This commit reverts commit 7afbddfa ("IB/core: Temporarily disable
create_flow/destroy_flow uverbs").  Since the uverbs extensions
functionality was experimental for v3.12, this patch re-enables the
support for them and flow-steering for v3.13.
Signed-off-by: NMatan Barak <matanb@mellanox.com>
Signed-off-by: NRoland Dreier <roland@purestorage.com>

Commit 400dbc96 ("IB/core: Infrastructure for extensible uverbs
commands") added an infrastructure for extensible uverbs commands
while later commit 436f2ad0 ("IB/core: Export ib_create/destroy_flow
through uverbs") exported ib_create_flow()/ib_destroy_flow() functions
using this new infrastructure.

According to the commit 400dbc96, the purpose of this
infrastructure is to support passing around provider (eg. hardware)
specific buffers when userspace issue commands to the kernel, so that
it would be possible to extend uverbs (eg. core) buffers independently
from the provider buffers.

But the new kernel command function prototypes were not modified to
take advantage of this extension. This issue was exposed by Roland
Dreier in a previous review[1].

So the following patch is an attempt to a revised extensible command
infrastructure.

This improved extensible command infrastructure distinguish between
core (eg. legacy)'s command/response buffers from provider
(eg. hardware)'s command/response buffers: each extended command
implementing function is given a struct ib_udata to hold core
(eg. uverbs) input and output buffers, and another struct ib_udata to
hold the hw (eg. provider) input and output buffers.

Having those buffers identified separately make it easier to increase
one buffer to support extension without having to add some code to
guess the exact size of each command/response parts: This should make
the extended functions more reliable.

Additionally, instead of relying on command identifier being greater
than IB_USER_VERBS_CMD_THRESHOLD, the proposed infrastructure rely on
unused bits in command field: on the 32 bits provided by command
field, only 6 bits are really needed to encode the identifier of
commands currently supported by the kernel. (Even using only 6 bits
leaves room for about 23 new commands).

So this patch makes use of some high order bits in command field to
store flags, leaving enough room for more command identifiers than one
will ever need (eg. 256).

The new flags are used to specify if the command should be processed
as an extended one or a legacy one. While designing the new command
format, care was taken to make usage of flags itself extensible.

Using high order bits of the commands field ensure that newer
libibverbs on older kernel will properly fail when trying to call
extended commands. On the other hand, older libibverbs on newer kernel
will never be able to issue calls to extended commands.

The extended command header includes the optional response pointer so
that output buffer length and output buffer pointer are located
together in the command, allowing proper parameters checking. This
should make implementing functions easier and safer.

Additionally the extended header ensure 64bits alignment, while making
all sizes multiple of 8 bytes, extending the maximum buffer size:

                             legacy      extended

   Maximum command buffer:  256KBytes   1024KBytes (512KBytes + 512KBytes)
  Maximum response buffer:  256KBytes   1024KBytes (512KBytes + 512KBytes)

For the purpose of doing proper buffer size accounting, the headers
size are no more taken in account in "in_words".

One of the odds of the current extensible infrastructure, reading
twice the "legacy" command header, is fixed by removing the "legacy"
command header from the extended command header: they are processed as
two different parts of the command: memory is read once and
information are not duplicated: it's making clear that's an extended
command scheme and not a different command scheme.

The proposed scheme will format input (command) and output (response)
buffers this way:

- command:

  legacy header +
  extended header +
  command data (core + hw):

    +----------------------------------------+
    | flags     |   00      00    |  command |
    |        in_words    |   out_words       |
    +----------------------------------------+
    |                 response               |
    |                 response               |
    | provider_in_words | provider_out_words |
    |                 padding                |
    +----------------------------------------+
    |                                        |
    .              <uverbs input>            .
    .              (in_words * 8)            .
    |                                        |
    +----------------------------------------+
    |                                        |
    .             <provider input>           .
    .          (provider_in_words * 8)       .
    |                                        |
    +----------------------------------------+

- response, if present:

    +----------------------------------------+
    |                                        |
    .          <uverbs output space>         .
    .             (out_words * 8)            .
    |                                        |
    +----------------------------------------+
    |                                        |
    .         <provider output space>        .
    .         (provider_out_words * 8)       .
    |                                        |
    +----------------------------------------+

The overall design is to ensure that the extensible infrastructure is
itself extensible while begin more reliable with more input and bound
checking.

Note:

The unused field in the extended header would be perfect candidate to
hold the command "comp_mask" (eg. bit field used to handle
compatibility).  This was suggested by Roland Dreier in a previous
review[2].  But "comp_mask" field is likely to be present in the uverb
input and/or provider input, likewise for the response, as noted by
Matan Barak[3], so it doesn't make sense to put "comp_mask" in the
header.

[1]:
http://marc.info/?i=CAL1RGDWxmM17W2o_era24A-TTDeKyoL6u3NRu_=t_dhV_ZA9MA@mail.gmail.com

[2]:
http://marc.info/?i=CAL1RGDXJtrc849M6_XNZT5xO1+ybKtLWGq6yg6LhoSsKpsmkYA@mail.gmail.com

[3]:
http://marc.info/?i=525C1149.6000701@mellanox.comSigned-off-by: NYann Droneaud <ydroneaud@opteya.com>
Link: http://marc.info/?i=cover.1383773832.git.ydroneaud@opteya.com

[ Convert "ret ? ret : 0" to the equivalent "ret".  - Roland ]
Signed-off-by: NRoland Dreier <roland@purestorage.com>

The structure holding any types of flow_spec is of no use to
userspace.  It would be wrong for userspace to do:

  struct ib_uverbs_flow_spec flow_spec;

  flow_spec.type = IB_FLOW_SPEC_TCP;
  flow_spec.size = sizeof(flow_spec);

Instead, userspace should use the dedicated flow_spec structure for
  - Ethernet : struct ib_uverbs_flow_spec_eth,
  - IPv4     : struct ib_uverbs_flow_spec_ipv4,
  - TCP/UDP  : struct ib_uverbs_flow_spec_tcp_udp.

In other words, struct ib_uverbs_flow_spec is a "virtual" data
structure that can only be use by the kernel as an alias to the other.
Signed-off-by: NYann Droneaud <ydroneaud@opteya.com>
Link: http://marc.info/?i=cover.1383773832.git.ydroneaud@opteya.comSigned-off-by: NRoland Dreier <roland@purestorage.com>

A common header will allows better checking of flow specs size, while
ensuring strict alignment to 64 bits.
Signed-off-by: NYann Droneaud <ydroneaud@opteya.com>
Link: http://marc.info/?i=cover.1383773832.git.ydroneaud@opteya.comSigned-off-by: NRoland Dreier <roland@purestorage.com>

This patch adds "flow" prefix to most of data structure added as part
of commit 436f2ad0 ("IB/core: Export ib_create/destroy_flow through
uverbs") to keep those names in sync with the data structures added in
commit 319a441d ("IB/core: Add receive flow steering support").

It's just a matter of translating 'ib_flow' to 'ib_uverbs_flow'.
Signed-off-by: NYann Droneaud <ydroneaud@opteya.com>
Link: http://marc.info/?i=cover.1383773832.git.ydroneaud@opteya.comSigned-off-by: NRoland Dreier <roland@purestorage.com>

Commit 436f2ad0 ("IB/core: Export ib_create/destroy_flow through
uverbs") added public data structures to support receive flow
steering.  The new structs are not following the 'uverbs' pattern:
they're lacking the common prefix 'ib_uverbs'.

This patch replaces ib_kern prefix by ib_uverbs.
Signed-off-by: NYann Droneaud <ydroneaud@opteya.com>
Link: http://marc.info/?i=cover.1383773832.git.ydroneaud@opteya.comSigned-off-by: NRoland Dreier <roland@purestorage.com>

This patch fixes the following issues:

1. Unneeded checks were removed

2. Removed the fixed size out of flow_attr.size, thus simplifying the checks.

3. Remove a 32bit hole on 64bit systems with strict alignment in
   struct ib_kern_flow_att by adding a reserved field.
Signed-off-by: NMatan Barak <matanb@mellanox.com>
Signed-off-by: NRoland Dreier <roland@purestorage.com>

Pull parisc fix from Helge Deller:
 "This is a 2-line patch to save the CPU register which holds our task
  thread info pointer before calling a firmware function and then to
  restore it again afterwards.

  This is necessary because on some 64bit machines the high-order 32bits
  are being clobbered by the firmware call, and thus we failed to bring
  up secondary CPUs (and instead crashed the kernel) in some situations
  eg if we had more than 4GB RAM.  This patch fixes a bug which has been
  since ever in the parisc linux kernel and which prevented some people
  to use a 64bit kernel"

* 'parisc-3.12' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
  parisc: Do not crash 64bit SMP kernels on machines with >= 4GB RAM

Pull timer fix from Ingo Molnar:
 "This tree contains a clockevents regression fix for certain ARM
  subarchitectures"

* 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  clockevents: Sanitize ticks to nsec conversion

Pull perf fixes from Ingo Molnar:
 "The tree contains three fixes:

   - Two tooling fixes

   - Reversal of the new 'MMAP2' extended mmap record ABI, introduced in
     this merge window.  (Patches were proposed to fix it but it was all
     a bit late and we felt it's safer to just delay the ABI one more
     kernel release and do it right)"

* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  perf: Disable PERF_RECORD_MMAP2 support
  perf scripting perl: Fix build error on Fedora 12
  perf probe: Fix to initialize fname always before use it

Pull locking fix from Ingo Molnar:
 "This tree fixes a boot crash in CONFIG_DEBUG_MUTEXES=y kernels, on
  kernels built with GCC 3.x (there are still such distros)"

Side note: it's not just a fix for old gcc versions, it's also removing
an incredibly broken/subtle check that LLVM had issues with, and that
made no sense.

* 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  mutex: Avoid gcc version dependent __builtin_constant_p() usage

Pull SCSI target fixes from Nicholas Bellinger:
 "Here are the outstanding target pending fixes for v3.12-rc7.

  This includes a number of EXTENDED_COPY related fixes as a result of
  Thomas and Doug's continuing testing and feedback.

  Also included is an important vhost/scsi fix that addresses a long
  standing issue where the 'write' parameter for get_user_pages_fast()
  was incorrectly set for virtio-scsi WRITEs -> DMA_TO_DEVICE, and not
  for virtio-scsi READs -> DMA_FROM_DEVICE.

  This resulted in random userspace segfaults and other unpleasantness
  on KVM host, and unfortunately has been an issue since the initial
  merge of vhost/scsi in v3.6.  This patch is CC'ed to stable, along
  with two other less critical items"

* git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending:
  vhost/scsi: Fix incorrect usage of get_user_pages_fast write parameter
  target/pscsi: fix return value check
  target: Fail XCOPY for non matching source + destination block_size
  target: Generate failure for XCOPY I/O with non-zero scsi_status
  target: Add missing XCOPY I/O operation sense_buffer
  iser-target: check device before dereferencing its variable
  target: Return an error for WRITE SAME with ANCHOR==1
  target: Fix assignment of LUN in tracepoints
  target: Reject EXTENDED_COPY when emulate_3pc is disabled
  target: Allow non zero ListID in EXTENDED_COPY parameter list
  target: Make target_do_xcopy failures return INVALID_PARAMETER_LIST

Pull slave-dmaengine fixes from Vinod Koul:
 "Here is the late fixes pull request for dmaengine while you fly back
  from KS.

  We have a new dmaengine ML hosted by vger so a patch for that along
  with addition of Dave as driver mainatainer for ioat.  Other fixes are
  memeory leak fixes on edma driver, small fixes on rcar-hpbdma driver
  by Sergei"

* 'fixes' of git://git.infradead.org/users/vkoul/slave-dma:
  dmaengine: edma: fix another memory leak
  dma: edma: Fix memory leak
  MAINTAINERS: add to ioatdma maintainer list
  MAINTAINERS: add the new dmaengine mailing list

Since the beginning of the parisc-linux port, sometimes 64bit SMP kernels were
not able to bring up other CPUs than the monarch CPU and instead crashed the
kernel.  The reason was unclear, esp. since it involved various machines (e.g.
J5600, J6750 and SuperDome). Testing showed, that those crashes didn't happened
when less than 4GB were installed, or if a 32bit Linux kernel was booted.

In the end, the fix for those SMP problems is trivial:
During the early phase of the initialization of the CPUs, including the monarch
CPU, the PDC_PSW firmware function to enable WIDE (=64bit) mode is called.
It's documented that this firmware function may clobber various registers, and
one one of those possibly clobbered registers is %cr30 which holds the task
thread info pointer.

Now, if %cr30 would always have been clobbered, then this bug would have been
detected much earlier. But lots of testing finally showed, that - at least for
%cr30 - on some machines only the upper 32bits of the 64bit register suddenly
turned zero after the firmware call.

So, after finding the root cause, the explanation for the various crashes
became clear:
- On 32bit SMP Linux kernels all upper 32bit were zero, so we didn't faced this
  problem.
- Monarch CPUs in 64bit mode always booted sucessfully, because the inital task
  thread info pointer was below 4GB.
- Secondary CPUs booted sucessfully on machines with less than 4GB RAM because
  the upper 32bit were zero anyay.
- Secondary CPus failed to boot if we had more than 4GB RAM and the task thread
  info pointer was located above the 4GB boundary.

Finally, the patch to fix this problem is trivial by saving the %cr30 register
before the firmware call and restoring it afterwards.
Signed-off-by: NHelge Deller <deller@gmx.de>
Signed-off-by: NJohn David Anglin <dave.anglin@bell.net>
Cc: <stable@vger.kernel.org> # 2.6.12+
Signed-off-by: NHelge Deller <deller@gmx.de>

Pull ACPI and power management fixes from
 "These fix two bugs in the intel_pstate driver, a hibernate bug leading
  to nasty resume failures sometimes and acpi-cpufreq initialization bug
  that causes problems to happen during module unload when intel_pstate
  is in use.

  Specifics:

   - Fix for rounding errors in intel_pstate causing CPU utilization to
     be underestimated from Brennan Shacklett.

   - intel_pstate fix to always use the correct max pstate value when
     computing the min pstate from Dirk Brandewie.

   - Hibernation fix for deadlocking resume in cases when the probing of
     the device containing the image is deferred from Russ Dill.

   - acpi-cpufreq fix to prevent the module from staying in memory when
     the driver cannot be registered and then attempting to unregister
     things that have never been registered on exit"

* tag 'pm+acpi-3.12-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  acpi-cpufreq: Fail initialization if driver cannot be registered
  PM / hibernate: Move software_resume to late_initcall_sync
  intel_pstate: Correct calculation of min pstate value
  intel_pstate: Improve accuracy by not truncating until final result

Pull final mtd fixes from Brian Norris:
 "A few more last-minute regression fixes, prepared jointly by me and
  David Woodhouse:

   - Revert pxa3xx to its old name to avoid breaking existing
     'mtdparts=' boot strings.

   - Return GPMI NAND to its legacy ECC layout for backwards
     compatibility.  We will revisit this in 3.13.

  A note from David on the latter fix: 'This leaves a harmless cosmetic
  warning about an unused function.  At this point in the cycle I really
  don't care.'"

* tag 'for-linus-20131025' of git://git.infradead.org/linux-mtd:
  mtd: gpmi: fix ECC regression
  mtd: nand: pxa3xx: Fix registered MTD name

This patch addresses a long-standing bug where the get_user_pages_fast()
write parameter used for setting the underlying page table entry permission
bits was incorrectly set to write=1 for data_direction=DMA_TO_DEVICE, and
passed into get_user_pages_fast() via vhost_scsi_map_iov_to_sgl().

However, this parameter is intended to signal WRITEs to pinned userspace
PTEs for the virtio-scsi DMA_FROM_DEVICE -> READ payload case, and *not*
for the virtio-scsi DMA_TO_DEVICE -> WRITE payload case.

This bug would manifest itself as random process segmentation faults on
KVM host after repeated vhost starts + stops and/or with lots of vhost
endpoints + LUNs.

Cc: Stefan Hajnoczi <stefanha@redhat.com>
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: Asias He <asias@redhat.com>
Cc: <stable@vger.kernel.org> # 3.6+
Signed-off-by: NNicholas Bellinger <nab@linux-iscsi.org>

In case of error, the function scsi_host_lookup() returns NULL
pointer not ERR_PTR(). The IS_ERR() test in the return value check
should be replaced with NULL test.
Signed-off-by: NWei Yongjun <yongjun_wei@trendmicro.com.cn>
Cc: <stable@vger.kernel.org>
Signed-off-by: NNicholas Bellinger <nab@linux-iscsi.org>

Pull vfs fixes (try two) from Al Viro:
 "nfsd performance regression fix + seq_file lseek(2) fix"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  seq_file: always update file->f_pos in seq_lseek()
  nfsd regression since delayed fput()

The "legacy" ECC layout used until 3.12-rc1 uses all the OOB area by
computing the ECC strength and ECC step size ourselves.

Commit 2febcdf8 ("mtd: gpmi: set the BCHs geometry with the ecc info")
makes the driver use the ECC info (ECC strength and ECC step size)
provided by the MTD code, and creates a different NAND ECC layout
for the BCH, and use the new ECC layout. This causes a regression:

   We can not mount the ubifs which was created by the old NAND ECC layout.

This patch fixes this issue by reverting to the legacy ECC layout.

We will probably introduce a new device-tree property to indicate that
the new ECC layout can be used. For now though, for the imminent 3.12
release, we just unconditionally revert to the 3.11 behaviour.

This leaves a harmless cosmetic warning about an unused function. At
this point in the cycle I really don't care.
Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com>
Signed-off-by: NBrian Norris <computersforpeace@gmail.com>
Acked-by: NHuang Shijie <b32955@freescale.com>
Acked-by: NMarek Vasut <marex@denx.de>
Tested-by: NMarek Vasut <marex@denx.de>

This issue was first pointed out by Jiaxing Wang several months ago, but no
further comments:
https://lkml.org/lkml/2013/6/29/41

As we know pread() does not change f_pos, so after pread(), file->f_pos
and m->read_pos become different. And seq_lseek() does not update file->f_pos
if offset equals to m->read_pos, so after pread() and seq_lseek()(lseek to
m->read_pos), then a subsequent read may read from a wrong position, the
following program produces the problem:

    char str1[32] = { 0 };
    char str2[32] = { 0 };
    int poffset = 10;
    int count = 20;

    /*open any seq file*/
    int fd = open("/proc/modules", O_RDONLY);

    pread(fd, str1, count, poffset);
    printf("pread:%s\n", str1);

    /*seek to where m->read_pos is*/
    lseek(fd, poffset+count, SEEK_SET);

    /*supposed to read from poffset+count, but this read from position 0*/
    read(fd, str2, count);
    printf("read:%s\n", str2);

out put:
pread:
 ck_netbios_ns 12665
read:
 nf_conntrack_netbios

/proc/modules:
nf_conntrack_netbios_ns 12665 0 - Live 0xffffffffa038b000
nf_conntrack_broadcast 12589 1 nf_conntrack_netbios_ns, Live 0xffffffffa0386000

So we always update file->f_pos to offset in seq_lseek() to fix this issue.
Signed-off-by: NJiaxing Wang <hello.wjx@gmail.com>
Signed-off-by: NGu Zheng <guz.fnst@cn.fujitsu.com>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Make acpi_cpufreq_init() return error codes when the driver cannot be
registered so that the module doesn't stay useless in memory and so
that acpi_cpufreq_exit() doesn't attempt to unregister things that
have never been registered when the module is unloaded.
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: NViresh Kumar <viresh.kumar@linaro.org>

Pull ARM SoC fixes from Olof Johansson:
 "There's really only one bugfix in this branch, which is a fix for
  timers on the integrator platform.  Since Linus Walleij is
  resurrecting support for the platform it seems valuable to get the fix
  into 3.12 even though the regression has been around a while.

  The rest are a handful of maintainers updates.  If you prefer to hold
  those until 3.13 then just merge the first patch on the branch which
  is the fix"

* tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
  MAINTAINERS: Add maintainers entry for Rockchip SoCs
  MAINTAINERS: Tegra updates, and driver ownership
  MAINTAINERS: ARM: mvebu: add Sebastian Hesselbarth
  ARM: integrator: deactivate timer0 on the Integrator/CP

Merge tag 'ecryptfs-3.12-rc7-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tyhicks/ecryptfs

Pull ecryptfs fixes from Tyler Hicks:
 "Two important fixes
   - Fix long standing memory leak in the (rarely used) public key
     support
   - Fix large file corruption on 32 bit architectures"

* tag 'ecryptfs-3.12-rc7-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tyhicks/ecryptfs:
  eCryptfs: fix 32 bit corruption issue
  ecryptfs: Fix memory leakage in keystore.c

software_resume is being called after deferred_probe_initcall in
drivers base. If the probing of the device that contains the resume
image is deferred, and the system has been instructed to wait for
it to show up, this wait will occur in software_resume. This causes
a deadlock.

Move software_resume into late_initcall_sync so that it happens
after all the other late_initcalls.
Signed-off-by: NRuss Dill <Russ.Dill@ti.com>
Acked-by: NPavel Machek <Pavel@ucw.cz>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

In a recent commit:

  commit f455578d
  Author: Ezequiel Garcia <ezequiel.garcia@free-electrons.com>
  Date:   Mon Aug 12 14:14:53 2013 -0300

  mtd: nand: pxa3xx: Remove hardcoded mtd name

  There's no advantage in using a hardcoded name for the mtd device.
  Instead use the provided by the platform_device.

The MTD name was changed to use the one provided by the platform_device.
However, this can be problematic as some users want to set partitions
using the kernel parameter 'mtdparts', where the name is needed.

Therefore, to avoid regressions in users relying in 'mtdparts' we revert
the change and use the previous one 'pxa3xx_nand-0'.

While at it, let's put a big comment and prevent this change from happening
ever again.
Signed-off-by: NEzequiel Garcia <ezequiel.garcia@free-electrons.com>
Signed-off-by: NBrian Norris <computersforpeace@gmail.com>

Shifting page->index on 32 bit systems was overflowing, causing
data corruption of > 4GB files. Fix this by casting it first.

https://launchpad.net/bugs/1243636Signed-off-by: NColin Ian King <colin.king@canonical.com>
Reported-by: NLars Duesing <lars.duesing@camelotsweb.de>
Cc: stable@vger.kernel.org # v3.11+
Signed-off-by: NTyler Hicks <tyhicks@canonical.com>

commit 4b6271a6 fix a menory leak but one more existed in driver so fix that
Signed-off-by: NVinod Koul <vinod.koul@intel.com>

When it fails to allocate a slot, edesc should be free'd before return;
Signed-off-by: NValentin Ilie <valentin.ilie@gmail.com>
Signed-off-by: NVinod Koul <vinod.koul@intel.com>

This patch adds an explicit check + failure for XCOPY I/O to source +
destination devices with a non-matching block_size.

This limitiation is currently due to the fact that the scatterlist
memory allocated for the XCOPY READ operation is passed zero-copy
to the XCOPY WRITE operation.
Reported-by: NThomas Glanzmann <thomas@glanzmann.de>
Reported-by: NDouglas Gilbert <dgilbert@interlog.com>
Cc: Thomas Glanzmann <thomas@glanzmann.de>
Cc: Douglas Gilbert <dgilbert@interlog.com>
Signed-off-by: NNicholas Bellinger <nab@linux-iscsi.org>

This patch adds the missing non-zero se_cmd->scsi_status check required
for local XCOPY I/O within target_xcopy_issue_pt_cmd() to signal an
exception case failure.

This will trigger the generation of SAM_STAT_CHECK_CONDITION status
from within target_xcopy_do_work() process context code.
Reported-by: NThomas Glanzmann <thomas@glanzmann.de>
Reported-by: NDouglas Gilbert <dgilbert@interlog.com>
Cc: Thomas Glanzmann <thomas@glanzmann.de>
Cc: Douglas Gilbert <dgilbert@interlog.com>
Signed-off-by: NNicholas Bellinger <nab@linux-iscsi.org>

This patch adds the missing xcopy_pt_cmd->sense_buffer[] required for
correctly handling CHECK_CONDITION exceptions within the locally
generated XCOPY I/O path.

Also update target_xcopy_read_source() + target_xcopy_setup_pt_cmd()
to pass this buffer into transport_init_se_cmd() to correctly setup
se_cmd->sense_buffer.
Reported-by: NThomas Glanzmann <thomas@glanzmann.de>
Reported-by: NDouglas Gilbert <dgilbert@interlog.com>
Cc: Thomas Glanzmann <thomas@glanzmann.de>
Cc: Douglas Gilbert <dgilbert@interlog.com>
Signed-off-by: NNicholas Bellinger <nab@linux-iscsi.org>

Pull md bugfixes from Neil Brown:
 "Assorted md bug-fixes for 3.12.

  All tagged for -stable releases too"

* tag 'md/3.12-fixes' of git://neil.brown.name/md:
  raid5: avoid finding "discard" stripe
  raid5: set bio bi_vcnt 0 for discard request
  md: avoid deadlock when md_set_badblocks.
  md: Fix skipping recovery for read-only arrays.

Pull SCSI fixes from James Bottomley:
 "This is a set of two fixes which cause oopses (Buslogic, qla2xxx) and
 one fix which may cause a hang because of request miscounting (sd)"

* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  [SCSI] sd: call blk_pm_runtime_init before add_disk
  [SCSI] qla2xxx: Fix request queue null dereference.
  [SCSI] BusLogic: Fix an oops when intializing multimaster adapter

This patch changes isert_connect_release() to correctly check for
the existence struct isert_device *device before checking for
isert_device->use_frwr.
Signed-off-by: NVu Pham <vu@mellanox.com>
Signed-off-by: NNicholas Bellinger <nab@linux-iscsi.org>

SCSI discard will damage discard stripe bio setting, eg, some fields are
changed. If the stripe is reused very soon, we have wrong bios setting. We
remove discard stripe from hash list, so next time the strip will be fully
initialized.

Suitable for backport to 3.7+.

Cc: <stable@vger.kernel.org> (3.7+)
Signed-off-by: NShaohua Li <shli@fusionio.com>
Signed-off-by: NNeilBrown <neilb@suse.de>

SCSI layer will add new payload for discard request. If two bios are merged
to one, the second bio has bi_vcnt 1 which is set in raid5. This will confuse
SCSI and cause oops.

Suitable for backport to 3.7+

Cc: stable@vger.kernel.org (v3.7+)
Reported-by: NJes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: NShaohua Li <shli@fusionio.com>
Signed-off-by: NNeilBrown <neilb@suse.de>
Acked-by: NMartin K. Petersen <martin.petersen@oracle.com>

When operate harddisk and hit errors, md_set_badblocks is called after
scsi_restart_operations which already disabled the irq. but md_set_badblocks
will call write_sequnlock_irq and enable irq. so softirq can preempt the
current thread and that may cause a deadlock. I think this situation should
use write_sequnlock_irqsave/irqrestore instead.

I met the situation and the call trace is below:
[  638.919974] BUG: spinlock recursion on CPU#0, scsi_eh_13/1010
[  638.921923]  lock: 0xffff8800d4d51fc8, .magic: dead4ead, .owner: scsi_eh_13/1010, .owner_cpu: 0
[  638.923890] CPU: 0 PID: 1010 Comm: scsi_eh_13 Not tainted 3.12.0-rc5+ #37
[  638.925844] Hardware name: To be filled by O.E.M. To be filled by O.E.M./MAHOBAY, BIOS 4.6.5 03/05/2013
[  638.927816]  ffff880037ad4640 ffff880118c03d50 ffffffff8172ff85 0000000000000007
[  638.929829]  ffff8800d4d51fc8 ffff880118c03d70 ffffffff81730030 ffff8800d4d51fc8
[  638.931848]  ffffffff81a72eb0 ffff880118c03d90 ffffffff81730056 ffff8800d4d51fc8
[  638.933884] Call Trace:
[  638.935867]  <IRQ>  [<ffffffff8172ff85>] dump_stack+0x55/0x76
[  638.937878]  [<ffffffff81730030>] spin_dump+0x8a/0x8f
[  638.939861]  [<ffffffff81730056>] spin_bug+0x21/0x26
[  638.941836]  [<ffffffff81336de4>] do_raw_spin_lock+0xa4/0xc0
[  638.943801]  [<ffffffff8173f036>] _raw_spin_lock+0x66/0x80
[  638.945747]  [<ffffffff814a73ed>] ? scsi_device_unbusy+0x9d/0xd0
[  638.947672]  [<ffffffff8173fb1b>] ? _raw_spin_unlock+0x2b/0x50
[  638.949595]  [<ffffffff814a73ed>] scsi_device_unbusy+0x9d/0xd0
[  638.951504]  [<ffffffff8149ec47>] scsi_finish_command+0x37/0xe0
[  638.953388]  [<ffffffff814a75e8>] scsi_softirq_done+0xa8/0x140
[  638.955248]  [<ffffffff8130e32b>] blk_done_softirq+0x7b/0x90
[  638.957116]  [<ffffffff8104fddd>] __do_softirq+0xfd/0x330
[  638.958987]  [<ffffffff810b964f>] ? __lock_release+0x6f/0x100
[  638.960861]  [<ffffffff8174a5cc>] call_softirq+0x1c/0x30
[  638.962724]  [<ffffffff81004c7d>] do_softirq+0x8d/0xc0
[  638.964565]  [<ffffffff8105024e>] irq_exit+0x10e/0x150
[  638.966390]  [<ffffffff8174ad4a>] smp_apic_timer_interrupt+0x4a/0x60
[  638.968223]  [<ffffffff817499af>] apic_timer_interrupt+0x6f/0x80
[  638.970079]  <EOI>  [<ffffffff810b964f>] ? __lock_release+0x6f/0x100
[  638.971899]  [<ffffffff8173fa6a>] ? _raw_spin_unlock_irq+0x3a/0x50
[  638.973691]  [<ffffffff8173fa60>] ? _raw_spin_unlock_irq+0x30/0x50
[  638.975475]  [<ffffffff81562393>] md_set_badblocks+0x1f3/0x4a0
[  638.977243]  [<ffffffff81566e07>] rdev_set_badblocks+0x27/0x80
[  638.978988]  [<ffffffffa00d97bb>] raid5_end_read_request+0x36b/0x4e0 [raid456]
[  638.980723]  [<ffffffff811b5a1d>] bio_endio+0x1d/0x40
[  638.982463]  [<ffffffff81304ff3>] req_bio_endio.isra.65+0x83/0xa0
[  638.984214]  [<ffffffff81306b9f>] blk_update_request+0x7f/0x350
[  638.985967]  [<ffffffff81306ea1>] blk_update_bidi_request+0x31/0x90
[  638.987710]  [<ffffffff813085e0>] __blk_end_bidi_request+0x20/0x50
[  638.989439]  [<ffffffff8130862f>] __blk_end_request_all+0x1f/0x30
[  638.991149]  [<ffffffff81308746>] blk_peek_request+0x106/0x250
[  638.992861]  [<ffffffff814a62a9>] ? scsi_kill_request.isra.32+0xe9/0x130
[  638.994561]  [<ffffffff814a633a>] scsi_request_fn+0x4a/0x3d0
[  638.996251]  [<ffffffff813040a7>] __blk_run_queue+0x37/0x50
[  638.997900]  [<ffffffff813045af>] blk_run_queue+0x2f/0x50
[  638.999553]  [<ffffffff814a5750>] scsi_run_queue+0xe0/0x1c0
[  639.001185]  [<ffffffff814a7721>] scsi_run_host_queues+0x21/0x40
[  639.002798]  [<ffffffff814a2e87>] scsi_restart_operations+0x177/0x200
[  639.004391]  [<ffffffff814a4fe9>] scsi_error_handler+0xc9/0xe0
[  639.005996]  [<ffffffff814a4f20>] ? scsi_unjam_host+0xd0/0xd0
[  639.007600]  [<ffffffff81072f6b>] kthread+0xdb/0xe0
[  639.009205]  [<ffffffff81072e90>] ? flush_kthread_worker+0x170/0x170
[  639.010821]  [<ffffffff81748cac>] ret_from_fork+0x7c/0xb0
[  639.012437]  [<ffffffff81072e90>] ? flush_kthread_worker+0x170/0x170

This bug was introduce in commit  2e8ac303
(the first time rdev_set_badblock was call from interrupt context),
so this patch is appropriate for 3.5 and subsequent kernels.

Cc: <stable@vger.kernel.org> (3.5+)
Signed-off-by: NBian Yu <bianyu@kedacom.com>
Reviewed-by: NJianpeng Ma <majianpeng@gmail.com>
Signed-off-by: NNeilBrown <neilb@suse.de>

Since:
        commit 7ceb17e8
        md: Allow devices to be re-added to a read-only array.

spares are activated on a read-only array. In case of raid1 and raid10
personalities it causes that not-in-sync devices are marked in-sync
without checking if recovery has been finished.

If a read-only array is degraded and one of its devices is not in-sync
(because the array has been only partially recovered) recovery will be skipped.

This patch adds checking if recovery has been finished before marking a device
in-sync for raid1 and raid10 personalities. In case of raid5 personality
such condition is already present (at raid5.c:6029).

Bug was introduced in 3.10 and causes data corruption.

Cc: stable@vger.kernel.org
Signed-off-by: NPawel Baldysiak <pawel.baldysiak@intel.com>
Signed-off-by: NLukasz Dorau <lukasz.dorau@intel.com>
Signed-off-by: NNeilBrown <neilb@suse.de>