- 03 4月, 2022 2 次提交
-
-
由 Nikolay Aleksandrov 提交于
I made a stupid typo when adding the nexthop route warning selftest and added both $IP and ip after it (double ip) on the cleanup path. The error doesn't show up when running the test, but obviously it doesn't cleanup properly after it. Fixes: 392baa33 ("selftests: net: add delete nexthop route warning test") Signed-off-by: NNikolay Aleksandrov <razor@blackwall.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Bjorn Helgaas 提交于
Fix a few typos and minor grammatical issues. Signed-off-by: NBjorn Helgaas <bhelgaas@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 02 4月, 2022 2 次提交
-
-
由 Chen-Yu Tsai 提交于
In commit 9cbadf09 ("net: stmmac: support max-speed device tree property"), when DT platforms don't set "max-speed", max_speed is set to -1; for non-DT platforms, it stays the default 0. Prior to commit eeef2f6b ("net: stmmac: Start adding phylink support"), the check for a valid max_speed setting was to check if it was greater than zero. This commit got it right, but subsequent patches just checked for non-zero, which is incorrect for DT platforms. In commit 92c3807b ("net: stmmac: convert to phylink_get_linkmodes()") the conversion switched completely to checking for non-zero value as a valid value, which caused 1000base-T to stop getting advertised by default. Instead of trying to fix all the checks, simply leave max_speed alone if DT property parsing fails. Fixes: 9cbadf09 ("net: stmmac: support max-speed device tree property") Fixes: 92c3807b ("net: stmmac: convert to phylink_get_linkmodes()") Signed-off-by: NChen-Yu Tsai <wens@csie.org> Acked-by: NRussell King (Oracle) <rmk+kernel@armlinux.org.uk> Reviewed-by: NSrinivas Kandagatla <srinivas.kandagatla@linaro.org> Link: https://lore.kernel.org/r/20220331184832.16316-1-wens@kernel.orgSigned-off-by: NJakub Kicinski <kuba@kernel.org>
-
由 Dimitris Michailidis 提交于
32b builds with CONFIG_PHYS_ADDR_T_64BIT=y, such as i386 PAE, raise a linker error due to a 64b division: ld: drivers/net/ethernet/fungible/funcore/fun_dev.o: in function `fun_dev_enable': (.text+0xe1a): undefined reference to `__udivdi3' The divisor in the offendinng expression is a power of 2. Change it to use an explicit right shift. Fixes: e1ffcc66 ("net/fungible: Add service module for Fungible drivers") Reported-by: NRandy Dunlap <rdunlap@infradead.org> Signed-off-by: NDimitris Michailidis <dmichail@fungible.com> Link: https://lore.kernel.org/r/20220401232411.313881-1-dmichail@fungible.comSigned-off-by: NJakub Kicinski <kuba@kernel.org>
-
- 01 4月, 2022 19 次提交
-
-
由 David S. Miller 提交于
Nikolay Aleksandrov says: ==================== net: ipv4: fix nexthop route delete warning The first patch fixes a warning that can be triggered by deleting a nexthop route and specifying a device (more info in its commit msg). And the second patch adds a selftest for that case. Chose this way to fix it because we should match when deleting without nh spec and should fail when deleting a nexthop route with old-style nh spec because nexthop objects are managed separately, e.g.: $ ip r show 1.2.3.4/32 1.2.3.4 nhid 12 via 192.168.11.2 dev dummy0 $ ip r del 1.2.3.4/32 $ ip r del 1.2.3.4/32 nhid 12 <both should work> $ ip r del 1.2.3.4/32 dev dummy0 <should fail with ESRCH> v2: addded more to patch 01's commit message adjusted the test comment in patch 02 ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Nikolay Aleksandrov 提交于
Add a test which causes a WARNING on kernels which treat a nexthop route like a normal route when comparing for deletion and a device is specified. That is, a route is found but we hit a warning while matching it. The warning is from fib_info_nh() in include/net/nexthop.h because we run it on a fib_info with nexthop object. The call chain is: inet_rtm_delroute -> fib_table_delete -> fib_nh_match (called with a nexthop fib_info and also with fc_oif set thus calling fib_info_nh on the fib_info and triggering the warning). Repro steps: $ ip nexthop add id 12 via 172.16.1.3 dev veth1 $ ip route add 172.16.101.1/32 nhid 12 $ ip route delete 172.16.101.1/32 dev veth1 Signed-off-by: NNikolay Aleksandrov <razor@blackwall.org> Reviewed-by: NDavid Ahern <dsahern@kernel.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Nikolay Aleksandrov 提交于
FRR folks have hit a kernel warning[1] while deleting routes[2] which is caused by trying to delete a route pointing to a nexthop id without specifying nhid but matching on an interface. That is, a route is found but we hit a warning while matching it. The warning is from fib_info_nh() in include/net/nexthop.h because we run it on a fib_info with nexthop object. The call chain is: inet_rtm_delroute -> fib_table_delete -> fib_nh_match (called with a nexthop fib_info and also with fc_oif set thus calling fib_info_nh on the fib_info and triggering the warning). The fix is to not do any matching in that branch if the fi has a nexthop object because those are managed separately. I.e. we should match when deleting without nh spec and should fail when deleting a nexthop route with old-style nh spec because nexthop objects are managed separately, e.g.: $ ip r show 1.2.3.4/32 1.2.3.4 nhid 12 via 192.168.11.2 dev dummy0 $ ip r del 1.2.3.4/32 $ ip r del 1.2.3.4/32 nhid 12 <both should work> $ ip r del 1.2.3.4/32 dev dummy0 <should fail with ESRCH> [1] [ 523.462226] ------------[ cut here ]------------ [ 523.462230] WARNING: CPU: 14 PID: 22893 at include/net/nexthop.h:468 fib_nh_match+0x210/0x460 [ 523.462236] Modules linked in: dummy rpcsec_gss_krb5 xt_socket nf_socket_ipv4 nf_socket_ipv6 ip6table_raw iptable_raw bpf_preload xt_statistic ip_set ip_vs_sh ip_vs_wrr ip_vs_rr ip_vs xt_mark nf_tables xt_nat veth nf_conntrack_netlink nfnetlink xt_addrtype br_netfilter overlay dm_crypt nfsv3 nfs fscache netfs vhost_net vhost vhost_iotlb tap tun xt_CHECKSUM xt_MASQUERADE xt_conntrack 8021q garp mrp ipt_REJECT nf_reject_ipv4 ip6table_mangle ip6table_nat iptable_mangle iptable_nat nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 iptable_filter bridge stp llc rfcomm snd_seq_dummy snd_hrtimer rpcrdma rdma_cm iw_cm ib_cm ib_core ip6table_filter xt_comment ip6_tables vboxnetadp(OE) vboxnetflt(OE) vboxdrv(OE) qrtr bnep binfmt_misc xfs vfat fat squashfs loop nvidia_drm(POE) nvidia_modeset(POE) nvidia_uvm(POE) nvidia(POE) intel_rapl_msr intel_rapl_common snd_hda_codec_realtek snd_hda_codec_generic ledtrig_audio snd_hda_codec_hdmi btusb btrtl iwlmvm uvcvideo btbcm snd_hda_intel edac_mce_amd [ 523.462274] videobuf2_vmalloc videobuf2_memops btintel snd_intel_dspcfg videobuf2_v4l2 snd_intel_sdw_acpi bluetooth snd_usb_audio snd_hda_codec mac80211 snd_usbmidi_lib joydev snd_hda_core videobuf2_common kvm_amd snd_rawmidi snd_hwdep snd_seq videodev ccp snd_seq_device libarc4 ecdh_generic mc snd_pcm kvm iwlwifi snd_timer drm_kms_helper snd cfg80211 cec soundcore irqbypass rapl wmi_bmof i2c_piix4 rfkill k10temp pcspkr acpi_cpufreq nfsd auth_rpcgss nfs_acl lockd grace sunrpc drm zram ip_tables crct10dif_pclmul crc32_pclmul crc32c_intel ghash_clmulni_intel nvme sp5100_tco r8169 nvme_core wmi ipmi_devintf ipmi_msghandler fuse [ 523.462300] CPU: 14 PID: 22893 Comm: ip Tainted: P OE 5.16.18-200.fc35.x86_64 #1 [ 523.462302] Hardware name: Micro-Star International Co., Ltd. MS-7C37/MPG X570 GAMING EDGE WIFI (MS-7C37), BIOS 1.C0 10/29/2020 [ 523.462303] RIP: 0010:fib_nh_match+0x210/0x460 [ 523.462304] Code: 7c 24 20 48 8b b5 90 00 00 00 e8 bb ee f4 ff 48 8b 7c 24 20 41 89 c4 e8 ee eb f4 ff 45 85 e4 0f 85 2e fe ff ff e9 4c ff ff ff <0f> 0b e9 17 ff ff ff 3c 0a 0f 85 61 fe ff ff 48 8b b5 98 00 00 00 [ 523.462306] RSP: 0018:ffffaa53d4d87928 EFLAGS: 00010286 [ 523.462307] RAX: 0000000000000000 RBX: ffffaa53d4d87a90 RCX: ffffaa53d4d87bb0 [ 523.462308] RDX: ffff9e3d2ee6be80 RSI: ffffaa53d4d87a90 RDI: ffffffff920ed380 [ 523.462309] RBP: ffff9e3d2ee6be80 R08: 0000000000000064 R09: 0000000000000000 [ 523.462310] R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000031 [ 523.462310] R13: 0000000000000020 R14: 0000000000000000 R15: ffff9e3d331054e0 [ 523.462311] FS: 00007f245517c1c0(0000) GS:ffff9e492ed80000(0000) knlGS:0000000000000000 [ 523.462313] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 523.462313] CR2: 000055e5dfdd8268 CR3: 00000003ef488000 CR4: 0000000000350ee0 [ 523.462315] Call Trace: [ 523.462316] <TASK> [ 523.462320] fib_table_delete+0x1a9/0x310 [ 523.462323] inet_rtm_delroute+0x93/0x110 [ 523.462325] rtnetlink_rcv_msg+0x133/0x370 [ 523.462327] ? _copy_to_iter+0xb5/0x6f0 [ 523.462330] ? rtnl_calcit.isra.0+0x110/0x110 [ 523.462331] netlink_rcv_skb+0x50/0xf0 [ 523.462334] netlink_unicast+0x211/0x330 [ 523.462336] netlink_sendmsg+0x23f/0x480 [ 523.462338] sock_sendmsg+0x5e/0x60 [ 523.462340] ____sys_sendmsg+0x22c/0x270 [ 523.462341] ? import_iovec+0x17/0x20 [ 523.462343] ? sendmsg_copy_msghdr+0x59/0x90 [ 523.462344] ? __mod_lruvec_page_state+0x85/0x110 [ 523.462348] ___sys_sendmsg+0x81/0xc0 [ 523.462350] ? netlink_seq_start+0x70/0x70 [ 523.462352] ? __dentry_kill+0x13a/0x180 [ 523.462354] ? __fput+0xff/0x250 [ 523.462356] __sys_sendmsg+0x49/0x80 [ 523.462358] do_syscall_64+0x3b/0x90 [ 523.462361] entry_SYSCALL_64_after_hwframe+0x44/0xae [ 523.462364] RIP: 0033:0x7f24552aa337 [ 523.462365] Code: 0e 00 f7 d8 64 89 02 48 c7 c0 ff ff ff ff eb b9 0f 1f 00 f3 0f 1e fa 64 8b 04 25 18 00 00 00 85 c0 75 10 b8 2e 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 51 c3 48 83 ec 28 89 54 24 1c 48 89 74 24 10 [ 523.462366] RSP: 002b:00007fff7f05a838 EFLAGS: 00000246 ORIG_RAX: 000000000000002e [ 523.462368] RAX: ffffffffffffffda RBX: 000000006245bf91 RCX: 00007f24552aa337 [ 523.462368] RDX: 0000000000000000 RSI: 00007fff7f05a8a0 RDI: 0000000000000003 [ 523.462369] RBP: 0000000000000000 R08: 0000000000000001 R09: 0000000000000000 [ 523.462370] R10: 0000000000000008 R11: 0000000000000246 R12: 0000000000000001 [ 523.462370] R13: 00007fff7f05ce08 R14: 0000000000000000 R15: 000055e5dfdd1040 [ 523.462373] </TASK> [ 523.462374] ---[ end trace ba537bc16f6bf4ed ]--- [2] https://github.com/FRRouting/frr/issues/6412 Fixes: 4c7e8084 ("ipv4: Plumb support for nexthop object in a fib_info") Signed-off-by: NNikolay Aleksandrov <razor@blackwall.org> Reviewed-by: NDavid Ahern <dsahern@kernel.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Randy Dunlap 提交于
KS8851_MLL selects MICREL_PHY, which depends on PTP_1588_CLOCK_OPTIONAL, so make KS8851_MLL also depend on PTP_1588_CLOCK_OPTIONAL since 'select' does not follow any dependency chains. Fixes kconfig warning and build errors: WARNING: unmet direct dependencies detected for MICREL_PHY Depends on [m]: NETDEVICES [=y] && PHYLIB [=y] && PTP_1588_CLOCK_OPTIONAL [=m] Selected by [y]: - KS8851_MLL [=y] && NETDEVICES [=y] && ETHERNET [=y] && NET_VENDOR_MICREL [=y] && HAS_IOMEM [=y] ld: drivers/net/phy/micrel.o: in function `lan8814_ts_info': micrel.c:(.text+0xb35): undefined reference to `ptp_clock_index' ld: drivers/net/phy/micrel.o: in function `lan8814_probe': micrel.c:(.text+0x2586): undefined reference to `ptp_clock_register' Signed-off-by: NRandy Dunlap <rdunlap@infradead.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jakub Kicinski <kuba@kernel.org> Cc: Paolo Abeni <pabeni@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Matt Johnston says: ==================== MCTP fixes The following are fixes for the mctp core and mctp-i2c driver. ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Matt Johnston 提交于
Previously the skb was allocated with headroom MCTP_HEADER_MAXLEN, but that isn't sufficient if we are using devs that are not MCTP specific. This also adds a check that the smctp_halen provided to sendmsg for extended addressing is the correct size for the netdev. Fixes: 833ef3b9 ("mctp: Populate socket implementation") Reported-by: NMatthew Rinaldi <mjrinal@g.clemson.edu> Signed-off-by: NMatt Johnston <matt@codeconstruct.com.au> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Matt Johnston 提交于
header_ops.create should return the length of the header, instead mctp_i2c_head_create() returned 0. This didn't cause any problem because the MCTP stack accepted 0 as success. Fixes: f5b8abf9 ("mctp i2c: MCTP I2C binding driver") Signed-off-by: NMatt Johnston <matt@codeconstruct.com.au> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Matt Johnston 提交于
dev_hard_header() returns the length of the header, so we need to test for negative errors rather than non-zero. Fixes: 889b7da2 ("mctp: Add initial routing framework") Signed-off-by: NMatt Johnston <matt@codeconstruct.com.au> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Tony Nguyen says: ==================== ice-fixups This series handles a handful of cleanups for the ice driver. Ivan fixed a problem on the VSI during a release, fixing a MAC address setting, and a broken IFF_ALLMULTI handling. ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ivan Vecera 提交于
Handling of all-multicast flag and associated multicast promiscuous mode is broken in ice driver. When an user switches allmulticast flag on or off the driver checks whether any VLANs are configured over the interface (except default VLAN 0). If any extra VLANs are registered it enables multicast promiscuous mode for all these VLANs (including default VLAN 0) using ICE_SW_LKUP_PROMISC_VLAN look-up type. In this situation all multicast packets tagged with known VLAN ID or untagged are received and multicast packets tagged with unknown VLAN ID ignored. If no extra VLANs are registered (so only VLAN 0 exists) it enables multicast promiscuous mode for VLAN 0 and uses ICE_SW_LKUP_PROMISC look-up type. In this situation any multicast packets including tagged ones are received. The driver handles IFF_ALLMULTI in ice_vsi_sync_fltr() this way: ice_vsi_sync_fltr() { ... if (changed_flags & IFF_ALLMULTI) { if (netdev->flags & IFF_ALLMULTI) { if (vsi->num_vlans > 1) ice_set_promisc(..., ICE_MCAST_VLAN_PROMISC_BITS); else ice_set_promisc(..., ICE_MCAST_PROMISC_BITS); } else { if (vsi->num_vlans > 1) ice_clear_promisc(..., ICE_MCAST_VLAN_PROMISC_BITS); else ice_clear_promisc(..., ICE_MCAST_PROMISC_BITS); } } ... } The code above depends on value vsi->num_vlan that specifies number of VLANs configured over the interface (including VLAN 0) and this is problem because that value is modified in NDO callbacks ice_vlan_rx_add_vid() and ice_vlan_rx_kill_vid(). Scenario 1: 1. ip link set ens7f0 allmulticast on 2. ip link add vlan10 link ens7f0 type vlan id 10 3. ip link set ens7f0 allmulticast off 4. ip link set ens7f0 allmulticast on [1] In this scenario IFF_ALLMULTI is enabled and the driver calls ice_set_promisc(..., ICE_MCAST_PROMISC_BITS) that installs multicast promisc rule with non-VLAN look-up type. [2] Then VLAN with ID 10 is added and vsi->num_vlan incremented to 2 [3] Command switches IFF_ALLMULTI off and the driver calls ice_clear_promisc(..., ICE_MCAST_VLAN_PROMISC_BITS) but this call is effectively NOP because it looks for multicast promisc rules for VLAN 0 and VLAN 10 with VLAN look-up type but no such rules exist. So the all-multicast remains enabled silently in hardware. [4] Command tries to switch IFF_ALLMULTI on and the driver calls ice_clear_promisc(..., ICE_MCAST_PROMISC_BITS) but this call fails (-EEXIST) because non-VLAN multicast promisc rule already exists. Scenario 2: 1. ip link add vlan10 link ens7f0 type vlan id 10 2. ip link set ens7f0 allmulticast on 3. ip link add vlan20 link ens7f0 type vlan id 20 4. ip link del vlan10 ; ip link del vlan20 5. ip link set ens7f0 allmulticast off [1] VLAN with ID 10 is added and vsi->num_vlan==2 [2] Command switches IFF_ALLMULTI on and driver installs multicast promisc rules with VLAN look-up type for VLAN 0 and 10 [3] VLAN with ID 20 is added and vsi->num_vlan==3 but no multicast promisc rules is added for this new VLAN so the interface does not receive MC packets from VLAN 20 [4] Both VLANs are removed but multicast rule for VLAN 10 remains installed so interface receives multicast packets from VLAN 10 [5] Command switches IFF_ALLMULTI off and because vsi->num_vlan is 1 the driver tries to remove multicast promisc rule for VLAN 0 with non-VLAN look-up that does not exist. All-multicast looks disabled from user point of view but it is partially enabled in HW (interface receives all multicast packets either untagged or tagged with VLAN ID 10) To resolve these issues the patch introduces these changes: 1. Adds handling for IFF_ALLMULTI to ice_vlan_rx_add_vid() and ice_vlan_rx_kill_vid() callbacks. So when VLAN is added/removed and IFF_ALLMULTI is enabled an appropriate multicast promisc rule for that VLAN ID is added/removed. 2. In ice_vlan_rx_add_vid() when first VLAN besides VLAN 0 is added so (vsi->num_vlan == 2) and IFF_ALLMULTI is enabled then look-up type for existing multicast promisc rule for VLAN 0 is updated to ICE_MCAST_VLAN_PROMISC_BITS. 3. In ice_vlan_rx_kill_vid() when last VLAN besides VLAN 0 is removed so (vsi->num_vlan == 1) and IFF_ALLMULTI is enabled then look-up type for existing multicast promisc rule for VLAN 0 is updated to ICE_MCAST_PROMISC_BITS. 4. Both ice_vlan_rx_{add,kill}_vid() have to run under ICE_CFG_BUSY bit protection to avoid races with ice_vsi_sync_fltr() that runs in ice_service_task() context. 5. Bit ICE_VSI_VLAN_FLTR_CHANGED is use-less and can be removed. 6. Error messages added to ice_fltr_*_vsi_promisc() helper functions to avoid them in their callers 7. Small improvements to increase readability Fixes: 5eda8afd ("ice: Add support for PF/VF promiscuous mode") Signed-off-by: NIvan Vecera <ivecera@redhat.com> Reviewed-by: NJacob Keller <jacob.e.keller@intel.com> Signed-off-by: NAlice Michael <alice.michael@intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ivan Vecera 提交于
Commit 2ccc1c1c ("ice: Remove excess error variables") merged the usage of 'status' and 'err' variables into single one in function ice_set_mac_address(). Unfortunately this causes a regression when call of ice_fltr_add_mac() returns -EEXIST because this return value does not indicate an error in this case but value of 'err' remains to be -EEXIST till the end of the function and is returned to caller. Prior mentioned commit this does not happen because return value of ice_fltr_add_mac() was stored to 'status' variable first and if it was -EEXIST then 'err' remains to be zero. Fix the problem by reset 'err' to zero when ice_fltr_add_mac() returns -EEXIST. Fixes: 2ccc1c1c ("ice: Remove excess error variables") Signed-off-by: NIvan Vecera <ivecera@redhat.com> Reviewed-by: NJacob Keller <jacob.e.keller@intel.com> Acked-by: NAlexander Lobakin <alexandr.lobakin@intel.com> Signed-off-by: NAlice Michael <alice.michael@intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ivan Vecera 提交于
VSI is set as default forwarding one when promisc mode is set for PF interface, when PF is switched to switchdev mode or when VF driver asks to enable allmulticast or promisc mode for the VF interface (when vf-true-promisc-support priv flag is off). The third case is buggy because in that case VSI associated with VF remains as default one after VF removal. Reproducer: 1. Create VF echo 1 > sys/class/net/ens7f0/device/sriov_numvfs 2. Enable allmulticast or promisc mode on VF ip link set ens7f0v0 allmulticast on ip link set ens7f0v0 promisc on 3. Delete VF echo 0 > sys/class/net/ens7f0/device/sriov_numvfs 4. Try to enable promisc mode on PF ip link set ens7f0 promisc on Although it looks that promisc mode on PF is enabled the opposite is true because ice_vsi_sync_fltr() responsible for IFF_PROMISC handling first checks if any other VSI is set as default forwarding one and if so the function does not do anything. At this point it is not possible to enable promisc mode on PF without re-probe device. To resolve the issue this patch clear default forwarding VSI during ice_vsi_release() when the VSI to be released is the default one. Fixes: 01b5e89a ("ice: Add VF promiscuous support") Signed-off-by: NIvan Vecera <ivecera@redhat.com> Reviewed-by: NMichal Swiatkowski <michal.swiatkowski@linux.intel.com> Reviewed-by: NMaciej Fijalkowski <maciej.fijalkowski@intel.com> Signed-off-by: NAlice Michael <alice.michael@intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Vladimir Oltean 提交于
This reverts commit a1ff94c2. Switch drivers that don't implement ->port_change_mtu() will cause the DSA master to remain with an MTU of 1500, since we've deleted the other code path. In turn, this causes a regression for those systems, where MTU-sized traffic can no longer be terminated. Revert the change taking into account the fact that rtnl_lock() is now taken top-level from the callers of dsa_master_setup() and dsa_master_teardown(). Also add a comment in order for it to be absolutely clear why it is still needed. Fixes: a1ff94c2 ("net: dsa: stop updating master MTU from master.c") Reported-by: NLuiz Angelo Daros de Luca <luizluca@gmail.com> Signed-off-by: NVladimir Oltean <vladimir.oltean@nxp.com> Tested-by: NLuiz Angelo Daros de Luca <luizluca@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jean-Philippe Brucker 提交于
Fix a use-after-free when using page_pool with page fragments. We encountered this problem during normal RX in the hns3 driver: (1) Initially we have three descriptors in the RX queue. The first one allocates PAGE1 through page_pool, and the other two allocate one half of PAGE2 each. Page references look like this: RX_BD1 _______ PAGE1 RX_BD2 _______ PAGE2 RX_BD3 _________/ (2) Handle RX on the first descriptor. Allocate SKB1, eventually added to the receive queue by tcp_queue_rcv(). (3) Handle RX on the second descriptor. Allocate SKB2 and pass it to netif_receive_skb(): netif_receive_skb(SKB2) ip_rcv(SKB2) SKB3 = skb_clone(SKB2) SKB2 and SKB3 share a reference to PAGE2 through skb_shinfo()->dataref. The other ref to PAGE2 is still held by RX_BD3: SKB2 ---+- PAGE2 SKB3 __/ / RX_BD3 _________/ (3b) Now while handling TCP, coalesce SKB3 with SKB1: tcp_v4_rcv(SKB3) tcp_try_coalesce(to=SKB1, from=SKB3) // succeeds kfree_skb_partial(SKB3) skb_release_data(SKB3) // drops one dataref SKB1 _____ PAGE1 \____ SKB2 _____ PAGE2 / RX_BD3 _________/ In skb_try_coalesce(), __skb_frag_ref() takes a page reference to PAGE2, where it should instead have increased the page_pool frag reference, pp_frag_count. Without coalescing, when releasing both SKB2 and SKB3, a single reference to PAGE2 would be dropped. Now when releasing SKB1 and SKB2, two references to PAGE2 will be dropped, resulting in underflow. (3c) Drop SKB2: af_packet_rcv(SKB2) consume_skb(SKB2) skb_release_data(SKB2) // drops second dataref page_pool_return_skb_page(PAGE2) // drops one pp_frag_count SKB1 _____ PAGE1 \____ PAGE2 / RX_BD3 _________/ (4) Userspace calls recvmsg() Copies SKB1 and releases it. Since SKB3 was coalesced with SKB1, we release the SKB3 page as well: tcp_eat_recv_skb(SKB1) skb_release_data(SKB1) page_pool_return_skb_page(PAGE1) page_pool_return_skb_page(PAGE2) // drops second pp_frag_count (5) PAGE2 is freed, but the third RX descriptor was still using it! In our case this causes IOMMU faults, but it would silently corrupt memory if the IOMMU was disabled. Change the logic that checks whether pp_recycle SKBs can be coalesced. We still reject differing pp_recycle between 'from' and 'to' SKBs, but in order to avoid the situation described above, we also reject coalescing when both 'from' and 'to' are pp_recycled and 'from' is cloned. The new logic allows coalescing a cloned pp_recycle SKB into a page refcounted one, because in this case the release (4) will drop the right reference, the one taken by skb_try_coalesce(). Fixes: 53e0961d ("page_pool: add frag page recycling support in page pool") Suggested-by: NAlexander Duyck <alexanderduyck@fb.com> Signed-off-by: NJean-Philippe Brucker <jean-philippe@linaro.org> Reviewed-by: NYunsheng Lin <linyunsheng@huawei.com> Reviewed-by: NAlexander Duyck <alexanderduyck@fb.com> Acked-by: NIlias Apalodimas <ilias.apalodimas@linaro.org> Acked-by: NJesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eyal Birger 提交于
in commit 04893908 ("vrf: add mac header for tunneled packets when sniffer is attached") an Ethernet header was cooked for traffic originating from tunnel devices. However, the header is added based on whether the mac_header is unset and ignores cases where the device doesn't expose a mac header to upper layers, such as in ip tunnels like ipip and gre. Traffic originating from such devices still appears garbled when capturing on the vrf device. Fix by observing whether the original device exposes a header to upper layers, similar to the logic done in af_packet. In addition, skb->mac_len needs to be adjusted after adding the Ethernet header for the skb_push/pull() surrounding dev_queue_xmit_nit() to work on these packets. Fixes: 04893908 ("vrf: add mac header for tunneled packets when sniffer is attached") Signed-off-by: NEyal Birger <eyal.birger@gmail.com> Reviewed-by: NDavid Ahern <dsahern@kernel.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ziyang Xuan 提交于
The memory size of tls_ctx->rx.iv for AES128-CCM is 12 setting in tls_set_sw_offload(). The return value of crypto_aead_ivsize() for "ccm(aes)" is 16. So memcpy() require 16 bytes from 12 bytes memory space will trigger slab-out-of-bounds bug as following: ================================================================== BUG: KASAN: slab-out-of-bounds in decrypt_internal+0x385/0xc40 [tls] Read of size 16 at addr ffff888114e84e60 by task tls/10911 Call Trace: <TASK> dump_stack_lvl+0x34/0x44 print_report.cold+0x5e/0x5db ? decrypt_internal+0x385/0xc40 [tls] kasan_report+0xab/0x120 ? decrypt_internal+0x385/0xc40 [tls] kasan_check_range+0xf9/0x1e0 memcpy+0x20/0x60 decrypt_internal+0x385/0xc40 [tls] ? tls_get_rec+0x2e0/0x2e0 [tls] ? process_rx_list+0x1a5/0x420 [tls] ? tls_setup_from_iter.constprop.0+0x2e0/0x2e0 [tls] decrypt_skb_update+0x9d/0x400 [tls] tls_sw_recvmsg+0x3c8/0xb50 [tls] Allocated by task 10911: kasan_save_stack+0x1e/0x40 __kasan_kmalloc+0x81/0xa0 tls_set_sw_offload+0x2eb/0xa20 [tls] tls_setsockopt+0x68c/0x700 [tls] __sys_setsockopt+0xfe/0x1b0 Replace the crypto_aead_ivsize() with prot->iv_size + prot->salt_size when memcpy() iv value in TLS_1_3_VERSION scenario. Fixes: f295b3ae ("net/tls: Add support of AES128-CCM based ciphers") Signed-off-by: NZiyang Xuan <william.xuanziyang@huawei.com> Reviewed-by: NJakub Kicinski <kuba@kernel.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Taehee Yoo 提交于
After rx/tx ring buffer size is changed, kernel panic occurs when it acts XDP_TX or XDP_REDIRECT. When tx/rx ring buffer size is changed(ethtool -G), sfc driver reallocates and reinitializes rx and tx queues and their buffer (tx_queue->buffer). But it misses reinitializing xdp queues(efx->xdp_tx_queues). So, while it is acting XDP_TX or XDP_REDIRECT, it uses the uninitialized tx_queue->buffer. A new function efx_set_xdp_channels() is separated from efx_set_channels() to handle only xdp queues. Splat looks like: BUG: kernel NULL pointer dereference, address: 000000000000002a #PF: supervisor write access in kernel mode #PF: error_code(0x0002) - not-present page PGD 0 P4D 0 Oops: 0002 [#4] PREEMPT SMP NOPTI RIP: 0010:efx_tx_map_chunk+0x54/0x90 [sfc] CPU: 2 PID: 0 Comm: swapper/2 Tainted: G D 5.17.0+ #55 e8beeee8289528f11357029357cf Code: 48 8b 8d a8 01 00 00 48 8d 14 52 4c 8d 2c d0 44 89 e0 48 85 c9 74 0e 44 89 e2 4c 89 f6 48 80 RSP: 0018:ffff92f121e45c60 EFLAGS: 00010297 RIP: 0010:efx_tx_map_chunk+0x54/0x90 [sfc] RAX: 0000000000000040 RBX: ffff92ea506895c0 RCX: ffffffffc0330870 RDX: 0000000000000001 RSI: 00000001139b10ce RDI: ffff92ea506895c0 RBP: ffffffffc0358a80 R08: 00000001139b110d R09: 0000000000000000 R10: 0000000000000001 R11: ffff92ea414c0088 R12: 0000000000000040 R13: 0000000000000018 R14: 00000001139b10ce R15: ffff92ea506895c0 FS: 0000000000000000(0000) GS:ffff92f121ec0000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 Code: 48 8b 8d a8 01 00 00 48 8d 14 52 4c 8d 2c d0 44 89 e0 48 85 c9 74 0e 44 89 e2 4c 89 f6 48 80 CR2: 000000000000002a CR3: 00000003e6810004 CR4: 00000000007706e0 RSP: 0018:ffff92f121e85c60 EFLAGS: 00010297 PKRU: 55555554 RAX: 0000000000000040 RBX: ffff92ea50689700 RCX: ffffffffc0330870 RDX: 0000000000000001 RSI: 00000001145a90ce RDI: ffff92ea50689700 RBP: ffffffffc0358a80 R08: 00000001145a910d R09: 0000000000000000 R10: 0000000000000001 R11: ffff92ea414c0088 R12: 0000000000000040 R13: 0000000000000018 R14: 00000001145a90ce R15: ffff92ea50689700 FS: 0000000000000000(0000) GS:ffff92f121e80000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000000000000002a CR3: 00000003e6810005 CR4: 00000000007706e0 PKRU: 55555554 Call Trace: <IRQ> efx_xdp_tx_buffers+0x12b/0x3d0 [sfc 84c94b8e32d44d296c17e10a634d3ad454de4ba5] __efx_rx_packet+0x5c3/0x930 [sfc 84c94b8e32d44d296c17e10a634d3ad454de4ba5] efx_rx_packet+0x28c/0x2e0 [sfc 84c94b8e32d44d296c17e10a634d3ad454de4ba5] efx_ef10_ev_process+0x5f8/0xf40 [sfc 84c94b8e32d44d296c17e10a634d3ad454de4ba5] ? enqueue_task_fair+0x95/0x550 efx_poll+0xc4/0x360 [sfc 84c94b8e32d44d296c17e10a634d3ad454de4ba5] Fixes: 3990a8ff ("sfc: allocate channels for XDP tx queues") Signed-off-by: NTaehee Yoo <ap420073@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net由 Linus Torvalds 提交于
Pull more networking updates from Jakub Kicinski: "Networking fixes and rethook patches. Features: - kprobes: rethook: x86: replace kretprobe trampoline with rethook Current release - regressions: - sfc: avoid null-deref on systems without NUMA awareness in the new queue sizing code Current release - new code bugs: - vxlan: do not feed vxlan_vnifilter_dump_dev with non-vxlan devices - eth: lan966x: fix null-deref on PHY pointer in timestamp ioctl when interface is down Previous releases - always broken: - openvswitch: correct neighbor discovery target mask field in the flow dump - wireguard: ignore v6 endpoints when ipv6 is disabled and fix a leak - rxrpc: fix call timer start racing with call destruction - rxrpc: fix null-deref when security type is rxrpc_no_security - can: fix UAF bugs around echo skbs in multiple drivers Misc: - docs: move netdev-FAQ to the 'process' section of the documentation" * tag 'net-5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (57 commits) vxlan: do not feed vxlan_vnifilter_dump_dev with non vxlan devices openvswitch: Add recirc_id to recirc warning rxrpc: fix some null-ptr-deref bugs in server_key.c rxrpc: Fix call timer start racing with call destruction net: hns3: fix software vlan talbe of vlan 0 inconsistent with hardware net: hns3: fix the concurrency between functions reading debugfs docs: netdev: move the netdev-FAQ to the process pages docs: netdev: broaden the new vs old code formatting guidelines docs: netdev: call out the merge window in tag checking docs: netdev: add missing back ticks docs: netdev: make the testing requirement more stringent docs: netdev: add a question about re-posting frequency docs: netdev: rephrase the 'should I update patchwork' question docs: netdev: rephrase the 'Under review' question docs: netdev: shorten the name and mention msgid for patch status docs: netdev: note that RFC postings are allowed any time docs: netdev: turn the net-next closed into a Warning docs: netdev: move the patch marking section up docs: netdev: minor reword docs: netdev: replace references to old archives ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6由 Linus Torvalds 提交于
Pull crypto fixes from Herbert Xu: - Missing Kconfig dependency on arm that leads to boot failure - x86 SLS fixes - Reference leak in the stm32 driver * tag 'v5.18-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: crypto: x86/sm3 - Fixup SLS crypto: x86/poly1305 - Fixup SLS crypto: x86/chacha20 - Avoid spurious jumps to other functions crypto: stm32 - fix reference leak in stm32_crc_remove crypto: arm/aes-neonbs-cbc - Select generic cbc and aes
-
- 31 3月, 2022 17 次提交
-
-
由 Eric Dumazet 提交于
vxlan_vnifilter_dump_dev() assumes it is called only for vxlan devices. Make sure it is the case. BUG: KASAN: slab-out-of-bounds in vxlan_vnifilter_dump_dev+0x9a0/0xb40 drivers/net/vxlan/vxlan_vnifilter.c:349 Read of size 4 at addr ffff888060d1ce70 by task syz-executor.3/17662 CPU: 0 PID: 17662 Comm: syz-executor.3 Tainted: G W 5.17.0-syzkaller-12888-g77c9387c #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: <TASK> __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0xcd/0x134 lib/dump_stack.c:106 print_address_description.constprop.0.cold+0xeb/0x495 mm/kasan/report.c:313 print_report mm/kasan/report.c:429 [inline] kasan_report.cold+0xf4/0x1c6 mm/kasan/report.c:491 vxlan_vnifilter_dump_dev+0x9a0/0xb40 drivers/net/vxlan/vxlan_vnifilter.c:349 vxlan_vnifilter_dump+0x3ff/0x650 drivers/net/vxlan/vxlan_vnifilter.c:428 netlink_dump+0x4b5/0xb70 net/netlink/af_netlink.c:2270 __netlink_dump_start+0x647/0x900 net/netlink/af_netlink.c:2375 netlink_dump_start include/linux/netlink.h:245 [inline] rtnetlink_rcv_msg+0x70c/0xb80 net/core/rtnetlink.c:5953 netlink_rcv_skb+0x153/0x420 net/netlink/af_netlink.c:2496 netlink_unicast_kernel net/netlink/af_netlink.c:1319 [inline] netlink_unicast+0x543/0x7f0 net/netlink/af_netlink.c:1345 netlink_sendmsg+0x904/0xe00 net/netlink/af_netlink.c:1921 sock_sendmsg_nosec net/socket.c:705 [inline] sock_sendmsg+0xcf/0x120 net/socket.c:725 ____sys_sendmsg+0x6e2/0x800 net/socket.c:2413 ___sys_sendmsg+0xf3/0x170 net/socket.c:2467 __sys_sendmsg+0xe5/0x1b0 net/socket.c:2496 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x35/0x80 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x44/0xae RIP: 0033:0x7f87b8e89049 Fixes: f9c4bb0b ("vxlan: vni filtering support on collect metadata device") Signed-off-by: NEric Dumazet <edumazet@google.com> Reported-by: Nsyzbot <syzkaller@googlegroups.com> Acked-by: NRoopa Prabhu <roopa@nvidia.com> Link: https://lore.kernel.org/r/20220330194643.2706132-1-eric.dumazet@gmail.comSigned-off-by: NJakub Kicinski <kuba@kernel.org>
-
由 Stéphane Graber 提交于
When hitting the recirculation limit, the kernel would currently log something like this: [ 58.586597] openvswitch: ovs-system: deferred action limit reached, drop recirc action Which isn't all that useful to debug as we only have the interface name to go on but can't track it down to a specific flow. With this change, we now instead get: [ 58.586597] openvswitch: ovs-system: deferred action limit reached, drop recirc action (recirc_id=0x9e) Which can now be correlated with the flow entries from OVS. Suggested-by: NFrode Nordahl <frode.nordahl@canonical.com> Signed-off-by: NStéphane Graber <stgraber@ubuntu.com> Tested-by: NStephane Graber <stgraber@ubuntu.com> Acked-by: NEelco Chaudron <echaudro@redhat.com> Link: https://lore.kernel.org/r/20220330194244.3476544-1-stgraber@ubuntu.comSigned-off-by: NJakub Kicinski <kuba@kernel.org>
-
由 Jakub Kicinski 提交于
Merge tag 'linux-can-fixes-for-5.18-20220331' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can Marc Kleine-Budde says: ==================== pull-request: can 2022-03-31 The first patch is by Oliver Hartkopp and fixes MSG_PEEK feature in the CAN ISOTP protocol (broken in net-next for v5.18 only). Tom Rix's patch for the mcp251xfd driver fixes the propagation of an error value in case of an error. A patch by me for the m_can driver fixes a use-after-free in the xmit handler for m_can IP cores v3.0.x. Hangyu Hua contributes 3 patches fixing the same double free in the error path of the xmit handler in the ems_usb, usb_8dev and mcba_usb USB CAN driver. Pavel Skripkin contributes a patch for the mcba_usb driver to properly check the endpoint type. The last patch is by me and fixes a mem leak in the gs_usb, which was introduced in net-next for v5.18. * tag 'linux-can-fixes-for-5.18-20220331' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can: can: gs_usb: gs_make_candev(): fix memory leak for devices with extended bit timing configuration can: mcba_usb: properly check endpoint type can: mcba_usb: mcba_usb_start_xmit(): fix double dev_kfree_skb in error path can: usb_8dev: usb_8dev_start_xmit(): fix double dev_kfree_skb() in error path can: ems_usb: ems_usb_start_xmit(): fix double dev_kfree_skb() in error path can: m_can: m_can_tx_handler(): fix use after free of skb can: mcp251xfd: mcp251xfd_register_get_dev_id(): fix return of error value can: isotp: restore accidentally removed MSG_PEEK feature ==================== Link: https://lore.kernel.org/r/Signed-off-by: NJakub Kicinski <kuba@kernel.org>
-
由 Xiaolong Huang 提交于
Some function calls are not implemented in rxrpc_no_security, there are preparse_server_key, free_preparse_server_key and destroy_server_key. When rxrpc security type is rxrpc_no_security, user can easily trigger a null-ptr-deref bug via ioctl. So judgment should be added to prevent it The crash log: user@syzkaller:~$ ./rxrpc_preparse_s [ 37.956878][T15626] BUG: kernel NULL pointer dereference, address: 0000000000000000 [ 37.957645][T15626] #PF: supervisor instruction fetch in kernel mode [ 37.958229][T15626] #PF: error_code(0x0010) - not-present page [ 37.958762][T15626] PGD 4aadf067 P4D 4aadf067 PUD 4aade067 PMD 0 [ 37.959321][T15626] Oops: 0010 [#1] PREEMPT SMP [ 37.959739][T15626] CPU: 0 PID: 15626 Comm: rxrpc_preparse_ Not tainted 5.17.0-01442-gb47d5a4f #43 [ 37.960588][T15626] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-1ubuntu1 04/01/2014 [ 37.961474][T15626] RIP: 0010:0x0 [ 37.961787][T15626] Code: Unable to access opcode bytes at RIP 0xffffffffffffffd6. [ 37.962480][T15626] RSP: 0018:ffffc9000d9abdc0 EFLAGS: 00010286 [ 37.963018][T15626] RAX: ffffffff84335200 RBX: ffff888012a1ce80 RCX: 0000000000000000 [ 37.963727][T15626] RDX: 0000000000000000 RSI: ffffffff84a736dc RDI: ffffc9000d9abe48 [ 37.964425][T15626] RBP: ffffc9000d9abe48 R08: 0000000000000000 R09: 0000000000000002 [ 37.965118][T15626] R10: 000000000000000a R11: f000000000000000 R12: ffff888013145680 [ 37.965836][T15626] R13: 0000000000000000 R14: ffffffffffffffec R15: ffff8880432aba80 [ 37.966441][T15626] FS: 00007f2177907700(0000) GS:ffff88803ec00000(0000) knlGS:0000000000000000 [ 37.966979][T15626] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 37.967384][T15626] CR2: ffffffffffffffd6 CR3: 000000004aaf1000 CR4: 00000000000006f0 [ 37.967864][T15626] Call Trace: [ 37.968062][T15626] <TASK> [ 37.968240][T15626] rxrpc_preparse_s+0x59/0x90 [ 37.968541][T15626] key_create_or_update+0x174/0x510 [ 37.968863][T15626] __x64_sys_add_key+0x139/0x1d0 [ 37.969165][T15626] do_syscall_64+0x35/0xb0 [ 37.969451][T15626] entry_SYSCALL_64_after_hwframe+0x44/0xae [ 37.969824][T15626] RIP: 0033:0x43a1f9 Signed-off-by: NXiaolong Huang <butterflyhuangxx@gmail.com> Tested-by: NXiaolong Huang <butterflyhuangxx@gmail.com> Signed-off-by: NDavid Howells <dhowells@redhat.com> Acked-by: NMarc Dionne <marc.dionne@auristor.com> cc: linux-afs@lists.infradead.org Link: http://lists.infradead.org/pipermail/linux-afs/2022-March/005069.html Fixes: 12da59fc ("rxrpc: Hand server key parsing off to the security class") Link: https://lore.kernel.org/r/164865013439.2941502.8966285221215590921.stgit@warthog.procyon.org.ukSigned-off-by: NPaolo Abeni <pabeni@redhat.com>
-
由 David Howells 提交于
The rxrpc_call struct has a timer used to handle various timed events relating to a call. This timer can get started from the packet input routines that are run in softirq mode with just the RCU read lock held. Unfortunately, because only the RCU read lock is held - and neither ref or other lock is taken - the call can start getting destroyed at the same time a packet comes in addressed to that call. This causes the timer - which was already stopped - to get restarted. Later, the timer dispatch code may then oops if the timer got deallocated first. Fix this by trying to take a ref on the rxrpc_call struct and, if successful, passing that ref along to the timer. If the timer was already running, the ref is discarded. The timer completion routine can then pass the ref along to the call's work item when it queues it. If the timer or work item where already queued/running, the extra ref is discarded. Fixes: a158bdd3 ("rxrpc: Fix call timeouts") Reported-by: NMarc Dionne <marc.dionne@auristor.com> Signed-off-by: NDavid Howells <dhowells@redhat.com> Reviewed-by: NMarc Dionne <marc.dionne@auristor.com> Tested-by: NMarc Dionne <marc.dionne@auristor.com> cc: linux-afs@lists.infradead.org Link: http://lists.infradead.org/pipermail/linux-afs/2022-March/005073.html Link: https://lore.kernel.org/r/164865115696.2943015.11097991776647323586.stgit@warthog.procyon.org.ukSigned-off-by: NPaolo Abeni <pabeni@redhat.com>
-
由 Paolo Abeni 提交于
Guangbin Huang says: ==================== net: hns3: add two fixes for -net This series adds two fixes for the HNS3 ethernet driver. ==================== Link: https://lore.kernel.org/r/20220330134506.36635-1-huangguangbin2@huawei.comSigned-off-by: NPaolo Abeni <pabeni@redhat.com>
-
由 Guangbin Huang 提交于
When user delete vlan 0, as driver will not delete vlan 0 for hardware in function hclge_set_vlan_filter_hw(), so vlan 0 in software vlan talbe should not be deleted. Fixes: fe4144d4 ("net: hns3: sync VLAN filter entries when kill VLAN ID failed") Signed-off-by: NGuangbin Huang <huangguangbin2@huawei.com> Signed-off-by: NPaolo Abeni <pabeni@redhat.com>
-
由 Yufeng Mo 提交于
Currently, the debugfs mechanism is that all functions share a global variable to save the pointer for obtaining data. When different functions concurrently access the same file node, repeated release exceptions occur. Therefore, the granularity of the pointer for storing the obtained data is adjusted to be private for each function. Fixes: 5e69ea7e ("net: hns3: refactor the debugfs process") Signed-off-by: NYufeng Mo <moyufeng@huawei.com> Signed-off-by: NGuangbin Huang <huangguangbin2@huawei.com> Signed-off-by: NPaolo Abeni <pabeni@redhat.com>
-
由 Paolo Abeni 提交于
Jakub Kicinski says: ==================== docs: update and move the netdev-FAQ A section of documentation for tree-specific process quirks had been created a while back. There's only one tree in it, so far, the tip tree, but the contents seem to answer similar questions as we answer in the netdev-FAQ. Move the netdev-FAQ. Take this opportunity to touch up and update a few sections. v3: remove some confrontational? language from patch 7 v2: remove non-git in patch 3 add patch 5 ==================== Link: https://lore.kernel.org/r/20220330042505.2902770-1-kuba@kernel.orgSigned-off-by: NPaolo Abeni <pabeni@redhat.com>
-
由 Jakub Kicinski 提交于
The documentation for the tip tree is really in quite a similar spirit to the netdev-FAQ. Move the netdev-FAQ to the process docs as well. Signed-off-by: NJakub Kicinski <kuba@kernel.org> Reviewed-by: NFlorian Fainelli <f.fainelli@gmail.com> Signed-off-by: NPaolo Abeni <pabeni@redhat.com>
-
由 Jakub Kicinski 提交于
Convert the "should I use new or old comment formatting" to cover all formatting. This makes the question itself shorter. Signed-off-by: NJakub Kicinski <kuba@kernel.org> Reviewed-by: NFlorian Fainelli <f.fainelli@gmail.com> Signed-off-by: NPaolo Abeni <pabeni@redhat.com>
-
由 Jakub Kicinski 提交于
Add the most important case to the question about "where are we in the cycle" - the case of net-next being closed. Signed-off-by: NJakub Kicinski <kuba@kernel.org> Reviewed-by: NFlorian Fainelli <f.fainelli@gmail.com> Signed-off-by: NPaolo Abeni <pabeni@redhat.com>
-
由 Jakub Kicinski 提交于
I think double back ticks are more correct. Add where they are missing. Signed-off-by: NJakub Kicinski <kuba@kernel.org> Reviewed-by: NFlorian Fainelli <f.fainelli@gmail.com> Signed-off-by: NPaolo Abeni <pabeni@redhat.com>
-
由 Jakub Kicinski 提交于
These days we often ask for selftests so let's update our testing requirements. Signed-off-by: NJakub Kicinski <kuba@kernel.org> Reviewed-by: NFlorian Fainelli <f.fainelli@gmail.com> Signed-off-by: NPaolo Abeni <pabeni@redhat.com>
-
由 Jakub Kicinski 提交于
We have to tell people to stop reposting to often lately, or not to repost while the discussion is ongoing. Document this. Reviewed-by: NAndrew Lunn <andrew@lunn.ch> Signed-off-by: NJakub Kicinski <kuba@kernel.org> Reviewed-by: NFlorian Fainelli <f.fainelli@gmail.com> Signed-off-by: NPaolo Abeni <pabeni@redhat.com>
-
由 Jakub Kicinski 提交于
Make the question shorter and adjust the start of the answer accordingly. Signed-off-by: NJakub Kicinski <kuba@kernel.org> Reviewed-by: NFlorian Fainelli <f.fainelli@gmail.com> Signed-off-by: NPaolo Abeni <pabeni@redhat.com>
-
由 Jakub Kicinski 提交于
The semantics of "Under review" have shifted. Reword the question about it a bit and focus it on the response time. Signed-off-by: NJakub Kicinski <kuba@kernel.org> Reviewed-by: NFlorian Fainelli <f.fainelli@gmail.com> Signed-off-by: NPaolo Abeni <pabeni@redhat.com>
-