- 10 12月, 2015 1 次提交
-
-
由 Thomas Huth 提交于
Only using 32 memslots for KVM on powerpc is way too low, you can nowadays hit this limit quite fast by adding a couple of PCI devices and/or pluggable memory DIMMs to the guest. x86 already increased the KVM_USER_MEM_SLOTS to 509, to satisfy 256 pluggable DIMM slots, 3 private slots and 253 slots for other things like PCI devices (i.e. resulting in 256 + 3 + 253 = 512 slots in total). We should do something similar for powerpc, and since we do not use private slots here, we can set the value to 512 directly. While we're at it, also remove the KVM_MEM_SLOTS_NUM definition from the powerpc-specific header since this gets defined in the generic kvm_host.h header anyway. Signed-off-by: NThomas Huth <thuth@redhat.com> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
- 09 12月, 2015 3 次提交
-
-
由 Geyslan G. Bem 提交于
The vcpu_book3s variable is assigned but never used. So remove it. Found using cppcheck. Signed-off-by: NGeyslan G. Bem <geyslan@gmail.com> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Thomas Huth 提交于
In the old DABR register, the BT (Breakpoint Translation) bit is bit number 61. In the new DAWRX register, the WT (Watchpoint Translation) bit is bit number 59. So to move the DABR-BT bit into the position of the DAWRX-WT bit, it has to be shifted by two, not only by one. This fixes hardware watchpoints in gdb of older guests that only use the H_SET_DABR/X interface instead of the new H_SET_MODE interface. Cc: stable@vger.kernel.org # v3.14+ Signed-off-by: NThomas Huth <thuth@redhat.com> Reviewed-by: NLaurent Vivier <lvivier@redhat.com> Reviewed-by: NDavid Gibson <david@gibson.dropbear.id.au> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Paul Mackerras 提交于
As we saw with the TM Bad Thing type of program interrupt occurring on the hrfid that enters the guest, it is not completely impossible to have a trap occurring in the guest entry/exit code, despite the fact that the code has been written to avoid taking any traps. This adds a check in the kvmppc_handle_exit_hv() function to detect the case when a trap has occurred in the hypervisor-mode code, and instead of treating it just like a trap in guest code, we now print a message and return to userspace with a KVM_EXIT_INTERNAL_ERROR exit reason. Of the various interrupts that get handled in the assembly code in the guest exit path and that can return directly to the guest, the only one that can occur when MSR.HV=1 and MSR.EE=0 is machine check (other than system call, which we can avoid just by not doing a sc instruction). Therefore this adds code to the machine check path to ensure that if the MCE occurred in hypervisor mode, we exit to the host rather than trying to continue the guest. Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
- 02 12月, 2015 1 次提交
-
-
由 Paolo Bonzini 提交于
Merge tag 'kvm-s390-next-4.5-1' of git://git.kernel.org/pub/scm/linux/kernel/git/kvms390/linux into HEAD KVM: s390 features, kvm_get_vcpu_by_id and stat Several features for s390 1. ESCA support (up to 248 vCPUs) 2. KVM detection: we can now detect if we support KVM (e.g. does KVM under KVM work?) kvm_stat: 1. cleanup the exit path kvm_get_vcpu_by_id: 1. Use kvm_get_vcpu_by_id where appropriate 2. Apply a heuristic to optimize for ID VCPU == No. VCPU
-
- 30 11月, 2015 23 次提交
-
-
由 Christian Borntraeger 提交于
rc already contains -ENOMEM, no need to assign it twice. Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com> Acked-by: NCornelia Huck <cornelia.huck@de.ibm.com> Reviewed-by: NDavid Hildenbrand <dahi@linux.vnet.ibm.com>
-
由 Heiko Carstens 提交于
This evaluates always to 'true'. Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com> Reviewed-by: NDavid Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>
-
由 David Hildenbrand 提交于
If we don't have support for virtualization (SIE), e.g. when running under a hypervisor not supporting execution of the SIE instruction, we should immediately abort loading the kvm module, as the SIE instruction cannot be enabled dynamically. Currently, the SIE instructions fails with an exception on a non-SIE host, resulting in the guest making no progress, instead of failing hard. Reviewed-by: NCornelia Huck <cornelia.huck@de.ibm.com> Acked-by: NMartin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: NDavid Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>
-
由 David Hildenbrand 提交于
This patch exposes the SIE capability (aka virtualization support) via /proc/cpuinfo -> "features" as "sie". As we don't want to expose this hwcap via elf, let's add a second, "internal"/non-elf capability list. The content is simply concatenated to the existing features when printing /proc/cpuinfo. We also add the defines to elf.h to keep the hwcap stuff at a common place. Acked-by: NMartin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: NDavid Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>
-
由 David Hildenbrand 提交于
This patch adds a way to check if the SIE with zArchitecture support is available. Acked-by: NMartin Schwidefsky <schwidefsky@de.ibm.com> Acked-by: NCornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: NDavid Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>
-
由 David Hildenbrand 提交于
sca_add_vpcu is not called for ucontrol guests. We must also not apply the sca checking for sca_can_add_vcpu as ucontrol guests do not have to follow the sca limits. As common code already checks that id < KVM_MAX_VCPUS all other data structures are safe as well. Signed-off-by: NDavid Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>
-
由 David Hildenbrand 提交于
Now that we already have kvm and the VCPU id set for the VCPU, we can convert sda_add_vcpu to look much more like sda_del_vcpu. Signed-off-by: NDavid Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>
-
由 David Hildenbrand 提交于
Let's always set and clear the sda when enabling/disabling a VCPU. Dealing with sda being set to something else makes no sense anymore as we enable a VCPU in the SCA now after it has been registered at the VM. Signed-off-by: NDavid Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>
-
由 David Hildenbrand 提交于
If something goes wrong in kvm_arch_vcpu_create, the VCPU has already been added to the sca but will never be removed. Trying to create VCPUs with duplicate ids (e.g. after a failed attempt) is problematic. Also, when creating multiple VCPUs in parallel, we could theoretically forget to set the correct SCA when the switch to ESCA happens just before the VCPU is registered. Let's add the VCPU to the SCA in kvm_arch_vcpu_postcreate, where we can be sure that no duplicate VCPU with the same id is around and the VCPU has already been registered at the VM. We also have to make sure to update ECB at that point. Signed-off-by: NDavid Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>
-
由 David Hildenbrand 提交于
Having no sca can never happen, even when something goes wrong when switching to ESCA. Otherwise we would have a serious bug. Let's remove this superfluous check. Acked-by: NDominik Dingel <dingel@linux.vnet.ibm.com> Signed-off-by: NDavid Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>
-
由 David Hildenbrand 提交于
If CPUSTAT_ECALL_PEND isn't set, we can't have an external call pending, so we can directly avoid taking the lock. Acked-by: NChristian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: NDavid Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>
-
This patch allows s390 to have more than 64 VCPUs for a guest (up to 248 for memory usage considerations), if supported by the underlaying hardware (sclp.has_esca). Signed-off-by: NEugene (jno) Dvurechenski <jno@linux.vnet.ibm.com> Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>
-
This patch adds code that performs transparent switch to Extended SCA on addition of 65th VCPU in a VM. Disposal of ESCA is added too. The entier ESCA functionality, however, is still not enabled. The enablement will be provided in a separate patch. This patch also uses read/write lock protection of SCA and its subfields for possible disposal at the BSCA-to-ESCA transition. While only Basic SCA needs such a protection (for the swap), any SCA access is now guarded. Signed-off-by: NEugene (jno) Dvurechenski <jno@linux.vnet.ibm.com> Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>
-
This patch updates the routines (sca_*) to provide transparent access to and manipulation on the data for both Basic and Extended SCA in use. The kvm.arch.sca is generalized to (void *) to handle BSCA/ESCA cases. Also the kvm.arch.use_esca flag is provided. The actual functionality is kept the same. Signed-off-by: NEugene (jno) Dvurechenski <jno@linux.vnet.ibm.com> Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>
-
This patch adds new structures and updates some existing ones to provide the base for Extended SCA functionality. The old sca_* structures were renamed to bsca_* to keep things uniform. The access to fields of SIGP controls were turned into bitfields instead of hardcoded bitmasks. Signed-off-by: NEugene (jno) Dvurechenski <jno@linux.vnet.ibm.com> Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>
-
This patch provides SCA-aware helpers to create/delete a VCPU. This is to prepare for upcoming introduction of Extended SCA support. Signed-off-by: NEugene (jno) Dvurechenski <jno@linux.vnet.ibm.com> Reviewed-by: NDavid Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>
-
This patch generalizes access to the SIGP controls, which is a part of SCA. This is to prepare for upcoming introduction of Extended SCA support. Signed-off-by: NEugene (jno) Dvurechenski <jno@linux.vnet.ibm.com> Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>
-
This patch generalizes access to the IPTE controls, which is a part of SCA. This is to prepare for upcoming introduction of Extended SCA support. Signed-off-by: NEugene (jno) Dvurechenski <jno@linux.vnet.ibm.com> Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>
-
Introduce sclp.has_hvs and sclp.has_esca to provide a way for kvm to check whether the extended-SCA and the home-virtual-SCA facilities are available. Signed-off-by: NEugene (jno) Dvurechenski <jno@linux.vnet.ibm.com> Reviewed-by: NDavid Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>
-
由 David Hildenbrand 提交于
Let's rewrite this function to better reflect how we actually handle exit_code. By dropping out early we can save a few cycles. This especially speeds up sie exits caused by host irqs. Also, let's move the special -EOPNOTSUPP for intercepts to the place where it belongs and convert it to -EREMOTE. Reviewed-by: NDominik Dingel <dingel@linux.vnet.ibm.com> Reviewed-by: NCornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: NDavid Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>
-
由 Janosch Frank 提交于
KVM creates debugfs files to export VM statistics to userland. To be able to remove them on kvm exit it tracks the files' dentries. Since their parent directory is also tracked and since each parent direntry knows its children we can easily remove them by using debugfs_remove_recursive(kvm_debugfs_dir). Therefore we don't need the extra tracking in the kvm_stats_debugfs_item anymore. Signed-off-by: NJanosch Frank <frankja@linux.vnet.ibm.com> Reviewed-By: NSascha Silbe <silbe@linux.vnet.ibm.com> Acked-by: NChristian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>
-
由 David Hildenbrand 提交于
Usually, VCPU ids match the array index. So let's try a fast lookup first before falling back to the slow iteration. Suggested-by: NChristian Borntraeger <borntraeger@de.ibm.com> Reviewed-by: NDominik Dingel <dingel@linux.vnet.ibm.com> Reviewed-by: NChristian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: NDavid Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>
-
由 David Hildenbrand 提交于
Let's reuse the new common function for VPCU lookup by id. Reviewed-by: NChristian Borntraeger <borntraeger@de.ibm.com> Reviewed-by: NDominik Dingel <dingel@linux.vnet.ibm.com> Signed-off-by: NDavid Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com> [split out the new function into a separate patch]
-
- 26 11月, 2015 12 次提交
-
-
由 Takuya Yoshikawa 提交于
Signed-off-by: NTakuya Yoshikawa <yoshikawa_takuya_b1@lab.ntt.co.jp> Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
由 Takuya Yoshikawa 提交于
As kvm_mmu_get_page() was changed so that every parent pointer would not get into the sp->parent_ptes chain before the entry pointed to by it was set properly, we can use the for_each_rmap_spte macro instead of pte_list_walk(). Signed-off-by: NTakuya Yoshikawa <yoshikawa_takuya_b1@lab.ntt.co.jp> Cc: Xiao Guangrong <guangrong.xiao@linux.intel.com> Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
由 Takuya Yoshikawa 提交于
Every time kvm_mmu_get_page() is called with a non-NULL parent_pte argument, link_shadow_page() follows that to set the parent entry so that the new mapping will point to the returned page table. Moving parent_pte handling there allows to clean up the code because parent_pte is passed to kvm_mmu_get_page() just for mark_unsync() and mmu_page_add_parent_pte(). In addition, the patch avoids calling mark_unsync() for other parents in the sp->parent_ptes chain than the newly added parent_pte, because they have been there since before the current page fault handling started. Signed-off-by: NTakuya Yoshikawa <yoshikawa_takuya_b1@lab.ntt.co.jp> Cc: Xiao Guangrong <guangrong.xiao@linux.intel.com> Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
由 Takuya Yoshikawa 提交于
Make kvm_mmu_alloc_page() do just what its name tells to do, and remove the extra allocation error check and zero-initialization of parent_ptes: shadow page headers allocated by kmem_cache_zalloc() are always in the per-VCPU pools. Signed-off-by: NTakuya Yoshikawa <yoshikawa_takuya_b1@lab.ntt.co.jp> Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
由 Takuya Yoshikawa 提交于
At some call sites of rmap_get_first() and rmap_get_next(), BUG_ON is placed right after the call to detect unrelated sptes which must not be found in the reverse-mapping list. Move this check in rmap_get_first/next() so that all call sites, not just the users of the for_each_rmap_spte() macro, will be checked the same way. One thing to keep in mind is that kvm_mmu_unlink_parents() also uses rmap_get_first() to handle parent sptes. The change will not break it because parent sptes are present, at least until drop_parent_pte() actually unlinks them, and not mmio-sptes. Signed-off-by: NTakuya Yoshikawa <yoshikawa_takuya_b1@lab.ntt.co.jp> Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
由 Takuya Yoshikawa 提交于
is_rmap_spte(), originally named is_rmap_pte(), was introduced when the simple reverse mapping was implemented by commit cd4a4e53 ("[PATCH] KVM: MMU: Implement simple reverse mapping"). At that point, its role was clear and only rmap_add() and rmap_remove() were using it to select sptes that need to be reverse-mapped. Independently of that, is_shadow_present_pte() was first introduced by commit c7addb90 ("KVM: Allow not-present guest page faults to bypass kvm") to do bypass_guest_pf optimization, which does not exist any more. These two seem to have changed their roles somewhat, and is_rmap_spte() just calls is_shadow_present_pte() now. Since using both of them without clear distinction just makes the code confusing, remove is_rmap_spte(). Signed-off-by: NTakuya Yoshikawa <yoshikawa_takuya_b1@lab.ntt.co.jp> Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
由 Takuya Yoshikawa 提交于
mmu_set_spte()'s code is based on the assumption that the emulate parameter has a valid pointer value if set_spte() returns true and write_fault is not zero. In other cases, emulate may be NULL, so a NULL-check is needed. Stop passing emulate pointer and make mmu_set_spte() return the emulate value instead to clean up this complex interface. Prefetch functions can just throw away the return value. Signed-off-by: NTakuya Yoshikawa <yoshikawa_takuya_b1@lab.ntt.co.jp> Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
由 Takuya Yoshikawa 提交于
Both __mmu_unsync_walk() and mmu_pages_clear_parents() have three line code which clears a bit in the unsync child bitmap; the former places it inside a loop block and uses a few goto statements to jump to it. A new helper function, clear_unsync_child_bit(), makes the code cleaner. Signed-off-by: NTakuya Yoshikawa <yoshikawa_takuya_b1@lab.ntt.co.jp> Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
由 Takuya Yoshikawa 提交于
Signed-off-by: NTakuya Yoshikawa <yoshikawa_takuya_b1@lab.ntt.co.jp> Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
由 Takuya Yoshikawa 提交于
New struct kvm_rmap_head makes the code type-safe to some extent. Signed-off-by: NTakuya Yoshikawa <yoshikawa_takuya_b1@lab.ntt.co.jp> Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
由 Yaowei Bai 提交于
In another patch kvm_is_visible_gfn is maken return bool due to this function only returns zero or one as its return value, let's also make kvmppc_visible_gpa return bool to keep consistent. No functional change. Signed-off-by: NYaowei Bai <baiyaowei@cmss.chinamobile.com> Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
由 Yaowei Bai 提交于
This patch makes kvm_para_has_feature return bool due to this particular function only using either one or zero as its return value. No functional change. Signed-off-by: NYaowei Bai <baiyaowei@cmss.chinamobile.com> Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-