This uses the EDID info from my HTC Vive to mark it as
non-desktop.

v2: Change description from non-standard to non-desktop
Reviewed-by: NKeith Packard <keithp@keithp.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

This adds the infrastructure needed to quirk displays
using edid and to mark them a non-desktop.

A non-desktop display is one which shouldn't normally be included
as a part of a desktop environment.

This is meant to cover head mounted devices like HTC Vive.

v2: Change description from non-standard to non-desktop, add docs
Reviewed-by: NKeith Packard <keithp@keithp.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

fixup docs

Appedix F of HDMI 2.0 says that some HDMI sink may fail to switch from
3D to 2D mode in a timely fashion if the source simply stops sending the
HDMI infoframe. The suggested workaround is to keep sending the
infoframe even when strictly not necessary (ie. no VIC and no S3D).
HDMI 1.4 does allow for this behaviour, stating that sending the
infoframe is optional in this case.

The infoframe was first specified in HDMI 1.4, so in theory sinks
predating that may not appreciate us sending an uknown infoframe
their way. To avoid regressions let's try to determine if the sink
supports the infoframe or not. Unfortunately there's no direct way
to do that, so instead we'll just check if we managed to parse any
HDMI 1.4 4k or stereo modes from the EDID, and if so we assume the
sink will accept the infoframe. Also if the EDID contains the HDMI
2.0 HDMI Forum VSDB we can assume the sink is prepared to receive
the infoframe.

v2: Fix getting has_hdmi_infoframe from display_info
    Always fail constructing the infoframe if the display
    possibly can't handle it

Cc: Shashank Sharma <shashank.sharma@intel.com>
Cc: Andrzej Hajda <a.hajda@samsung.com>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: NShashank Sharma <shashank.sharma@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171113170427.4150-3-ville.syrjala@linux.intel.com

Apparently some sinks look at the YQ bits even when receiving RGB,
and they get somehow confused when they see a non-zero YQ value.
So we can't just blindly follow CEA-861-F and set YQ to match the
RGB range.

Unfortunately there is no good way to tell whether the sink
designer claims to have read CEA-861-F. The CEA extension block
revision number has generally been stuck at 3 since forever,
and even a very recently manufactured sink might be based on
an old design so the manufacturing date doesn't seem like
something we can use. In lieu of better information let's
follow CEA-861-F only for HDMI 2.0 sinks, since HDMI 2.0 is
based on CEA-861-F. For HDMI 1.x sinks we'll always set YQ=0.

The alternative would of course be to always set YQ=0. And if
we ever encounter a HDMI 2.0+ sink with this bug that's what
we'll probably have to do.

Cc: stable@vger.kernel.org
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Eric Anholt <eric@anholt.net>
Cc: Neil Kownacki <njkkow@gmail.com>
Reported-by: NNeil Kownacki <njkkow@gmail.com>
Tested-by: NNeil Kownacki <njkkow@gmail.com>
Fixes: fcc8a22c ("drm/edid: Set YQ bits in the AVI infoframe according to CEA-861-F")
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=101639Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171108152504.12596-1-ville.syrjala@linux.intel.comAcked-by: NEric Anholt <eric@anholt.net>

This is no longer needed outside of drm_edid.c.
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Acked-by: NThierry Reding <treding@nvidia.com>
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/9c0be7b97d0144ed0419c87ac42b30f5835ca7e6.1509545641.git.jani.nikula@intel.com

Call drm_edid_to_eld() from drm_add_edid_modes() to fill in the ELD
automatically. There's no harm in doing this for connectors that do not
support audio.
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Acked-by: NThierry Reding <treding@nvidia.com>
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/551b2e1cf19be04c510e7865d7539cfc2f54ea89.1509545641.git.jani.nikula@intel.com

Preparation for future work. No functional changes.
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Acked-by: NThierry Reding <treding@nvidia.com>
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/95e83e7a62566b65a56c8cb5038ddf0c6b8e5e95.1509545641.git.jani.nikula@intel.com

Since drm_edid_to_eld() knows the connector type, we can set the type in
ELD while at it. Most connectors this gets called on are not DP
encoders, and with the HDMI type being 0, this does not change behaviour
for non-DP.

For i915 having this in place earlier would have saved a considerable
amount of debugging that lead to the fix 2d8f6329 ("drm/i915: always
update ELD connector type after get modes"). I don't see other drivers,
even the ones calling drm_edid_to_eld() on DP connectors, setting the
connector type in ELD.

Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Archit Taneja <architt@codeaurora.org>
Cc: Andrzej Hajda <a.hajda@samsung.com>
Cc: Russell King <linux@armlinux.org.uk>
Cc: CK Hu <ck.hu@mediatek.com>
Cc: Philipp Zabel <p.zabel@pengutronix.de>
Cc: Ben Skeggs <bskeggs@redhat.com>
Cc: Mark Yao <mark.yao@rock-chips.com>
Cc: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Cc: Vincent Abriou <vincent.abriou@st.com>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Eric Anholt <eric@anholt.net>
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Acked-by: NThierry Reding <treding@nvidia.com>
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/d527b31619528c477c2c136f25cdf118bc0cfc1d.1509545641.git.jani.nikula@intel.com

We have the macros, use them. No functional changes.
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Acked-by: NThierry Reding <treding@nvidia.com>
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/36f00f018280a04d2db806574d337f7512986c86.1509545641.git.jani.nikula@intel.com

Handle debugfs override edid and firmware edid at the low level to
transparently and completely replace the real edid. Previously, we
practically only used the modes from the override EDID, and none of the
other data, such as audio parameters.

This change also prevents actual EDID reads when the EDID is to be
overridden, but retains the DDC probe. This is useful if the reason for
preferring override EDID are problems with reading the data, or
corruption of the data.

Move firmware EDID loading from helper to core, as the functionality
moves to lower level as well. This will result in a change of module
parameter from drm_kms_helper.edid_firmware to drm.edid_firmware, which
arguably makes more sense anyway.

Some future work remains related to override and firmware EDID
validation. Like before, no validation is done for override EDID. The
firmware EDID is validated separately in the loader. Some unification
and deduplication would be in order, to validate all of them at the
drm_do_get_edid() level, like "real" EDIDs.

v2: move firmware loading to core

v3: rebase, commit message refresh

Cc: Abdiel Janulgue <abdiel.janulgue@linux.intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Tested-by: NAbdiel Janulgue <abdiel.janulgue@linux.intel.com>
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Acked-by: NDave Airlie <airlied@gmail.com>
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1e8a710bcac46e5136c1a7b430074893c81f364a.1505203831.git.jani.nikula@intel.com

CEA-861-F spec adds ycbcr420 deep color support information
in hf-vsdb block. This patch extends the existing hf-vsdb parsing
function by adding parsing of ycbcr420 deep color support from the
EDID and adding it into display information stored.

V2: Rebase
V3: Rebase
V4: Moved definition of y420_dc_modes into this patch, where its used
    (Ville)
V5: Optimize function, if(conditions) not reqd (Ville)
V6: Rebase
V7: Rebase

Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Jose Abreu <joabreu@synopsys.com>
Signed-off-by: NShashank Sharma <shashank.sharma@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1499960000-9232-8-git-send-email-shashank.sharma@intel.com
[vsyrjala: Fix sparse indentation warn]
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>

HDMI 2.0 spec adds support for YCBCR420 sub-sampled output.
CEA-861-F adds two new blocks in EDID's CEA extension blocks,
to provide information about sink's YCBCR420 output capabilities.

These blocks are:

- YCBCR420vdb(YCBCR 420 video data block):
This block contains VICs of video modes, which can be sopported only
in YCBCR420 output mode (Not in RGB/YCBCR444/422. Its like a normal
SVD block, valid for YCBCR420 modes only.

- YCBCR420cmdb(YCBCR 420 capability map data block):
This block gives information about video modes which can support
YCBCR420 output mode also (along with RGB,YCBCR444/422 etc) This
block contains a bitmap index of normal svd videomodes, which can
support YCBCR420 output too.
So if bit 0 from first vcb byte is set, first video mode in the svd
list can support YCBCR420 output too. Bit 1 means second video mode
from svd list can support YCBCR420 output too, and so on.

This patch adds two bitmaps in display's hdmi_info structure, one each
for VCB and VDB modes. If the source is HDMI 2.0 capable, this patch
adds:
- VDB modes (YCBCR 420 only modes) in connector's mode list, also makes
  an entry in the vdb_bitmap per vic.
- VCB modes (YCBCR 420 also modes) only entry in the vcb_bitmap.

Cc: Ville Syrjala <ville.syrjala@linux.intel.com>
Cc: Jose Abreu <joabreu@synopsys.com>
Cc: Emil Velikov <emil.l.velikov@gmail.com>

V2: Addressed
    Review comments from Emil:
    - Use 1ULL<<i instead of 1<<i to make sure the output is 64bit.
    - Use the suggested method for updating dbmap.
    - Add documentation for YCBCR420_vcb_map to fix kbuild warning.

    Review comments from Ville:
    - Do not expose the YCBCR420 flags in uabi layer, keep it internal.
    - Save a map of YCBCR420 modes for future reference.
    - Check db length before trying to parse extended tag.
    - Add a warning if there are > 64 modes in capability map block.
    - Use y420cmdb in function names and macros while dealing with vcb
      to be aligned with spec.
    - Move the display information parsing block ahead of mode parsing
      blocks.

V3: Addressed design/review comments from Ville
    - Do not add flags in video modes, else we have to expose them to user
    - There should not be a UABI change, and kernel should detect the
      choice of the output based on type of mode, and the bitmaps.
    - Use standard bitops from kernel bitmap header, instead of calculating
      bit positions manually.

V4: Addressed review comments from Ville:
    - s/ycbcr_420_vdb/y420vdb
    - s/ycbcr_420_vcb/y420cmdb
    - Be less verbose on description of do_y420vdb_modes
    - Move newmode variable in the loop scope.
    - Use svd_to_vic() to get a VIC, instead of 0x7f
    - Remove bitmap description for CMDB modes & VDB modes
    - Dont add connector->ycbcr_420_allowed check for cmdb modes
    - Remove 'len' variable, in is_y420cmdb function, which is used
      only once
    - Add length check in is_y420vdb function
    - Remove unnecessary if (!db) check in function parse_y420cmdb_bitmap
    - Do not add print about YCBCR 420 modes
    - Fix indentation in few places
    - Move ycbcr420_dc_modes in next patch, where its used
    - Add a separate patch for movement of drm_add_display_info()

V5: Addressed review comments from Ville:
    - Add the patch which cleans up the current EXTENDED_TAG usage
    - Make y420_cmdb_map u64
    - Do not block ycbcr420 modes while parsing the EDID, rather
      add a separate helper function to prune ycbcr420-only modes from
      connector's probed modes.

V6: Rebase
V7: Move this patch after the 420_only validation patch (Ville)
V8: Addressed review comments from Ville
    - use cea_vic_valid check before adding cmdb/vdb modes
    - add check for i < 64 while adding cmdb modes
    - use 1ULL while checking bitmap
Signed-off-by: NShashank Sharma <shashank.sharma@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1500028426-14883-1-git-send-email-shashank.sharma@intel.com
[vsyrjala: Fix checkpatch complaints and indentation]
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>

CEA-861-F introduces extended tag codes for EDID extension blocks,
which indicates the actual type of the data block. The code for
using exteded tag is 0x7, whereas in the existing code, the
corresponding macro is named as "VIDEO_CAPABILITY_BLOCK"

This patch renames the macro and usages from "VIDEO_CAPABILITY_BLOCK"
to "USE_EXTENDED_TAG"

V2: Add extended tag code check for video capabilitiy block (ville)
V3: Ville:
	- Use suggested names for macros
	- Check the block length first, before checking the extended tag
V4: Fix commit message (David)
V5: Introduced this patch into HDMI-YCBCR-output series
V6: Rebase
V7: Rebase

Cc: Ville Syrjala <ville.syrjala@linux.intel.com>
Signed-off-by: NShashank Sharma <shashank.sharma@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1499960000-9232-5-git-send-email-shashank.sharma@intel.comSigned-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>

CEA-861-F adds ycbcr capability map block, for HDMI 2.0 sinks.
This block contains a map of indexes of CEA modes, which can
support YCBCR 420 output also. To avoid multiple parsing of same
CEA block, let's parse the sink information and get this map, before
parsing CEA modes.

This patch moves the call to drm_add_display_info function, before the
mode parsing block.

V4: Introduced new patch in the series
V5: Move this patch before 4:2:0 parsing patch (ville)
    Added r-b from Ville
V6: Rebase
V7: Rebase
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NShashank Sharma <shashank.sharma@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1499960000-9232-4-git-send-email-shashank.sharma@intel.comSigned-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>

CEA-861-F specs defines new video modes to be used with
HDMI 2.0 EDIDs. The VIC range has been extended from 1-64 to
1-107.

Our existing CEA modedb contains only 64 modes (VIC=1 to VIC=64). Now
to be able to parse new CEA modes using the existing methods, we have
to complete the modedb (VIC=65 onwards).

This patch adds:
- Timings for existing CEA video modes (from VIC=65 till VIC=92)
- Newly added 4k modes (from VIC=93 to VIC=107).

The patch was originaly discussed and reviewed here:
https://patchwork.freedesktop.org/patch/135810/

Cc: Ville Syrjala <ville.syrjala@linux.intel.com>
Cc: Jose Abreu <Jose.Abreu@synopsys.com>
Cc: Andrzej Hajda <a.hajda@samsung.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Harry Wentland <harry.wentland@amd.com>

V2: Rebase
V3: Rebase
V4: Added native bit handling as per CEA-861-F spec (Ville)
V5: Fix timings for VIC 77:1920x1080 and 104:3840x2160p (Ville)
    Remove unnecessary paranthesis from function svd_to_vic (Ville)
    Added r-b (Neil)
V6: Rebase
V7: Fix indentation for modes from VIC 80
Reviewed-by: NJose Abreu <Jose.Abreu@synopsys.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Reviewed-by: NNeil Armstrong <narmstrong@baylibre.com>
Acked-by: NHarry Wentland <harry.wentland@amd.com>
Signed-off-by: NShashank Sharma <shashank.sharma@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1499960000-9232-3-git-send-email-shashank.sharma@intel.com
[vsyrjala: Fix up remaining formatting/indentation issues]
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>

HDMI 1.4b support the CEA video modes as per range of CEA-861-D (VIC 1-64).
For any other mode, the VIC filed in AVI infoframes should be 0.
HDMI 2.0 sinks, support video modes range as per CEA-861-F spec, which is
extended to (VIC 1-107).

This patch adds a bool input variable, which indicates if the connected
sink is a HDMI 2.0 sink or not. This will make sure that we don't pass a
HDMI 2.0 VIC to a HDMI 1.4 sink.

This patch touches all drm drivers, who are callers of this function
drm_hdmi_avi_infoframe_from_display_mode but to make sure there is
no change in current behavior, is_hdmi2 is kept as false.

In case of I915 driver, this patch:
- checks if the connected display is HDMI 2.0.
- HDMI infoframes carry one of this two type of information:
	- VIC for 4K modes for HDMI 1.4 sinks
	- S3D information for S3D modes
  As CEA-861-F has already defined VICs for 4K videomodes, this
  patch doesn't allow sending HDMI infoframes for HDMI 2.0 sinks,
  until the mode is 3D.

Cc: Ville Syrjala <ville.syrjala@linux.intel.com>
Cc: Jose Abreu <jose.abreu@synopsys.com>
Cc: Andrzej Hajda <a.hajda@samsung.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Daniel Vetter <daniel.vetter@intel.com>

PS: This patch touches a few lines in few files, which were
already above 80 char, so checkpatch gives 80 char warning again.
- gpu/drm/omapdrm/omap_encoder.c
- gpu/drm/i915/intel_sdvo.c

V2: Rebase, Added r-b from Andrzej
V3: Addressed review comment from Ville:
	- Do not send VICs in both AVI-IF and HDMI-IF
	  send only one of it.
V4: Rebase
V5: Added r-b from Neil.
    Addressed review comments from Ville
    - Do not block HDMI vendor IF, instead check for VIC while
      handling AVI infoframes
V6: Rebase
V7: Rebase
Reviewed-by: NAndrzej Hajda <a.hajda@samsung.com>
Reviewed-by: NNeil Armstrong <narmstrong@baylibre.com>
Signed-off-by: NShashank Sharma <shashank.sharma@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1499960000-9232-2-git-send-email-shashank.sharma@intel.comSigned-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>

The builtin eDP panel in the HP zBook 17 G2 supports 10 bpc,
as advertised by the Laptops product specs and verified via
injecting a fixed edid + photometer measurements, but edid
reports unknown depth, so drivers fall back to 6 bpc.

Add a quirk to get the full 10 bpc.

Cc: stable@vger.kernel.org
Signed-off-by: NMario Kleiner <mario.kleiner.de@gmail.com>
Acked-by: NHarry Wentland <harry.wentland@amd.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1492787108-23959-1-git-send-email-mario.kleiner.de@gmail.com

This patch does following:
- Adds a new structure (drm_hdmi_info) in drm_display_info.
  This structure will be used to save and indicate if sink
  supports advanced HDMI 2.0 features
- Adds another structure drm_scdc within drm_hdmi_info, to
  reflect scdc support and capabilities in connected HDMI 2.0 sink.
- Checks the HF-VSDB block for presence of SCDC, and marks it
  in scdc structure
- If SCDC is present, checks if sink is capable of generating
  SCDC read request, and marks it in scdc structure.

V2: Addressed review comments
  Thierry:
  - Fix typos in commit message and make abbreviation consistent
    across the commit message.
  - Change structure object name from hdmi_info -> hdmi
  - Fix typos and abbreviations in description of structure drm_hdmi_info
    end the description with a full stop.
  - Create a structure drm_scdc, and keep all information related to SCDC
    register set (supported, read request supported) etc in it.

  Ville:
  - Change rr -> read_request
  - Call drm_detect_scrambling function drm_parse_hf_vsdb so that all
    of HF-VSDB parsing can be kept in same function, in incremental
    patches.

V3: Rebase.
V4: Rebase.
V5: Rebase.
V6: Addressed review comments from Ville
  - Add clock rate calculations for 1/10 and 1/40 ratios
  - Remove leftovers from old patchset
V7: Added R-B from Jose.
V8: Rebase.
V9: Rebase.
V10: Rebase.
Signed-off-by: NShashank Sharma <shashank.sharma@intel.com>
Reviewed-by: NThierry Reding <treding@nvidia.com>
Reviewed-by: NJose Abreu <joabreu@synopsys.com>
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1489404244-16608-5-git-send-email-shashank.sharma@intel.com

This patch does following:
- Adds a new structure (drm_hdmi_info) in drm_display_info.
  This structure will be used to save and indicate if sink
  supports advanced HDMI 2.0 features
- Adds another structure drm_scdc within drm_hdmi_info, to
  reflect scdc support and capabilities in connected HDMI 2.0 sink.
- Checks the HF-VSDB block for presence of SCDC, and marks it
  in scdc structure
- If SCDC is present, checks if sink is capable of generating
  SCDC read request, and marks it in scdc structure.

V2: Addressed review comments
 Thierry:
 - Fix typos in commit message and make abbreviation consistent
   across the commit message.
 - Change structure object name from hdmi_info -> hdmi
 - Fix typos and abbreviations in description of structure drm_hdmi_info
   end the description with a full stop.
 - Create a structure drm_scdc, and keep all information related to SCDC
   register set (supported, read request supported) etc in it.

Ville:
 - Change rr -> read_request
 - Call drm_detect_scrambling function drm_parse_hf_vsdb so that all
   of HF-VSDB parsing can be kept in same function, in incremental
   patches.

V3: Rebase.
V4: Rebase.
V5: Rebase.
V6: Rebase.
V7: Added R-B from Jose.
V8: Rebase.
V9: Rebase.
V10: Rebase.
Signed-off-by: NShashank Sharma <shashank.sharma@intel.com>
Reviewed-by: NThierry Reding <treding@nvidia.com>
Reviewed-by: NJose Abreu <joabreu@synopsys.com>
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1489404244-16608-4-git-send-email-shashank.sharma@intel.com

This patch implements a small function that finds if a
given CEA db is hdmi-forum vendor specific data block
or not.

V2: Rebase.
V3: Added R-B from Jose.
V4: Rebase
V5: Rebase
V6: Rebase
V7: Rebase
V8: Rebase
V9: Rebase
V10: Rebase
Signed-off-by: NThierry Reding <treding@nvidia.com>
Signed-off-by: NShashank Sharma <shashank.sharma@intel.com>
Reviewed-by: NJose Abreu <joabreu@synopsys.com>
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1489404244-16608-3-git-send-email-shashank.sharma@intel.com

Rotel RSX-1058 is a receiver with 4 HDMI inputs and a HDMI output, all
1.1.

When a sink that supports deep color is connected to the output, the
receiver will send EDIDs that advertise this capability, even if it
isn't possible with HDMI versions earlier than 1.3.

Currently the kernel is assuming that deep color is possible and the
sink displays an error.

This quirk will make sure that deep color isn't used with this
particular receiver.

Fixes: 7a0baa62 ("Revert "drm/i915: Disable 12bpc hdmi for now"")
Signed-off-by: NTomeu Vizoso <tomeu.vizoso@collabora.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170220152545.13153-1-tomeu.vizoso@collabora.com
Cc: stable@vger.kernel.org
Cc: Matt Horan <matt@matthoran.com>
Tested-by: NMatt Horan <matt@matthoran.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=99869Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>

Use a more common logging style.

Miscellanea:

o Coalesce formats and realign arguments
Signed-off-by: NJoe Perches <joe@perches.com>
[danvet: Resolve minor conflict in drm_edid.c]
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Skip DDC probe for forced connector status. Don't try to read the EDID
if the connector is forced off. Skipping probe for forced on connectors
will make more sense when drm_do_get_edid() will handle override and
firmware EDIDs.
Suggested-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1487344854-18777-4-git-send-email-jani.nikula@intel.com

Make the drm_edid_to_eld() function useful for resetting, not just
setting, the ELD and HDMI VSDB data, without debug warnings about
missing CEA extensions.
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1487344854-18777-3-git-send-email-jani.nikula@intel.com

The warnings from parsing the EDID are not driver errors, but the
"normal but significant" conditions from the external device. As such,
they do not need the ferocity of an *ERROR*, but can use the less harsh
DRM_NOTE instead.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20170210195913.9878-1-chris@chris-wilson.co.uk

It's common to share screens within CI labs, and it's also common for
KVM switches to alter the contents of the CEA block but leave the
checksum outdated.

So in this case, print a debug message instead of an error.

References: https://bugs.freedesktop.org/show_bug.cgi?id=98228
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tomi Sarvela <tomi.p.sarvela@intel.com>
Cc: intel-gfx@lists.freedesktop.org
Signed-off-by: NTomeu Vizoso <tomeu.vizoso@collabora.com>
Tested-by: NJari Tahvanainen <jari.tahvanainen@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1481202716-31317-1-git-send-email-tomeu.vizoso@collabora.com

This is just a cleanup, no functional change.

The fixup code for 1366x768 in drm_mode_create_from_cmdline_mode() is
basically a copy of the existing code in drm_edid.c.  Make the latter
code public so that it can be called from the former function.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Link: http://patchwork.freedesktop.org/patch/msgid/20170117164329.10551-1-tiwai@suse.deReviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
[vsyrjala: include drm_crtc_internal.h to make sparse happy]
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>

CEA-861-F tells us:
"When transmitting any RGB colorimetry, the Source should set the
 YQ-field to match the RGB Quantization Range being transmitted
 (e.g., when Limited Range RGB, set YQ=0 or when Full Range RGB,
 set YQ=1) and the Sink shall ignore the YQ-field."

So let's go ahead and do that. Perhaps there are sinks that don't
ignore the YQ as they should for RGB?

I wasn't able to find similar text in CEA-861-E, so it would seem
to be a fairly "recent" addition.
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170111125725.8086-6-ville.syrjala@linux.intel.comReviewed-by: NJani Nikula <jani.nikula@intel.com>
Acked-by: NEric Anholt <eric@anholt.net>

HDMI 2.0 recommends that we set the Q bits in the AVI infoframe
even when the sink does not support quantization range selection (QS=0).
According to CEA-861 we can do that as long as the Q we send matches
the default quantization range for the mode.

Previously I think I had misread the spec as saying that you can't
send a non-zero Q at all when QS=0. But that's not what the spec
actually says.

v2: Fix typo in commit message (Jani)
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170111125725.8086-5-ville.syrjala@linux.intel.comReviewed-by: NJani Nikula <jani.nikula@intel.com>
Acked-by: NEric Anholt <eric@anholt.net>

Pull the logic to populate the quantization range information
in the AVI infoframe into a small helper. We'll be adding a bit
more logic to it, and having it in a central place seems like a
good idea since it's based on the CEA-861 spec.
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170111125725.8086-4-ville.syrjala@linux.intel.comReviewed-by: NJani Nikula <jani.nikula@intel.com>
Acked-by: NEric Anholt <eric@anholt.net>

Make the code selecting the RGB quantization range a little less magicy
by wrapping it up in a small helper.

v2: s/adjusted_mode/mode in vc4 to make it actually compile
v3: Add a comment proposed by Eric
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170111141835.25369-1-ville.syrjala@linux.intel.comReviewed-by: NJani Nikula <jani.nikula@intel.com>
Acked-by: NEric Anholt <eric@anholt.net>

No reason not to be const.
Reviewed-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1482923186-22430-1-git-send-email-jani.nikula@intel.com

<drm/drm_crtc.h> used to define most of the in-kernel KMS API. It has
now been split into separate files for each object type, but still
includes most other KMS headers to avoid breaking driver compilation.

As a step towards fixing that problem, remove the inclusion of
<drm/drm_encoder.h> from <drm/drm_crtc.h> and include it instead where
appropriate. Also remove the forward declarations of the drm_encoder and
drm_encoder_helper_funcs structures from <drm/drm_crtc.h> as they're not
needed in the header.

<drm/drm_encoder.h> now has to include <drm/drm_mode.h> and contain a
forward declaration of struct drm_encoder in order to allow including it
as the first header in a compilation unit.
Signed-off-by: NLaurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Sinclair Yeh <syeh@vmware.com> # For vmwgfx
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NArchit Taneja <architt@codeaurora.org>
Link: http://patchwork.freedesktop.org/patch/msgid/1481709550-29226-2-git-send-email-laurent.pinchart+renesas@ideasonboard.com

CEA-861 specifies that the vertical front porch may vary by one or two
lines for specific VICs. Up to now we've only considered a mode to match
the VIC if it matched the shortest possible vertical front porch length
(as that is the variant we store in cea_modes[]). Let's allow our VIC
matching to work with the other timings variants as well so that that
we'll send out the correct VIC if the variant actually used isn't the
one with the shortest vertical front porch.

Cc: Shashank Sharma <shashank.sharma@intel.com>
Cc: Andrzej Hajda <a.hajda@samsung.com>
Cc: Adam Jackson <ajax@redhat.com>
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1478177609-16762-2-git-send-email-ville.syrjala@linux.intel.comReviewed-by: NAndrzej Hajda <a.hajda@samsung.com>

The only user was i915, which is now gone.
Signed-off-by: NMaarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Acked-by: Dave Airlie <airlied@redhat.com> #irc
Cc: dri-devel@lists.freedesktop.org
Link: http://patchwork.freedesktop.org/patch/msgid/1478609742-13603-9-git-send-email-maarten.lankhorst@linux.intel.com

All the VICs apart from 58 and 59 have the word "Hz" included in the
comment. Include it for 59 and 59 as well.

Cc: Shashank Sharma <shashank.sharma@intel.com>
Cc: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: NAndrzej Hajda <a.hajda@samsung.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1478177609-16762-1-git-send-email-ville.syrjala@linux.intel.com

Currently, if drm.debug is enabled, we get a DRM_ERROR message on the
intermediate edid reads. This causes transient failures in CI which
flags up the sporadic EDID read failures, which are recovered by
rereading the EDID automatically. This patch combines the reporting done
by drm_do_get_edid() itself with the bad block printing from
get_edid_block(), into a single warning associated with the connector
once all attempts to retrieve the EDID fail.

v2: Print the whole EDID, marking up the bad/zero blocks. This requires
recording the whole of the raw edid, then a second pass to reduce it to
the valid extensions.
v3: Fix invalid/valid extension fumble.

References: https://bugs.freedesktop.org/show_bug.cgi?id=98228Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: NSean Paul <seanpaul@chromium.org>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20161024113821.26263-1-chris@chris-wilson.co.uk

Now that we have the name "block" free once more, we can use it to point
to the start of a block within the edid.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20161017083514.21772-2-chris@chris-wilson.co.uk

The "block" variable points to the entire edid, not individual blocks
despite it being named such.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20161017083514.21772-1-chris@chris-wilson.co.uk

drm_edid_to_eld() is just mean to cook up the ELD for the audio driver,
so having it parse non-audio related stuff seems just wrong, and
potentially could lead to that information not being even filled out
if the function doesn't even get called. Let's move that stuff to the
place where we parse the color formats and whatnot from the CEA ext
block.
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Acked-by: NChristian König <christian.koenig@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1475070703-6435-9-git-send-email-ville.syrjala@linux.intel.com