I accidentally added the compliance test hacks only to
intel_dp_hotplug() which doesn't even get used on any DDI
platform. Put the same crap into intel_ddi_hotplug().

Cc: Imre Deak <imre.deak@intel.com>
Fixes: 193af12c ("drm/i915: Shove the PHY test into the hotplug work")
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210114205046.8247-7-ville.syrjala@linux.intel.comReviewed-by: NImre Deak <imre.deak@intel.com>

Currently we claim to use TPS7 when using TPS4. That is just
confusing, so let's fix the debug print.

And while we're touching this let's add the customary
encoder id/name as well.

v2: Add MISSING_CASE() (Manasi)
Reviewed-by: NManasi Navare <manasi.d.navare@intel.com>
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210114205046.8247-2-ville.syrjala@linux.intel.com

Let's not enable the 4:4:4->4:2:0 conversion bit in the DFP unless we're
actually outputting YCbCr 4:4:4. It would appear some protocol
converters blindy consult this bit even when the source is outputting
RGB, resulting in a visual mess.

Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/2914Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210111164111.13302-1-ville.syrjala@linux.intel.com
Fixes: 181567aa ("drm/i915: Do YCbCr 444->420 conversion via DP protocol converters")
Reviewed-by: NJani Nikula <jani.nikula@intel.com>

drivers/gpu/drm/i915/display/intel_dp.c:6922 intel_dp_update_420() warn: should this be a bitwise op?
drivers/gpu/drm/i915/display/intel_dp.c:6922 intel_dp_update_420() warn: should this be a bitwise op?
drivers/gpu/drm/i915/display/intel_dp.c:6923 intel_dp_update_420() warn: should this be a bitwise op?

Inside drm_dp_downstream_rgb_to_ycbcr_conversion(), that parameter
'color_spc' is used as return port_cap[3] & color_spc, implying that it
is indeed a mask and not a boolean value.

Fixes: 522508b6 ("drm/i915/display: Let PCON convert from RGB to YCbCr if it can")
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Uma Shankar <uma.shankar@intel.com>
Cc: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: NJani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201223103917.14687-1-chris@chris-wilson.co.uk

This function is a bit of an outlier, but try to change to a name that
is more in line with the rest of the intel_pps functions. No functional
changes.
Reviewed-by: NAnshuman Gupta <anshuman.gupta@intel.com>
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/644b89c1d88d4d2cd7a9426ec7d7ea14eb65a8bc.1610127741.git.jani.nikula@intel.com

Prefer keeping the unlocked variants hidden if possible. No functional
changes.
Reviewed-by: NAnshuman Gupta <anshuman.gupta@intel.com>
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/4b712770deab9de8c3aeea8df35269433977038a.1610127741.git.jani.nikula@intel.com

Follow the usual naming pattern for functions. No functional changes.
Reviewed-by: NAnshuman Gupta <anshuman.gupta@intel.com>
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/f03f7195fb62b250847909e0972f69a151095529.1610127741.git.jani.nikula@intel.com

Add an "encoder reset" call to hide some more pps functions, and clean
up the callers. A minor functional change is not holding the pps lock
across the whole operation in intel_dp_encoder_reset, but instead doing
it in two steps.

v2: rename intel_pps_reinit to intel_pps_encoder_reset for clarity
Reviewed-by: NAnshuman Gupta <anshuman.gupta@intel.com>
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/84a50f2700b19c6719cd3e1e931c64f1e2027551.1610127741.git.jani.nikula@intel.com

Add a new init call to be called only once, unlike some of the other
various init calls. This lets us hide more functions within
intel_pps.c. No functional changes.
Reviewed-by: NAnshuman Gupta <anshuman.gupta@intel.com>
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/290865ed9b0ea79120222a24c233a2d596239076.1610127741.git.jani.nikula@intel.com

Add a locked version of intel_pps_vdd_off_sync_unlocked() that does
everything the callers expect it to. No functional changes.

v2: Fix typo (Anshuman)
Reviewed-by: NAnshuman Gupta <anshuman.gupta@intel.com>
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1e722290208d827c5cae107fe41dbfe41a494793.1610127741.git.jani.nikula@intel.com

Follow the usual naming pattern for functions, both for the prefix and
the _unlocked suffix for functions that expect the lock to be held when
calling. No functional changes.
Reviewed-by: NAnshuman Gupta <anshuman.gupta@intel.com>
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/d119605ba3d9c86647a524375de2d7e3d57a5676.1610127741.git.jani.nikula@intel.com

Follow the usual naming pattern for functions. We don't need to repeat
"panel" here. No functional changes.

v2: Fix comment (Anshuman)
Reviewed-by: NAnshuman Gupta <anshuman.gupta@intel.com>
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/b858271bd4d9c4a2ce15a13301d7bd9f7d121eb5.1610127741.git.jani.nikula@intel.com

Follow the usual naming pattern for functions. No functional changes.
Reviewed-by: NAnshuman Gupta <anshuman.gupta@intel.com>
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/9887e4e278ed9a20da064bbf1d0845e52b7c3b3d.1610127741.git.jani.nikula@intel.com

Start following the usual naming pattern for functions. No functional
changes.
Reviewed-by: NAnshuman Gupta <anshuman.gupta@intel.com>
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/e37623750c592c08720f3b340cf85862d0f0ca12.1610127741.git.jani.nikula@intel.com

In a long overdue refactoring, split out all panel sequencer code from
intel_dp.c to new intel_pps.[ch].

The first part is mostly just code movement as-is, without cleanups or
functional changes.

We need to add a vlv_get_dpll() helper to get at the vlv/chv dpll from
pps code.

v2: Rebase.
Reviewed-by: NAnshuman Gupta <anshuman.gupta@intel.com>
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/14cc59d5734432ad976cd49ff8efce8fa413e5b2.1610127741.git.jani.nikula@intel.com

The DP PHY vswing/pre-emphasis level programming the driver does is
related to the DPTX -> first LTTPR link segment only. Accordingly it
should be only programmed when link training the first LTTPR and kept
as-is when training subsequent LTTPRs and the DPRX. For these latter
PHYs the vs/pe levels will be set in response to writing the
DP_TRAINING_LANEx_SET_PHY_REPEATERy DPCD registers (by an upstream LTTPR
TX PHY snooping this write access of its downstream LTTPR/DPRX RX PHY).
The above is also described in DP Standard v2.0 under 3.6.6.1.

While at it simplify and add the LTTPR that is link trained to the debug
message in intel_dp_set_signal_levels().

Fixes: b30edfd8 ("drm/i915: Switch to LTTPR non-transparent mode link training")
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NImre Deak <imre.deak@intel.com>
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201229172201.4155327-2-imre.deak@intel.com

intel_dp_set_signal_levels() is needed for link training, so move it to
intel_dp_link_training.c.
Signed-off-by: NImre Deak <imre.deak@intel.com>
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201229172201.4155327-1-imre.deak@intel.com

Handle CP_IRQ in DEVICE_SERVICE_IRQ_VECTOR_ESI0
It requires to call intel_hdcp_handle_cp_irq() in case
of CP_IRQ is triggered by a sink in DP-MST topology.

Cc: "Ville Syrjälä" <ville.syrjala@linux.intel.com>
Cc: Ramalingam C <ramalingam.c@intel.com>
Reviewed-by: NUma Shankar <uma.shankar@intel.com>
Reviewed-by: NRamalingam C <ramalingam.c@intel.com>
Tested-by: NKarthik B S <karthik.b.s@intel.com>
Signed-off-by: NAnshuman Gupta <anshuman.gupta@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210111081120.28417-4-anshuman.gupta@intel.com

Some new eDP panels don't like to operate at the max parameters, and
instead we need to go for an optimal confiugration. That unfortunately
doesn't work with older eDP panels which are generally only guaranteed
to work at the max parameters.

To solve these two conflicting requirements let's start with the optimal
setup, and if that fails we start again with the max parameters. The
downside is probably an extra modeset when we switch strategies but
I don't see a good way to avoid that.

For a bit of history we first tried to go for the fast+narrow in
commit 7769db58 ("drm/i915/dp: optimize eDP 1.4+ link config
fast and narrow"). but that had to be reverted due to regression
on older panels in commit f11cb1c1 ("drm/i915/dp: revert back
to max link rate and lane count on eDP"). So now we try to get
the best of both worlds by using both strategies.

v2: Deal with output_bpp and uapi vs. hw state split
    Reword some comments
v3: Rebase

Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Albert Astals Cid <aacid@kde.org> # v5.0 backport
Cc: Emanuele Panigati <ilpanich@gmail.com> # v5.0 backport
Cc: Matteo Iervasi <matteoiervasi@gmail.com> # v5.0 backport
Cc: Timo Aaltonen <tjaalton@ubuntu.com>
Cc: Kai-Heng Feng <kai.heng.feng@canonical.com>
Reviewed-by: NManasi Navare <manasi.d.navare@intel.com>
References: https://bugs.freedesktop.org/show_bug.cgi?id=105267
References: https://bugs.freedesktop.org/show_bug.cgi?id=109959
References: https://gitlab.freedesktop.org/drm/intel/issues/272Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210107182026.24848-1-ville.syrjala@linux.intel.com

We need a power_domain wakeref in pps_{lock,unlock} to prevent
a race while resetting pps state in intel_power_sequencer_reset().

intel_power_sequencer_reset() need a pps_mutex to access pps_pipe
but it can't grab pps_mutex due to deadlock with power_well
functions are called while holding pps_mutex.
intel_power_sequencer_reset() is called by power_well function
associated with legacy platforms like vlv and chv therefore re-use
the POWER_DOMAIN_DISPLAY_CORE power domain, which only used
by vlv and chv display power domain.

This will avoids the unnecessary noise of unrelated power wells
in pps_{lock,unlock}.

Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Signed-off-by: NAnshuman Gupta <anshuman.gupta@intel.com>
Reviewed-by: NJani Nikula <jani.nikula@intel.com>
Acked-by: NImre Deak <imre.deak@intel.com>
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210107112500.16216-1-anshuman.gupta@intel.com

Since multiple connectors may run intel_dp_aux_xfer conncurrently, a
single global pm_qos does not suffice. (One connector may disable the
dma-latency boost prematurely while the second is still depending on
it.) Instead of a single global pm_qos, track the pm_qos request for
each intel_dp.

v2: Move the pm_qos setup/teardown to intel_dp_aux_init/fini

Fixes: 9ee32fea ("drm/i915: irq-drive the dp aux communication")
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Reviewed-by: NImre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201230202309.23982-1-chris@chris-wilson.co.uk

Since we're about to start adding support for Intel's magic HDR
backlight interface over DPCD, we need to ensure we're properly
programming this field so that Intel specific sink services are exposed.
Otherwise, 0x300-0x3ff will just read zeroes.

We also take care not to reprogram the source OUI if it already matches
what we expect. This is just to be careful so that we don't accidentally
take the panel out of any backlight control modes we found it in.

v2:
* Add careful parameter to intel_edp_init_source_oui() to avoid
  re-writing the source OUI if it's already been set during driver
  initialization
Signed-off-by: NLyude Paul <lyude@redhat.com>
Reviewed-by: NRodrigo Vivi <rodrigo.vivi@intel.com>
Cc: thaytan@noraisin.net
Cc: Vasily Khoruzhick <anarsoul@gmail.com>
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201204223603.249878-2-lyude@redhat.com

If PCON has capability to convert RGB->YCbCr colorspace and also
to 444->420 downsampling then for any YUV420 only mode, we can
let the PCON do all the conversion. If the PCON supports
RGB->YCbCr conversion for all BT2020, BT709, BT601, choose
the one that is selected by userspace via connector colorspace
property, otherwise default to BT601.

v2: As suggested by Uma Shankar, considered case for colorspace
BT709 and BT2020, and default to BT601. Also appended dir
'display' in commit message.

v3: Fixed typo in condition for printing one of the error msg.

v4: As suggested by Uma Shankar:
-Fixed bug in determining the colorspace for RGB->YCbCr conversion.
-Fixed minor formatting issues
Also updated the commit message as per latest changes.
Reviewed-by: NUma Shankar <uma.shankar@intel.com>
Signed-off-by: NAnkit Nautiyal <ankit.k.nautiyal@intel.com>
[Jani: Fixed checkpatch PARENTHESIS_ALIGNMENT.]
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201218103723.30844-16-ankit.k.nautiyal@intel.com

When a source supporting DSC1.1 is connected to DSC1.2 HDMI2.1 sink
via DP HDMI2.1 PCON, the PCON can be configured to decode the
DSC1.1 compressed stream and encode to DSC1.2. It then sends the
DSC1.2 compressed stream to the HDMI2.1 sink.

This patch configures the PCON for DSC1.1 to DSC1.2 encoding, based
on the PCON's DSC encoder capablities and HDMI2.1 sink's DSC decoder
capabilities.

v2: Addressed review comments from Uma Shankar:
-fixed the error in packing pps parameter values
-added check for pcon in the pcon related function
-appended display in commit message

v3: Only consider non-zero DSC FRL b/w for determining max FRL b/w
supported by sink.
Signed-off-by: NAnkit Nautiyal <ankit.k.nautiyal@intel.com>
Reviewed-by: NUma Shankar <uma.shankar@intel.com>
[Jani: Fixed checkpatch BRACES, LINE_SPACING, PARENTHESIS_ALIGNMENT.]
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201218103723.30844-15-ankit.k.nautiyal@intel.com

This patch adds support to read and store the DSC capabilities of the
HDMI2.1 PCon encoder. It also adds a new field to store these caps,
The caps are read during dfp update and can later be used to get the
PPS parameters for PCON-HDMI2.1 sink pair. Which inturn will be used
to take a call to override the existing PPS-metadata, by either
writing the entire new PPS metadata, or by writing only the
PPS override parameters.

v2: Restructured the code to read all capability DPCDs at once and store
in an array in intel_dp structure.

v3: rebase
Signed-off-by: NAnkit Nautiyal <ankit.k.nautiyal@intel.com>
Reviewed-by: NUma Shankar <uma.shankar@intel.com>
[Jani: Fixed checkpatch PARENTHESIS_ALIGNMENT.]
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201218103723.30844-13-ankit.k.nautiyal@intel.com

In this patch enables support for detecting link failures between
PCON and HDMI sink in i915 driver. HDMI link loss indication to
upstream DP source is indicated via IRQ_HPD. This is followed by
reading of HDMI link configuration status (HDMI_TX_LINK_ACTIVE_STATUS).
If the PCON → HDMI 2.1 link status is off; reinitiate frl link
training to recover. Also, report HDMI FRL link error count range for
each individual FRL active lane is indicated by
DOWNSTREAM_HDMI_ERROR_STATUS_LN registers.

v2: Checked for dpcd read and write failures and added debug message.
(Uma Shankar)

v3: Rearranged code to re-start FRL link training or fall back to
TMDS mode.

v4: Resused function to check frl which inturn restarts FRL and
fallback to TMDS mode.
Signed-off-by: NSwati Sharma <swati2.sharma@intel.com>
Signed-off-by: NAnkit Nautiyal <ankit.k.nautiyal@intel.com>
Reviewed-by: Uma Shankar <uma.shankar@intel.com> (v2)
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201218103723.30844-12-ankit.k.nautiyal@intel.com

This patch calls functions to check FRL training requirements
for an HDMI2.1 sink, when connected through PCON.
The call is made before the DP link training. In case FRL is not
required or failure during FRL training, the TMDS mode is selected
for the pcon.

v2: moved check_frl_training() just after FEC READY, before
starting DP link training.

v3: rebase
Signed-off-by: NAnkit Nautiyal <ankit.k.nautiyal@intel.com>
Reviewed-by: NUma Shankar <uma.shankar@intel.com>
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201218103723.30844-11-ankit.k.nautiyal@intel.com

This patch adds functions to start FRL training for an HDMI2.1 sink,
connected via a PCON as a DP branch device.
This patch also adds a new structure for storing frl training related
data, when FRL training is completed.

v2: As suggested by Uma Shankar:
-renamed couple of variables for better clarity
-tweaked the macros used for correct semantics for true/false
-fixed other styling issues.

v3: Completed the TODO for condition for going to FRL mode.
Modified the condition to determine the required FRL b/w
based only on the Pcon and Sink's max FRL values.
Moved the frl structure initialization to intel_dp_init_connector().

v4: Fixed typo in initialization of frl structure.

v5: Always use FRL if its possible, instead of enabling only for
higher modes as done in v3.
Signed-off-by: NAnkit Nautiyal <ankit.k.nautiyal@intel.com>
Reviewed-by: Uma Shankar <uma.shankar@intel.com> (v2)
[Jani: Fixed checkpatch BRACES, CONSTANT_COMPARISON.]
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201218103723.30844-10-ankit.k.nautiyal@intel.com

HDMI2.1 PCON advertises Max FRL bandwidth supported by the PCON.

This patch captures this in dfp cap structure in intel_dp and uses
this to prune connector modes that cannot be supported by the PCON
and FRL bandwidth.

v2: Addressed review comments from Uma Shankar:
-tweaked the comparison of target bw and pcon frl bw to avoid roundup errors.
-minor modification of field names and comments.
Signed-off-by: NAnkit Nautiyal <ankit.k.nautiyal@intel.com>
Reviewed-by: NUma Shankar <uma.shankar@intel.com>
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201218103723.30844-9-ankit.k.nautiyal@intel.com

Move the initialization of the rc_model_size from the common code into
encoder code, allowing different encoders to specify the size according
to their needs. Keep using the hard coded value in the encoders for now
to make this a non-functional change.

Cc: Manasi Navare <manasi.d.navare@intel.com>
Cc: Vandita Kulkarni <vandita.kulkarni@intel.com>
Reviewed-by: NManasi Navare <manasi.d.navare@intel.com>
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/6843c4f6958619f7389180aa92fded7b9fdbb4ba.1607429866.git.jani.nikula@intel.com

This patch fixes the slice count computation algorithm
for calculating the slice count based on Peak pixel rate
and the max slice width allowed on the DSC engines.
We need to ensure slice count > min slice count req
as per DP spec based on peak pixel rate and that it is
greater than min slice count based on the max slice width
advertised by DPCD. So use max of these two.
In the prev patch we were using min of these 2 causing it
to violate the max slice width limitation causing a blank
screen on 8K@60.

Fixes: d9218c8f ("drm/i915/dp: Add helpers for Compressed BPP and Slice Count for DSC")
Cc: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: <stable@vger.kernel.org> # v5.0+
Signed-off-by: NManasi Navare <manasi.d.navare@intel.com>
Reviewed-by: NAnkit Nautiyal <ankit.k.nautiyal@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201204205804.25225-1-manasi.d.navare@intel.com
(cherry picked from commit d371d6ea)
Signed-off-by: NRodrigo Vivi <rodrigo.vivi@intel.com>

This patch fixes the slice count computation algorithm
for calculating the slice count based on Peak pixel rate
and the max slice width allowed on the DSC engines.
We need to ensure slice count > min slice count req
as per DP spec based on peak pixel rate and that it is
greater than min slice count based on the max slice width
advertised by DPCD. So use max of these two.
In the prev patch we were using min of these 2 causing it
to violate the max slice width limitation causing a blank
screen on 8K@60.

Fixes: d9218c8f ("drm/i915/dp: Add helpers for Compressed BPP and Slice Count for DSC")
Cc: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: <stable@vger.kernel.org> # v5.0+
Signed-off-by: NManasi Navare <manasi.d.navare@intel.com>
Reviewed-by: NAnkit Nautiyal <ankit.k.nautiyal@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201204205804.25225-1-manasi.d.navare@intel.com

Add wakeref tracking for the eDP encoders' AUX display power domain
references taken while the panel's VDD is enabled.

Cc: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NImre Deak <imre.deak@intel.com>
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20201130212200.2811939-7-imre.deak@intel.com

Enable HDMI Colorspace for LSPCON based devices. Sending Colorimetry
data for HDR using AVI infoframe. LSPCON firmware expects this and though
SOC drives DP, for HDMI panel AVI infoframe is sent to the LSPCON device
which transfers the same to HDMI sink.

v2: Dropped state managed in drm core as per Jani Nikula's suggestion.

v3: Aligned colorimetry handling for lspcon as per compute_avi_infoframes,
as suggested by Ville.

v4: Finally fixed this with Ville's help, re-phrased the commit header
and description.

v5: Register HDMI colorspace for lspcon and move this to
intel_dp_add_properties as we can't create property at late_register.

Credits-to: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NUma Shankar <uma.shankar@intel.com>
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201130204738.2443-9-uma.shankar@intel.com

With LSPCON we use the AVI infoframe to convey the colorimetry
information (as opposed to DP MSA/SDP), so the property we expose
should match the values we can stuff into the infoframe. Ie. we
must use the HDMI variant of the property, even though we drive
LSPCON in PCON mode. To that end just split
intel_attach_colorspace_property() into HDMI and DP variants
and let the caller worry about which one it wants to use.

Cc: Uma Shankar <uma.shankar@intel.com>
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: NUma Shankar <uma.shankar@intel.com>
Signed-off-by: NUma Shankar <uma.shankar@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201130204738.2443-8-uma.shankar@intel.com

Content type is supported on HDMI sink devices. Attached the
property for the same for LSPCON based devices.

v2: Added the content type programming when we are attaching
the property to connector, as suggested by Ville.

v3: Need to attach content type on intel_dp_add_properties
as creating of new properties is not possible at late_register.
Signed-off-by: NUma Shankar <uma.shankar@intel.com>
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201130204738.2443-7-uma.shankar@intel.com

Attach HDR property for Gen9 devices with MCA LSPCON
chips.

v2: Cleaned HDR property attachment logic based on capability
as per Jani Nikula's suggestion.

v3: Fixed the HDR property attachment logic as per the new changes
by Kai-Feng to align with lspcon detection failure on some devices.

v4: Add HDR proprty in late_register to handle lspcon detection,
as suggested by Ville.

v5: Init Lspcon only if advertized from BIOS.

v6: Added a Todo to plan a cleanup later, added Ville's RB.
Signed-off-by: NUma Shankar <uma.shankar@intel.com>
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201130204738.2443-4-uma.shankar@intel.com

Enough plumbing should be in place to throw the bigjoiner switch.
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NManasi Navare <manasi.d.navare@intel.com>
Reviewed-by: NManasi Navare <manasi.d.navare@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201117194718.11462-16-manasi.d.navare@intel.com

Make vdsc work when no output is enabled. The big joiner needs VDSC
on the slave, so enable it and set the appropriate bits.
So remove encoder usage from dsc functions.
Signed-off-by: NManasi Navare <manasi.d.navare@intel.com>
Reviewed-by: NAnimesh Manna <animesh.manna@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201117194718.11462-5-manasi.d.navare@intel.com

 When the clock is higher than the dotclock, try with 2 pipes enabled.
 If we can enable 2, then we will go into big joiner mode, and steal
 the adjacent crtc.

 This only links the crtc's in software, no hardware or plane
 programming is done yet. Blobs are also copied from the master's
 crtc_state, so it doesn't depend at commit time on the other
 crtc_state.

v6:
* Enable dSC for any mode->hdisplay > 5120
v5:
* Remove intel_dp_max_dotclock (Manasi)
v4:
* Fixes in intel_crtc_compute_config (Ville)
v3:
* Manual Rebase (Manasi)
 Changes since v1:
 - Rename pipe timings to transcoder timings, as they are now different.
  Changes since v2:
 - Rework bigjoiner checks; always disable slave when recalculating
   master. No need to have a separate bigjoiner pass any more.
 - Use pipe_mode instead of transcoder_mode, to clean up the code.
Signed-off-by: NMaarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: NManasi Navare <manasi.d.navare@intel.com>
[vsyrjala:
* hskew isn't a thing
* Do the dsc compute if bigjoiner is enabled, not the other way around]
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: NAnimesh Manna <animesh.manna@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201117194718.11462-4-manasi.d.navare@intel.com