- 30 3月, 2009 1 次提交
-
-
由 Matt LaPlante 提交于
Signed-off-by: NMatt LaPlante <kernel1@cyberdogtech.com> Acked-by: NRandy Dunlap <randy.dunlap@oracle.com> Signed-off-by: NJiri Kosina <jkosina@suse.cz>
-
- 19 3月, 2009 6 次提交
-
-
由 Lopez Cruz, Misael 提交于
Headset was declared previously as a Headphone widget connecting HSMIC and HSOL/HSOR pins of TWL4030 codec in SDP430 machine driver. The capture path becomes invalid as the Headphone widget is not a valid input endpoint. Instead of that, the Headset is declared as separate Microphone and Headphone widgets. Current patch modifies audio map: - Headset Mic: HSMIC with bias - Headset Stereophone: HSOL, HSOR Signed-off-by: NMisael Lopez Cruz <x0052729@ti.com> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 Jarkko Nikula 提交于
Add functions "Headset" and "Mic" to the control "Jack Function" for activating and de-activating codec input pin LINE1L which is connected to the mic pin of 4-pole Nokia AV connecter. Note there is no mic bias voltage management here since bias is coming from Nokia ASIC and driver for it is not in mainline. Signed-off-by: NJarkko Nikula <jarkko.nikula@nokia.com> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 Jarkko Nikula 提交于
Signed-off-by: NJarkko Nikula <jarkko.nikula@nokia.com> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 Mark Brown 提交于
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 Mark Brown 提交于
There is an AVDD supply as well, normally one or more of the other upplies would be tied to it. Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 Mark Brown 提交于
The active discharge does not bring sufficient benefit to justify the lengthy times involved so don't do that. Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
- 17 3月, 2009 1 次提交
-
-
由 Atsushi Nemoto 提交于
The commit 14fa43f5 ("ASoC: Only register AC97 bus if it's not done already") added a condition for calling of soc_ac97_dev_register() but not added for calling of soc_ac97_dev_unregister(). This patch adds same condition for soc_ac97_dev_unregister(). Without this fix, kernel crashes when unloading an asoc driver. Signed-off-by: NAtsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
- 16 3月, 2009 3 次提交
-
-
由 Mark Brown 提交于
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 Mark Brown 提交于
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 Joonyoung Shim 提交于
CC sound/soc/codecs/twl4030.o sound/soc/codecs/twl4030.c:1400: warning: braces around scalar initializer sound/soc/codecs/twl4030.c:1400: warning: (near initialization for 'twl4030_dai.ops') sound/soc/codecs/twl4030.c:1401: error: field name not in record or union initializer sound/soc/codecs/twl4030.c:1401: error: (near initialization for 'twl4030_dai.ops') sound/soc/codecs/twl4030.c:1401: warning: initialization from incompatible pointer type sound/soc/codecs/twl4030.c:1402: error: field name not in record or union initializer sound/soc/codecs/twl4030.c:1402: error: (near initialization for 'twl4030_dai.ops') sound/soc/codecs/twl4030.c:1402: warning: excess elements in scalar initializer sound/soc/codecs/twl4030.c:1402: warning: (near initialization for 'twl4030_dai.ops') sound/soc/codecs/twl4030.c:1403: error: field name not in record or union initializer sound/soc/codecs/twl4030.c:1403: error: (near initialization for 'twl4030_dai.ops') sound/soc/codecs/twl4030.c:1403: warning: excess elements in scalar initializer sound/soc/codecs/twl4030.c:1403: warning: (near initialization for 'twl4030_dai.ops') Signed-off-by: NJoonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
- 14 3月, 2009 2 次提交
-
-
由 Mark Brown 提交于
This also simplifies the code a bit. Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 Mark Brown 提交于
Two issues are fixed here: - I2S transmits the left frame with the clock low but I don't seem to get LRCLK out without SFRMDLY being set so invert SFRMP and set a delay. - I2S has a clock cycle prior to the first data byte in each channel so we need to delay the data by one cycle. Tested-by: NDaniel Mack <daniel@caiaq.de> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
- 13 3月, 2009 2 次提交
-
-
由 Daniel Mack 提交于
This switches the pxa ssp port usage from network mode to PSP mode. Removed some comments and checks for configured TDM channels. A special case is added to support configuration where BCLK = 64fs. We need to do some black magic in this case which doesn't look nice but there is unfortunately no other option than that. Diagnosed-by: NTim Ruetz <tim@caiaq.de> Signed-off-by: NDaniel Mack <daniel@caiaq.de> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 Lopez Cruz, Misael 提交于
Move headset jack registration to the codec/machine specific initialization. Having the jack registration in machine init causes that the jack device gets initialized but not registered since the sound card is registered before the jack. Moving jack registration to device initialization will register the jack device along with all other devices associated to the card when the card is registed. As a consequence of jack device registered properly, the jack is detected as an input device. Signed-off-by: NMisael Lopez Cruz <x0052729@ti.com> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
- 12 3月, 2009 3 次提交
-
-
由 Philipp Zabel 提交于
The drivers are basically duplicating the same code over and over. As snd_soc_cnew is going to be made static some time after the next merge window, we might as well convert them now. Signed-off-by: NPhilipp Zabel <philipp.zabel@gmail.com> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 Mark Brown 提交于
Refactor the WM8580 device registration to probe via standard I2C device registration, registering the DAIs once the device has probed via I2C. Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 Mark Brown 提交于
The register values are all u32 so don't need the long format. Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
- 11 3月, 2009 4 次提交
-
-
由 Mark Brown 提交于
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 Mark Brown 提交于
The WM8400 is a highly integrated audio CODEC and power management unit intended for mobile multimedia application. This driver supports the primary audio CODEC features, including: - 1W speaker driver - Fully differential headphone output - Up to 4 differential microphone inputs Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 David Brownell 提交于
Buildfix: CC sound/soc/omap/osk5912.o sound/soc/omap/osk5912.c: In function 'osk_soc_init': sound/soc/omap/osk5912.c:189: error: implicit declaration of function 'clk_get_usecount' make[3]: *** [sound/soc/omap/osk5912.o] Error 1 There's no such (standard) clock interface. Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 Daniel Mack 提交于
In pxa_ssp_set_dai_fmt(), check whether there is anything to do at all. If there would be but the SSP port is in use already, bail out. Signed-off-by: NDaniel Mack <daniel@caiaq.de> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
- 10 3月, 2009 3 次提交
-
-
由 Hugo Villeneuve 提交于
Signed-off-by: NHugo Villeneuve <hugo@hugovil.com> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 Hugo Villeneuve 提交于
Signed-off-by: NHugo Villeneuve <hugo@hugovil.com> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 Mark Brown 提交于
This will break any boards that don't register the AC97 controller device due to using ASoC. Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
- 09 3月, 2009 6 次提交
-
-
由 Eric Miao 提交于
pxa-regs.h and hardware.h are not intended for use directly in driver code, remove those unnecessary references. Signed-off-by: NEric Miao <eric.miao@marvell.com>
-
由 Eric Miao 提交于
1. Driver code where pxa_request_dma() is called will most likely reference DMA registers as well, and it is really unnecessary to include pxa-regs.h just for this. Move the definitions into <mach/dma.h> and make relevant drivers include it instead of <mach/pxa-regs.h>. 2. Introduce DMAC_REGS_VIRT as the virtual address base for these DMA registers. This allows later processors to re-use the same IP while registers may start at different I/O address. Signed-off-by: NEric Miao <eric.miao@marvell.com>
-
由 Daniel Mack 提交于
This adds a driver for the SPI connected AK4104 S/PDIF transmitter device. Its features are fairly simple, but as there is need to set up certain bits in the IEC958 information, this better goes into a real driver. Signed-off-by: NDaniel Mack <daniel@caiaq.de> Cc: Mark Brown <broonie@sirena.org.uk> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 Takashi Iwai 提交于
Remove a non-existing Kconfig CONFIG_SND_SOC_WM8750_SPI. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Mark Brown 提交于
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 Daniel Mack 提交于
Removes numbers from the list of features/limitations and makes it reflect recent changes to the code. Signed-off-by: NDaniel Mack <daniel@caiaq.de> Acked-by: NTimur Tabi <timur@freescale.com> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
- 07 3月, 2009 4 次提交
-
-
由 Timur Tabi 提交于
Add support for true pause and unpause. Without this, mplayer will drop some audio (less than one second, but still noticeable) when pausing playback. Remove support for PM suspend and resume from the trigger function, since the driver doesn't support PM anyway. Optimize the delay after starting capture. Instead of delaying 1ms, the driver now polls the hardware. The new delay is shorter by over 90% yet still effective. Signed-off-by: NTimur Tabi <timur@freescale.com> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 Hugo Villeneuve 提交于
Signed-off-by: NHugo Villeneuve <hugo@hugovil.com> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 Mark Brown 提交于
Upgrade the severity of some failure messages from debug level so they're displayed by default. Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 Mark Brown 提交于
The recent set of S3C64xx patches re-added a lot of uses of DBG() that had previously been removed - revert this so the standard pr_debug() macro is used. Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
- 06 3月, 2009 5 次提交
-
-
由 Mark Brown 提交于
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 Mike Frysinger 提交于
Reported-by: NRob Maris <maris.rob@vdi.de> Signed-off-by: NMike Frysinger <vapier.adi@gmail.com> Signed-off-by: NBryan Wu <cooloney@kernel.org> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 Mike Frysinger 提交于
Signed-off-by: NMike Frysinger <vapier.adi@gmail.com> Signed-off-by: NBryan Wu <cooloney@kernel.org> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 Lopez Cruz, Misael 提交于
Add headset jack detection for SDP3430 boards using SoC jack reporting interface. Headset detection on SDP3430 board is achieved through TWL4030 GPIO_2 pin. Signed-off-by: NMisael Lopez Cruz <x0052729@ti.com> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 Timur Tabi 提交于
Add a new device tree property for the SSI node: "fsl,ssi-asynchronous". If defined, the SSI is programmed into asynchronous mode, otherwise it is programmed into synchronous mode. In asynchronous mode, pin SRCK must be connected to the same clock source as STFS, and pin SRFS must be connected to the same signal as STFS. Asynchronous mode allows playback and capture to use different sample sizes. It also technically allows different sample rates, but the driver does not support that. Signed-off-by: NTimur Tabi <timur@freescale.com> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-