Eckelmann 提交于
Signed-off-by: NSven Eckelmann <sven@narfation.org>
-
由 Antonio Quartulli 提交于
Every time that find_router() is invoked, if_status has to be compared with IF_ACTIVE. Moving this comparison inside find_router() will avoid to write it each time. Signed-off-by: NAntonio Quartulli <ordex@autistici.org> Signed-off-by: NSven Eckelmann <sven@narfation.org>
-
由 Linus Torvalds 提交于
.. except there are various scripts that really know that there are three numbers, so it calls itself "3.0.0-rc1". Hopefully by the time the final 3.0 is out, we'll have that extra zero all figured out. Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-