Fix typo in vivid that caused all HDMI outputs to have the same
physical address.
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

When calculate OUTPUT buffer size in vidioc_try_fmt, it will
add more size hw need in each plane.
But in mtk_vcodec_enc_set_default_params, it do not add
same size in each plane.
This makes v4l2-compliance test fail.
This patch fix the issue.
Signed-off-by: NTiffany Lin <tiffany.lin@mediatek.com>
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

There is really no reason to zero the reply and timeout fields if an
error occurs. This is a left-over from earlier versions where that
was used to signal errors, but this is now handled by the rx/tx_status
fields.
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

The newly added mtk-vcodec driver produces a number of warnings in an
ARM allmodconfig build, mainly since it assumes that dma_addr_t is
32-bit wide:

mtk-vcodec/venc/venc_vp8_if.c: In function 'vp8_enc_alloc_work_buf':
mtk-vcodec/venc/venc_vp8_if.c:212:191: error: cast to pointer from integer of different size [-Werror=int-to-pointer-cast]
mtk-vcodec/venc/venc_h264_if.c: In function 'h264_enc_alloc_work_buf':
mtk-vcodec/venc/venc_h264_if.c:297:190: error: cast to pointer from integer of different size [-Werror=int-to-pointer-cast]

This rearranges the format strings and type casts to what they should
have been in order to avoid the warnings. e0f80d8d ("[media]
mtk-vcodec: fix two compiler warnings") fixed some of the problems that
were introduced at the same time, but missed two others.
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

Instead of hardcoding a timeout, let userspace change it dynamically
by adding a s_timeout ops.
Signed-off-by: NSean Young <sean@mess.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

The redrat3 sends an usb packet to the host either when the minimum pause
or the timeout occurs, so we can always add a trailing space in our
processing.
Signed-off-by: NSean Young <sean@mess.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

LIRC_SET_SEND_CARRIER should return 0 on success or -errno.
Signed-off-by: NSean Young <sean@mess.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

When s_tx_mask is given an invalid bitmask, the number of transmitters
should be returned. See the LIRC_SET_TRANSMITTER_MASK lirc ioctl
documentation.
Signed-off-by: NSean Young <sean@mess.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

The value 5 of the EEPROM_TS_MODE register (meaning dual tuner presence) is
only valid for AF9035 devices. For IT9135 devices it is invalid and led to a
false positive dual tuner mode detection with PCTV 79e.
Therefore on non-AF9035 devices and with value 5 the driver now defaults to
single tuner mode and outputs a regarding info message to log.

This fixes Bugzilla bug #118561.
Reported-by: NMarc Duponcheel <marc@offline.be>
Signed-off-by: NStefan Pöschel <basic.master@gmx.de>
Signed-off-by: NAntti Palosaari <crope@iki.fi>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

If a system configures the Nuvoton chip to use the alternative
EFM IO address (CR_EFIR2) then after probing the primary EFM IO
address (CR_EFIR) this region is not released.

If a driver for another function of the Nuvoton Super I/O
chip uses the same probing mechanism then it will hang if
loaded after the nuvoton-cir driver.
This was reported for the nct6775 hwmon driver.

Fix this by properly releasing the region after probing CR_EFIR.
This regression was introduced with kernel 4.6 so cc it to stable.
Reported-by: NAntti Seppälä <a.seppala@gmail.com>
Signed-off-by: NHeiner Kallweit <hkallweit1@gmail.com>
Tested-by: NAntti Seppälä <a.seppala@gmail.com>
Cc: <stable@vger.kernel.org> # 4.6.x-
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

Don't free the object until the file handle has been closed.  Fixes
use-after-free bug which occurs when I disconnect my DVB-S received
while VDR is running.

This is a crash dump of such a use-after-free:

    general protection fault: 0000 [#1] SMP
    CPU: 0 PID: 2541 Comm: CI adapter on d Not tainted 4.7.0-rc1-hosting+ #49
    Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011
    task: ffff880027d7ce00 ti: ffff88003d8f8000 task.ti: ffff88003d8f8000
    RIP: 0010:[<ffffffff812f3d1f>]  [<ffffffff812f3d1f>] dvb_ca_en50221_io_read_condition.isra.7+0x6f/0x150
    RSP: 0018:ffff88003d8fba98  EFLAGS: 00010206
    RAX: 0000000059534255 RBX: 000000753d470f90 RCX: ffff88003c74d181
    RDX: 00000001bea04ba9 RSI: ffff88003d8fbaf4 RDI: 3a3030a56d763fc0
    RBP: ffff88003d8fbae0 R08: ffff88003c74d180 R09: 0000000000000000
    R10: 0000000000000001 R11: 0000000000000000 R12: ffff88003c480e00
    R13: 00000000ffffffff R14: 0000000059534255 R15: 0000000000000000
    FS:  00007fb4209b4700(0000) GS:ffff88003fc00000(0000) knlGS:0000000000000000
    CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
    CR2: 00007f06445f4078 CR3: 000000003c55b000 CR4: 00000000000006b0
    Stack:
     ffff88003d8fbaf4 000000003c2170c0 0000000000004000 0000000000000000
     ffff88003c480e00 ffff88003d8fbc80 ffff88003c74d180 ffff88003d8fbb8c
     0000000000000000 ffff88003d8fbb10 ffffffff812f3e37 ffff88003d8fbb00
    Call Trace:
     [<ffffffff812f3e37>] dvb_ca_en50221_io_poll+0x37/0xa0
     [<ffffffff8113109b>] do_sys_poll+0x2db/0x520

This is a backtrace of the kernel attempting to lock a freed mutex:

    #0  0xffffffff81083d40 in rep_nop () at ./arch/x86/include/asm/processor.h:569
    #1  cpu_relax () at ./arch/x86/include/asm/processor.h:574
    #2  virt_spin_lock (lock=<optimized out>) at ./arch/x86/include/asm/qspinlock.h:57
    #3  native_queued_spin_lock_slowpath (lock=0xffff88003c480e90, val=761492029) at kernel/locking/qspinlock.c:304
    #4  0xffffffff810d1a06 in pv_queued_spin_lock_slowpath (val=<optimized out>, lock=<optimized out>) at ./arch/x86/include/asm/paravirt.h:669
    #5  queued_spin_lock_slowpath (val=<optimized out>, lock=<optimized out>) at ./arch/x86/include/asm/qspinlock.h:28
    #6  queued_spin_lock (lock=<optimized out>) at include/asm-generic/qspinlock.h:107
    #7  __mutex_lock_common (use_ww_ctx=<optimized out>, ww_ctx=<optimized out>, ip=<optimized out>, nest_lock=<optimized out>, subclass=<optimized out>,
        state=<optimized out>, lock=<optimized out>) at kernel/locking/mutex.c:526
    #8  mutex_lock_interruptible_nested (lock=0xffff88003c480e88, subclass=<optimized out>) at kernel/locking/mutex.c:647
    #9  0xffffffff812f49fe in dvb_ca_en50221_io_do_ioctl (file=<optimized out>, cmd=761492029, parg=0x1 <irq_stack_union+1>)
        at drivers/media/dvb-core/dvb_ca_en50221.c:1210
    #10 0xffffffff812ee660 in dvb_usercopy (file=<optimized out>, cmd=761492029, arg=<optimized out>, func=<optimized out>) at drivers/media/dvb-core/dvbdev.c:883
    #11 0xffffffff812f3410 in dvb_ca_en50221_io_ioctl (file=<optimized out>, cmd=<optimized out>, arg=<optimized out>) at drivers/media/dvb-core/dvb_ca_en50221.c:1284
    #12 0xffffffff8112eddd in vfs_ioctl (arg=<optimized out>, cmd=<optimized out>, filp=<optimized out>) at fs/ioctl.c:43
    #13 do_vfs_ioctl (filp=0xffff88003c480e90, fd=<optimized out>, cmd=<optimized out>, arg=<optimized out>) at fs/ioctl.c:674
    #14 0xffffffff8112f30c in SYSC_ioctl (arg=<optimized out>, cmd=<optimized out>, fd=<optimized out>) at fs/ioctl.c:689
    #15 SyS_ioctl (fd=6, cmd=2148298626, arg=140734533693696) at fs/ioctl.c:680
    #16 0xffffffff8103feb2 in entry_SYSCALL_64 () at arch/x86/entry/entry_64.S:207
Signed-off-by: NMax Kellermann <max@duempel.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

The wait_event() call in dvb_unregister_frontend() waits synchronously
for other tasks to free a file descriptor, but it does that while
holding several mutexes.  That alone is a bad idea, but if one user
process happens to keep a (defunct) file descriptor open indefinitely,
the kernel will correctly detect a hung task:

    INFO: task kworker/0:1:314 blocked for more than 30 seconds.
          Not tainted 4.7.0-rc1-hosting+ #50
    "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
    kworker/0:1     D ffff88003daf7a50     0   314      2 0x00000000
    Workqueue: usb_hub_wq hub_event
     ffff88003daf7a50 0000000000000296 ffff88003daf7a30 ffff88003fc13f98
     ffff88003dadce00 ffff88003daf8000 ffff88003e3fc010 ffff88003d48d4f8
     ffff88003e3b5030 ffff88003e3f8898 ffff88003daf7a68 ffffffff810cf860
    Call Trace:
     [<ffffffff810cf860>] schedule+0x30/0x80
     [<ffffffff812f88d3>] dvb_unregister_frontend+0x93/0xc0
     [<ffffffff8107a000>] ? __wake_up_common+0x80/0x80
     [<ffffffff813019c7>] dvb_usb_adapter_frontend_exit+0x37/0x70
     [<ffffffff81300614>] dvb_usb_exit+0x34/0xb0
     [<ffffffff81300d4a>] dvb_usb_device_exit+0x3a/0x50
     [<ffffffff81302dc2>] pctv452e_usb_disconnect+0x52/0x60
     [<ffffffff81295a07>] usb_unbind_interface+0x67/0x1e0
     [<ffffffff810609f3>] ? __blocking_notifier_call_chain+0x53/0x70
     [<ffffffff8127ba67>] __device_release_driver+0x77/0x110
     [<ffffffff8127c2d3>] device_release_driver+0x23/0x30
     [<ffffffff8127ab5d>] bus_remove_device+0x10d/0x150
     [<ffffffff8127879b>] device_del+0x13b/0x260
     [<ffffffff81299dea>] ? usb_remove_ep_devs+0x1a/0x30
     [<ffffffff8129468e>] usb_disable_device+0x9e/0x1e0
     [<ffffffff8128bb09>] usb_disconnect+0x89/0x260
     [<ffffffff8128db8d>] hub_event+0x30d/0xfc0
     [<ffffffff81059475>] process_one_work+0x1c5/0x4a0
     [<ffffffff8105940c>] ? process_one_work+0x15c/0x4a0
     [<ffffffff81059799>] worker_thread+0x49/0x480
     [<ffffffff81059750>] ? process_one_work+0x4a0/0x4a0
     [<ffffffff81059750>] ? process_one_work+0x4a0/0x4a0
     [<ffffffff8105f65e>] kthread+0xee/0x110
     [<ffffffff810400bf>] ret_from_fork+0x1f/0x40
     [<ffffffff8105f570>] ? __kthread_unpark+0x70/0x70
    5 locks held by kworker/0:1/314:
     #0:  ("usb_hub_wq"){......}, at: [<ffffffff8105940c>] process_one_work+0x15c/0x4a0
     #1:  ((&hub->events)){......}, at: [<ffffffff8105940c>] process_one_work+0x15c/0x4a0
     #2:  (&dev->mutex){......}, at: [<ffffffff8128d8cb>] hub_event+0x4b/0xfc0
     #3:  (&dev->mutex){......}, at: [<ffffffff8128bad2>] usb_disconnect+0x52/0x260
     #4:  (&dev->mutex){......}, at: [<ffffffff8127c2cb>] device_release_driver+0x1b/0x30

This patch removes the blocking wait, and postpones the kfree() call
until all file handles have been closed by using struct kref.
Signed-off-by: NMax Kellermann <max@duempel.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

Signed-off-by: NAayush Gupta <aayustark007@gmail.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

The LIRC_CAN_REC() returns a boolean "flag & LIRC_CAN_REC_MASK"
to check whether the device can receive data.
Signed-off-by: NAndi Shyti <andi.shyti@samsung.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

When opening or closing a lirc character device, the framework
provides to the user the possibility to keep track of opening or
closing of the device by calling two functions:

 - set_use_inc() when opening the device
 - set_use_dec() when closing the device

if those are not set by the lirc user, the system segfaults.
Check the pointer value before calling the above functions.
Signed-off-by: NAndi Shyti <andi.shyti@samsung.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

Signed-off-by: NAndi Shyti <andi.shyti@samsung.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

If ioctl is called, it cannot be a case of invalid system call
number (ENOSYS), that is a ENOTTY case which means that the
device doesn't support that specific ioctl command.

So, replace ENOSYS with ENOTTY.
Signed-off-by: NAndi Shyti <andi.shyti@samsung.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

When comparing a variable with a constant, the comparison should
start from the variable and not from the constant. It's also
written in the human DNA.

Swap the terms of comparisons whenever the constant comes first
and fix the following checkpatch warning:

  WARNING: Comparisons should place the constant on the right side of the test
Signed-off-by: NAndi Shyti <andi.shyti@samsung.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

The three if statements check the same thing, merge them in only
one statement.
Signed-off-by: NAndi Shyti <andi.shyti@samsung.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

There are two if ... else which check the same thing in different
part of the code, they can be merged in a single check.
Signed-off-by: NAndi Shyti <andi.shyti@samsung.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

The whole function is inside an 'if' statement
("if (ir->d.add_to_buf)").

Check the opposite of that statement at the beginning and exit,
this way we can have one level less of indentation.
Signed-off-by: NAndi Shyti <andi.shyti@samsung.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

... use "do .. while" instead.
Signed-off-by: NAndi Shyti <andi.shyti@samsung.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

The code can be rearranged so that some goto paths can be removed
Signed-off-by: NAndi Shyti <andi.shyti@samsung.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

This patch mutes also all the checkpatch warnings related to
printk.

Reword all the printouts so that the string doesn't need to be
split, which fixes the following checkpatch warning:

  WARNING: quoted string split across lines
Signed-off-by: NAndi Shyti <andi.shyti@samsung.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

Signed-off-by: NAndi Shyti <andi.shyti@samsung.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

Transmitters don't necessarily need to have a FIFO managed buffer
for their transfers.

When registering the driver, before allocating the buffer, check
whether the device is a transmitter or receiver. Allocate the
buffer only for receivers.
Signed-off-by: NAndi Shyti <andi.shyti@samsung.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

During the driver registration, move the buffer allocation on a
separate function.
Signed-off-by: NAndi Shyti <andi.shyti@samsung.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

The newly added FCP support in the vsp1 driver causes a link error
when CONFIG_RENESAS_FCP=m, since it's not reachable by built-in code:

drivers/media/built-in.o: In function `vsp1_remove':
:(.text+0xdeca0): undefined reference to `rcar_fcp_put'
drivers/media/built-in.o: In function `vsp1_probe':
:(.text+0xdef44): undefined reference to `rcar_fcp_get'

We already have a conditional dependency on FCP that requires
it for ARM64, so for all others we just have to prevent setting
RENESAS_VSP1=y when RENESAS_FCP=m by extending the FCP dependency.

Fixes: 94fcdf82 ("[media] v4l: vsp1: Add FCP support")
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

Building without CONFIG_PM results in a harmless warning from
slightly incorrect #ifdef guards:

drivers/media/platform/vsp1/vsp1_drv.c:525:12: error: 'vsp1_pm_runtime_resume' defined but not used [-Werror=unused-function]
drivers/media/platform/vsp1/vsp1_drv.c:516:12: error: 'vsp1_pm_runtime_suspend' defined but not used [-Werror=unused-function]

This removes the existing #ifdef and instead marks all four
PM functions as __maybe_unused.

Fixes: 1e6af546 ("[media] v4l: vsp1: Implement runtime PM support")
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

* topic/vsp1: (36 commits)
  [media] v4l: vsp1: wpf: Add flipping support
  [media] v4l: vsp1: rwpf: Support runtime modification of controls
  [media] v4l: vsp1: Simplify alpha propagation
  [media] v4l: vsp1: clu: Support runtime modification of controls
  [media] v4l: vsp1: lut: Support runtime modification of controls
  [media] v4l: vsp1: Support runtime modification of controls
  [media] v4l: vsp1: Add Cubic Look Up Table (CLU) support
  [media] v4l: vsp1: lut: Expose configuration through a control
  [media] v4l: vsp1: lut: Initialize the mutex
  [media] v4l: vsp1: dl: Don't free fragments with interrupts disabled
  [media] v4l: vsp1: Set entities functions
  [media] v4l: vsp1: Don't create LIF entity when the userspace API is enabled
  [media] v4l: vsp1: Don't register media device when userspace API is disabled
  [media] v4l: vsp1: Base link creation on availability of entities
  [media] media: Add video statistics computation functions
  [media] media: Add video processing entity functions
  [media] v4l: vsp1: sru: Fix intensity control ID
  [media] v4l: vsp1: Stop the pipeline upon the first STREAMOFF
  [media] v4l: vsp1: Constify operation structures
  [media] v4l: vsp1: pipe: Fix typo in comment
  ...

Now that the frame rate can be properly set, this commit adds support
for S_PARM and G_PARM.
Signed-off-by: NEzequiel Garcia <ezequiel@vanguardiasur.com.ar>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

Instead of using two tables to estimate the temporal decimation
factor, use a formula. This allows to get the closest fps, which
sounds better than the current tables.

Also, the current code doesn't store the real framerate.

This patch fixes the above issues.

[Ezequiel:
  - introduce a TW686X_MAX_FPS macro for max_fps.
  - use hweight_long instead of open coding the set bits count.]
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>
Signed-off-by: NEzequiel Garcia <ezequiel@vanguardiasur.com.ar>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

My static checker complains that if adap->props.num_frontends is 0 then
"ret" is uninitialized.  I don't think that can happen.  But "ret" is
always zero here so we can just remove the condition.

This extra check was added in commit 0d3ab841 ('[media] dvb core:
must check dvb_create_media_graph()').
Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

trivial fix to spelling mistake in dev_err message
Signed-off-by: NColin Ian King <colin.king@canonical.com>
Acked-by: NAbylay Ospan <aospan@netup.ru>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

Add the USB ID for Terratec Cinergy S2 Rev.3 (0ccd:0102).

Curiously dvb-usb-ids included already the USB ID for TERRATEC_CINERGY_S2_R3 even if the device was not supported.
Reported-by: NChristian Knippel <namerp@googlemail.com>
Signed-off-by: NOlli Salonen <olli.salonen@iki.fi>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

Tuning a card with Sony ASCOT2E produces the following error:

	kernel: i2c i2c-9: wr reg=0006: len=11 is too big!

MAX_WRITE_REGSIZE is defined as 10, buf[MAX_WRITE_REGSIZE + 1] buffer is
used in ascot2e_write_regs().

The problem is that exactly 10 bytes are written in ascot2e_set_params():

	/* Set BW_OFFSET (0x0F) value from parameter table */
	data[9] = ascot2e_sett[tv_system].bw_offset;
	ascot2e_write_regs(priv, 0x06, data, 10);

The test in write_regs is as follows:

	if (len + 1 >= sizeof(buf))

10 + 1 = 11 and that would be exactly the size of buf. Since 10 bytes +
buf[0] = reg would seem to fit into buf[], this shouldn't be an error.
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

Fixes the following sparse warning:

drivers/staging/media/pulse8-cec/pulse8-cec.c:427:27: warning:
 symbol 'pulse8_cec_adap_ops' was not declared. Should it be static?
Signed-off-by: NWei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

There is a error message within devm_ioremap_resource
already, so remove the dev_err call to avoid redundant
error message.
Signed-off-by: NWei Yongjun <yongjun_wei@trendmicro.com.cn>
Reviewed-by: NTiffany Lin <tiffany.lin@mediatek.com>
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

In case of error, the function devm_clk_get() returns ERR_PTR()
and not returns NULL. The NULL test in the return value check
should be replaced with IS_ERR().
Signed-off-by: NWei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

There is a error message within devm_ioremap_resource
already, so remove the dev_err call to avoid redundant
error message.
Signed-off-by: NWei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>