1. 25 2月, 2009 11 次提交
  2. 24 2月, 2009 25 次提交
    • S
      firedtv: massive refactoring · 15490795
      Stefan Richter 提交于
      Combination of the following changes:
      
      Mon, 23 Feb 2009 14:21:10 +0100 (CET)
      firedtv: reinstate debug logging option
      
          Henrik Kurelid tells me that FCP debug logging (which I removed during
          cleanups) is still useful when working on driver issues together with
          end users.  So bring it back in an updated form with only 60% of the
          original code footprint.
      
          Logging can be enabled with
          # echo -1 > /sys/module/firedtv/parameters/debug
      
          1 instead of -1 enables only FCP header logging,
          2 instead of -1 enables only hexdumps of the entire FCP frames.
          0 switches logging off again.
      
      Fri, 20 Feb 2009 20:54:27 +0100 (CET)
      firedtv: build fix for INPUT=m and DVB_FIREDTV=y
      
      Thu, 19 Feb 2009 20:40:39 +0100
      firedtv: use msecs_to_jiffies
      
          Pointed out by Mauro Carvalho Chehab.
      
      Sun Feb 15 20:50:46 CET 2009
      firedtv: some more housekeeping
      
          Fix an old checkpatch warning and a new compiler warning.
      
      Sun Feb 15 15:33:17 CET 2009
      firedtv: rename a file once more
      
          At the moment, about a third of avc.c is specific to FireDTVs rather
          than generic AV/C code.  Rename it to firedtv-avc.c.
      
      Sun Feb 15 15:33:17 CET 2009
      firedtv: dvb demux: more compact channels backing store
      
          Replace struct firedtv_channel { bool active; int pid; } channel[16];
          by unsigned long channel_active; u16 channel_pid[16];.
      
      Sun Feb 15 15:33:17 CET 2009
      firedtv: dvb demux: some simplifications
      
          c->active was unnecessarily cleared twice.
      
          Also, by marking the channel inactive before the for loop,
          the loop becomes identical with fdtv_channel_collect().
      
      Sun Feb 15 15:33:17 CET 2009
      firedtv: dvb demux: remove a bogus loop
      
          This loop is unnecessary because
            - only active channel[].pid's will be sent to the device,
            - when a channel is activated, its pid is set to dvbdmxfeed->pid.
      
          Perhaps the original code was there because it was initially not fully
          covered by the fdtv->demux_mutex.
      
      Sun Feb 15 15:33:17 CET 2009
      firedtv: dvb demux: fix mutex protection
      
          fdtv_start_feed() accessed the channel list unsafely.
          Fully serialize it with itself and fdtv_stop_feed().
      
      Sun Feb 15 15:33:17 CET 2009
      firedtv: dvb demux: fix missing braces
      
          Original code was:
                  ...
                  case DMX_TS_PES_OTHER:
                          //Dirty fix to keep firesat->channel pid-list up to date
                          for(k=0;k<16;k++){
                                  if(firesat->channel[k].active == 0)
                                          firesat->channel[k].pid =
                                                  dvbdmxfeed->pid;
                                          break;
                          }
                          channel = firesat_channel_allocate(firesat);
                          break;
                  default:
                  ...
      
          Looks bogus in several respects. For now let's just add braces to the if
          because that seems to be what the author meant.
      
      Sun Feb 15 15:33:17 CET 2009
      firedtv: allow build without input subsystem
      
          !CONFIG_INPUT is very unlikely on systems on which firedtv is of
          interest.  But we can easily support it.
      
      Sun Feb 15 15:33:17 CET 2009
      firedtv: replace EXTRA_CFLAGS by ccflags
      
          The former are deprecated.
          The latter can depend on Kconfig variables.
      
      Sun Feb 15 15:33:17 CET 2009
      firedtv: concentrate ieee1394 dependencies
      
          Move the entire interface with drivers/ieee1394 to firedtv-1394.c.
          Move 1394-independent module initialization code to firedtv-dvb.c.
      
          This prepares interfacing with drivers/firewire.
      
      Sun Feb 15 15:33:17 CET 2009
      firedtv: amend Kconfig menu prompt
      
      Sun Feb 15 15:33:17 CET 2009
      firedtv: remove kernel version compatibility macro
      
      Sun Feb 15 15:33:17 CET 2009
      firedtv: combine header files
      
          avc.h and firedtv-*.h are small and currently not shared with other
          drivers, hence concatenate them all into firedtv.h.
      
      Sun Feb 15 15:33:17 CET 2009
      firedtv: misc style touch-ups
      
          Standardize on lower-case hexadecimal constants.  Adjust whitespace.
          Omit unnecessary pointer type casts and an unnecessary list head
          initialization.  Use dev_printk.
      
      Wed Feb 11 21:21:04 CET 2009
      firedtv: avc, ci: remove unused constants
      
      Wed Feb 11 21:21:04 CET 2009
      firedtv: avc: remove bitfields from read descriptor response operands
      
          Don't use bitfields in struct types of on-the-wire data.
      
      Wed Feb 11 21:21:04 CET 2009
      firedtv: avc: remove bitfields from DSD command operands
      
          Don't use bitfields in struct types of on-the-wire data.
      
      Wed Feb 11 21:21:04 CET 2009
      firedtv: avc: header file cleanup
      
          Remove unused constants and declarations.
          Move privately used constants into .c files.
      
      Wed Feb 11 21:21:04 CET 2009
      firedtv: avc: remove bitfields from FCP frame types
      
          Don't use bitfields in struct types of on-the-wire data.
      
          Also move many privately used constants from avc.h to avc.c
          and remove some unused constants.
      
      Sun, 18 Jan 2009 16:30:00 +0100 (CET)
      firedtv: avc: fix offset in avc_tuner_get_ts
      
          The parentheses were wrong.  It didn't matter though because this code
          only writes a 0 into an area which is already initialized to 0.
      
      Sun, 18 Jan 2009 16:30:00 +0100 (CET)
      firedtv: avc: reduce stack usage, remove two typedefs
      
          It is safe to share a memory buffer for command frame and response frame
          because the response data come in after the command frame was last used.
      
          Even less stack would be required if only the actual required frame size
          instead of the entire FCP register size was allocated.
      
          Also, rename the defined types AVCCmdFrm and AVCRspFrm to
          struct avc_command_frame and struct avc_response_frame.
          TODO:  Remove the bitfields in these types.
      
      Sun, 18 Jan 2009 16:30:00 +0100 (CET)
      firedtv: cmp: move code to avc
      
      Sun, 18 Jan 2009 16:30:00 +0100 (CET)
      firedtv: iso: move code to firedtv-1394
      
      Sun, 18 Jan 2009 16:30:00 +0100 (CET)
      firedtv: iso: remove unnecessary struct type definitions
      
      Sun, 18 Jan 2009 16:30:00 +0100 (CET)
      firedtv: iso: style changes and fixlets
      
          Add cleanup after failure in setup_iso_channel.
          Replace printk() by dv_err().
          Decrease indentation level in rawiso_activity_cb().
      Signed-off-by: NStefan Richter <stefanr@s5r6.in-berlin.de>
      15490795
    • R
      firedtv: rename files, variables, functions from firesat to firedtv · a70f81c1
      Rambaldi 提交于
      Combination of the following changes:
      
      Sat, 17 Jan 2009 14:47:34 +0100
      firedtv: rename variables and functions from firesat to firedtv
      Signed-off-by: NRambaldi <Rambaldi@xs4all.nl>
      
          Additional changes by Stefan Richter:
      
          Renamed struct firedtv *firedtv to struct firedtv *fdtv and
          firedtv_foo_bar() to fdtv_foo_bar() for brevity.
      
      Sat, 17 Jan 2009 13:07:44 +0100
      firedtv: rename files from firesat to firedtv
      Signed-off-by: NRambaldi <Rambaldi@xs4all.nl>
      
          Additional changes by Stefan Richter:
      
          Name the directory "firewire" instead of "firedtv".
          Standardize on "-" instead of "_" in file names, because that's what
          drivers/firewire/ and drivers/media/dvb/dvb-usb/ use too.
          Build fix.
      Signed-off-by: NStefan Richter <stefanr@s5r6.in-berlin.de>
      a70f81c1
    • J
      firedtv: Use DEFINE_SPINLOCK · 291f006e
      Julia Lawall 提交于
      SPIN_LOCK_UNLOCKED is deprecated.  The following makes the change suggested
      in Documentation/spinlocks.txt
      Signed-off-by: NJulia Lawall <julia@diku.dk>
      Signed-off-by: NStefan Richter <stefanr@s5r6.in-berlin.de>
      291f006e
    • H
      firedtv: fix registration - adapter number could only be zero · a40bf559
      Henrik Kurelid 提交于
      There was a bug causing the initialization to fail if adapter number was
      greater than zero. The adapter was however registered which caused the driver
      to oops the second time initialization was tried.
      Signed-off-by: NHenrik Kurelid <henrik@kurelid.se>
      Signed-off-by: NStefan Richter <stefanr@s5r6.in-berlin.de>
      a40bf559
    • H
      firedtv: use length_field() of PMT as length · 7199e523
      Henrik Kurelid 提交于
      Parsed and used the length_field() of the PMT message instead of using
      the length field of the message struct, which does not seem to be filled
      correctly by e.g. MythTV.
      Signed-off-by: NHenrik Kurelid <henrik@kurelid.se>
      Signed-off-by: NStefan Richter <stefanr@s5r6.in-berlin.de>
      7199e523
    • H
      firedtv: fix returned struct for ca_info · 096edfbf
      Henrik Kurelid 提交于
      The SystemId of the ca_info message was filled with garbage.
      It now returns what the card returns.
      Signed-off-by: NHenrik Kurelid <henrik@kurelid.se>
      Signed-off-by: NStefan Richter <stefanr@s5r6.in-berlin.de>
      096edfbf
    • S
      firedtv: cleanups and minor fixes · 8ae83cdf
      Stefan Richter 提交于
      Combination of the following changes:
      
      Sun, 2 Nov 2008 13:45:00 +0100 (CET)
      firedtv: increase FCP frame length for DVB-S2 tune QSPK
      
          The last three bytes didn't go out to the wire.
          Effect of the fix not yet tested.
      
      Sun, 2 Nov 2008 13:45:00 +0100 (CET)
      firedtv: replace mdelay by msleep
      
          These functions can sleep (and in fact sleep for the duration of a whole
          FCP transaction).  Hence msleep is more appropriate here.
      
      Sun, 2 Nov 2008 13:45:00 +0100 (CET)
      firedtv: trivial reorganization in avc_api
      
          Reduce nesting level by factoring code out of avc_tuner_dsd() into
          helper functions.
      
      Sun, 2 Nov 2008 13:45:00 +0100 (CET)
      firedtv: trivial cleanups in avc_api
      
          Use dev_err(), no CamelCase function names, adjust comment style, put
          #if 0 around unused code and add FIXME comments, standardize on
          lower-case hexadecimal constants, use ALIGN() for some frame length
          calculations, make a local function static...
      
          The code which writes FCP command frames and reads FCP response frames
          is not yet brought into canonical kernel coding style because this
          involves changes of typedefs (on-the-wire bitfields).
      
      Sun, 2 Nov 2008 13:45:00 +0100 (CET)
      firedtv: don't retry oPCR updates endlessly
      
          In the theoretical case that the target node wasn't handling the lock
          transactions as expected or there was continued interference by other
          initiating nodes, these functions wouldn't return for ages.
      
      Sun, 2 Nov 2008 13:45:00 +0100 (CET)
      firedtv: remove bitfield typedefs from cmp, fix for big endian CPUs
      
          Use macros/ inline functions/ standard byte order accessors to read and
          write oPCR register values (big endian bitfields, on-the-wire data).
          The new code may not be the ultimate optimum, but it doesn't occur in a
          hot path.
      
          This fixes the CMP code for big endian CPUs.  So far I tested it only on
          a little endian CPU though.
      
          For now, include <asm/byteorder.h> instead of <linux/byteorder.h>
          because drivers/ieee1394/*.h also include the former.  I will fix this
          in drivers/ieee1394 and firedtv later.
      
      Sun, 2 Nov 2008 13:45:00 +0100 (CET)
      firedtv: trivial cleanups in cmp
      
          Reduce nesting level by means of early exit and goto.
          Remove obsolete includes, use dev_err(), no CamelCase function names...
      
      Sun, 2 Nov 2008 13:45:00 +0100 (CET)
      firedtv: trivial cleanups in firesat-ci
      
          Whitespace, variable names, comment style...
      
          Also, use dvb_generic_open() and dvb_generic_release() directly as
          our hooks in struct file_operations because firedtv's wrappers merely
          called these generic functions.
      
      Sun, 2 Nov 2008 13:45:00 +0100 (CET)
      firedtv: remove CA debug code
      
          This looks like it is not necessary to have available for endusers who
          cannot patch kernels for bug reporting and tests of fixes.
      
      Sun, 2 Nov 2008 13:45:00 +0100 (CET)
      firedtv: remove AV/C debug code
      
          This looks like it is not necessary to have available for endusers who
          cannot patch kernels for bug reporting and tests of fixes.
      
      Sun, 2 Nov 2008 13:45:00 +0100 (CET)
      firedtv: remove various debug code
      
          Most of this was already commented out.  And that which wasn't is not
          relevant in normal use.
      
      Mon, 29 Sep 2008 19:22:48 +0200 (CEST)
      firedtv: register input device as child of a FireWire device
      
          Instead of one virtual input device which exists for the whole lifetime
          of the driver and receives events from all connected FireDTVs, register
          one input device for each firedtv device.  These input devices will show
          up as children of the respective firedtv devices in the sysfs hierarchy.
      
          However, the implementation falls short because of a bug in userspace:
          Udev's path_id script gets stuck with 100% CPU utilization, maybe
          because of an assumption about the maximum ieee1394 device hierarchy
          depth.
      
          To avoid this bug, we use the fw-host device instead of the proper
          unit_directory device as parent of the input device.
      
          There is hope that the port to the new firewire stack won't be inhibited
          by this userspace bug because there are no fw-host devices there.
      
      Mon, 29 Sep 2008 19:21:52 +0200 (CEST)
      firedtv: fix string comparison and a few sparse warnings
      
          Sparse found a bug:
          	while ((kv_buf + kv_len - 1) == '\0')
          should have been
          	while (kv_buf[kv_len - 1] == '\0')
          We fix it by a better implementation without a temporary copy.
      
          Also fix sparse warnings of 0 instead of NULL and signedness mismatches.
      
      Mon, 29 Sep 2008 19:21:20 +0200 (CEST)
      firedtv: remove unused struct members
      
          and redefine an int as a bool.
      
      Mon, 29 Sep 2008 19:20:36 +0200 (CEST)
      firedtv: fix initialization of dvb_frontend.ops
      
          There was a NULL pointer reference if no dvb_frontend_info was found.
      
          Also, don't directly assign struct typed values to struct typed
          variables.  Instead write out assignments to individual strcut members.
          This reduces module size by about 1 kB.
      
      Mon, 29 Sep 2008 19:19:41 +0200 (CEST)
      firedtv: remove unused dual subunit code from initialization
      
          No FireDTVs with more than one subunit exists, hence simplify the
          initialization for the special case of one subunit.  The driver was able
          to check for more than one subunit but was broken for more than two
          subunits.
      
          While we are at it, add several missing cleanups after failure, and
          include a few dynamically allocated structures diretly into struct
          firesat instead of allocating them separately.
      
      Mon, 29 Sep 2008 19:19:08 +0200 (CEST)
      firedtv: add vendor_id and version to driver match table
      
          Now that nodemgr was enhanced to match against the root directory's
          vendor ID if there isn't one in the unit directory, use this to
          prevent firedtv to be bound to wrong devices by accident.
      
          Also add the AV/C software version ID to the match flags for
          completeness; specifier ID and software only make sense as a pair.
      
      Mon, 29 Sep 2008 19:18:30 +0200 (CEST)
      firedtv: use hpsb_node_read(), _write(), _lock()
      
          because they are simpler and treat the node generation more correctly.
          While we are at it, clean up and simplify surrounding code.
      Signed-off-by: NStefan Richter <stefanr@s5r6.in-berlin.de>
      8ae83cdf
    • S
      ieee1394: remove superfluous assertions · 00fc3072
      Stefan Richter 提交于
      hpsb_read, hpsb_write, hpsb_lock are sleeping functions which nobody is
      in danger to use in atomic context.  Besides, in_interrupt does not
      cover all types of atomic context.
      Signed-off-by: NStefan Richter <stefanr@s5r6.in-berlin.de>
      00fc3072
    • S
      ieee1394: inherit ud vendor_id from node vendor_id · 9c939e4d
      Stefan Richter 提交于
      While Module_Vendor_ID in the configuration ROM's root directory is
      mandatory, there often aren't vendor IDs in unit directories.  This
      affects the new firedtv driver which is meant to be auto-loaded and
      matched only for vendor-specific devices.
      
      We now always copy ne->vendor_id into ud->vendor_id before we scan a
      unit directory (and fill in a possibly present vendor ID from there).
      This way, the root directory's vendor ID is used as fallback in the
      "uevent" environment for modprobe'ing per module alias when a node was
      plugged in, and in the driver match routine when protocol drivers are
      bound to unit directories.  It will however not be used as sysfs
      attribute of a unit directory device.
      Signed-off-by: NStefan Richter <stefanr@s5r6.in-berlin.de>
      9c939e4d
    • S
      ieee1394: add hpsb_node_read() and hpsb_node_lock() · b33fdd6c
      Stefan Richter 提交于
      These will be used by the firedtv driver.  Like hpsb_node_write() they
      are much better APIs for high-level drivers than hpsb_write() and its
      siblings --- easier to use correctly and also terser.
      
      Unlike hspb_node_write(), the two new functions will only be used by
      one call site.  Hence make them static inline instead of exported
      symbols.
      Signed-off-by: NStefan Richter <stefanr@s5r6.in-berlin.de>
      b33fdd6c
    • S
      ieee1394: use correct barrier types between accesses of nodeid and generation · 29f8ea8a
      Stefan Richter 提交于
      A compiler barrier (explicit on the read side, implicit on the write
      side) is not quite enough for what has to be accomplished here.  Use
      hardware memory barriers on systems which need them.
      
      (Of course a full fix of generation handling would require much more
      than this.  The ieee1394 core's bus generation counter had to be tied to
      the controller's bus generation counter; cf. Kristian's stack.  It's
      just that I have other current business with the code around these
      barrier()s, so why not do at least this small fix.)
      Signed-off-by: NStefan Richter <stefanr@s5r6.in-berlin.de>
      29f8ea8a
    • S
      firesat: copyrights, rename to firedtv, API conversions, fix remote control input · 612262a5
      Stefan Richter 提交于
      Combination of the following changes:
      
      Tue, 26 Aug 2008 00:17:30 +0200 (CEST)
      firedtv: fix remote control input
      
          and update the scancode-to-keycode mapping to a current model.  Per
          default, various media key keycodes are emitted which closely match what
          is printed on the remote.  Userland can modify the mapping by means of
          evdev ioctls.  (Not tested.)
      
          The old scancode-to-keycode mapping is left in the driver but cannot be
          modified by ioctls.  This preserves status quo for old remotes.
      
      Tue, 26 Aug 2008 00:11:28 +0200 (CEST)
      firedtv: replace tasklet by workqueue job
      
          Non-atomic context is a lot nicer to work with.
      
      Sun, 24 Aug 2008 23:30:00 +0200 (CEST)
      firedtv: move some code back to ieee1394 core
      
          Partially reverts "ieee1394: remove unused code" of Linux 2.6.25.
      
      Sun, 24 Aug 2008 23:29:30 +0200 (CEST)
      firedtv: replace semaphore by mutex
      
          firesat->avc_sem and ->demux_sem have been used exactly like a mutex.
          The only exception is the schedule_remotecontrol tasklet which did a
          down_trylock in atomic context.  This is not possible with
          mutex_trylock; however the whole remote control related code is
          non-functional anyway at the moment.  This should be fixed eventually,
          probably by turning the tasklet into a worqueue job.
      
          Convert everything else from semaphore to mutex.
      
          Also rewrite a few of the affected functions to unlock the mutex at a
          single exit point, instead of in several branches.
      
      Sun, 24 Aug 2008 23:28:45 +0200 (CEST)
      firedtv: some header cleanups
      
          Unify #ifndef/#define/#endif guards against multiple inclusion.
          Drop extern keyword from function declarations.
          Remove #include's into header files where struct declarations suffice.
      
          Remove unused ohci1394 interface and related unused ieee1394 interfaces.
      
          Add a few missing #include's and remove a few apparently obsolete ones.
          Sort them alphabetically.
      
      Sun, 24 Aug 2008 23:27:45 +0200 (CEST)
      firedtv: nicer registration message and some initialization fixes
      
          Print the correct name in dvb_register_adapter().
      
          While we are at it, replace two switch cascades by one for loop, remove
          a superfluous member of struct firesat and of two unused arguments of
          AVCIdentifySubunit(), and fix bogus kfree's in firesat_dvbdev_init().
      
      Tue, 26 Aug 2008 14:24:17 +0200 (CEST)
      firesat: rename to firedtv
      
          Suggested by Andreas Monitzer.  Besides DVB-S/-S2 receivers, the driver
          also supports DVB-C and DVB-T receivers, hence the previous project name
          is too narrow now.
      
          Not yet done:  Rename source directory, files, types, variables...
      
      Sun, 24 Aug 2008 23:26:23 +0200 (CEST)
      firesat: add missing copyright notes
      
          Reported by Andreas Monitzer and Christian Dolzer.
      Signed-off-by: NStefan Richter <stefanr@s5r6.in-berlin.de>
      612262a5
    • H
      firesat: avc resend · 81c67b7f
      Henrik Kurelid 提交于
      - Add resending of AVC message to the card if no answer is received
        - Replace the homebrewed event_wait function with a standard wait queue
        - Clean up of log/error messages
        - Increase debug level of avc communication
      Signed-off-by: NHenrik Kurelid <henrik@kurelid.se>
      Signed-off-by: NStefan Richter <stefanr@s5r6.in-berlin.de>
      81c67b7f
    • H
      firesat: update isochronous interface, add CI support · df4846c3
      Henrik Kurelid 提交于
      I have finally managed to get the CI support for the card working. The
      implementation is a bare minimum to get encrypted channels to work in
      kaffeine. It works fine with my T/CI card. Now and then I get an AVC
      timeout and have to retune a channel in order to get it to work. Once
      the CAM seemed to hang so I needed to remove and insert it again. I.e.
      there are a number of glitches.
      
      The latest version contains the following changes:
      
        - Implemented the new hpsb iso interface so that data can be received
          from the card
        - Reduced some timers for demux setup which caused scanning to timeout
        - Added possibility to unload driver
        - Added support for getting C/N ratio
        - Added two debug parameters to the driver; ca_debug and
          avc_comm_debug.
        - Added CI support that works for me in kaffeine
        - Started working on CI MMI support. It now supports:
            o Enter menu
            o Receiving MMI objects
        - Added support for 64-bit platforms
        - Corrected DVB-C modulations problems
      Signed-off-by: NHenrik Kurelid <henrik@kurelid.se>
      Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> (rebased, whitespace)
      df4846c3
    • B
      firesat: add DVB-S support for DVB-S2 devices · 2c228614
      Ben Backx 提交于
      ...so S2 owners now can at least watch DVB-S channels in linux.
      Signed-off-by: NBen Backx <ben@bbackx.com>
      Signed-off-by: NStefan Richter <stefanr@s5r6.in-berlin.de>
      2c228614
    • B
      firesat: fix DVB-S2 device recognition · f1bbb43a
      Ben Backx 提交于
      This only makes sure that a DVB-S2 device is really recognized as a S2,
      nothing else is added yet. It's using the string containing the model
      that is stored in the configuration ROM, the older version was using
      some hardware revision dependent part of the ROM.
      Signed-off-by: NBen Backx <ben@bbackx.com>
      Signed-off-by: NStefan Richter <stefanr@s5r6.in-berlin.de>
      f1bbb43a
    • G
      DVB: add firesat driver · c81c8b68
      Greg Kroah-Hartman 提交于
      Original code written by Christian Dolzer <c.dolzer@digital-everywhere.com>
      
      Cleaned up by Greg.
      
      Major cleanup and reorg by Manu Abraham <manu@linuxtv.org>
      
      Additions also by Ben Backx <ben@bbackx.com>
      
      Cc: Christian Dolzer <c.dolzer@digital-everywhere.com>
      Cc: Andreas Monitzer <andy@monitzer.com>
      Cc: Manu Abraham <manu@linuxtv.org>
      Cc: Fabio De Lorenzo <delorenzo.fabio@gmail.com>
      Cc: Robert Berger <robert.berger@reliableembeddedsystems.com>
      Signed-off-by: NBen Backx <ben@bbackx.com>
      Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
      
      Added missing dependency to dvb/firesat/Kconfig,
      Reported-by: NRandy Dunlap <randy.dunlap@oracle.com>
      
      Tweaked dvb/Makefile.
      Signed-off-by: NStefan Richter <stefanr@s5r6.in-berlin.de>
      c81c8b68
    • L
      Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6 · f7e603ad
      Linus Torvalds 提交于
      * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6:
        net: amend the fix for SO_BSDCOMPAT gsopt infoleak
        netns: build fix for net_alloc_generic
      f7e603ad
    • K
      proc: proc_get_inode should de_put when inode already initialized · cac71121
      Krzysztof Sachanowicz 提交于
      de_get is called before every proc_get_inode, but corresponding de_put is
      called only when dropping last reference to an inode. This might cause
      something like
      remove_proc_entry: /proc/stats busy, count=14496
      to be printed to the syslog.
      
      The fix is to call de_put in case of an already initialized inode in
      proc_get_inode.
      Signed-off-by: NKrzysztof Sachanowicz <analyzer1@gmail.com>
      Tested-by: NMarcin Pilipczuk <marcin.pilipczuk@gmail.com>
      Acked-by: NAl Viro <viro@ZenIV.linux.org.uk>
      Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      cac71121
    • J
      i915: suspend/resume interrupt state · 226485e9
      Jesse Barnes 提交于
      In the KMS case, enter/leavevt won't fix up the interrupt handler for
      us, so we need to do it at suspend/resume time.  Make sure we don't fail
      the resume if the chip is hung either.
      Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>
      Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      226485e9
    • K
      Fix an oops in i915_gem_retire_requests() · 6c0594a3
      Karsten Wiese 提交于
      dev_priv->hw_status_page can be NULL, if i915_gem_retire_requests()
      is called from i915_gem_busy_ioctl().
      
      Signed-off-by Karsten Wiese <fzu@wemgehoertderstaat.de>
      Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      6c0594a3
    • E
      net: amend the fix for SO_BSDCOMPAT gsopt infoleak · 50fee1de
      Eugene Teo 提交于
      The fix for CVE-2009-0676 (upstream commit df0bca04) is incomplete. Note
      that the same problem of leaking kernel memory will reappear if someone
      on some architecture uses struct timeval with some internal padding (for
      example tv_sec 64-bit and tv_usec 32-bit) --- then, you are going to
      leak the padded bytes to userspace.
      Signed-off-by: NEugene Teo <eugeneteo@kernel.sg>
      Reported-by: NMikulas Patocka <mpatocka@redhat.com>
      Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      50fee1de
    • C
      netns: build fix for net_alloc_generic · ebe47d47
      Clemens Noss 提交于
      net_alloc_generic was defined in #ifdef CONFIG_NET_NS, but used
      unconditionally. Move net_alloc_generic out of #ifdef.
      Signed-off-by: NClemens Noss <cnoss@gmx.de>
      Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      ebe47d47
    • L
      ea5a42c2
    • L
      Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6 · d38e84ee
      Linus Torvalds 提交于
      * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6:
        netns: fix double free at netns creation
        veth : add the set_mac_address capability
        sunlance: Beyond ARRAY_SIZE of ib->btx_ring
        sungem: another error printed one too early
        ISDN: fix sc/shmem printk format warning
        SMSC: timeout reaches -1
        smsc9420: handle magic field of ethtool_eeprom
        sundance: missing parentheses?
        smsc9420: fix another postfixed timeout
        wimax/i2400m: driver loads firmware v1.4 instead of v1.3
        vlan: Update skb->mac_header in __vlan_put_tag().
        cxgb3: Add support for PCI ID 0x35.
        tcp: remove obsoleted comment about different passes
        TG3: &&/|| confusion
        ATM: misplaced parentheses?
        net/mv643xx: don't disable the mib timer too early and lock properly
        net/mv643xx: use GFP_ATOMIC while atomic
        atl1c: Atheros L1C Gigabit Ethernet driver
        net: Kill skb_truesize_check(), it only catches false-positives.
        net: forcedeth: Fix wake-on-lan regression
      d38e84ee
  3. 23 2月, 2009 4 次提交