On fclk dpm disabled, the default dpm table will be setup with only one
level and clock frequency as bootup value.
Signed-off-by: NEvan Quan <evan.quan@amd.com>
Reviewed-by: NKevin Wang <kevin1.wang@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

This is available with firmwareinfo table v3.2 or later.
Signed-off-by: NEvan Quan <evan.quan@amd.com>
Reviewed-by: NKevin Wang <kevin1.wang@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Do not expose those unsupported clock domains through sysfs on
Arcturus.
Signed-off-by: NEvan Quan <evan.quan@amd.com>
Reviewed-by: NKevin Wang <kevin1.wang@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Update smc fw and driver interface header.
Signed-off-by: NEvan Quan <evan.quan@amd.com>
Reviewed-by: NKevin Wang <kevin1.wang@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

remove duplicate macro smu_get_uclk_dpm_states in amdgpu_smu.h

"
 #define smu_get_uclk_dpm_states(smu, clocks_in_khz, num_states) \
         ((smu)->ppt_funcs->get_uclk_dpm_states ? (smu)->ppt_funcs->get_uclk_dpm_states((smu), (clocks_in_khz), (num_states)) : 0)
 #define smu_get_max_sustainable_clocks_by_dc(smu, max_clocks) \
         ((smu)->funcs->get_max_sustainable_clocks_by_dc ? (smu)->funcs->get_max_sustainable_clocks_by_dc((smu), (max_clocks)) : 0)
 #define smu_get_uclk_dpm_states(smu, clocks_in_khz, num_states) \
         ((smu)->ppt_funcs->get_uclk_dpm_states ? (smu)->ppt_funcs->get_uclk_dpm_states((smu), (clocks_in_khz), (num_states)) : 0)
"
Signed-off-by: NKevin Wang <kevin1.wang@amd.com>
Reviewed-by: NHuang Rui <ray.huang@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

fix size type errors, from uint32_t to uint16_t.
it will cause only initializes the highest 16 bits in
smu_get_atom_data_table function.

bug report:
This fixes the following static checker warning.
        drivers/gpu/drm/amd/amdgpu/../powerplay/smu_v11_0.c:390 smu_v11_0_setup_pptable()
        warn: passing casted pointer '&size' to 'smu_get_atom_data_table()' 32 vs 16.
Signed-off-by: NKevin Wang <kevin1.wang@amd.com>
Reported-by: NDan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: NEvan Quan <evan.quan@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

the bellow patch refine the sensor read sequence,
but missed to add arcuturs support. (arcuturs_ppt.c)
it will cause some sensor is not supported in arcturus.

drm/amd/powerplay: change smu_read_sensor sequence in smu
Signed-off-by: NKevin Wang <kevin1.wang@amd.com>
Reviewed-by: NEvan Quan <evan.quan@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

'_navi10_ip_offset_HEADER' is already used in 'navi10_ip_offset.h', so use
'_navi12_ip_offset_HEADER' instead here.
Reviewed-by: NXiaojie Yuan <xiaojie.yuan@amd.com>
Signed-off-by: NChristophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

so that more visible vram can be available for umd.

Reviewed-by: Christian König <christian.koenig@amd.com>.
Signed-off-by: NTianci.Yin <tianci.yin@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Signed-off-by: NXiaojie Yuan <xiaojie.yuan@amd.com>
Reviewed-by: NEvan Quan <evan.quan@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

The name field in node topology has not been used. We re-purpose it to
hold the asic name, which can be queried by user space applications
through sysfs.
Signed-off-by: NYong Zhao <Yong.Zhao@amd.com>
Reviewed-by: NFelix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

This is to improve performance.
Signed-off-by: NFeifei Xu <Feifei.Xu@amd.com>
Tested-by: NCandice Li <candice.li@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

firmware header information is printed for direct fw loading but not
added for psp fw loading yet

v2: squash in warning fix (Alex)
Signed-off-by: NXiaojie Yuan <xiaojie.yuan@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Signed-off-by: NXiaojie Yuan <xiaojie.yuan@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

s/r list in rlc firmware is ready, so remove the special autoload handling
Signed-off-by: NXiaojie Yuan <xiaojie.yuan@amd.com>
Acked-by: NAlex Deucher <alexander.deucher@amd.com>
Reviewed-by: NHawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why]
The only place where state->max_bpc is updated on the connector is
at the start of atomic check during drm_atomic_connector_check. It
isn't updated when adding the connectors to the atomic state after
the fact. It also doesn't necessarily reflect the right value when
called in amdgpu during mode validation outside of atomic check.

This can cause the wrong bpc to be used even if the max_requested_bpc
is the correct value.

[How]
Don't rely on state->max_bpc reflecting the real bpc value and just
do the min(...) based on display info bpc and max_requested_bpc.

Fixes: 01933ba4 ("drm/amd/display: Use current connector state if NULL when checking bpc")
Signed-off-by: NNicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: NLeo Li <sunpeng.li@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

We need to set certain power gating flags after we determine
if the firmware version is sufficient to support gfxoff.
Previously we set the pg flags in early init, but we later
we might have disabled gfxoff if the firmware versions didn't
support it.  Move adding the additional pg flags after we
determine whether or not to support gfxoff.

Fixes: 00544006 ("drm/amdgpu: enable gfxoff again on raven series (v2)")
Tested-by: NKai-Heng Feng <kai.heng.feng@canonical.com>
Tested-by: NTom St Denis <tom.stdenis@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Cc: Kai-Heng Feng <kai.heng.feng@canonical.com>

Integrate the mode2 reset into rest sequence.

v2:
Check ppfuncs pointer for NULL
Signed-off-by: NAndrey Grodzovsky <andrey.grodzovsky@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Reviewed-by: NEvan Quan <evan.quan@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Add callback to call the new mode2 reset interface.
Signed-off-by: NAndrey Grodzovsky <andrey.grodzovsky@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Reviewed-by: NEvan Quan <evan.quan@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Add implmenetion.
Signed-off-by: NAndrey Grodzovsky <andrey.grodzovsky@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Reviewed-by: NEvan Quan <evan.quan@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Also define reset modes (0, 1 and 2)
Signed-off-by: NAndrey Grodzovsky <andrey.grodzovsky@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Reviewed-by: NEvan Quan <evan.quan@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

By comparing to windows it means ASIC reset.
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAndrey Grodzovsky <andrey.grodzovsky@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Double defintion of 'i'
Signed-off-by: NAndrey Grodzovsky <andrey.grodzovsky@amd.com>
Reviewed-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

This fixes screen corruption/flickering on 75 Hz displays.

v2: make print statement debug only (Alex)

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=102646Reviewed-by: NEvan Quan <evan.quan@amd.com>
Signed-off-by: NAhzo <Ahzo@tutanota.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

When VM state changed and system in large bar mode,
make sure to use CPU update function, otherwise use
SDMA function.
Reviewed-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NGang Ba <gaba@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

The amdgpu_task_info will be used when printing VM page fault for KFD
processes.
Signed-off-by: NYong Zhao <Yong.Zhao@amd.com>
Acked-by: NChristian König <christian.koenig@amd.com>
Reviewed-by: NHarish Kasiviswanathan <harish.kasiviswanatha@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

We have done this for pre-GFX10 asics, but GFX10 did not pick up the
new change. The below is the commit message for that change.

This is recommended by HW designers. Previously when it was set to 1,
the PDE walk error in VM fault will be treated as
PERMISSION_OR_INVALID_PAGE_FAULT rather than usually expected OTHER_FAULT.
As a result, the retry control in VM_CONTEXT*_CNTL will change accordingly.

The above behavior is kind of abnormal. Furthermore, the
PDE_FAULT_CLASSIFICATION == 1 feature was targeted for very old ASICs
and it never made it way to production. Therefore, we should set it to 0.
Signed-off-by: NYong Zhao <Yong.Zhao@amd.com>
Reviewed-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

The printing we did for GFX9 was not propogated to GFX10 somehow, so fix
it now.
Signed-off-by: NYong Zhao <Yong.Zhao@amd.com>
Reviewed-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

RW is also useful in most cases.
Signed-off-by: NYong Zhao <Yong.Zhao@amd.com>
Reviewed-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Calling amdgpu function to invalidate TLB, instead of using a
kfd implementation. Delete the kfd local TLB invalidation
implementation.
Signed-off-by: NOak Zeng <Oak.Zeng@amd.com>
Reviewed-by: NChristian Konig <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

This is for kfd to reuse amdgpu TLB invalidation function.
On gfx10, kfd only needs to flush TLB on gfx hub but not
on mm hub. So export a function for KFD flush TLB only on
specific hub.
Signed-off-by: NOak Zeng <Oak.Zeng@amd.com>
Reviewed-by: NChristian Konig <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why]

Previous SOC bounding box firmware loading logic was for NV10, when we
still had it in firmware. Now that it's brought into driver code, and
NV12 BB is in firmware, this logic needs to be repurposed for NV12.

[How]

Set SOC_BOUNDING_BOX_VALID to false, and add the dcn_2_0_nv12_soc BB
struct. In init_soc_bounding_box, load firmware to nv12 BB instead.

In addition, conditionally update and patch the BB, depending on ASIC
REV.
Signed-off-by: NLeo Li <sunpeng.li@amd.com>
Reviewed-by: NHersen Wu <hersenxs.wu@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why]
DCN10 performs color processing before MPC combination, causes color
shift in RGB colorspaces when positive brightness offset is applied
However, YCbCr is still unfixed and remains disabled

[How]
Add layerIndex to dc_plane_state and dc_plane_info structs
Re-enable MPO when brightness is adjusted and colorspace is not YCbCr
Set rear plane's brightness offset to 0 when front plane visible
Signed-off-by: NMichael Strauss <michael.strauss@amd.com>
Reviewed-by: NAnthony Koo <Anthony.Koo@amd.com>
Acked-by: NLeo Li <sunpeng.li@amd.com>
Acked-by: NNicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[why]
disable_az_endpoint has been skipped because
dc->debug.az_endpoint_mute_only = true.

[how]
set dc->debug.az_endpoint_mute_only false when PPLIB’s PME notification function
 pointer is not NULL at the dcn10_resource construct function,because right now
 SMU/PPLIB and DAL all have the AZ D3 force PME notification implemented. AZ D3 should work.
Signed-off-by: Nyanyan kang <Yanyan.Kang@amd.com>
Reviewed-by: NCharlene Liu <Charlene.Liu@amd.com>
Acked-by: NLeo Li <sunpeng.li@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[why]
During detection link training if a display is disconnected,
the current code will retry 3 times of link training
on disconnected link before giving up.

[how]
Before each retry check for HPD status, only retry
verify link cap when HPD is still high.
Also put a 10ms delay between each retry to improve
the chance of success.
Signed-off-by: NWenjing Liu <Wenjing.Liu@amd.com>
Reviewed-by: NJun Lei <Jun.Lei@amd.com>
Acked-by: NAbdoulaye Berthe <Abdoulaye.Berthe@amd.com>
Acked-by: NLeo Li <sunpeng.li@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Enable dcn_mem_pwr as golden setting updates
Signed-off-by: NCharlene Liu <charlene.liu@amd.com>
Reviewed-by: NDmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Acked-by: NLeo Li <sunpeng.li@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Signed-off-by: NAnthony Koo <Anthony.Koo@amd.com>
Acked-by: NLeo Li <sunpeng.li@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Currently the paremeters are extracted as if dml is calculating
using pipes as we pass them in. in reality, dml internally merges
pipes into planes if pipe split is detected.

This change adds reverse logic to dcn20_calculate_dlg_params so
that the global sync parameters can be correctly extracted for
all the pipes when pipe split is enabled.
Signed-off-by: NDmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Reviewed-by: NCharlene Liu <Charlene.Liu@amd.com>
Acked-by: NLeo Li <sunpeng.li@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Signed-off-by: NAnthony Koo <Anthony.Koo@amd.com>
Acked-by: NLeo Li <sunpeng.li@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[why]
Some logs messages were not precise and some new log messages
were needed after "get packed PPS" function was introduced
Signed-off-by: NNikola Cornij <nikola.cornij@amd.com>
Reviewed-by: NWenjing Liu <Wenjing.Liu@amd.com>
Acked-by: NLeo Li <sunpeng.li@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>